From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH qemu-server 17/34] api: status: return the guest uid
Date: Mon, 16 Nov 2026 01:46:29 +0100 [thread overview]
Message-ID: <20261116004703.2908294-18-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261116004703.2908294-1-t.lamprecht@proxmox.com>
Tools that follow a guest across restores and migrations need its uid.
It is part of the config already, but the status of a single VM is the
more common entry point for them, so return it there as well.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
src/PVE/API2/Qemu.pm | 5 +++++
src/test/run_api_tests.pl | 25 +++++++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/src/PVE/API2/Qemu.pm b/src/PVE/API2/Qemu.pm
index 0ac5e14a..5e1f70a1 100644
--- a/src/PVE/API2/Qemu.pm
+++ b/src/PVE/API2/Qemu.pm
@@ -3555,6 +3555,7 @@ __PACKAGE__->register_method({
enum => ['vnc'],
optional => 1,
},
+ uid => PVE::GuestIdentity::meta_format_properties()->{uid},
},
},
code => sub {
@@ -3577,6 +3578,10 @@ __PACKAGE__->register_method({
}
$status->{agent} = 1 if PVE::QemuServer::Agent::get_qga_key($conf, 'enabled');
+ if (my $identity = PVE::QemuConfig->get_identity($conf)) {
+ $status->{uid} = $identity->{uid};
+ }
+
return $status;
},
});
diff --git a/src/test/run_api_tests.pl b/src/test/run_api_tests.pl
index 334980f0..4a4c10bf 100755
--- a/src/test/run_api_tests.pl
+++ b/src/test/run_api_tests.pl
@@ -277,4 +277,29 @@ subtest 'migration preconditions' => sub {
mock_unreachable_config();
};
+subtest 'status' => sub {
+ my $vm_conf;
+ $qemu_config_module->mock(load_config => sub { return $vm_conf; });
+ $qemu_server_module->mock(
+ vmstatus => sub { return { 100 => { vmid => 100, status => 'stopped' } }; });
+ my $ha_config_module = Test::MockModule->new('PVE::HA::Config');
+ $ha_config_module->mock(get_service_status => sub { return { managed => 0 }; });
+
+ my $returns = PVE::API2::Qemu->map_method_by_name('vm_status')->{returns};
+
+ $vm_conf =
+ { meta => 'creation-qemu=10.1.2,ctime=1,rtime=1700000000000,uid=abcdefghijklmnopqrst' };
+ my $status = PVE::API2::Qemu->vm_status({ node => 'localhost', vmid => 100 });
+ is($status->{uid}, 'abcdefghijklmnopqrst', 'uid returned');
+ eval { PVE::JSONSchema::validate($status, $returns) };
+ is($@, '', 'result matches the schema');
+
+ $vm_conf = { meta => 'creation-qemu=10.1.2,ctime=1' };
+ $status = PVE::API2::Qemu->vm_status({ node => 'localhost', vmid => 100 });
+ ok(!exists($status->{uid}), 'no uid for config without identity');
+
+ mock_unreachable_config();
+ $qemu_server_module->unmock('vmstatus');
+};
+
done_testing();
--
2.47.3
next prev parent reply other threads:[~2026-11-16 0:48 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 0:46 [PATCH cluster/guest-common/qemu-server/container/manager/docs 00/34] fix #7846: guest identity (uid) and cluster ID Thomas Lamprecht
2026-11-16 0:46 ` [PATCH cluster 01/34] pmxcfs: reject changes to the cluster ID file from user space Thomas Lamprecht
2026-11-16 0:46 ` [PATCH cluster 02/34] pmxcfs: generate a cluster ID on standalone nodes Thomas Lamprecht
2026-11-16 0:46 ` [PATCH cluster 03/34] pmxcfs: dfsm: add a callback that runs once all members are in sync Thomas Lamprecht
2026-11-16 0:46 ` [PATCH cluster 04/34] pmxcfs: quorum: pass the corosync membership to an optional listener Thomas Lamprecht
2026-11-16 0:46 ` [PATCH cluster 05/34] pmxcfs: dcdb: generate the cluster ID once the cluster is in sync Thomas Lamprecht
2026-11-16 0:46 ` [PATCH cluster 06/34] cluster: add helper to read the cluster ID Thomas Lamprecht
2026-11-16 0:46 ` [PATCH cluster 07/34] pmxcfs: allow removing the cluster ID file in forced local mode Thomas Lamprecht
2026-11-16 0:46 ` [PATCH guest-common 08/34] guest identity: add helpers for the guest uid and registration time Thomas Lamprecht
2026-11-17 10:47 ` Dominik Csapak
2026-11-16 0:46 ` [PATCH guest-common 09/34] abstract config: assign a guest identity and keep it on config writes Thomas Lamprecht
2026-11-17 10:47 ` Dominik Csapak
2026-11-17 12:47 ` Dominik Csapak
2026-11-16 0:46 ` [PATCH guest-common 10/34] abstract config: let the VMID reservation return the previous state Thomas Lamprecht
2026-11-16 0:46 ` [PATCH guest-common 11/34] guest identity: allow taking over a uid that is unused in the cluster Thomas Lamprecht
2026-11-17 13:14 ` Dominik Csapak
2026-11-16 0:46 ` [PATCH qemu-server 12/34] api: restore: release the VMID if a restore to an unused VMID fails Thomas Lamprecht
2026-11-16 0:46 ` [PATCH qemu-server 13/34] api: migrate, clone: refuse targets that would drop the guest identity Thomas Lamprecht
2026-11-16 0:46 ` [PATCH qemu-server 14/34] fix #7846: config: add a guest identity to the 'meta' property Thomas Lamprecht
2026-11-16 0:46 ` [PATCH qemu-server 15/34] restore: take over the guest uid from the backup where possible Thomas Lamprecht
2026-11-17 15:17 ` Dominik Csapak
2026-11-16 0:46 ` [PATCH qemu-server 16/34] api: remote migration: take over the guest uid from the source Thomas Lamprecht
2026-11-17 15:26 ` Dominik Csapak
2026-11-16 0:46 ` Thomas Lamprecht [this message]
2026-11-16 0:46 ` [PATCH container 18/34] config: add read-only meta property with the creation time Thomas Lamprecht
2026-11-16 0:46 ` [PATCH container 19/34] fix #7846: config: add a guest identity to the 'meta' property Thomas Lamprecht
2026-11-16 0:46 ` [PATCH container 20/34] api: migrate, clone: refuse targets that would drop the guest identity Thomas Lamprecht
2026-11-16 0:46 ` [PATCH container 21/34] restore: take over the guest uid from the backup where possible Thomas Lamprecht
2026-11-16 0:46 ` [PATCH container 22/34] restore: refuse overwriting a container with another guest's backup Thomas Lamprecht
2026-11-16 0:46 ` [PATCH container 23/34] migrate: remote: clean up the target on a tunnel version mismatch Thomas Lamprecht
2026-11-16 0:46 ` [PATCH container 24/34] api: remote migration: take over the guest uid from the source Thomas Lamprecht
2026-11-16 0:46 ` [PATCH container 25/34] api: status: return the guest uid Thomas Lamprecht
2026-11-16 0:46 ` [PATCH manager 26/34] api: cluster resources: add guest uid and registration time Thomas Lamprecht
2026-11-17 15:30 ` Dominik Csapak
2026-11-16 0:46 ` [PATCH manager 27/34] api: cluster status: add cluster ID Thomas Lamprecht
2026-11-16 0:46 ` [PATCH manager 28/34] ui: restore: allow overwriting a guest with a backup of another guest Thomas Lamprecht
2026-11-16 0:46 ` [PATCH manager 29/34] ui: migrate: refuse target nodes that would drop the guest identity Thomas Lamprecht
2026-11-16 0:46 ` [PATCH manager 30/34] ui: guest summary: show " Thomas Lamprecht
2026-11-17 15:44 ` Dominik Csapak
2026-11-16 0:46 ` [PATCH docs 31/34] vzdump: describe the guest identity of VMs and containers Thomas Lamprecht
2026-11-16 0:46 ` [PATCH docs 32/34] pvecm: document the cluster ID and how to get a new one Thomas Lamprecht
2026-11-16 0:46 ` [PATCH docs 33/34] qm: configuration: describe the read-only meta property Thomas Lamprecht
2026-11-16 0:46 ` [PATCH docs 34/34] pct: " Thomas Lamprecht
2026-11-17 10:47 ` [PATCH cluster/guest-common/qemu-server/container/manager/docs 00/34] fix #7846: guest identity (uid) and cluster ID Dominik Csapak
2026-11-17 11:29 ` Thomas Lamprecht
2026-11-17 11:55 ` Dominik Csapak
2026-11-17 12:47 ` Thomas Lamprecht
2026-11-17 13:54 ` Dominik Csapak
2026-11-17 15:55 ` Dominik Csapak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116004703.2908294-18-t.lamprecht@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox