* [PVE-User] Guidance requested to make use of command line to take the back up of my VM to CIFS /NFS share
@ 2023-08-04 9:06 Joseph John
2023-08-04 9:16 ` Joseph John
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Joseph John @ 2023-08-04 9:06 UTC (permalink / raw)
To: Proxmox VE user list
Dear All,
Good afternoon
I was trying to take backup of VM to NFS /CIFS share, We have created the
NFS and CIFS share and it shows in "df -h" , but do not show in the storage
drop down when I choose the backup of VM instance
But when I give a df-h , I get the results
oot@server-1:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 378G 0 378G 0% /dev
tmpfs 76G 13M 76G 1% /run
/dev/mapper/pve-root 29G 6.2G 22G 23% /
tmpfs 378G 69M 378G 1% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 378G 0 378G 0%
/sys/fs/cgroup
/dev/sdb2 511M 312K 511M 1% /boot/efi
/dev/fuse 30M 72K 30M 1% /etc/pve
*//10.115.129.160/proxmox <http://10.115.129.160/proxmox>
1.0T 359G 666G 36%
/mnt/pve/backup10.115.129.169:/home/itsupport/nfsshare 1017G 14G 955G
2% /mnt/pve/nfsbackup*
tmpfs 76G 0 76G 0% /run/user/0
So from the df -h , we can see the CIFS and NFS, but through the web
interfaces, backup option do not show them in the drop down menu.
I am thinking in this situation, to make use command line and run the
backup so that I can specify the location (cifs or nfs share) to which I
can copy the disk image
Thanks
Joseph John
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PVE-User] Guidance requested to make use of command line to take the back up of my VM to CIFS /NFS share
2023-08-04 9:06 [PVE-User] Guidance requested to make use of command line to take the back up of my VM to CIFS /NFS share Joseph John
@ 2023-08-04 9:16 ` Joseph John
2023-08-04 10:28 ` Deepen Dhulla
[not found] ` <mailman.96.1691150730.335.pve-user@lists.proxmox.com>
2 siblings, 0 replies; 4+ messages in thread
From: Joseph John @ 2023-08-04 9:16 UTC (permalink / raw)
To: Proxmox VE user list
Dear All
I am going to try
vzdump [vmno] --dumpdir */mnt/pve/backup* --mode snapshot
Will post the result to the group
thanks
On Fri, Aug 4, 2023 at 1:06 PM Joseph John <jjk.saji@gmail.com> wrote:
> Dear All,
> Good afternoon
> I was trying to take backup of VM to NFS /CIFS share, We have created the
> NFS and CIFS share and it shows in "df -h" , but do not show in the storage
> drop down when I choose the backup of VM instance
>
> But when I give a df-h , I get the results
>
> oot@server-1:~# df -h
> Filesystem Size Used Avail Use% Mounted on
> udev 378G 0 378G 0% /dev
> tmpfs 76G 13M 76G 1% /run
> /dev/mapper/pve-root 29G 6.2G 22G 23% /
> tmpfs 378G 69M 378G 1% /dev/shm
> tmpfs 5.0M 0 5.0M 0% /run/lock
> tmpfs 378G 0 378G 0%
> /sys/fs/cgroup
> /dev/sdb2 511M 312K 511M 1% /boot/efi
> /dev/fuse 30M 72K 30M 1% /etc/pve
>
> *//10.115.129.160/proxmox <http://10.115.129.160/proxmox>
> 1.0T 359G 666G 36%
> /mnt/pve/backup10.115.129.169:/home/itsupport/nfsshare 1017G 14G 955G
> 2% /mnt/pve/nfsbackup*
> tmpfs 76G 0 76G 0% /run/user/0
>
>
> So from the df -h , we can see the CIFS and NFS, but through the web
> interfaces, backup option do not show them in the drop down menu.
> I am thinking in this situation, to make use command line and run the
> backup so that I can specify the location (cifs or nfs share) to which I
> can copy the disk image
>
>
>
> Thanks
> Joseph John
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PVE-User] Guidance requested to make use of command line to take the back up of my VM to CIFS /NFS share
2023-08-04 9:06 [PVE-User] Guidance requested to make use of command line to take the back up of my VM to CIFS /NFS share Joseph John
2023-08-04 9:16 ` Joseph John
@ 2023-08-04 10:28 ` Deepen Dhulla
[not found] ` <mailman.96.1691150730.335.pve-user@lists.proxmox.com>
2 siblings, 0 replies; 4+ messages in thread
From: Deepen Dhulla @ 2023-08-04 10:28 UTC (permalink / raw)
To: Proxmox VE user list
Hello Joseph
make sure you have selected "vmzdump" in contain type for your
added-backup-nfs storage.
-Deepen.
_With each tiny piece and a touch of art, a masterpiece is created,
igniting the heart._
[1]
Deepen Dhulla
Director & CTO [2]
Email: deepen@technoinfotech.com
Mobile: +91-9320214357 [3]
Web: http://www.technoinfotech.com
2nd Floor, Manu Mansion, S.B.Road, Fort, Mumbai 400001, Maharashtra,
India
On Friday, 04-08-2023 at 14:36 Joseph John wrote:
Dear All,
Good afternoon
I was trying to take backup of VM to NFS /CIFS share, We have
created the
NFS and CIFS share and it shows in "df -h" , but do not show in the
storage
drop down when I choose the backup of VM instance
But when I give a df-h , I get the results
oot@server-1:~# df -h
Filesystem
Size Used Avail Use% Mounted on
udev
378G 0 378G 0% /dev
tmpfs
76G 13M 76G 1% /run
/dev/mapper/pve-root 29G 6.2G
22G 23% /
tmpfs 378G
69M 378G 1% /dev/shm
tmpfs 5.0M
0 5.0M 0% /run/lock
tmpfs 378G
0 378G 0%
/sys/fs/cgroup
/dev/sdb2 511M 312K 511M
1% /boot/efi
/dev/fuse
30M 72K 30M 1% /etc/pve
*//10.115.129.160/proxmox
1.0T 359G 666G 36%
/mnt/pve/backup10.115.129.169:/home/itsupport/nfsshare 1017G
14G 955G
2% /mnt/pve/nfsbackup*
tmpfs
76G 0 76G 0% /run/user/0
So from the df -h , we can see the CIFS and NFS, but through the web
interfaces, backup option do not show them in the drop down menu.
I am thinking in this situation, to make use command line and run the
backup so that I can specify the location (cifs or nfs share) to which
I
can copy the disk image
Thanks
Joseph John
_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Links:
------
[1] https://deependhulla.com/
[2] http://www.technoinfotech.com
[3] tel:+919320214357
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PVE-User] Guidance requested to make use of command line to take the back up of my VM to CIFS /NFS share
[not found] ` <mailman.96.1691150730.335.pve-user@lists.proxmox.com>
@ 2023-08-10 11:30 ` Joseph John
0 siblings, 0 replies; 4+ messages in thread
From: Joseph John @ 2023-08-10 11:30 UTC (permalink / raw)
To: Proxmox VE user list
Dear All,
THANKS
vzdump [vmno] --dumpdir */mnt/pve/backup* --mode snapshot
this worked and we were able to migrate the instances
thanks
Thanks
Joseph John
On Fri, Aug 4, 2023 at 4:05 PM Stefan Radman via pve-user <
pve-user@lists.proxmox.com> wrote:
>
>
>
> ---------- Forwarded message ----------
> From: Stefan Radman <stefan.radman@me.com>
> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> Cc:
> Bcc:
> Date: Fri, 4 Aug 2023 14:04:44 +0200
> Subject: Re: [PVE-User] Guidance requested to make use of command line to
> take the back up of my VM to CIFS /NFS share
> Hi Joseph
>
> > I was trying to take backup of VM to NFS /CIFS share, We have created
> the
> > NFS and CIFS share and it shows in "df -h" , but do not show in the
> storage
> > drop down when I choose the backup of VM instance
>
> Make sure to select Content => “VZDump backup file” in the PVE Datacenter
> => Storage properties of your “backup” share.
>
> Then you should see it show up in the Virtual Machine => Backup => Storage
> dropdown.
>
> > I am thinking in this situation, to make use command line and run the
>
>
> No need to use the command line.
> It can all be done from the GUI, much more conveniently.
>
> Regards
>
> Stefan
>
> > On Aug 4, 2023, at 11:06, Joseph John <jjk.saji@gmail.com <mailto:
> jjk.saji@gmail.com>> wrote:
> >
> > Dear All,
> > Good afternoon
> > I was trying to take backup of VM to NFS /CIFS share, We have created
> the
> > NFS and CIFS share and it shows in "df -h" , but do not show in the
> storage
> > drop down when I choose the backup of VM instance
> >
> > But when I give a df-h , I get the results
> >
> > oot@server-1:~# df -h
> > Filesystem Size Used Avail Use% Mounted on
> > udev 378G 0 378G 0% /dev
> > tmpfs 76G 13M 76G 1% /run
> > /dev/mapper/pve-root 29G 6.2G 22G 23% /
> > tmpfs 378G 69M 378G 1% /dev/shm
> > tmpfs 5.0M 0 5.0M 0% /run/lock
> > tmpfs 378G 0 378G 0%
> > /sys/fs/cgroup
> > /dev/sdb2 511M 312K 511M 1% /boot/efi
> > /dev/fuse 30M 72K 30M 1% /etc/pve
> >
> > *//10.115.129.160/proxmox <http://10.115.129.160/proxmox <
> http://10.115.129.160/proxmox>>
> > 1.0T 359G 666G 36%
> > /mnt/pve/backup10.115.129.169:/home/itsupport/nfsshare 1017G 14G 955G
> > 2% /mnt/pve/nfsbackup*
> > tmpfs 76G 0 76G 0%
> /run/user/0
> >
> >
> > So from the df -h , we can see the CIFS and NFS, but through the web
> > interfaces, backup option do not show them in the drop down menu.
> > I am thinking in this situation, to make use command line and run the
> > backup so that I can specify the location (cifs or nfs share) to which I
> > can copy the disk image
> >
> >
> >
> > Thanks
> > Joseph John
> > _______________________________________________
> > pve-user mailing list
> > pve-user@lists.proxmox.com <mailto:pve-user@lists.proxmox.com>
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
>
>
>
>
> ---------- Forwarded message ----------
> From: Stefan Radman via pve-user <pve-user@lists.proxmox.com>
> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> Cc: Stefan Radman <stefan.radman@me.com>
> Bcc:
> Date: Fri, 4 Aug 2023 14:04:44 +0200
> Subject: Re: [PVE-User] Guidance requested to make use of command line to
> take the back up of my VM to CIFS /NFS share
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-08-10 11:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-08-04 9:06 [PVE-User] Guidance requested to make use of command line to take the back up of my VM to CIFS /NFS share Joseph John
2023-08-04 9:16 ` Joseph John
2023-08-04 10:28 ` Deepen Dhulla
[not found] ` <mailman.96.1691150730.335.pve-user@lists.proxmox.com>
2023-08-10 11:30 ` Joseph John
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox