From: Stefan Hanreich <s.hanreich@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: Re: [PATCH proxmox-ve-rs v3 08/32] sdn: support static routes in EVPN zone VRFs
Date: Wed, 18 Nov 2026 16:32:41 +0100 [thread overview]
Message-ID: <393d6979-8a84-4f81-83e1-c2a08518cfa3@proxmox.com> (raw)
In-Reply-To: <20261116161154.343743-9-g.goller@proxmox.com>
what could be an interesting option: create static routes only on exit nodes
as that'd have the use-case of creating routes to uplinks on exit nodes only,
whereas all other nodes have the exit-nodes as default route.
On 11/16/26 5:12 PM, Gabriel Goller wrote:
> Allow EVPN zones to reach networks behind appliances or external routers
> using the same zone-wide static routes as simple zones. EVPN routes
> always belong to vrf_<zone>, without requiring the dedicated-vrf option
> used by simple zones.
>
> Generate routes on all nodes that belong to the zone, not just exit
> nodes. This does not enable redistribution of static routes, so adding
> a route does not by itself advertise it to other nodes.
>
> Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
> ---
> proxmox-ve-config/src/sdn/static_route.rs | 11 +++--
> proxmox-ve-config/tests/static_routes/main.rs | 40 ++++++++++++++++++-
> ...tatic_routes__evpn_zone_routes_to_frr.snap | 12 ++++++
> 3 files changed, 56 insertions(+), 7 deletions(-)
> create mode 100644 proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap
>
> diff --git a/proxmox-ve-config/src/sdn/static_route.rs b/proxmox-ve-config/src/sdn/static_route.rs
> index eab6300374ff..0a5e0b3939f4 100644
> --- a/proxmox-ve-config/src/sdn/static_route.rs
> +++ b/proxmox-ve-config/src/sdn/static_route.rs
> @@ -1,4 +1,4 @@
> -//! Static routes stored as repeatable property strings in simple SDN zones.
> +//! Static routes stored as repeatable property strings in Simple and EVPN SDN zones.
>
> use std::collections::BTreeMap;
> use std::net::IpAddr;
> @@ -22,7 +22,7 @@ use crate::sdn::fabric::section_config::interface::InterfaceName;
> )]
> #[derive(Clone, Debug, Serialize, Deserialize)]
> #[serde(rename_all = "kebab-case", deny_unknown_fields)]
> -/// A static route in a simple zone. The destination VRF is determined by the zone.
> +/// A static route in a Simple or EVPN zone. The destination VRF is determined by the zone.
> pub struct StaticRoute {
> /// Destination prefix, including 0.0.0.0/0 or ::/0 for a default route.
> pub prefix: Cidr,
> @@ -119,8 +119,8 @@ impl ZoneRoutesConfig {
> if config.route.is_empty() {
> continue;
> }
> - if config.ty != "simple" {
> - bail!("static routes are only supported in simple zones (zone '{zone}')");
> + if !matches!(config.ty.as_str(), "simple" | "evpn") {
> + bail!("static routes are only supported in Simple and EVPN zones (zone '{zone}')");
> }
> if config
> .nodes
> @@ -129,8 +129,7 @@ impl ZoneRoutesConfig {
> {
> continue;
> }
> - let destination_vrf = config
> - .dedicated_vrf
> + let destination_vrf = (config.ty == "evpn" || config.dedicated_vrf)
> .then(|| FrrInterfaceName::try_from(format!("vrf_{zone}")))
> .transpose()?;
> for route in &config.route {
> diff --git a/proxmox-ve-config/tests/static_routes/main.rs b/proxmox-ve-config/tests/static_routes/main.rs
> index a0daf38449ff..f198a3bf3353 100644
> --- a/proxmox-ve-config/tests/static_routes/main.rs
> +++ b/proxmox-ve-config/tests/static_routes/main.rs
> @@ -59,6 +59,44 @@ fn simple_zone_routes_to_frr() -> Result<(), Error> {
> Ok(())
> }
>
> +#[test]
> +fn evpn_zone_routes_to_frr() -> Result<(), Error> {
> + let zones: ZoneRoutesConfig = serde_json::from_value(json!({"ids": {
> + "blue": {
> + "type": "evpn",
> + "nodes": {"pve1": 1, "pve2": 1},
> + "exitnodes": {"pve1": 1},
> + "route": [
> + "prefix=0.0.0.0/0,via=10.10.0.2",
> + "prefix=172.20.0.0/16,via=192.0.2.1,distance=200,nexthop-vrf=default",
> + "prefix=::/0,via=fe80::1,iface=vnetblue",
> + "prefix=198.51.100.0/24,iface=uplink0"
> + ]
> + },
> + "disabled": {
> + "type": "evpn",
> + "nodes": {},
> + "route": ["prefix=192.0.2.0/24,iface=unused0"]
> + }
> + }}))?;
> + let config = FrrConfig {
> + ip_routes: zones.routes_for_node("pve1")?,
> + ..Default::default()
> + };
> + // EVPN always uses the zone VRF, without requiring the Simple-only dedicated-vrf flag.
> + let output = dump(&config)?;
> + insta::assert_snapshot!(output);
> +
> + // Routes apply to every zone node, not just exit nodes. FRR resolves local interfaces.
> + let other = FrrConfig {
> + ip_routes: zones.routes_for_node("pve2")?,
> + ..Default::default()
> + };
> + assert_eq!(dump(&other)?, output);
> + assert!(zones.routes_for_node("pve3")?.is_empty());
> + Ok(())
> +}
> +
> #[test]
> fn validate_route_properties() {
> for value in [
> @@ -109,7 +147,7 @@ fn validate_route_properties() {
>
> #[test]
> fn reject_routes_in_other_zone_types() -> Result<(), Error> {
> - for ty in ["vlan", "qinq", "vxlan", "evpn", "faucet"] {
> + for ty in ["vlan", "qinq", "vxlan", "faucet"] {
> let zones: ZoneRoutesConfig = serde_json::from_value(json!({"ids": {
> "zone1": {"type": ty, "route": ["prefix=0.0.0.0/0,via=192.0.2.1"]}
> }}))?;
> diff --git a/proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap b/proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap
> new file mode 100644
> index 000000000000..0301559a6d77
> --- /dev/null
> +++ b/proxmox-ve-config/tests/static_routes/snapshots/static_routes__evpn_zone_routes_to_frr.snap
> @@ -0,0 +1,12 @@
> +---
> +source: proxmox-ve-config/tests/static_routes/main.rs
> +expression: output
> +---
> +!
> +ip route 0.0.0.0/0 10.10.0.2 vrf vrf_blue
> +!
> +ip route 172.20.0.0/16 192.0.2.1 200 nexthop-vrf default vrf vrf_blue
> +!
> +ipv6 route ::/0 fe80::1 vnetblue vrf vrf_blue
> +!
> +ip route 198.51.100.0/24 uplink0 vrf vrf_blue
next prev parent reply other threads:[~2026-11-18 15:32 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 16:11 [PATCH common/manager/network/proxmox{-ve-rs,-perl-rs,-widget-toolkit} v3 00/32] SDN VRF support Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-common v3 01/32] interfaces: preserve VRF membership across address family changes Gabriel Goller
2026-11-18 14:13 ` Stefan Hanreich
2026-11-18 15:41 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 02/32] frr: add VRF-aware OSPF rendering Gabriel Goller
2026-11-18 14:41 ` Stefan Hanreich
2026-11-18 16:21 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 03/32] sdn: add zone references to OSPF and BGP fabrics Gabriel Goller
2026-11-18 14:10 ` Stefan Hanreich
2026-11-18 16:55 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 04/32] sdn: generate fabric routing configuration in zone VRFs Gabriel Goller
2026-11-18 14:53 ` Stefan Hanreich
2026-11-18 17:26 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 05/32] sdn: fix VRF route-map scoping and zone ID validation Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 06/32] tests: fabrics: add test for fabrics in VRFs Gabriel Goller
2026-11-18 15:01 ` Stefan Hanreich
2026-11-18 17:33 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 07/32] sdn: allow static routes in simple zone VRFs Gabriel Goller
2026-11-18 15:29 ` Stefan Hanreich
2026-11-18 18:10 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-ve-rs v3 08/32] sdn: support static routes in EVPN " Gabriel Goller
2026-11-18 15:32 ` Stefan Hanreich [this message]
2026-11-19 13:12 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 09/32] pve-rs: fabrics: assign network interfaces to configured VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 10/32] pve-rs: fabrics: make per-fabric status queries VRF-aware Gabriel Goller
2026-11-18 15:42 ` Stefan Hanreich
2026-11-19 13:30 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 11/32] pve-rs: fabrics: include VRF routes in aggregate status Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 12/32] pve-rs: fabrics: expose host interface membership Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-perl-rs v3 13/32] sdn: expose static routes for simple zone uplinks Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 14/32] sdn: evpn: add unreachable IPv6 default route to zone VRFs Gabriel Goller
2026-11-18 16:08 ` Stefan Hanreich
2026-11-18 16:39 ` Stefan Hanreich
2026-11-19 13:38 ` Gabriel Goller
2026-11-19 15:51 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 15/32] sdn: add optional VRFs for simple zones Gabriel Goller
2026-11-18 16:18 ` Stefan Hanreich
2026-11-19 13:44 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 16/32] sdn: allow fabrics to use simple zone VRFs Gabriel Goller
2026-11-18 16:27 ` Stefan Hanreich
2026-11-19 14:14 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 17/32] sdn: require underlay fabrics to use the default VRF Gabriel Goller
2026-11-18 16:30 ` Stefan Hanreich
2026-11-19 14:33 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 18/32] sdn: always generate EVPN zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 19/32] api: sdn: allow EVPN zones as fabric VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 20/32] api: sdn: disallow BGP fabrics in EVPN zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 21/32] sdn: simple: support static routes in zone routing tables Gabriel Goller
2026-11-18 16:49 ` Stefan Hanreich
2026-11-19 14:53 ` Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 22/32] sdn: evpn: allow static routes Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 23/32] sdn: zones: SNAT via dedicated uplinks in zone VRFs Gabriel Goller
2026-11-18 18:07 ` Stefan Hanreich
2026-11-16 16:11 ` [PATCH pve-network v3 24/32] sdn: dhcp: only configure DHCP for zones on the local node Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-network v3 25/32] sdn: dhcp: run dnsmasq in the zone VRF Gabriel Goller
2026-11-16 16:11 ` [PATCH proxmox-widget-toolkit v3 26/32] ui: network: allow selecting a VRF for host interfaces Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 27/32] ui: sdn: add VRF zone selection for fabrics Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 28/32] ui: sdn: expose EVPN zones as fabric VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 29/32] network: allow setting the VRF of host interfaces Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 30/32] ui: sdn: allow static routes for Simple zone VRFs Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 31/32] ui: sdn: allow static routes in EVPN zones Gabriel Goller
2026-11-16 16:11 ` [PATCH pve-manager v3 32/32] network: generate SDN DHCP config after ifreload Gabriel Goller
2026-11-18 18:27 ` [PATCH common/manager/network/proxmox{-ve-rs,-perl-rs,-widget-toolkit} v3 00/32] SDN VRF support Stefan Hanreich
2026-11-19 15:33 ` Gabriel Goller
2026-11-19 20:10 ` Gabriel Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=393d6979-8a84-4f81-83e1-c2a08518cfa3@proxmox.com \
--to=s.hanreich@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox