From: "Michael Köppl" <m.koeppl@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH container v9 05/10] allow pending mount point changes if storage is gone
Date: Mon, 29 Jun 2026 16:04:34 +0200 [thread overview]
Message-ID: <20260629140439.184878-6-m.koeppl@proxmox.com> (raw)
In-Reply-To: <20260629140439.184878-1-m.koeppl@proxmox.com>
Previously, applying a pending removal of an unused volume whose
backing storage was already removed would fail with "unable to apply
pending change unusedN", leaving a dangling reference that could never
be cleaned up.
Guard the volume deletion in vmconfig_apply_pending and
vmconfig_hotplug_pending with a check to ensure that the storage
exists. If the storage is gone, drop the entry with a warning instead of
trying to free a volume that no longer exists.
Apply the same check when a detached mount point is turned into an
'unusedN' entry, so a volume on a removed storage is not re-added as a
dangling unused entry, matching VM behavior.
Signed-off-by: Michael Köppl <m.koeppl@proxmox.com>
---
src/PVE/LXC/Config.pm | 43 ++++++++++++++++++++++++++++++++++---------
1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/src/PVE/LXC/Config.pm b/src/PVE/LXC/Config.pm
index c8098538..a3dd3a1a 100644
--- a/src/PVE/LXC/Config.pm
+++ b/src/PVE/LXC/Config.pm
@@ -1663,8 +1663,14 @@ sub vmconfig_hotplug_pending {
# pass
} elsif ($opt =~ m/^unused(\d+)$/) {
my $volid = $class->parse_volume($opt, $conf->{$opt})->{volume};
- PVE::LXC::delete_mountpoint_volume($storecfg, $vmid, $volid)
- if !$class->is_volume_in_use($conf, $volid, 1, 1);
+ my ($storeid) = PVE::Storage::parse_volume_id($volid);
+ if (PVE::Storage::storage_config($storecfg, $storeid, 1)) {
+ PVE::LXC::delete_mountpoint_volume($storecfg, $vmid, $volid)
+ if !$class->is_volume_in_use($conf, $volid, 1, 1);
+ } else {
+ PVE::RESTEnvironment::log_warn(
+ "storage '$storeid' no longer exists, unused volume '$volid' will be removed");
+ }
} elsif ($opt eq 'swap') {
$hotplug_memory->(undef, 0);
} elsif ($opt eq 'cpulimit') {
@@ -1765,14 +1771,27 @@ sub vmconfig_apply_pending {
if ($opt =~ m/^mp(\d+)$/) {
my $mp = $class->parse_volume($opt, $conf->{$opt});
if ($mp->{type} eq 'volume') {
- # FIXME: use $mp->{volume} for is_volume_in_use, fix conditions for check
- $class->add_unused_volume($conf, $mp->{volume})
- if !$class->is_volume_in_use($conf, $conf->{$opt}, 1, 1);
+ my ($storeid, undef) = PVE::Storage::parse_volume_id($mp->{volume});
+ if (PVE::Storage::storage_config($storecfg, $storeid, 1)) {
+ # FIXME: use $mp->{volume} for is_volume_in_use, fix conditions for check
+ $class->add_unused_volume($conf, $mp->{volume})
+ if !$class->is_volume_in_use($conf, $conf->{$opt}, 1, 1);
+ } else {
+ PVE::RESTEnvironment::log_warn(
+ "storage '$storeid' no longer exists, volume '$mp->{volume}' will be removed"
+ );
+ }
}
} elsif ($opt =~ m/^unused(\d+)$/) {
my $volid = $class->parse_volume($opt, $conf->{$opt})->{volume};
- PVE::LXC::delete_mountpoint_volume($storecfg, $vmid, $volid)
- if !$class->is_volume_in_use($conf, $volid, 1, 1);
+ my ($storeid) = PVE::Storage::parse_volume_id($volid);
+ if (PVE::Storage::storage_config($storecfg, $storeid, 1)) {
+ PVE::LXC::delete_mountpoint_volume($storecfg, $vmid, $volid)
+ if !$class->is_volume_in_use($conf, $volid, 1, 1);
+ } else {
+ PVE::RESTEnvironment::log_warn(
+ "storage '$storeid' no longer exists, unused volume '$volid' will be removed");
+ }
} elsif ($opt =~ m/^net(\d+)$/) {
if ($have_sdn) {
my $net = $class->parse_lxc_network($conf->{$opt});
@@ -1891,8 +1910,14 @@ sub apply_pending_mountpoint {
if (defined($old)) {
my $mp = $class->parse_volume($opt, $old);
if ($mp->{type} eq 'volume') {
- $class->add_unused_volume($conf, $mp->{volume})
- if !$class->is_volume_in_use($conf, $conf->{$opt}, 1, 1);
+ my ($storeid) = PVE::Storage::parse_volume_id($mp->{volume});
+ if (PVE::Storage::storage_config($storecfg, $storeid, 1)) {
+ $class->add_unused_volume($conf, $mp->{volume})
+ if !$class->is_volume_in_use($conf, $conf->{$opt}, 1, 1);
+ } else {
+ PVE::RESTEnvironment::log_warn(
+ "storage '$storeid' no longer exists, volume '$mp->{volume}' will be removed");
+ }
}
}
}
--
2.47.3
next prev parent reply other threads:[~2026-06-29 14:06 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-29 14:04 [PATCH container/qemu-server/storage v9 00/10] fix #3711 and adapt drive detach/remove behavior Michael Köppl
2026-06-29 14:04 ` [PATCH storage v9 01/10] fix #3711: vdisk_free: print warning if storage does not exist Michael Köppl
2026-06-30 14:21 ` Fiona Ebner
2026-07-01 10:01 ` Michael Köppl
2026-06-29 14:04 ` [PATCH container v9 02/10] fix #3711: warn about storage errors during mountpoint delete Michael Köppl
2026-06-29 14:04 ` [PATCH container v9 03/10] destroy_lxc, delete_mp_volume: rename $volume to $volid Michael Köppl
2026-06-29 14:04 ` [PATCH container v9 04/10] config: ensure valid volid through parse_volume() Michael Köppl
2026-06-29 14:04 ` Michael Köppl [this message]
2026-06-30 13:41 ` [PATCH container v9 05/10] allow pending mount point changes if storage is gone Fiona Ebner
2026-07-01 12:15 ` Michael Köppl
2026-07-01 12:22 ` Fiona Ebner
2026-06-29 14:04 ` [PATCH container v9 06/10] add linked clone check when destroying container template Michael Köppl
2026-06-30 13:57 ` Fiona Ebner
2026-06-29 14:04 ` [PATCH qemu-server v9 07/10] adapt linked clone check to not die if an error occurs during check Michael Köppl
2026-06-30 14:04 ` Fiona Ebner
2026-06-29 14:04 ` [PATCH qemu-server v9 08/10] fix #3711: make removal of VM possible if store does not exist anymore Michael Köppl
2026-06-29 14:04 ` [PATCH qemu-server v9 09/10] destroy_vm: use log_warn for vdisk_free errors for consistency Michael Köppl
2026-06-29 14:04 ` [PATCH qemu-server v9 10/10] display warnings for storage errors or if storage no longer exists Michael Köppl
2026-06-30 14:23 ` [PATCH container/qemu-server/storage v9 00/10] fix #3711 and adapt drive detach/remove behavior Fiona Ebner
2026-07-01 14:14 ` superseded: " Michael Köppl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260629140439.184878-6-m.koeppl@proxmox.com \
--to=m.koeppl@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox