From: Marco Gaiarin <gaio@lilliput.linux.it>
To: pve-user@lists.proxmox.com
Subject: Re: [PVE-User] OfflineUncorrectableSector, and now?!
Date: Mon, 28 Nov 2022 13:16:24 +0100 [thread overview]
Message-ID: <Y4SmmJFsc/BJ8IIy@sv.lnf.it> (raw)
In-Reply-To: <20221127164412.6c642299@macbookair>
Mandi! Yannick Palanque
In chel di` si favelave...
> What is the full output of `smartctl -a /dev/sda`?
root@pspve2:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.4.178-1-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HFS480G32FEH-BA10A
Serial Number: ESABN5131I080BA2O
LU WWN Device Id: 5 ace42e 025406ebe
Add. Product Id: DELL(tm)
Firmware Version: DD02
User Capacity: 480,103,981,056 bytes [480 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Nov 28 13:14:10 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 110) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000e 100 100 006 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 002 Pre-fail Always - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5763
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 22
13 Read_Soft_Error_Rate 0x002e 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 34
175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 13
179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 002 Pre-fail Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0010 100 100 000 Old_age Offline - 1517
181 Program_Fail_Cnt_Total 0x0032 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 067 057 000 Old_age Always - 33 (Min/Max 16/43)
195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
201 Unknown_SSD_Attribute 0x0033 100 100 050 Pre-fail Always - 0
202 Unknown_SSD_Attribute 0x0033 100 100 050 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 7361
235 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 7361
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 8936
245 Unknown_Attribute 0x0033 100 100 001 Pre-fail Always - 100
SMART Error Log not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
next prev parent reply other threads:[~2022-11-28 12:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 11:02 Marco Gaiarin
[not found] ` <mailman.213.1669277536.284.pve-user@lists.proxmox.com>
2022-11-24 9:52 ` Alain Péan
2022-11-25 11:11 ` Marco Gaiarin
2022-11-27 15:44 ` Yannick Palanque
2022-11-28 12:16 ` Marco Gaiarin [this message]
2022-11-28 22:36 ` Yannick Palanque
2022-12-12 16:07 ` Marco Gaiarin
2022-12-13 10:51 ` Stefan Hanreich
[not found] ` <ad8d7d3c-0bcc-8a53-588d-d0e75875f925@proxmox.com>
2022-12-17 12:09 ` Marco Gaiarin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y4SmmJFsc/BJ8IIy@sv.lnf.it \
--to=gaio@lilliput.linux.it \
--cc=pve-user@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox