public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v6 cluster,storage,docs,manager 00/42] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM
Date: Wed, 18 Nov 2026 07:52:17 +0100	[thread overview]
Message-ID: <20261118065302.3033937-1-t.lamprecht@proxmox.com> (raw)

This is v6 of the combined and reduced series of the cluster-wide
multipath work [0][1] and Dietmar's RFC for guided remote storage setup
and SAN visibility [2].

v6 is v5 [3] rebased onto current master, where plugin API 17 with the
volume types, the plugin metadata for the web UI and the property
isolation for plugins landed underneath, plus what an independent review
of v5 turned up:

 - The status update no longer waits for the missing map of an LVM base
   volume, nor asks a hanging multipathd for its paths. With three such
   storages a pass took 32 seconds instead of 1.2 in my lab. Activating
   a volume for a guest still waits.
 - An existing volume group on a partition of a multipath map can be
   added again, also with the Multipath option of the iSCSI storage.
 - The node disk API only creates the storage of a volume group on a
   LUN; v5 could join a storage added meanwhile with another volume
   group.
 - The Fibre Channel setup waits for the volume group task itself and
   cannot be closed meanwhile. Closing the task window ended it with a
   volume group and no storage.
 - The setup menu also needs Datastore.Audit or Datastore.AllocateSpace.
 - The first status pass removed a drop-in with one of the generated
   names under /etc/multipath/conf.d, also one that Proxmox VE had not
   written. Such a file now stays, and the node reports an error while
   it needs that name.
 - The volume group creation and the wipe also refuse a LUN that is in
   use through another of its SCSI paths, for example by a guest started
   before the map existed. A name in the request has to lead to the same
   device after the LUN lookup still.
 - A node only reported the first of the storages that request a map.
 - Node > Disks > LVM creates a shared storage on a SAN LUN, on a single
   path for a Fibre Channel LUN without a map. Its dialog now points to
   the guided setup.
 - Enable Multipath under Node > SAN opens the entry dialog, where the
   admin sees and chooses the nodes, instead of adding an entry for all.
 - Smaller ones: partition bases and LUNs reached through two targets
   are attributed to their storage, Node > SAN shows the path counts of
   a degraded LUN, and the SAN view names the nodes in Unknown.
 - let the disk wipe take by-id, dm-N and mapper names for any device,
   so it also wiped a logical volume with a guest disk by such a name.
   These names are now accepted for a LUN only.

BlockBridge was very reactive here and tested v5 with 1000 LUNs or
namespaces on a node, one per guest disk. For them LUN inventory took
over ten seconds. New patches 16 and 17 look the disks up by name and
read the udev data with one call, which brought it to under a second for
1000 NVMe/TCP namespaces in my lab. The test also showed the disks of
running guests as unused, as no storage references them. New patches 25,
27, 41 and 42 show the guest or process that has a LUN open for writing,
and a hidden column for the iSCSI target, which names the volume for a
plugin with one target per volume. They come last in their repositories,
so that they can be left out; the NVMe over Fabrics series then applies
up to its last manager patch. A LUN that stays attached with nothing
holding it, for example after a failed detach, still shows as unused:
telling whose it is needs the plugin, and I left that for later.

What I left as is for now: lsblk for the usage of a LUN, as it opens no
device without a udev entry (measured again); 'auto_resize grow_only'
for all maps of a node, as multipath has no other form of it, documented
with how to turn it off; a node that drops the new option when it writes
storage.cfg before it is upgraded, which the chapter covers; and an
empty volume group that another node wipes right after its creation.

Overview of what an admin gets with this:

 - Datacenter > Storage > SAN, a new entry below Storage, shows the
   multipath state of every node and of the LUNs that Proxmox VE
   manages or has a storage on, and edits the multipath entries and
   array-specific overrides. I explicitly chose this over the
   client/plugin side of Storage, as we do not have e.g. Ceph or
   ZFS/LVM/... creation in there either. We might want to rethink and
   consolidate our storage interface vs. management story in the
   future, but IMO a partial switch now is not worth it, that would add
   even more potential for confusion than the new SAN view.
 - Its Guided Setup menu leads through shared LVM on a LUN: for iSCSI it
   connects or reuses a target, with the initiator names of all nodes at
   hand, for Fibre Channel it takes a LUN the nodes already see. Both
   set up multipath and end with the state of the LUN on every node.
 - Datacenter > Storage > Add keeps its dialogs. The iSCSI one gets a
   Multipath option and the LVM one enables Shared for a base storage,
   and both point to the SAN view.
 - Node > SAN lists the LUNs of a node with their paths and usage, can
   wipe a LUN that no storage uses, and shows the iSCSI sessions.

The rules the series follows since v4: nodes add WWIDs and maps but
never remove them, a write is checked where it happens, lists do not
probe devices, there are no new iSCSI operations, the guided setup makes
the API calls an admin would make by hand, and multipath management is
turned on by the admin. The v4 cover [7] has the reasons.

Two things an admin will likely miss: there is no notification when a
LUN loses path redundancy, the state only shows on the SAN pages and in
the API. And Fibre Channel starts at a LUN the nodes already see; the
chapter gives the commands to list WWPNs and rescan the HBAs.

How it works:

 - /etc/pve/multipath.cfg holds explicit entries per WWID,
   /etc/pve/multipath-overrides.conf array settings; patch 01
   registers both. An iSCSI storage with the 'managed-multipath' option
   supplies its LUNs without entries. The option is not named
   'multipath', as third-party plugins use that name, and the storage
   layer leaves out a third-party plugin that declares a property of
   another plugin.
 - pvestatd calls one function of pve-storage per pass. It adds the
   WWIDs the node needs to /etc/multipath/wwids, writes the drop-ins
   /etc/multipath/conf.d/pve-*.conf, reloads multipathd after a change,
   and publishes the state of the maps that Proxmox VE manages or that a
   storage builds on through the node key-value store.
 - /cluster/multipath/status aggregates these reports;
   /cluster/multipath/{wwid,overrides} edit the two files;
   /nodes/{node}/scan/san-luns lists the LUNs of a node and
   /nodes/{node}/iscsi its sessions.
 - The volumes of an iSCSI storage with the option are named after the
   multipath map, so an LVM storage uses them through 'base' as before.
 - Volume group creation and wipe run under a cluster lock per LUN. They
   refuse a LUN that a storage uses or a process of the node has open,
   also through another path. Opens through another device node, such as
   one of a container, and users on other hosts are not seen.

Patches:

 - cluster 01: register the two configuration files
 - storage 02-25: helpers for the disk and iSCSI session inventory
   (mostly Dietmar's), the multipath library and configuration, the
   iSCSI option, the per-node apply and status with their API, the disk
   list of many disks, the LUN inventory, the read-only iSCSI status,
   volume groups on LUNs, the wipe and the process that has a LUN open
 - docs 26-27: the multipath chapter, rewritten around tasks, and the
   paragraph for a LUN that a process has open
 - manager 28-42: the pvestatd call, report and API mounts, then the
   views, the two dialog changes, the two guided setups, the note in the
   add dialogs, and the guest or process and the target of a LUN

Other changes since v5 [3]:

 - rebased onto current master in all four repositories, with the plugin
   metadata for the iSCSI option and its entry in the pinned property
   list
 - the setup menu is named Guided Setup instead of Add Storage, as three
   different things in two views were called add
 - search fields in the LUN lists and the iSCSI tree, which on a node
   also match path devices and WWPNs, for example one from the kernel
   log
 - the process check compares device numbers, and the volume group check
   refuses a volume group that any storage names
 - style fixes, warnings of three test files, and shorter commit
   messages

When applying, versioned dependencies have to be set: pve-manager on
libpve-storage-perl, and libpve-storage-perl (also as build dependency)
on the libpve-cluster-perl with patch 01, as PVE::Storage
registers the two files when it is loaded. pve-manager also needs the
pve-doc-generator (build) and pve-docs with the multipath chapter, for
its help links. If the bound for LVM status commands [4] gets applied
too, whichever is applied second has to pass the status cache to the two
lvm_vgs() calls of the base volume activation, as they can block a
status pass otherwise. Both mark the cache of the status update with
'status_only', in the same line.

The per-node target and portal series [5][6] are independent of this
one. It takes the LUNs of an iSCSI storage from the sessions of its one
target, so if a storage can have several targets per node, whichever is
applied second has to cover that.

I tested on the lab of v4 [7] and v5: a six-node nested cluster with a
NetApp AFF A20 (three iSCSI portals, NVMe/TCP), Linux LIO targets and
software FCoE, upgraded from the v5 build, with the NVMe over Fabrics
series and [4] on top. Most review fixes ran as drills against the fault
they fix, a few have unit tests only. Both guided setups ended optimal
on six nodes, the Fibre Channel one also with a failing task, delayed
and cut-off status requests and Escape pressed during the wait. A guest
on NetApp, Fibre Channel and NVMe/TCP disks went through snapshots, live
migrations, a path cut under I/O, an online resize and a node reboot
with checksums compared. The scale test ran with 1000 NVMe/TCP
namespaces and with 1000 iSCSI LUNs with maps; the disk list and the LUN
inventory gave the same result with the one udev call and with a query
per disk, also on the other five nodes. Guests with a NetApp map, a
Fibre Channel LUN or an NVMe/TCP namespace as disk, also on one path of
a map, showed in the LUN lists, and the wipe and the volume group
creation refused these LUNs. Most of this ran on builds before the last
fixes, which got drills of their own. I looked at each changed view and
dialog in the web UI.

Not repeated for v6: a path cut on Fibre Channel, the CLI procedure, a
LUN that one node is not allowed to see, all paths down with queued I/O,
the SAN views with a stopped multipathd, the multipath status of a node
with 1000 foreign maps and the series installed alone.

[0]: https://lore.proxmox.com/pve-devel/20260626121000.2095591-1-t.lamprecht@proxmox.com/
[1]: https://lore.proxmox.com/pve-devel/20260703124707.1172980-2-t.lamprecht@proxmox.com/
[2]: https://lore.proxmox.com/pve-devel/20260731102156.3947857-1-dietmar@proxmox.com/
[3]: https://lore.proxmox.com/pve-devel/20261116012355.3187417-1-t.lamprecht@proxmox.com/
[4]: https://lore.proxmox.com/pve-devel/20261111015217.941220-1-t.lamprecht@proxmox.com/
[5]: https://lore.proxmox.com/pve-devel/20260430173220.441001-1-m.limbeck@proxmox.com/
[6]: https://lore.proxmox.com/pve-devel/20260804090819.2136483-1-dietmar@proxmox.com/
[7]: https://lore.proxmox.com/pve-devel/20261113030146.1559030-1-t.lamprecht@proxmox.com/

pve-cluster:

Thomas Lamprecht (1):
      cfs: observe the multipath configuration files

 src/PVE/Cluster.pm  | 2 ++
 src/pmxcfs/status.c | 2 ++
 2 files changed, 4 insertions(+)

pve-storage:

Dietmar Maurer (8):
      diskmanage: collect disk transport type from lsblk
      diskmanage: qualify NVMe over fabrics transport
      diskmanage: optionally include iSCSI session devices in disk enumeration
      diskmanage: collect native NVMe multipath path state
      iscsi: factor out session device map from device list
      diskmanage: add helper to list multipath devices
      pvesm: expose the SAN LUN inventory
      api: add node-level iSCSI status

Thomas Lamprecht (16):
      multipath: add a library around multipathd
      multipath: add a cluster-wide configuration
      iscsi: add an option to manage storage LUNs with multipath
      lvm: activate a missing base volume before using the volume group
      multipath: apply the configuration on every node
      multipath: publish per-node status
      api: add endpoints for the cluster-wide multipath configuration
      api: multipath: add the cluster-wide health status
      diskmanage: look up the requested disks by name
      diskmanage: read the udev data of all disks with one call
      api: scan: add a SAN LUN inventory
      disks: lvm: drop unused imports
      disks: lvm: allow volume groups on SAN LUNs and multipath maps
      disks: lvm: refuse to destroy the volume group of a shared storage
      disks: allow wiping a SAN LUN that no storage uses
      api: scan: report the process that has a SAN LUN open

 debian/control                                |   3 +-
 src/PVE/API2/Disks.pm                         |  46 +-
 src/PVE/API2/Disks/LVM.pm                     |  77 ++-
 src/PVE/API2/ISCSI.pm                         | 166 ++++++
 src/PVE/API2/Makefile                         |   2 +
 src/PVE/API2/Multipath.pm                     | 451 +++++++++++++++
 src/PVE/API2/Storage/Scan.pm                  | 216 ++++++++
 src/PVE/CLI/pvesm.pm                          |  14 +
 src/PVE/Diskmanage.pm                         | 375 +++++++++++--
 src/PVE/ISCSI/Topology.pm                     |  88 +++
 src/PVE/Makefile                              |   6 +
 src/PVE/Multipath.pm                          | 213 ++++++++
 src/PVE/Multipath/Config.pm                   | 204 +++++++
 src/PVE/Multipath/Generator.pm                | 120 ++++
 src/PVE/Multipath/Identity.pm                 |  44 ++
 src/PVE/Multipath/Status.pm                   | 215 ++++++++
 src/PVE/Storage.pm                            |   2 +-
 src/PVE/Storage/ISCSIPlugin.pm                | 219 +++++---
 src/PVE/Storage/LVMPlugin.pm                  | 151 ++++-
 src/PVE/Storage/Makefile                      |   3 +-
 src/PVE/Storage/SAN.pm                        | 409 ++++++++++++++
 src/test/Makefile                             |  37 +-
 src/test/disk_api_test.pm                     | 314 +++++++++++
 src/test/disk_tests/iscsi/disklist            |   1 +
 .../disk_tests/iscsi/disklist_expected.json   |  19 +
 src/test/disk_tests/iscsi/lsblk               |   5 +
 src/test/disk_tests/iscsi/sda/device/model    |   1 +
 src/test/disk_tests/iscsi/sda/device/vendor   |   1 +
 .../disk_tests/iscsi/sda/queue/rotational     |   1 +
 src/test/disk_tests/iscsi/sda/size            |   1 +
 src/test/disk_tests/iscsi/sda_udevadm         |  21 +
 src/test/disk_tests/multipath/disklist        |  11 +
 .../multipath/disklist_expected.json          | 107 ++++
 src/test/disk_tests/multipath/dm-0/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-0/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-0/size       |   1 +
 src/test/disk_tests/multipath/dm-0_slaves     |   4 +
 src/test/disk_tests/multipath/dm-1/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-1/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-1/size       |   1 +
 src/test/disk_tests/multipath/dm-1_slaves     |   4 +
 src/test/disk_tests/multipath/dm-2/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-2/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-2/size       |   1 +
 src/test/disk_tests/multipath/dm-2_slaves     |   0
 src/test/disk_tests/multipath/dm-3/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-3/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-3/size       |   1 +
 src/test/disk_tests/multipath/dm-3_slaves     |   0
 src/test/disk_tests/multipath/dm-4/dm/name    |   1 +
 src/test/disk_tests/multipath/dm-4/dm/uuid    |   1 +
 src/test/disk_tests/multipath/dm-4/size       |   1 +
 src/test/disk_tests/multipath/dm-4_slaves     |   0
 src/test/disk_tests/multipath/lsblk           |  77 +++
 src/test/disk_tests/multipath/lvs             |   0
 src/test/disk_tests/multipath/mounts          |   1 +
 .../multipath/multipath_expected.json         |  59 ++
 src/test/disk_tests/multipath/multipathd      | 124 +++++
 .../multipath/multipathd_status_expected.json |  40 ++
 .../nvme-subsystem/nvme-subsys0/nvme3/address |   1 +
 .../nvme-subsys0/nvme3/nvme2c3n1/ana_state    |   1 +
 .../nvme-subsystem/nvme-subsys0/nvme3/state   |   1 +
 .../nvme-subsystem/nvme-subsys0/nvme4/address |   1 +
 .../nvme-subsys0/nvme4/nvme2c4n1/ana_state    |   1 +
 .../nvme-subsystem/nvme-subsys0/nvme4/state   |   1 +
 .../nvme-subsystem/nvme-subsys1/nvme0/address |   1 +
 .../nvme-subsystem/nvme-subsys1/nvme0/state   |   1 +
 .../disk_tests/multipath/nvme8n1/device/model |   1 +
 .../multipath/nvme8n1/device/transport        |   1 +
 .../multipath/nvme8n1/queue/rotational        |   1 +
 src/test/disk_tests/multipath/nvme8n1/size    |   1 +
 src/test/disk_tests/multipath/nvme8n1_udevadm |  14 +
 .../disk_tests/multipath/nvme9n1/device/model |   1 +
 .../multipath/nvme9n1/device/transport        |   1 +
 .../multipath/nvme9n1/device/vendor           |   1 +
 .../multipath/nvme9n1/queue/rotational        |   1 +
 src/test/disk_tests/multipath/nvme9n1/size    |   1 +
 src/test/disk_tests/multipath/nvme9n1_udevadm |  12 +
 .../multipath/nvme_path_status_expected.json  |  19 +
 src/test/disk_tests/multipath/partlist        |   0
 src/test/disk_tests/multipath/pvs             |   1 +
 .../disk_tests/multipath/sda/device/model     |   1 +
 .../disk_tests/multipath/sda/device/vendor    |   1 +
 .../disk_tests/multipath/sda/holders/holder   |   1 +
 .../disk_tests/multipath/sda/queue/rotational |   1 +
 src/test/disk_tests/multipath/sda/size        |   1 +
 src/test/disk_tests/multipath/sda_udevadm     |  18 +
 .../disk_tests/multipath/sdb/device/model     |   1 +
 .../disk_tests/multipath/sdb/device/vendor    |   1 +
 .../disk_tests/multipath/sdb/holders/holder   |   1 +
 .../disk_tests/multipath/sdb/queue/rotational |   1 +
 src/test/disk_tests/multipath/sdb/size        |   1 +
 src/test/disk_tests/multipath/sdb_udevadm     |  18 +
 .../disk_tests/multipath/sdc/device/model     |   1 +
 .../disk_tests/multipath/sdc/device/vendor    |   1 +
 .../disk_tests/multipath/sdc/holders/holder   |   1 +
 .../disk_tests/multipath/sdc/queue/rotational |   1 +
 src/test/disk_tests/multipath/sdc/size        |   1 +
 src/test/disk_tests/multipath/sdc_udevadm     |  18 +
 .../disk_tests/multipath/sdd/device/model     |   1 +
 .../disk_tests/multipath/sdd/device/vendor    |   1 +
 .../disk_tests/multipath/sdd/holders/holder   |   1 +
 .../disk_tests/multipath/sdd/queue/rotational |   1 +
 src/test/disk_tests/multipath/sdd/size        |   1 +
 src/test/disk_tests/multipath/sdd_udevadm     |  18 +
 src/test/disk_tests/multipath/zpool           |   1 +
 .../disk_tests/sas/disklist_expected.json     |   1 +
 src/test/disk_tests/sas/lsblk                 |   5 +
 src/test/disklist_test.pm                     | 175 +++++-
 src/test/multipath-three-states.json          |  52 ++
 src/test/plugin_properties_test.pm            |   1 +
 src/test/run_disk_api_tests.pl                |  11 +
 src/test/run_iscsi_activation_tests.pl        | 109 ++++
 src/test/run_lun_identity_tests.pl            |  57 ++
 src/test/run_multipath_api_tests.pl           | 515 ++++++++++++++++++
 src/test/run_multipath_tests.pl               | 169 ++++++
 src/test/run_san_api_tests.pl                 |  94 ++++
 src/test/run_san_library_tests.pl             | 135 +++++
 src/test/run_san_lun_scan_tests.pl            | 252 +++++++++
 src/test/run_san_nvme_tests.pl                | 120 ++++
 src/test/run_san_taint_tests.pl               |  60 ++
 src/test/run_san_wipe_tests.pl                | 255 +++++++++
 src/test/run_san_write_check_tests.pl         | 205 +++++++
 src/test/run_test_lvm_base_activation.pl      | 121 ++++
 src/test/run_test_lvm_base_volume.pl          |  12 +-
 src/test/run_test_lvm_create.pl               |  46 ++
 126 files changed, 6224 insertions(+), 194 deletions(-)

pve-docs:

Thomas Lamprecht (2):
      storage: document the cluster-wide multipath management
      storage: multipath: describe the use shown for an open LUN

 pmxcfs.adoc                  |   2 +
 pve-storage-iscsi.adoc       |  11 ++
 pve-storage-iscsidirect.adoc |   2 +-
 pve-storage-lvm.adoc         |   3 +
 pve-storage-multipath.adoc   | 309 +++++++++++++++++++++++++++++++++++
 pvesm.adoc                   |  18 +-
 6 files changed, 339 insertions(+), 6 deletions(-)

pve-manager:

Dietmar Maurer (2):
      api: nodes: expose the iSCSI status
      ui: node: san: show iSCSI targets and sessions

Thomas Lamprecht (13):
      pvestatd: apply the multipath configuration and report the node status
      report: add the managed multipath configuration
      api: cluster: add the multipath endpoints
      ui: dc: add a SAN view
      ui: storage: iscsi: add the multipath option
      ui: lvm: enable shared when a base storage is selected
      ui: node: add SAN LUNs panel
      ui: node: san: wipe a LUN that no storage uses
      ui: dc: san: add a guided setup for shared LVM on iSCSI
      ui: dc: san: add a guided setup for shared LVM on Fibre Channel
      ui: storage: point the iSCSI and LVM add dialogs to the SAN view
      ui: san: show the guest or process that has a LUN open
      ui: node: san: add a column for the iSCSI target of a LUN

 PVE/API2/Cluster.pm                           |   7 +
 PVE/API2/Nodes.pm                             |   7 +
 PVE/Report.pm                                 |   3 +
 PVE/Service/pvestatd.pm                       |   7 +
 www/manager6/Makefile                         |  12 +
 www/manager6/SANUtils.js                      | 202 ++++++++++
 www/manager6/Utils.js                         |  19 +
 www/manager6/dc/Config.js                     |  23 +-
 www/manager6/dc/MultipathWwidEdit.js          |  81 ++++
 www/manager6/dc/SAN.js                        | 374 ++++++++++++++++++
 www/manager6/node/Config.js                   |  24 ++
 www/manager6/node/ISCSITargets.js             | 150 +++++++
 www/manager6/node/LVM.js                      |   3 +
 www/manager6/node/SANLuns.js                  | 229 +++++++++++
 www/manager6/storage/Base.js                  |   5 +
 www/manager6/storage/IScsiEdit.js             |  46 +++
 www/manager6/storage/LVMEdit.js               |   6 +
 www/manager6/storage/wizard/FibreChannel.js   | 175 ++++++++
 www/manager6/storage/wizard/IScsi.js          | 274 +++++++++++++
 www/manager6/storage/wizard/LunSelect.js      | 177 +++++++++
 www/manager6/storage/wizard/NodeIdentities.js |  83 ++++
 www/manager6/storage/wizard/Wizard.js         | 299 ++++++++++++++
 www/manager6/window/SANLunState.js            | 115 ++++++
 www/manager6/window/SANLunWipe.js             |  52 +++
 24 files changed, 2367 insertions(+), 6 deletions(-)




             reply	other threads:[~2026-11-18  6:55 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18  6:52 Thomas Lamprecht [this message]
2026-11-18  6:52 ` [PATCH v6 cluster 01/42] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 02/42] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 03/42] diskmanage: qualify NVMe over fabrics transport Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 04/42] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 05/42] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 06/42] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 07/42] multipath: add a library around multipathd Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 08/42] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 09/42] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 10/42] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 11/42] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 12/42] multipath: apply the configuration on every node Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 13/42] multipath: publish per-node status Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 14/42] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 15/42] api: multipath: add the cluster-wide health status Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 16/42] diskmanage: look up the requested disks by name Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 17/42] diskmanage: read the udev data of all disks with one call Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 18/42] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 19/42] pvesm: expose the " Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 20/42] api: add node-level iSCSI status Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 21/42] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 22/42] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 23/42] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 24/42] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 storage 25/42] api: scan: report the process that has a SAN LUN open Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 docs 26/42] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 docs 27/42] storage: multipath: describe the use shown for an open LUN Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 28/42] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 29/42] report: add the managed multipath configuration Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 30/42] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 31/42] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 32/42] ui: dc: add a SAN view Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 33/42] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 34/42] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 35/42] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 36/42] ui: node: san: wipe a LUN that no storage uses Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 37/42] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 38/42] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 39/42] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 40/42] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 41/42] ui: san: show the guest or process that has a LUN open Thomas Lamprecht
2026-11-18  6:52 ` [PATCH v6 manager 42/42] ui: node: san: add a column for the iSCSI target of a LUN Thomas Lamprecht
2026-11-18 20:28 ` superseded: [PATCH v6 cluster,storage,docs,manager 00/42] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118065302.3033937-1-t.lamprecht@proxmox.com \
    --to=t.lamprecht@proxmox.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal