From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v5 manager 25/36] report: add the managed multipath configuration
Date: Mon, 16 Nov 2026 02:23:34 +0100 [thread overview]
Message-ID: <20261116012355.3187417-26-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261116012355.3187417-1-t.lamprecht@proxmox.com>
The report shows /etc/multipath.conf, the WWID allow-list and the map
topology, but not the configuration that Proxmox VE manages: the LUN
entries and the overrides file kept cluster-wide in /etc/pve, and the
drop-ins pvestatd generates from them under /etc/multipath/conf.d.
Include them, so a report shows what Proxmox VE configured on the
node. As before, only nodes with multipath-tools installed report
this.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
PVE/Report.pm | 3 +++
1 file changed, 3 insertions(+)
diff --git a/PVE/Report.pm b/PVE/Report.pm
index e255d538f..76d644847 100644
--- a/PVE/Report.pm
+++ b/PVE/Report.pm
@@ -183,7 +183,10 @@ my $init_report_cmds = sub {
if (cmd_exists('multipath')) {
push @{ $report_def->{disks}->{cmds} },
+ 'cat /etc/pve/multipath.cfg',
+ 'cat /etc/pve/multipath-overrides.conf',
'cat /etc/multipath.conf',
+ sub { dir2text('/etc/multipath/conf.d/', 'pve-.+\.conf') },
'cat /etc/multipath/wwids',
'multipath -ll',
;
next prev parent reply other threads:[~2026-11-16 1:27 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 1:23 [PATCH v5 cluster,storage,docs,manager 00/36] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 cluster 01/36] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 02/36] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 03/36] diskmanage: qualify NVMe over fabrics transport Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 04/36] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 05/36] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 06/36] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 07/36] multipath: add a library around multipathd Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 08/36] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 09/36] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 10/36] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 11/36] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 12/36] multipath: apply the configuration on every node Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 13/36] multipath: publish per-node status Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 14/36] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 15/36] api: multipath: add the cluster-wide health status Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 16/36] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 17/36] pvesm: expose the " Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 18/36] api: add node-level iSCSI status Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 19/36] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 20/36] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 21/36] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 storage 22/36] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 docs 23/36] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 24/36] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-16 1:23 ` Thomas Lamprecht [this message]
2026-11-16 1:23 ` [PATCH v5 manager 26/36] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 27/36] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 28/36] ui: dc: add a SAN view Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 29/36] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 30/36] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 31/36] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 32/36] ui: node: san: wipe a LUN that no storage uses Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 33/36] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 34/36] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 35/36] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-16 1:23 ` [PATCH v5 manager 36/36] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-18 8:11 ` superseded: [PATCH v5 cluster,storage,docs,manager 00/36] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116012355.3187417-26-t.lamprecht@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox