public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
From: Gabriel Goller <g.goller@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH manager/network/proxmox-ve-rs v2 0/3] Expose OSPF Network-Type option
Date: Tue,  5 May 2026 11:13:35 +0200	[thread overview]
Message-ID: <20260505091342.106949-1-g.goller@proxmox.com> (raw)

Previously the network-type option on OSPF interfaces was set to either
point-to-point or broadcast, depending on if an ip address was configured on
the interface. This is not enough, as some users want to have a switched
network (e.g. switch) between their nodes, which calls for the
point-to-multipoint network type.

In order to uphold backwards-compatibility, make network-type an `Option`,
where `None` will be the "automatic" network-type selection we had before.

                                                                     
        ┌──────────┐   ┌──────────────┐  ┌───────────────────┐  ┌───┐
        │None(auto)│   │Point-to-Point│  │Point-to-Multipoint│  │...│
        └────┬─────┘   └──────────────┘  └───────────────────┘  └───┘
             │                                                       
             ▼                                                       
       ┌─────────────────┐                                           
       │Is there an ip   │                                           
       │on the interface?│                                           
       └──┬────────────┬─┘                                           
          │no          │yes                                          
          ▼            ▼                                             
┌──────────────┐    ┌────────────────────────┐                       
│Point-to-Point│    │No FRR network statement│                       
└──────────────┘    └───────────┬────────────┘                       
                                │                                    
                                ▼                                    
                  ┌────────────────────────────┐                     
                  │FRR selects either Broadcast│                     
                  │Point-to-Point or Loopback  │                     
                  │(internal network-type)     │                     
                  └────────────────────────────┘                     


This series is based on the s.hanreich/pve-dci branch.

Changelog v1:
 * rebased


proxmox-ve-rs:

Gabriel Goller (1):
  fabrics: ospf: expose network-type interface property

 proxmox-frr/src/ser/ospf.rs                   | 20 +--------------
 proxmox-sdn-types/src/lib.rs                  |  2 +-
 proxmox-sdn-types/src/{area.rs => ospf.rs}    | 25 +++++++++++++++++++
 proxmox-ve-config/src/sdn/fabric/frr.rs       | 13 +++++++---
 .../fabric/section_config/protocol/ospf.rs    |  8 +++++-
 5 files changed, 43 insertions(+), 25 deletions(-)
 rename proxmox-sdn-types/src/{area.rs => ospf.rs} (65%)


pve-network:

Gabriel Goller (1):
  fabrics: add ospf network_type property to interfaces

 src/PVE/Network/SDN/Fabrics.pm | 11 +++++++++++
 1 file changed, 11 insertions(+)


pve-manager:

Gabriel Goller (1):
  fabrics: ospf: add network-type property in interface panel

 .../sdn/fabrics/ospf/InterfacePanel.js        | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)


Summary over all repositories:
  7 files changed, 103 insertions(+), 25 deletions(-)

-- 
Generated by murpp 0.11.0




             reply	other threads:[~2026-05-05  9:14 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-05  9:13 Gabriel Goller [this message]
2026-05-05  9:13 ` [PATCH proxmox-ve-rs v2 1/3] fabrics: ospf: expose network-type interface property Gabriel Goller
2026-05-05  9:13 ` [PATCH pve-network v2 2/3] fabrics: add ospf network_type property to interfaces Gabriel Goller
2026-05-05  9:13 ` [PATCH pve-manager v2 3/3] fabrics: ospf: add network-type property in interface panel Gabriel Goller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260505091342.106949-1-g.goller@proxmox.com \
    --to=g.goller@proxmox.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal