From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v8 manager 37/43] ui: node: san: wipe a LUN that no storage uses
Date: Thu, 19 Nov 2026 20:46:42 +0100 [thread overview]
Message-ID: <20261119194655.3163258-38-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261119194655.3163258-1-t.lamprecht@proxmox.com>
A recycled LUN often still carries a volume group or partitions from
its previous use and cannot be set up again until those are gone. Let
root@pam, the only user the wipe API accepts, wipe a LUN from
Node > SAN. As in the disk list of a node, a separator sets the button
apart from the others in the toolbar.
The dialog shows what the node knows about the content of the LUN. It
asks to confirm that no other host uses the LUN, as the checks of the
wipe only see such a use through a storage, and for the name of the
LUN. The dialog identifies the LUN by its name under /dev/disk/by-id,
which names its WWID. The button is disabled for a LUN without such a
name, and for a LUN that the list attributes to a storage. The list
shows cached state, so the check that the node does for the wipe itself
stays the one that counts.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
www/manager6/Makefile | 1 +
www/manager6/node/SANLuns.js | 18 +++++++++
www/manager6/window/SANLunWipe.js | 64 +++++++++++++++++++++++++++++++
3 files changed, 83 insertions(+)
create mode 100644 www/manager6/window/SANLunWipe.js
diff --git a/www/manager6/Makefile b/www/manager6/Makefile
index a1d4d5493..14020e8db 100644
--- a/www/manager6/Makefile
+++ b/www/manager6/Makefile
@@ -137,6 +137,7 @@ JSSRC= \
window/Restore.js \
window/SafeDestroyGuest.js \
window/SafeDestroyStorage.js \
+ window/SANLunWipe.js \
window/Settings.js \
window/Snapshot.js \
window/StartupEdit.js \
diff --git a/www/manager6/node/SANLuns.js b/www/manager6/node/SANLuns.js
index 8d96bd126..a8b6747e6 100644
--- a/www/manager6/node/SANLuns.js
+++ b/www/manager6/node/SANLuns.js
@@ -160,6 +160,24 @@ Ext.define('PVE.node.SANLunList', {
apiCallDone: (success) => success && reload(),
}),
},
+ '-',
+ {
+ xtype: 'proxmoxButton',
+ text: gettext('Wipe'),
+ iconCls: 'fa fa-eraser',
+ disabled: true,
+ enableFn: (rec) =>
+ Proxmox.UserName === 'root@pam' &&
+ !!rec.get('by-id') &&
+ !rec.get('used-by-storage'),
+ handler: (button, event, rec) =>
+ Ext.create('PVE.window.SANLunWipe', {
+ node: me.nodename,
+ lun: rec.data,
+ autoShow: true,
+ taskDone: () => !me.destroyed && reload(),
+ }),
+ },
'->',
gettext('Search') + ':',
' ',
diff --git a/www/manager6/window/SANLunWipe.js b/www/manager6/window/SANLunWipe.js
new file mode 100644
index 000000000..5a9d287e7
--- /dev/null
+++ b/www/manager6/window/SANLunWipe.js
@@ -0,0 +1,64 @@
+Ext.define('PVE.window.SANLunWipe', {
+ extend: 'Proxmox.window.Edit',
+ title: gettext('Wipe LUN'),
+ onlineHelp: 'storage_multipath',
+ width: 550,
+ isCreate: true,
+ showProgress: true,
+ submitText: gettext('Wipe'),
+ method: 'PUT',
+
+ initComponent: function () {
+ let me = this;
+ let lun = me.lun;
+ let name = lun.name || lun.wwid;
+ me.url = `/nodes/${me.node}/disks/wipedisk`;
+ me.extraRequestParams = { disk: lun['by-id'] };
+ me.items = [
+ {
+ xtype: 'component',
+ cls: 'pmx-hint',
+ html: Ext.htmlEncode(
+ Ext.String.format(
+ gettext(
+ 'Wipe LUN {0} using node "{1}"? All data on the LUN will be lost, for every host that accesses it!',
+ ),
+ name,
+ me.node,
+ ),
+ ),
+ },
+ {
+ xtype: 'displayfield',
+ fieldLabel: gettext('Used By'),
+ value: PVE.SANUtils.usageText(lun),
+ },
+ {
+ xtype: 'displayfield',
+ fieldLabel: gettext('Size'),
+ value: Proxmox.Utils.format_size(lun.size),
+ },
+ {
+ // the checks before the wipe see the storages of the cluster and the users of the LUN
+ // on this node, not what another host does with it
+ xtype: 'proxmoxcheckbox',
+ boxLabel: gettext('No other host uses the LUN'),
+ submitValue: false,
+ getErrors: function () {
+ return this.getValue()
+ ? []
+ : [gettext('Confirm that no other host uses the LUN.')];
+ },
+ },
+ {
+ xtype: 'textfield',
+ fieldLabel: `${gettext('Please enter the ID to confirm')} (${Ext.htmlEncode(name)})`,
+ labelAlign: 'top',
+ submitValue: false,
+ allowBlank: false,
+ validator: (value) => value === name || gettext('The ID does not match.'),
+ },
+ ];
+ me.callParent();
+ },
+});
next prev parent reply other threads:[~2026-11-19 19:51 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 19:46 [PATCH v8 cluster,storage,docs,manager 00/43] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 cluster 01/43] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 02/43] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 03/43] diskmanage: qualify NVMe over Fabrics transport Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 04/43] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 05/43] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 06/43] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 07/43] multipath: add a library around multipathd Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 08/43] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 09/43] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 10/43] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 11/43] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 12/43] multipath: apply the configuration on every node Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 13/43] multipath: publish per-node status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 14/43] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 15/43] api: multipath: add the cluster-wide health status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 16/43] diskmanage: look up the requested disks by name Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 17/43] diskmanage: read the udev data of all disks with one call Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 18/43] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 19/43] pvesm: expose the " Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 20/43] api: add node-level iSCSI status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 21/43] api: scan: name the portal of an iSCSI path Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 22/43] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 23/43] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 24/43] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 25/43] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 storage 26/43] api: scan: report the process that has a SAN LUN open Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 docs 27/43] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 docs 28/43] storage: multipath: describe the use shown for an open LUN Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 29/43] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 30/43] report: add the managed multipath configuration Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 31/43] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 32/43] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 33/43] ui: dc: add a SAN view Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 34/43] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 35/43] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 36/43] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-19 19:46 ` Thomas Lamprecht [this message]
2026-11-19 19:46 ` [PATCH v8 manager 38/43] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 39/43] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 40/43] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 41/43] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 42/43] ui: san: show the guest or process that has a LUN open Thomas Lamprecht
2026-11-19 19:46 ` [PATCH v8 manager 43/43] ui: node: san: add a column for the target or subsystem of a LUN Thomas Lamprecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119194655.3163258-38-t.lamprecht@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox