From: Gabriel Goller <g.goller@proxmox.com>
To: Stefan Hanreich <s.hanreich@proxmox.com>
Cc: pve-devel@lists.proxmox.com
Subject: Re: [PATCH pve-network v3 15/32] sdn: add optional VRFs for simple zones
Date: Thu, 19 Nov 2026 14:44:46 +0100 [thread overview]
Message-ID: <av79K_idkELFtOz5@luna.proxmox.com> (raw)
In-Reply-To: <4fd4b511-43f7-4cde-80c6-dd387280517c@proxmox.com>
On 18.11.2026 17:18, Stefan Hanreich wrote:
>
>
> On 11/16/26 5:16 PM, Gabriel Goller wrote:
> > Allow simple zones to isolate routing with dedicated-vrf. It is
> > disabled by default to preserve existing behavior.
> >
> > Create the VRF even when the zone has no VNets, so fabrics can use it
> > without requiring a VNet.
> >
> > Add unreachable IPv4 and IPv6 default routes with the highest metric
> > to the VRF, as EVPN does on non-exit nodes. Otherwise lookups that find
> > no route in the VRF table fall through to the main table, e.g. if no
> > default route is configured or before FRR has installed it.
> >
> > Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
> > ---
> > src/PVE/API2/Network/SDN/Zones.pm | 6 ++++
> > src/PVE/Network/SDN/Zones.pm | 19 +++++++++--
> > src/PVE/Network/SDN/Zones/EvpnPlugin.pm | 5 +--
> > src/PVE/Network/SDN/Zones/Plugin.pm | 11 ++++++
> > src/PVE/Network/SDN/Zones/SimplePlugin.pm | 32 +++++++++++++++--
> > .../hetzner-vrf/expected_sdn_interfaces | 27 +++++++++++++++
> > src/test/zones/simple/hetzner-vrf/interfaces | 6 ++++
> > src/test/zones/simple/hetzner-vrf/sdn_config | 34 +++++++++++++++++++
> > .../simple/vrf-empty/expected_sdn_interfaces | 7 ++++
> > src/test/zones/simple/vrf-empty/interfaces | 2 ++
> > src/test/zones/simple/vrf-empty/sdn_config | 12 +++++++
> > .../zones/simple/vrf/expected_sdn_interfaces | 14 ++++++++
> > src/test/zones/simple/vrf/interfaces | 2 ++
> > src/test/zones/simple/vrf/sdn_config | 17 ++++++++++
> > 14 files changed, 187 insertions(+), 7 deletions(-)
> > create mode 100644 src/test/zones/simple/hetzner-vrf/expected_sdn_interfaces
> > create mode 100644 src/test/zones/simple/hetzner-vrf/interfaces
> > create mode 100644 src/test/zones/simple/hetzner-vrf/sdn_config
> > create mode 100644 src/test/zones/simple/vrf-empty/expected_sdn_interfaces
> > create mode 100644 src/test/zones/simple/vrf-empty/interfaces
> > create mode 100644 src/test/zones/simple/vrf-empty/sdn_config
> > create mode 100644 src/test/zones/simple/vrf/expected_sdn_interfaces
> > create mode 100644 src/test/zones/simple/vrf/interfaces
> > create mode 100644 src/test/zones/simple/vrf/sdn_config
> >
> > diff --git a/src/PVE/API2/Network/SDN/Zones.pm b/src/PVE/API2/Network/SDN/Zones.pm
> > index 74b10f032bf4..38d950fda076 100644
> > --- a/src/PVE/API2/Network/SDN/Zones.pm
> > +++ b/src/PVE/API2/Network/SDN/Zones.pm
> > @@ -61,6 +61,12 @@ my $ZONE_PROPERTIES = {
> > optional => 1,
> > description => 'Name of DHCP server backend for this zone.',
> > },
> > + 'dedicated-vrf' => {
> > + type => 'boolean',
> > + default => 0,
> > + optional => 1,
> > + description => 'Create a dedicated VRF for a simple zone.',
> > + },
> > 'rt-import' => {
> > type => 'string',
> > optional => 1,
> > diff --git a/src/PVE/Network/SDN/Zones.pm b/src/PVE/Network/SDN/Zones.pm
> > index c189652a79eb..cf81c002c4a5 100644
> > --- a/src/PVE/Network/SDN/Zones.pm
> > +++ b/src/PVE/Network/SDN/Zones.pm
> > @@ -124,6 +124,9 @@ sub generate_etc_network_config {
> > my $controller_cfg = $cfg->{controllers};
> > return if !$vnet_cfg && !$zone_cfg;
> >
> > + my $vnet_ids = $vnet_cfg ? ($vnet_cfg->{ids} // {}) : {};
> > + my $zone_ids = $zone_cfg ? ($zone_cfg->{ids} // {}) : {};
> > +
> > my $interfaces_config = PVE::INotify::read_file('interfaces');
> > my $bridge_ports = PVE::IPRoute2::get_bridge_port_mapping();
> >
> > @@ -131,8 +134,18 @@ sub generate_etc_network_config {
> > my $config = {};
> > my $nodename = PVE::INotify::nodename();
> >
> > - for my $id (sort keys %{ $vnet_cfg->{ids} }) {
> > - my $vnet = $vnet_cfg->{ids}->{$id};
> > + for my $zone_id (sort keys %$zone_ids) {
> > + my $plugin_config = $zone_ids->{$zone_id};
> > + next if $plugin_config->{type} ne 'simple';
> > + next if defined($plugin_config->{nodes}) && !$plugin_config->{nodes}->{$nodename};
> > +
> > + PVE::Network::SDN::Zones::SimplePlugin->generate_zone_config(
>
> fine for now, but shouldn't we make this a method of the ZonePlugin?
Already done in the "sdn: always generate EVPN zone VRFs" commit, but pulled it
back here.
> > + $plugin_config, $zone_id, $config,
> > + );
> > + }
> > +
> > + for my $id (sort keys %$vnet_ids) {
> > + my $vnet = $vnet_ids->{$id};
> > my $zone = $vnet->{zone};
> >
> > if (!$zone) {
> > @@ -140,7 +153,7 @@ sub generate_etc_network_config {
> > next;
> > }
> >
> > - my $plugin_config = $zone_cfg->{ids}->{$zone};
> > + my $plugin_config = $zone_ids->{$zone};
> >
> > if (!defined($plugin_config)) {
> > warn "can't generate vnet '$id': zone $zone don't exist\n";
> > [snip]
Thanks for the review
next prev parent reply other threads:[~2026-11-19 13:44 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 16:11 [PATCH common/manager/network/proxmox{-ve-rs,-perl-rs,-widget-toolkit} v3 00/32] SDN VRF support Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-common v3 01/32] interfaces: preserve VRF membership across address family changes Gabriel Goller
2026-11-18 14:13 ` Stefan Hanreich
2026-11-18 15:41 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 02/32] frr: add VRF-aware OSPF rendering Gabriel Goller
2026-11-18 14:41 ` Stefan Hanreich
2026-11-18 16:21 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 03/32] sdn: add zone references to OSPF and BGP fabrics Gabriel Goller
2026-11-18 14:10 ` Stefan Hanreich
2026-11-18 16:55 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 04/32] sdn: generate fabric routing configuration in zone VRFs Gabriel Goller
2026-11-18 14:53 ` Stefan Hanreich
2026-11-18 17:26 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 05/32] sdn: fix VRF route-map scoping and zone ID validation Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 06/32] tests: fabrics: add test for fabrics in VRFs Gabriel Goller
2026-11-18 15:01 ` Stefan Hanreich
2026-11-18 17:33 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 07/32] sdn: allow static routes in simple zone VRFs Gabriel Goller
2026-11-18 15:29 ` Stefan Hanreich
2026-11-18 18:10 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 08/32] sdn: support static routes in EVPN " Gabriel Goller
2026-11-18 15:32 ` Stefan Hanreich
2026-11-19 13:12 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 09/32] pve-rs: fabrics: assign network interfaces to configured VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 10/32] pve-rs: fabrics: make per-fabric status queries VRF-aware Gabriel Goller
2026-11-18 15:42 ` Stefan Hanreich
2026-11-19 13:30 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 11/32] pve-rs: fabrics: include VRF routes in aggregate status Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 12/32] pve-rs: fabrics: expose host interface membership Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 13/32] sdn: expose static routes for simple zone uplinks Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 14/32] sdn: evpn: add unreachable IPv6 default route to zone VRFs Gabriel Goller
2026-11-18 16:08 ` Stefan Hanreich
2026-11-18 16:39 ` Stefan Hanreich
2026-11-19 13:38 ` Gabriel Goller
2026-11-19 15:51 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 15/32] sdn: add optional VRFs for simple zones Gabriel Goller
2026-11-18 16:18 ` Stefan Hanreich
2026-11-19 13:44 ` Gabriel Goller [this message]
2026-11-16 16:11 ` [PATCH pve-network v3 16/32] sdn: allow fabrics to use simple zone VRFs Gabriel Goller
2026-11-18 16:27 ` Stefan Hanreich
2026-11-19 14:14 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 17/32] sdn: require underlay fabrics to use the default VRF Gabriel Goller
2026-11-18 16:30 ` Stefan Hanreich
2026-11-19 14:33 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 18/32] sdn: always generate EVPN zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 19/32] api: sdn: allow EVPN zones as fabric VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 20/32] api: sdn: disallow BGP fabrics in EVPN zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 21/32] sdn: simple: support static routes in zone routing tables Gabriel Goller
2026-11-18 16:49 ` Stefan Hanreich
2026-11-19 14:53 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 22/32] sdn: evpn: allow static routes Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 23/32] sdn: zones: SNAT via dedicated uplinks in zone VRFs Gabriel Goller
2026-11-18 18:07 ` Stefan Hanreich
2026-11-16 16:11 ` [PATCH pve-network v3 24/32] sdn: dhcp: only configure DHCP for zones on the local node Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 25/32] sdn: dhcp: run dnsmasq in the zone VRF Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-widget-toolkit v3 26/32] ui: network: allow selecting a VRF for host interfaces Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 27/32] ui: sdn: add VRF zone selection for fabrics Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 28/32] ui: sdn: expose EVPN zones as fabric VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 29/32] network: allow setting the VRF of host interfaces Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 30/32] ui: sdn: allow static routes for Simple zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 31/32] ui: sdn: allow static routes in EVPN zones Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 32/32] network: generate SDN DHCP config after ifreload Gabriel Goller
2026-11-18 18:27 ` [PATCH common/manager/network/proxmox{-ve-rs,-perl-rs,-widget-toolkit} v3 00/32] SDN VRF support Stefan Hanreich
2026-11-19 15:33 ` Gabriel Goller
2026-11-19 20:10 ` Gabriel Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av79K_idkELFtOz5@luna.proxmox.com \
--to=g.goller@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
--cc=s.hanreich@proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox