public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v8 cluster,storage,docs,manager 00/43] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM
Date: Thu, 19 Nov 2026 20:46:05 +0100	[thread overview]
Message-ID: <20261119194655.3163258-1-t.lamprecht@proxmox.com> (raw)

This is v8 of the combined and reduced series of the cluster-wide
multipath work [0][1] and Dietmar's RFC for guided remote storage setup
and SAN visibility [2].

If nothing grave comes up I plan to apply this as is.

v8 is v7 [9] plus what an independent review of v7 turned up and held
up when checked against the code and the lab, i.e.:

 - A WWID that multipath refuses, for example because the overrides
   blacklist it, no longer stops the other WWIDs of a node or the reload
   of the configuration. The node reports it as an error and tries it
   again after five minutes, or after the overrides change; a multipath
   that hangs ends the additions of that pass.
 - The overrides also refuse a '{' that is not on the line of its
   section name: multipath only warns about that and applies the
   section, so a multipaths block could get past the check.
 - A drop-in is only replaced if its first line is exactly the generated
   one, no longer also with the header of the unreleased v1 to v3.
 - A wipe that finished no longer ends as a failed task if udev does not
   settle in time afterwards.
 - The guided setups are one class per transport, instead of functions
   on a namespace, and the note of the target step names the Next button
   through a placeholder for translators.
 - The setup procedure of the chapter keeps its steps short, with the
   Fibre Channel details and keeping a volume group after the list. It
   names multipath_component_detection and says that a portal a node
   cannot reach keeps the LUNs of the storage Degraded there.
 - A base volume is read as volume ID first, so a storage ID like
   'scsi-a' no longer confuses which LUN an LVM storage has as base in
   the LUN list and the status.
 - Smaller ones: descriptions for the fields of the cluster-wide status,
   if blocks instead of long post-ifs, clearer comments, test
   descriptions and commit messages, and the chapter says why all nodes
   need the upgrade first.

Blockbridge tested v7 with their plugin again, thanks! On their
suggestion, Node > SAN shows the namespace ID of an NVMe namespace in
the LUN column, now named LUN/NSID. Their note that a namespace their
plugin connected looks like a single-path one once a path is
disconnected led to two small changes: an explicit multipath entry for
an NVMe namespace is refused, as it showed the namespace as Missing on
every node and could not give it an expected path count, and the chapter
says that NVMe namespaces have none. A plugin method for the expected
paths of plugin volumes could follow as an addition.

What I left as is: points decided for v5 [3] to v7, such as the time
budget of the cluster lock for slow commands, storage IDs for node
auditors and a version check for mixed clusters, and master's behavior
of the other node disk endpoints, which keep allowing a Fibre Channel
LUN as local disk of one node.

Overview of what an admin gets with this:

 - Datacenter > Storage > SAN, a new entry below Storage, shows the
   multipath state of every node and of the LUNs that Proxmox VE
   manages or has a storage on, and edits the multipath entries and
   array-specific overrides. I explicitly chose this over the
   client/plugin side of Storage, as we do not have e.g. Ceph or
   ZFS/LVM/... creation in there either. We might want to rethink and
   consolidate our storage interface vs. management story in the
   future, but IMO a partial switch now is not worth it, that would add
   even more potential for confusion than the new SAN view.
 - Its Guided Setup menu leads through shared LVM on a LUN: for iSCSI it
   connects or reuses a target, with the initiator names of its nodes at
   hand, for Fibre Channel it takes a LUN the nodes already see. Both
   set up multipath and end with the state of the LUN on every node.
 - Datacenter > Storage > Add keeps its dialogs. The iSCSI one gets a
   Multipath option and the LVM one enables Shared for a base storage,
   and both point to the SAN view.
 - Node > SAN lists the LUNs of a node with their paths and usage, can
   wipe a LUN that no storage uses, and shows the iSCSI sessions.

The rules the series follows since v4: nodes add WWIDs and maps but
never remove them, a write is checked where it happens, lists do not
probe devices, there are no new iSCSI operations, the guided setup makes
the API calls an admin would make by hand, and multipath management is
turned on by the admin. The v4 cover [7] has the reasons.

Two things an admin will likely miss: there is no notification when a
LUN loses path redundancy, the state only shows on the SAN pages and in
the API. And Fibre Channel starts at a LUN the nodes already see; the
chapter gives the commands to list WWPNs and rescan the HBAs.

How it works:

 - /etc/pve/multipath.cfg holds explicit entries per WWID,
   /etc/pve/multipath-overrides.conf array settings; patch 01
   registers both. An iSCSI storage with the 'managed-multipath' option
   supplies its LUNs without entries. The option is not named
   'multipath', as third-party plugins use that name, and the storage
   layer leaves out a third-party plugin that declares a property of
   another plugin.
 - pvestatd calls one function of pve-storage per pass. It adds the
   WWIDs the node needs to /etc/multipath/wwids, writes the drop-ins
   /etc/multipath/conf.d/pve-*.conf, reloads multipathd after a change,
   and publishes the state of the maps that Proxmox VE manages or that a
   storage builds on through the node key-value store.
 - /cluster/multipath/status aggregates these reports;
   /cluster/multipath/{wwid,overrides} edit the two files;
   /nodes/{node}/scan/san-luns lists the LUNs of a node and
   /nodes/{node}/iscsi its sessions.
 - The volumes of an iSCSI storage with the option are named after the
   multipath map, so an LVM storage uses them through 'base' as before.
 - Volume group creation and wipe run under a cluster lock per LUN. They
   refuse a LUN that a storage uses or a process of the node has open,
   also through another path. Opens through another device node, such as
   one of a container, and users on other hosts are not seen.

Patches:

 - cluster 01: register the two configuration files
 - storage 02-26: helpers for the disk and iSCSI session inventory
   (mostly Dietmar's), the multipath library and configuration, the
   iSCSI option, the per-node apply and status with their API, the disk
   list of many disks, the LUN inventory, the read-only iSCSI status and
   the portal of an iSCSI path, volume groups on LUNs, the wipe and the
   process that has a LUN open
 - docs 27-28: the multipath chapter, rewritten around tasks, and the
   paragraph for a LUN that a process has open
 - manager 29-43: the pvestatd call, report and API mounts, then the
   views, the two dialog changes, the two guided setups, the note in the
   add dialogs, and the guest or process and the target of a LUN

Other changes since v7 [9]:

 - rebased onto current master

When applying, versioned dependencies have to be set: pve-manager on
libpve-storage-perl, and libpve-storage-perl (also as build dependency)
on the libpve-cluster-perl with patch 01, as PVE::Storage
registers the two files when it is loaded. pve-cluster with the same
patch keeps the version counters of the two files; with an older pmxcfs
they are read and parsed again on every request. pve-manager also needs
the pve-doc-generator (build) and pve-docs with the multipath chapter,
for its help links. With these versions set, the chapter's request to
upgrade all nodes before enabling the management could name them. If the
bound for LVM status commands [4] gets applied too, whichever is applied
second has to pass the status cache to the two lvm_vgs() calls of the
base volume activation, as they can block a status pass otherwise. Both
mark the cache of the status update with 'status_only', in the same
line.

The per-node target and portal series [5][6] are independent of this
one. It takes the LUNs of an iSCSI storage from the sessions of its one
target, so if a storage can have several targets per node, whichever is
applied second has to cover that.

I tested v8 on the lab of v4 [7] to v7, upgraded from the v7 build, with
the NVMe over Fabrics series and [4] on top. A WWID that the overrides
blacklist next to another let the other be added and its map assembled,
with the refusal shown for each node in the SAN view; the two forms of a
'{' apart from its section name were refused; a drop-in with the old
header stayed and the node said why. The iSCSI setup on the NetApp, the
Fibre Channel setup and the NVMe over Fabrics setup ran to the end with
the new classes, and two wipes ended as OK tasks. With five refused
WWIDs, every node named three and counted the other two, and lifting the
blacklist of one let it be added in the next pass. An unquoted value
with braces in the overrides got the hint to quote it. An LVM storage on
a LUN of a second iSCSI storage named 'scsi-n02' showed as its user in
the LUN list and the cluster status, and the wipe of the LUN was
refused. For the rest, the tests of v7 [9] and v6 [8] still apply.

[0]: https://lore.proxmox.com/pve-devel/20260626121000.2095591-1-t.lamprecht@proxmox.com/
[1]: https://lore.proxmox.com/pve-devel/20260703124707.1172980-2-t.lamprecht@proxmox.com/
[2]: https://lore.proxmox.com/pve-devel/20260731102156.3947857-1-dietmar@proxmox.com/
[3]: https://lore.proxmox.com/pve-devel/20261116012355.3187417-1-t.lamprecht@proxmox.com/
[4]: https://lore.proxmox.com/pve-devel/20261111015217.941220-1-t.lamprecht@proxmox.com/
[5]: https://lore.proxmox.com/pve-devel/20260430173220.441001-1-m.limbeck@proxmox.com/
[6]: https://lore.proxmox.com/pve-devel/20260804090819.2136483-1-dietmar@proxmox.com/
[7]: https://lore.proxmox.com/pve-devel/20261113030146.1559030-1-t.lamprecht@proxmox.com/
[8]: https://lore.proxmox.com/pve-devel/20261118065302.3033937-1-t.lamprecht@proxmox.com/
[9]: https://lore.proxmox.com/pve-devel/20261118202646.3017286-1-t.lamprecht@proxmox.com/

pve-cluster:

Thomas Lamprecht (1):
      cfs: observe the multipath configuration files

 src/PVE/Cluster.pm  | 2 ++
 src/pmxcfs/status.c | 2 ++
 2 files changed, 4 insertions(+)

pve-storage:

Dietmar Maurer (8):
      diskmanage: collect disk transport type from lsblk
      diskmanage: qualify NVMe over Fabrics transport
      diskmanage: optionally include iSCSI session devices in disk enumeration
      diskmanage: collect native NVMe multipath path state
      iscsi: factor out session device map from device list
      diskmanage: add helper to list multipath devices
      pvesm: expose the SAN LUN inventory
      api: add node-level iSCSI status

Thomas Lamprecht (17):
      multipath: add a library around multipathd
      multipath: add a cluster-wide configuration
      iscsi: add an option to manage storage LUNs with multipath
      lvm: activate a missing base volume before using the volume group
      multipath: apply the configuration on every node
      multipath: publish per-node status
      api: add endpoints for the cluster-wide multipath configuration
      api: multipath: add the cluster-wide health status
      diskmanage: look up the requested disks by name
      diskmanage: read the udev data of all disks with one call
      api: scan: add a SAN LUN inventory
      api: scan: name the portal of an iSCSI path
      disks: lvm: drop unused imports
      disks: lvm: allow volume groups on SAN LUNs and multipath maps
      disks: lvm: refuse to destroy the volume group of a shared storage
      disks: allow wiping a SAN LUN that no storage uses
      api: scan: report the process that has a SAN LUN open

 debian/control                                |   3 +-
 src/PVE/API2/Disks.pm                         |  47 +-
 src/PVE/API2/Disks/LVM.pm                     |  81 +-
 src/PVE/API2/ISCSI.pm                         | 166 +++++
 src/PVE/API2/Makefile                         |   2 +
 src/PVE/API2/Multipath.pm                     | 537 +++++++++++++
 src/PVE/API2/Storage/Scan.pm                  | 244 ++++++
 src/PVE/CLI/pvesm.pm                          |  15 +
 src/PVE/Diskmanage.pm                         | 386 ++++++++--
 src/PVE/ISCSI/Topology.pm                     |  89 +++
 src/PVE/Makefile                              |   6 +
 src/PVE/Multipath.pm                          | 213 ++++++
 src/PVE/Multipath/Config.pm                   | 215 ++++++
 src/PVE/Multipath/Generator.pm                | 156 ++++
 src/PVE/Multipath/Identity.pm                 |  44 ++
 src/PVE/Multipath/Status.pm                   | 229 ++++++
 src/PVE/Storage.pm                            |   2 +-
 src/PVE/Storage/ISCSIPlugin.pm                | 219 ++++--
 src/PVE/Storage/LVMPlugin.pm                  | 158 +++-
 src/PVE/Storage/Makefile                      |   3 +-
 src/PVE/Storage/SAN.pm                        | 463 ++++++++++++
 src/test/Makefile                             |  37 +-
 src/test/disk_api_test.pm                     | 314 ++++++++
 src/test/disk_tests/iscsi/disklist            |   1 +
 .../disk_tests/iscsi/disklist_expected.json   |  19 +
 src/test/disk_tests/iscsi/lsblk               |   5 +
 src/test/disk_tests/iscsi/sda/device/model    |   1 +
 src/test/disk_tests/iscsi/sda/device/vendor   |   1 +
 .../disk_tests/iscsi/sda/queue/rotational     |   1 +
 src/test/disk_tests/iscsi/sda/size            |   1 +
 src/test/disk_tests/iscsi/sda_udevadm         |  21 +
 src/test/disk_tests/multipath/disklist        |  11 +
 .../multipath/disklist_expected.json          | 107 +++
 src/test/disk_tests/multipath/dm-0/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-0/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-0/size       |   1 +
 src/test/disk_tests/multipath/dm-0_slaves     |   4 +
 src/test/disk_tests/multipath/dm-1/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-1/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-1/size       |   1 +
 src/test/disk_tests/multipath/dm-1_slaves     |   4 +
 src/test/disk_tests/multipath/dm-2/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-2/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-2/size       |   1 +
 src/test/disk_tests/multipath/dm-2_slaves     |   0
 src/test/disk_tests/multipath/dm-3/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-3/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-3/size       |   1 +
 src/test/disk_tests/multipath/dm-3_slaves     |   0
 src/test/disk_tests/multipath/dm-4/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-4/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-4/size       |   1 +
 src/test/disk_tests/multipath/dm-4_slaves     |   0
 src/test/disk_tests/multipath/lsblk           |  77 ++
 src/test/disk_tests/multipath/lvs             |   0
 src/test/disk_tests/multipath/mounts          |   1 +
 .../multipath/multipath_expected.json         |  59 ++
 src/test/disk_tests/multipath/multipathd      | 124 +++
 .../multipath/multipathd_status_expected.json |  40 +
 .../nvme-subsystem/nvme-subsys0/nvme3/address |   1 +
 .../nvme-subsys0/nvme3/nvme2c3n1/ana_state    |   1 +
 .../nvme-subsystem/nvme-subsys0/nvme3/state   |   1 +
 .../nvme-subsystem/nvme-subsys0/nvme4/address |   1 +
 .../nvme-subsys0/nvme4/nvme2c4n1/ana_state    |   1 +
 .../nvme-subsystem/nvme-subsys0/nvme4/state   |   1 +
 .../nvme-subsystem/nvme-subsys1/nvme0/address |   1 +
 .../nvme-subsystem/nvme-subsys1/nvme0/state   |   1 +
 .../disk_tests/multipath/nvme8n1/device/model |   1 +
 .../multipath/nvme8n1/device/transport        |   1 +
 .../multipath/nvme8n1/queue/rotational        |   1 +
 src/test/disk_tests/multipath/nvme8n1/size    |   1 +
 src/test/disk_tests/multipath/nvme8n1_udevadm |  14 +
 .../disk_tests/multipath/nvme9n1/device/model |   1 +
 .../multipath/nvme9n1/device/nvme5/transport  |   1 +
 .../multipath/nvme9n1/device/vendor           |   1 +
 .../multipath/nvme9n1/queue/rotational        |   1 +
 src/test/disk_tests/multipath/nvme9n1/size    |   1 +
 src/test/disk_tests/multipath/nvme9n1_udevadm |  12 +
 .../multipath/nvme_path_status_expected.json  |  19 +
 src/test/disk_tests/multipath/partlist        |   0
 src/test/disk_tests/multipath/pvs             |   1 +
 .../disk_tests/multipath/sda/device/model     |   1 +
 .../disk_tests/multipath/sda/device/vendor    |   1 +
 .../disk_tests/multipath/sda/holders/holder   |   1 +
 .../disk_tests/multipath/sda/queue/rotational |   1 +
 src/test/disk_tests/multipath/sda/size        |   1 +
 src/test/disk_tests/multipath/sda_udevadm     |  18 +
 .../disk_tests/multipath/sdb/device/model     |   1 +
 .../disk_tests/multipath/sdb/device/vendor    |   1 +
 .../disk_tests/multipath/sdb/holders/holder   |   1 +
 .../disk_tests/multipath/sdb/queue/rotational |   1 +
 src/test/disk_tests/multipath/sdb/size        |   1 +
 src/test/disk_tests/multipath/sdb_udevadm     |  18 +
 .../disk_tests/multipath/sdc/device/model     |   1 +
 .../disk_tests/multipath/sdc/device/vendor    |   1 +
 .../disk_tests/multipath/sdc/holders/holder   |   1 +
 .../disk_tests/multipath/sdc/queue/rotational |   1 +
 src/test/disk_tests/multipath/sdc/size        |   1 +
 src/test/disk_tests/multipath/sdc_udevadm     |  18 +
 .../disk_tests/multipath/sdd/device/model     |   1 +
 .../disk_tests/multipath/sdd/device/vendor    |   1 +
 .../disk_tests/multipath/sdd/holders/holder   |   1 +
 .../disk_tests/multipath/sdd/queue/rotational |   1 +
 src/test/disk_tests/multipath/sdd/size        |   1 +
 src/test/disk_tests/multipath/sdd_udevadm     |  18 +
 src/test/disk_tests/multipath/zpool           |   1 +
 .../disk_tests/sas/disklist_expected.json     |   1 +
 src/test/disk_tests/sas/lsblk                 |   5 +
 src/test/disklist_test.pm                     | 179 ++++-
 src/test/multipath-three-states.json          |  52 ++
 src/test/plugin_properties_test.pm            |   1 +
 src/test/run_disk_api_tests.pl                |  11 +
 src/test/run_iscsi_activation_tests.pl        | 109 +++
 src/test/run_lun_identity_tests.pl            |  57 ++
 src/test/run_multipath_api_tests.pl           | 705 ++++++++++++++++++
 src/test/run_multipath_tests.pl               | 194 +++++
 src/test/run_san_api_tests.pl                 | 124 +++
 src/test/run_san_library_tests.pl             | 135 ++++
 src/test/run_san_lun_scan_tests.pl            | 338 +++++++++
 src/test/run_san_nvme_tests.pl                | 122 +++
 src/test/run_san_taint_tests.pl               |  60 ++
 src/test/run_san_wipe_tests.pl                | 271 +++++++
 src/test/run_san_write_check_tests.pl         | 219 ++++++
 src/test/run_test_lvm_base_activation.pl      | 121 +++
 src/test/run_test_lvm_base_volume.pl          |  16 +-
 src/test/run_test_lvm_create.pl               |  46 ++
 126 files changed, 6846 insertions(+), 197 deletions(-)

pve-docs:

Thomas Lamprecht (2):
      storage: document the cluster-wide multipath management
      storage: multipath: describe the use shown for an open LUN

 pmxcfs.adoc                  |   2 +
 pve-storage-iscsi.adoc       |  11 ++
 pve-storage-iscsidirect.adoc |   2 +-
 pve-storage-lvm.adoc         |   3 +
 pve-storage-multipath.adoc   | 329 +++++++++++++++++++++++++++++++++++
 pvesm.adoc                   |  18 +-
 6 files changed, 359 insertions(+), 6 deletions(-)

pve-manager:

Dietmar Maurer (2):
      api: nodes: expose the iSCSI status
      ui: node: san: show iSCSI targets and sessions

Thomas Lamprecht (13):
      pvestatd: apply the multipath configuration and report the node status
      report: add the managed multipath configuration
      api: cluster: add the multipath endpoints
      ui: dc: add a SAN view
      ui: storage: iscsi: add the multipath option
      ui: lvm: enable shared when a base storage is selected
      ui: node: add SAN LUNs panel
      ui: node: san: wipe a LUN that no storage uses
      ui: dc: san: add a guided setup for shared LVM on iSCSI
      ui: dc: san: add a guided setup for shared LVM on Fibre Channel
      ui: storage: point the iSCSI and LVM add dialogs to the SAN view
      ui: san: show the guest or process that has a LUN open
      ui: node: san: add a column for the target or subsystem of a LUN

 PVE/API2/Cluster.pm                           |   7 +
 PVE/API2/Nodes.pm                             |   7 +
 PVE/Report.pm                                 |   3 +
 PVE/Service/pvestatd.pm                       |   7 +
 www/manager6/Makefile                         |  12 +
 www/manager6/SANUtils.js                      | 239 +++++++++++
 www/manager6/Utils.js                         |  19 +
 www/manager6/dc/Config.js                     |  23 +-
 www/manager6/dc/MultipathWwidEdit.js          |  81 ++++
 www/manager6/dc/SAN.js                        | 398 ++++++++++++++++++
 www/manager6/node/Config.js                   |  24 ++
 www/manager6/node/ISCSITargets.js             | 150 +++++++
 www/manager6/node/LVM.js                      |   5 +
 www/manager6/node/SANLuns.js                  | 233 ++++++++++
 www/manager6/storage/Base.js                  |   5 +
 www/manager6/storage/IScsiEdit.js             |  46 ++
 www/manager6/storage/LVMEdit.js               |   6 +
 www/manager6/storage/wizard/FibreChannel.js   | 196 +++++++++
 www/manager6/storage/wizard/IScsi.js          | 306 ++++++++++++++
 www/manager6/storage/wizard/LunSelect.js      | 224 ++++++++++
 www/manager6/storage/wizard/NodeIdentities.js |  94 +++++
 www/manager6/storage/wizard/Wizard.js         | 295 +++++++++++++
 www/manager6/window/SANLunState.js            | 119 ++++++
 www/manager6/window/SANLunWipe.js             |  64 +++
 24 files changed, 2557 insertions(+), 6 deletions(-)




             reply	other threads:[~2026-11-19 19:49 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19 19:46 Thomas Lamprecht [this message]
2026-11-19 19:46 ` [PATCH v8 cluster 01/43] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 02/43] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 03/43] diskmanage: qualify NVMe over Fabrics transport Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 04/43] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 05/43] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 06/43] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 07/43] multipath: add a library around multipathd Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 08/43] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 09/43] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 10/43] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 11/43] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 12/43] multipath: apply the configuration on every node Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 13/43] multipath: publish per-node status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 14/43] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 15/43] api: multipath: add the cluster-wide health status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 16/43] diskmanage: look up the requested disks by name Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 17/43] diskmanage: read the udev data of all disks with one call Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 18/43] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 19/43] pvesm: expose the " Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 20/43] api: add node-level iSCSI status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 21/43] api: scan: name the portal of an iSCSI path Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 22/43] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 23/43] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 24/43] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 25/43] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 26/43] api: scan: report the process that has a SAN LUN open Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 docs 27/43] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 docs 28/43] storage: multipath: describe the use shown for an open LUN Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 29/43] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 30/43] report: add the managed multipath configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 31/43] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 32/43] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 33/43] ui: dc: add a SAN view Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 34/43] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 35/43] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 36/43] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 37/43] ui: node: san: wipe a LUN that no storage uses Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 38/43] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 39/43] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 40/43] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 41/43] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 42/43] ui: san: show the guest or process that has a LUN open Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 43/43] ui: node: san: add a column for the target or subsystem of a LUN Thomas Lamprecht

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261119194655.3163258-1-t.lamprecht@proxmox.com \
    --to=t.lamprecht@proxmox.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal