From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v8 storage 16/43] diskmanage: look up the requested disks by name
Date: Thu, 19 Nov 2026 20:46:21 +0100 [thread overview]
Message-ID: <20261119194655.3163258-17-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261119194655.3163258-1-t.lamprecht@proxmox.com>
get_disks() turned the requested disks into one regular expression for
its walk over /sys/block. The partition lookup of each disk in that
walk goes through the same match with another expression, so perl
compiled the expression with all names again for every disk.
Other callers ask about a few disks only. But the SAN LUN inventory
that follows asks about every disk that is not a path of a multipath
map. On a lab node, the compiling cost 0.3 seconds for 1000 iSCSI
disks and 1.2 seconds for 2000. A disk name is no pattern, so look it
up as it is.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
src/PVE/Diskmanage.pm | 11 +++++++----
src/test/disklist_test.pm | 2 ++
2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/src/PVE/Diskmanage.pm b/src/PVE/Diskmanage.pm
index f1a5cd18..c4b4ce68 100644
--- a/src/PVE/Diskmanage.pm
+++ b/src/PVE/Diskmanage.pm
@@ -572,7 +572,7 @@ sub get_disks {
my $lvmhash = get_lvm_devices($lsblk_info, $san_inventory);
- my $disk_regex = ".*";
+ my $wanted;
if (defined($disks)) {
if (!ref($disks)) {
$disks = [$disks];
@@ -583,21 +583,24 @@ sub get_disks {
$_ =~ s|cciss/|cciss!| for @$disks;
if ($include_partitions) {
- # Proper blockdevice is needed for the regex, use parent for partitions.
+ # Proper blockdevice is needed for the lookup, use parent for partitions.
for my $disk ($disks->@*) {
next if !is_partition("/dev/$disk");
$disk = strip_dev(get_blockdev("/dev/$disk"));
}
}
- $disk_regex = "(?:" . join('|', @$disks) . ")";
+ # Not as one regex of all names: the lookup of the partitions of each disk below goes
+ # through the same match, so perl would compile that regex again for every disk.
+ $wanted = { map { $_ => 1 } @$disks };
}
dir_glob_foreach(
'/sys/block',
- $disk_regex,
+ '.*',
sub {
my ($dev) = @_;
+ return if $wanted && !$wanted->{$dev};
# whitelisting following devices
# - hdX ide block device
# - sdX scsi/sata block device
diff --git a/src/test/disklist_test.pm b/src/test/disklist_test.pm
index ef208aa3..1ad1cf66 100644
--- a/src/test/disklist_test.pm
+++ b/src/test/disklist_test.pm
@@ -226,6 +226,8 @@ sub test_disk_list {
$expected_disk_list->{$disk},
"disk $disk should be the same",
);
+ $testcount++;
+ is_deeply([keys %$disk_tmp], [$disk], "only disk $disk gets returned");
# test wrong parameter
eval { PVE::Diskmanage::get_disks({ test => 1 }); };
next prev parent reply other threads:[~2026-11-19 19:49 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 19:46 [PATCH v8 cluster,storage,docs,manager 00/43] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 cluster 01/43] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 02/43] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 03/43] diskmanage: qualify NVMe over Fabrics transport Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 04/43] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 05/43] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 06/43] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 07/43] multipath: add a library around multipathd Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 08/43] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 09/43] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 10/43] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 11/43] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 12/43] multipath: apply the configuration on every node Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 13/43] multipath: publish per-node status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 14/43] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 15/43] api: multipath: add the cluster-wide health status Thomas Lamprecht
2026-11-19 19:46 ` Thomas Lamprecht [this message]
2026-11-19 19:46 ` [PATCH v8 storage 17/43] diskmanage: read the udev data of all disks with one call Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 18/43] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 19/43] pvesm: expose the " Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 20/43] api: add node-level iSCSI status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 21/43] api: scan: name the portal of an iSCSI path Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 22/43] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 23/43] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 24/43] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 25/43] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 26/43] api: scan: report the process that has a SAN LUN open Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 docs 27/43] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 docs 28/43] storage: multipath: describe the use shown for an open LUN Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 29/43] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 30/43] report: add the managed multipath configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 31/43] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 32/43] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 33/43] ui: dc: add a SAN view Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 34/43] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 35/43] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 36/43] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 37/43] ui: node: san: wipe a LUN that no storage uses Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 38/43] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 39/43] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 40/43] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 41/43] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 42/43] ui: san: show the guest or process that has a LUN open Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 43/43] ui: node: san: add a column for the target or subsystem of a LUN Thomas Lamprecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119194655.3163258-17-t.lamprecht@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox