[PVE-User] Solidworks 2020 refuse to help me

[PVE-User] Solidworks 2020 refuse to help me

[David Martin]

Hi everybody,
I have been trying for 3 weeks to install and find a solution to make
solidworks 2020 license server work.
Solidworks software refused to help us !
The problem is that we have 300 high schools with proxmox server.
anybody have found a solution to install and run solidworks server license
2020 on proxmox 6.2 ?

I need information if it's possible (on 6.2) to masquing all information
hardware on vm, is it possible ?
(i try different old solution who i found on google, but not work on PVE
6.2)

;-(

Best regards
-- 
david martin

Re: [PVE-User] Solidworks 2020 refuse to help me

[Roland privat]

according to solidworks faq at https://www.solidworks.com/sw/support/1092_ENU_HTML.htm#NQ12 and system requirements they support hypervisors, the question is if the license service does detect this and refuses to work on proxmox hypervisor.

you need to be more specific about your problem, there should be a log telling that it fails and why....


Von meinem iPhone gesendet

> Am 03.12.2020 um 15:20 schrieb David Martin <damart.vidin@gmail.com>:
> 
> Hi everybody,
> I have been trying for 3 weeks to install and find a solution to make
> solidworks 2020 license server work.
> Solidworks software refused to help us !
> The problem is that we have 300 high schools with proxmox server.
> anybody have found a solution to install and run solidworks server license
> 2020 on proxmox 6.2 ?
> 
> I need information if it's possible (on 6.2) to masquing all information
> hardware on vm, is it possible ?
> (i try different old solution who i found on google, but not work on PVE
> 6.2)
> 
> ;-(
> 
> Best regards
> -- 
> david martin
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 

Re: [PVE-User] Solidworks 2020 refuse to help me

[David Martin]

Solidworks run only windows server
i create windows 2016 server
When solidworks 2020 starting install, he detecting who run on proxmox and
solidworks not run on proxmox.

Prerequis is :
*Hyperviseurs (Environnements virtuels)*


SOLIDWORKS *2018*

SOLIDWORKS *2019*
SOLIDWORKS *2020*
VMware vSphere ESXi 6.0 6.5 6.7
Station de travail VMware 9 14 15
Microsoft Hyper-V 2012 2016 2019
Parallels Desktop, Mac 10 14 14
Citrix XenServer 6.2 7.4 7.6
Not Proxmox...

It's a big big problem for us

Le jeu. 3 déc. 2020 à 15:23, Mark Adams via pve-user <
pve-user@lists.proxmox.com> a écrit :

>
>
>
> ---------- Forwarded message ----------
> From: Mark Adams <mark@openvs.co.uk>
> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> Cc:
> Bcc:
> Date: Thu, 3 Dec 2020 14:22:44 +0000
> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> Why is it not working? Does it refuse to run when Windows is detecting that
> it is virtualised?
>
> On Thu, 3 Dec 2020 at 14:20, David Martin <damart.vidin@gmail.com> wrote:
>
> > Hi everybody,
> > I have been trying for 3 weeks to install and find a solution to make
> > solidworks 2020 license server work.
> > Solidworks software refused to help us !
> > The problem is that we have 300 high schools with proxmox server.
> > anybody have found a solution to install and run solidworks server
> license
> > 2020 on proxmox 6.2 ?
> >
> > I need information if it's possible (on 6.2) to masquing all information
> > hardware on vm, is it possible ?
> > (i try different old solution who i found on google, but not work on PVE
> > 6.2)
> >
> > ;-(
> >
> > Best regards
> > --
> > david martin
> > _______________________________________________
> > pve-user mailing list
> > pve-user@lists.proxmox.com
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
> >
>
>
>
> ---------- Forwarded message ----------
> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> Cc: Mark Adams <mark@openvs.co.uk>
> Bcc:
> Date: Thu, 3 Dec 2020 14:22:44 +0000
> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>


-- 
david martin

Re: [PVE-User] Solidworks 2020 refuse to help me

[David Martin]

I try all solution who i found on internet.

i 'm looking for solution to masquing hardware to deceive solidwork who
detecting proxmox.


Le jeu. 3 déc. 2020 à 15:45, David Martin <damart.vidin@gmail.com> a écrit :

> Solidworks run only windows server
> i create windows 2016 server
> When solidworks 2020 starting install, he detecting who run on proxmox and
> solidworks not run on proxmox.
>
> Prerequis is :
> *Hyperviseurs (Environnements virtuels)*
>
>
> SOLIDWORKS *2018*
>
> SOLIDWORKS *2019*
> SOLIDWORKS *2020*
> VMware vSphere ESXi 6.0 6.5 6.7
> Station de travail VMware 9 14 15
> Microsoft Hyper-V 2012 2016 2019
> Parallels Desktop, Mac 10 14 14
> Citrix XenServer 6.2 7.4 7.6
> Not Proxmox...
>
> It's a big big problem for us
>
> Le jeu. 3 déc. 2020 à 15:23, Mark Adams via pve-user <
> pve-user@lists.proxmox.com> a écrit :
>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Mark Adams <mark@openvs.co.uk>
>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
>> Cc:
>> Bcc:
>> Date: Thu, 3 Dec 2020 14:22:44 +0000
>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
>> Why is it not working? Does it refuse to run when Windows is detecting
>> that
>> it is virtualised?
>>
>> On Thu, 3 Dec 2020 at 14:20, David Martin <damart.vidin@gmail.com> wrote:
>>
>> > Hi everybody,
>> > I have been trying for 3 weeks to install and find a solution to make
>> > solidworks 2020 license server work.
>> > Solidworks software refused to help us !
>> > The problem is that we have 300 high schools with proxmox server.
>> > anybody have found a solution to install and run solidworks server
>> license
>> > 2020 on proxmox 6.2 ?
>> >
>> > I need information if it's possible (on 6.2) to masquing all information
>> > hardware on vm, is it possible ?
>> > (i try different old solution who i found on google, but not work on PVE
>> > 6.2)
>> >
>> > ;-(
>> >
>> > Best regards
>> > --
>> > david martin
>> > _______________________________________________
>> > pve-user mailing list
>> > pve-user@lists.proxmox.com
>> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>> >
>> >
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
>> Cc: Mark Adams <mark@openvs.co.uk>
>> Bcc:
>> Date: Thu, 3 Dec 2020 14:22:44 +0000
>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
>> _______________________________________________
>> pve-user mailing list
>> pve-user@lists.proxmox.com
>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
>
>
> --
> david martin
>
>

-- 
david martin

Re: [PVE-User] Solidworks 2020 refuse to help me

[David Martin]

obiovously, and how can i do ?


Le jeu. 3 déc. 2020 à 15:52, Mark Adams via pve-user <
pve-user@lists.proxmox.com> a écrit :

>
>
>
> ---------- Forwarded message ----------
> From: Mark Adams <mark@openvs.co.uk>
> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> Cc:
> Bcc:
> Date: Thu, 3 Dec 2020 14:52:00 +0000
> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> I could be wrong about this as I haven't installed Solidworks license
> server in particular, but most software vendors have a list of "supported
> hypervisors" like that, because they won't want to have to support anything
> OTHER than those. Essentially it's just an excuse for them to not have to
> have people that know more about open source virtualisation.
>
> I doubt that they would be intentionally detecting Proxmox (KVM) - normally
> they look for QEMU but that is also part of the hypervisors they do
> support...
>
> More likely something is just going wrong with your config of the software.
>
> On Thu, 3 Dec 2020 at 14:49, David Martin <damart.vidin@gmail.com> wrote:
>
> > I try all solution who i found on internet.
> >
> > i 'm looking for solution to masquing hardware to deceive solidwork who
> > detecting proxmox.
> >
> >
> > Le jeu. 3 déc. 2020 à 15:45, David Martin <damart.vidin@gmail.com> a
> > écrit :
> >
> > > Solidworks run only windows server
> > > i create windows 2016 server
> > > When solidworks 2020 starting install, he detecting who run on proxmox
> > and
> > > solidworks not run on proxmox.
> > >
> > > Prerequis is :
> > > *Hyperviseurs (Environnements virtuels)*
> > >
> > >
> > > SOLIDWORKS *2018*
> > >
> > > SOLIDWORKS *2019*
> > > SOLIDWORKS *2020*
> > > VMware vSphere ESXi 6.0 6.5 6.7
> > > Station de travail VMware 9 14 15
> > > Microsoft Hyper-V 2012 2016 2019
> > > Parallels Desktop, Mac 10 14 14
> > > Citrix XenServer 6.2 7.4 7.6
> > > Not Proxmox...
> > >
> > > It's a big big problem for us
> > >
> > > Le jeu. 3 déc. 2020 à 15:23, Mark Adams via pve-user <
> > > pve-user@lists.proxmox.com> a écrit :
> > >
> > >>
> > >>
> > >>
> > >> ---------- Forwarded message ----------
> > >> From: Mark Adams <mark@openvs.co.uk>
> > >> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> > >> Cc:
> > >> Bcc:
> > >> Date: Thu, 3 Dec 2020 14:22:44 +0000
> > >> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> > >> Why is it not working? Does it refuse to run when Windows is detecting
> > >> that
> > >> it is virtualised?
> > >>
> > >> On Thu, 3 Dec 2020 at 14:20, David Martin <damart.vidin@gmail.com>
> > wrote:
> > >>
> > >> > Hi everybody,
> > >> > I have been trying for 3 weeks to install and find a solution to
> make
> > >> > solidworks 2020 license server work.
> > >> > Solidworks software refused to help us !
> > >> > The problem is that we have 300 high schools with proxmox server.
> > >> > anybody have found a solution to install and run solidworks server
> > >> license
> > >> > 2020 on proxmox 6.2 ?
> > >> >
> > >> > I need information if it's possible (on 6.2) to masquing all
> > information
> > >> > hardware on vm, is it possible ?
> > >> > (i try different old solution who i found on google, but not work on
> > PVE
> > >> > 6.2)
> > >> >
> > >> > ;-(
> > >> >
> > >> > Best regards
> > >> > --
> > >> > david martin
> > >> > _______________________________________________
> > >> > pve-user mailing list
> > >> > pve-user@lists.proxmox.com
> > >> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> > >> >
> > >> >
> > >>
> > >>
> > >>
> > >> ---------- Forwarded message ----------
> > >> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
> > >> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> > >> Cc: Mark Adams <mark@openvs.co.uk>
> > >> Bcc:
> > >> Date: Thu, 3 Dec 2020 14:22:44 +0000
> > >> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> > >> _______________________________________________
> > >> pve-user mailing list
> > >> pve-user@lists.proxmox.com
> > >> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> > >>
> > >
> > >
> > > --
> > > david martin
> > >
> > >
> >
> > --
> > david martin
> > _______________________________________________
> > pve-user mailing list
> > pve-user@lists.proxmox.com
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
>
>
>
> ---------- Forwarded message ----------
> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> Cc: Mark Adams <mark@openvs.co.uk>
> Bcc:
> Date: Thu, 3 Dec 2020 14:52:00 +0000
> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>


-- 
david martin

Re: [PVE-User] Solidworks 2020 refuse to help me

[Roland]

if solidworks is detecting proxmox and refusing to run on that, then
there is nothing proxmox community can do for you (besides recommending
using software which does not restrict users in such a way)

playing tricks on their licensing server may bring you in trouble twice
- first you probably break licensing agreements second solidworks always
may change their code which may render your tricks ineffective

 >The problem is that we have 300 high schools with proxmox server.

you mean you need to setup 300 license servers? omg ! 😂🙈  (i
understand your problem then and would recommend talking to solidworks
about that - otherwise i would bring that into public discussion, as
solidworks makes you burn additional public money...)



Am 03.12.20 um 15:48 schrieb David Martin:
> I try all solution who i found on internet.
>
> i 'm looking for solution to masquing hardware to deceive solidwork who
> detecting proxmox.
>
>
> Le jeu. 3 déc. 2020 à 15:45, David Martin <damart.vidin@gmail.com> a écrit :
>
>> Solidworks run only windows server
>> i create windows 2016 server
>> When solidworks 2020 starting install, he detecting who run on proxmox and
>> solidworks not run on proxmox.
>>
>> Prerequis is :
>> *Hyperviseurs (Environnements virtuels)*
>>
>>
>> SOLIDWORKS *2018*
>>
>> SOLIDWORKS *2019*
>> SOLIDWORKS *2020*
>> VMware vSphere ESXi 6.0 6.5 6.7
>> Station de travail VMware 9 14 15
>> Microsoft Hyper-V 2012 2016 2019
>> Parallels Desktop, Mac 10 14 14
>> Citrix XenServer 6.2 7.4 7.6
>> Not Proxmox...
>>
>> It's a big big problem for us
>>
>> Le jeu. 3 déc. 2020 à 15:23, Mark Adams via pve-user <
>> pve-user@lists.proxmox.com> a écrit :
>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Mark Adams <mark@openvs.co.uk>
>>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
>>> Cc:
>>> Bcc:
>>> Date: Thu, 3 Dec 2020 14:22:44 +0000
>>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
>>> Why is it not working? Does it refuse to run when Windows is detecting
>>> that
>>> it is virtualised?
>>>
>>> On Thu, 3 Dec 2020 at 14:20, David Martin <damart.vidin@gmail.com> wrote:
>>>
>>>> Hi everybody,
>>>> I have been trying for 3 weeks to install and find a solution to make
>>>> solidworks 2020 license server work.
>>>> Solidworks software refused to help us !
>>>> The problem is that we have 300 high schools with proxmox server.
>>>> anybody have found a solution to install and run solidworks server
>>> license
>>>> 2020 on proxmox 6.2 ?
>>>>
>>>> I need information if it's possible (on 6.2) to masquing all information
>>>> hardware on vm, is it possible ?
>>>> (i try different old solution who i found on google, but not work on PVE
>>>> 6.2)
>>>>
>>>> ;-(
>>>>
>>>> Best regards
>>>> --
>>>> david martin
>>>> _______________________________________________
>>>> pve-user mailing list
>>>> pve-user@lists.proxmox.com
>>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>>>
>>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
>>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
>>> Cc: Mark Adams <mark@openvs.co.uk>
>>> Bcc:
>>> Date: Thu, 3 Dec 2020 14:22:44 +0000
>>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
>>> _______________________________________________
>>> pve-user mailing list
>>> pve-user@lists.proxmox.com
>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>>
>>
>> --
>> david martin
>>
>>

Re: [PVE-User] Solidworks 2020 refuse to help me

[David Martin]

Hi,
Yes 300 proxmox servers with one virtual machine on each.

Solidworks don't have a solution.

Thank you.

Best regards


Le jeu. 3 déc. 2020 à 17:41, Roland <devzero@web.de> a écrit :

> if solidworks is detecting proxmox and refusing to run on that, then
> there is nothing proxmox community can do for you (besides recommending
> using software which does not restrict users in such a way)
>
> playing tricks on their licensing server may bring you in trouble twice
> - first you probably break licensing agreements second solidworks always
> may change their code which may render your tricks ineffective
>
>  >The problem is that we have 300 high schools with proxmox server.
>
> you mean you need to setup 300 license servers? omg ! 😂🙈  (i
> understand your problem then and would recommend talking to solidworks
> about that - otherwise i would bring that into public discussion, as
> solidworks makes you burn additional public money...)
>
>
>
> Am 03.12.20 um 15:48 schrieb David Martin:
> > I try all solution who i found on internet.
> >
> > i 'm looking for solution to masquing hardware to deceive solidwork who
> > detecting proxmox.
> >
> >
> > Le jeu. 3 déc. 2020 à 15:45, David Martin <damart.vidin@gmail.com> a
> écrit :
> >
> >> Solidworks run only windows server
> >> i create windows 2016 server
> >> When solidworks 2020 starting install, he detecting who run on proxmox
> and
> >> solidworks not run on proxmox.
> >>
> >> Prerequis is :
> >> *Hyperviseurs (Environnements virtuels)*
> >>
> >>
> >> SOLIDWORKS *2018*
> >>
> >> SOLIDWORKS *2019*
> >> SOLIDWORKS *2020*
> >> VMware vSphere ESXi 6.0 6.5 6.7
> >> Station de travail VMware 9 14 15
> >> Microsoft Hyper-V 2012 2016 2019
> >> Parallels Desktop, Mac 10 14 14
> >> Citrix XenServer 6.2 7.4 7.6
> >> Not Proxmox...
> >>
> >> It's a big big problem for us
> >>
> >> Le jeu. 3 déc. 2020 à 15:23, Mark Adams via pve-user <
> >> pve-user@lists.proxmox.com> a écrit :
> >>
> >>>
> >>>
> >>> ---------- Forwarded message ----------
> >>> From: Mark Adams <mark@openvs.co.uk>
> >>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> >>> Cc:
> >>> Bcc:
> >>> Date: Thu, 3 Dec 2020 14:22:44 +0000
> >>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> >>> Why is it not working? Does it refuse to run when Windows is detecting
> >>> that
> >>> it is virtualised?
> >>>
> >>> On Thu, 3 Dec 2020 at 14:20, David Martin <damart.vidin@gmail.com>
> wrote:
> >>>
> >>>> Hi everybody,
> >>>> I have been trying for 3 weeks to install and find a solution to make
> >>>> solidworks 2020 license server work.
> >>>> Solidworks software refused to help us !
> >>>> The problem is that we have 300 high schools with proxmox server.
> >>>> anybody have found a solution to install and run solidworks server
> >>> license
> >>>> 2020 on proxmox 6.2 ?
> >>>>
> >>>> I need information if it's possible (on 6.2) to masquing all
> information
> >>>> hardware on vm, is it possible ?
> >>>> (i try different old solution who i found on google, but not work on
> PVE
> >>>> 6.2)
> >>>>
> >>>> ;-(
> >>>>
> >>>> Best regards
> >>>> --
> >>>> david martin
> >>>> _______________________________________________
> >>>> pve-user mailing list
> >>>> pve-user@lists.proxmox.com
> >>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >>>>
> >>>>
> >>>
> >>>
> >>> ---------- Forwarded message ----------
> >>> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
> >>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> >>> Cc: Mark Adams <mark@openvs.co.uk>
> >>> Bcc:
> >>> Date: Thu, 3 Dec 2020 14:22:44 +0000
> >>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> >>> _______________________________________________
> >>> pve-user mailing list
> >>> pve-user@lists.proxmox.com
> >>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >>>
> >>
> >> --
> >> david martin
> >>
> >>
>


-- 
david martin

Re: [PVE-User] Solidworks 2020 refuse to help me

[Guy]

Have you tried selecting different CPU from the drop down list?  Many cam detecting system are checking on the CPU type. 

---Guy
(via iPhone)

> On 14 Dec 2020, at 06:47, David Martin <damart.vidin@gmail.com> wrote:
> 
> Hi,
> Yes 300 proxmox servers with one virtual machine on each.
> 
> Solidworks don't have a solution.
> 
> Thank you.
> 
> Best regards
> 
> 
>> Le jeu. 3 déc. 2020 à 17:41, Roland <devzero@web.de> a écrit :
>> 
>> if solidworks is detecting proxmox and refusing to run on that, then
>> there is nothing proxmox community can do for you (besides recommending
>> using software which does not restrict users in such a way)
>> 
>> playing tricks on their licensing server may bring you in trouble twice
>> - first you probably break licensing agreements second solidworks always
>> may change their code which may render your tricks ineffective
>> 
>>> The problem is that we have 300 high schools with proxmox server.
>> 
>> you mean you need to setup 300 license servers? omg ! 😂🙈  (i
>> understand your problem then and would recommend talking to solidworks
>> about that - otherwise i would bring that into public discussion, as
>> solidworks makes you burn additional public money...)
>> 
>> 
>> 
>>> Am 03.12.20 um 15:48 schrieb David Martin:
>>> I try all solution who i found on internet.
>>> 
>>> i 'm looking for solution to masquing hardware to deceive solidwork who
>>> detecting proxmox.
>>> 
>>> 
>>> Le jeu. 3 déc. 2020 à 15:45, David Martin <damart.vidin@gmail.com> a
>> écrit :
>>> 
>>>> Solidworks run only windows server
>>>> i create windows 2016 server
>>>> When solidworks 2020 starting install, he detecting who run on proxmox
>> and
>>>> solidworks not run on proxmox.
>>>> 
>>>> Prerequis is :
>>>> *Hyperviseurs (Environnements virtuels)*
>>>> 
>>>> 
>>>> SOLIDWORKS *2018*
>>>> 
>>>> SOLIDWORKS *2019*
>>>> SOLIDWORKS *2020*
>>>> VMware vSphere ESXi 6.0 6.5 6.7
>>>> Station de travail VMware 9 14 15
>>>> Microsoft Hyper-V 2012 2016 2019
>>>> Parallels Desktop, Mac 10 14 14
>>>> Citrix XenServer 6.2 7.4 7.6
>>>> Not Proxmox...
>>>> 
>>>> It's a big big problem for us
>>>> 
>>>> Le jeu. 3 déc. 2020 à 15:23, Mark Adams via pve-user <
>>>> pve-user@lists.proxmox.com> a écrit :
>>>> 
>>>>> 
>>>>> 
>>>>> ---------- Forwarded message ----------
>>>>> From: Mark Adams <mark@openvs.co.uk>
>>>>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
>>>>> Cc:
>>>>> Bcc:
>>>>> Date: Thu, 3 Dec 2020 14:22:44 +0000
>>>>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
>>>>> Why is it not working? Does it refuse to run when Windows is detecting
>>>>> that
>>>>> it is virtualised?
>>>>> 
>>>>> On Thu, 3 Dec 2020 at 14:20, David Martin <damart.vidin@gmail.com>
>> wrote:
>>>>> 
>>>>>> Hi everybody,
>>>>>> I have been trying for 3 weeks to install and find a solution to make
>>>>>> solidworks 2020 license server work.
>>>>>> Solidworks software refused to help us !
>>>>>> The problem is that we have 300 high schools with proxmox server.
>>>>>> anybody have found a solution to install and run solidworks server
>>>>> license
>>>>>> 2020 on proxmox 6.2 ?
>>>>>> 
>>>>>> I need information if it's possible (on 6.2) to masquing all
>> information
>>>>>> hardware on vm, is it possible ?
>>>>>> (i try different old solution who i found on google, but not work on
>> PVE
>>>>>> 6.2)
>>>>>> 
>>>>>> ;-(
>>>>>> 
>>>>>> Best regards
>>>>>> --
>>>>>> david martin
>>>>>> _______________________________________________
>>>>>> pve-user mailing list
>>>>>> pve-user@lists.proxmox.com
>>>>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>>>>> 
>>>>>> 
>>>>> 
>>>>> 
>>>>> ---------- Forwarded message ----------
>>>>> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
>>>>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
>>>>> Cc: Mark Adams <mark@openvs.co.uk>
>>>>> Bcc:
>>>>> Date: Thu, 3 Dec 2020 14:22:44 +0000
>>>>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
>>>>> _______________________________________________
>>>>> pve-user mailing list
>>>>> pve-user@lists.proxmox.com
>>>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>>>> 
>>>> 
>>>> --
>>>> david martin
>>>> 
>>>> 
>> 
> 
> 
> -- 
> david martin
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] Solidworks 2020 refuse to help me

[Laurent Dumont]

I guess you could have a Windows Server VM + HyperV on the proxmox host and
install Solidwork inside the Windows VM.

On Mon, Dec 14, 2020 at 1:57 AM Guy <guy@britewhite.net> wrote:

> Have you tried selecting different CPU from the drop down list?  Many cam
> detecting system are checking on the CPU type.
>
> ---Guy
> (via iPhone)
>
> > On 14 Dec 2020, at 06:47, David Martin <damart.vidin@gmail.com> wrote:
> >
> > Hi,
> > Yes 300 proxmox servers with one virtual machine on each.
> >
> > Solidworks don't have a solution.
> >
> > Thank you.
> >
> > Best regards
> >
> >
> >> Le jeu. 3 déc. 2020 à 17:41, Roland <devzero@web.de> a écrit :
> >>
> >> if solidworks is detecting proxmox and refusing to run on that, then
> >> there is nothing proxmox community can do for you (besides recommending
> >> using software which does not restrict users in such a way)
> >>
> >> playing tricks on their licensing server may bring you in trouble twice
> >> - first you probably break licensing agreements second solidworks always
> >> may change their code which may render your tricks ineffective
> >>
> >>> The problem is that we have 300 high schools with proxmox server.
> >>
> >> you mean you need to setup 300 license servers? omg ! 😂🙈  (i
> >> understand your problem then and would recommend talking to solidworks
> >> about that - otherwise i would bring that into public discussion, as
> >> solidworks makes you burn additional public money...)
> >>
> >>
> >>
> >>> Am 03.12.20 um 15:48 schrieb David Martin:
> >>> I try all solution who i found on internet.
> >>>
> >>> i 'm looking for solution to masquing hardware to deceive solidwork who
> >>> detecting proxmox.
> >>>
> >>>
> >>> Le jeu. 3 déc. 2020 à 15:45, David Martin <damart.vidin@gmail.com> a
> >> écrit :
> >>>
> >>>> Solidworks run only windows server
> >>>> i create windows 2016 server
> >>>> When solidworks 2020 starting install, he detecting who run on proxmox
> >> and
> >>>> solidworks not run on proxmox.
> >>>>
> >>>> Prerequis is :
> >>>> *Hyperviseurs (Environnements virtuels)*
> >>>>
> >>>>
> >>>> SOLIDWORKS *2018*
> >>>>
> >>>> SOLIDWORKS *2019*
> >>>> SOLIDWORKS *2020*
> >>>> VMware vSphere ESXi 6.0 6.5 6.7
> >>>> Station de travail VMware 9 14 15
> >>>> Microsoft Hyper-V 2012 2016 2019
> >>>> Parallels Desktop, Mac 10 14 14
> >>>> Citrix XenServer 6.2 7.4 7.6
> >>>> Not Proxmox...
> >>>>
> >>>> It's a big big problem for us
> >>>>
> >>>> Le jeu. 3 déc. 2020 à 15:23, Mark Adams via pve-user <
> >>>> pve-user@lists.proxmox.com> a écrit :
> >>>>
> >>>>>
> >>>>>
> >>>>> ---------- Forwarded message ----------
> >>>>> From: Mark Adams <mark@openvs.co.uk>
> >>>>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> >>>>> Cc:
> >>>>> Bcc:
> >>>>> Date: Thu, 3 Dec 2020 14:22:44 +0000
> >>>>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> >>>>> Why is it not working? Does it refuse to run when Windows is
> detecting
> >>>>> that
> >>>>> it is virtualised?
> >>>>>
> >>>>> On Thu, 3 Dec 2020 at 14:20, David Martin <damart.vidin@gmail.com>
> >> wrote:
> >>>>>
> >>>>>> Hi everybody,
> >>>>>> I have been trying for 3 weeks to install and find a solution to
> make
> >>>>>> solidworks 2020 license server work.
> >>>>>> Solidworks software refused to help us !
> >>>>>> The problem is that we have 300 high schools with proxmox server.
> >>>>>> anybody have found a solution to install and run solidworks server
> >>>>> license
> >>>>>> 2020 on proxmox 6.2 ?
> >>>>>>
> >>>>>> I need information if it's possible (on 6.2) to masquing all
> >> information
> >>>>>> hardware on vm, is it possible ?
> >>>>>> (i try different old solution who i found on google, but not work on
> >> PVE
> >>>>>> 6.2)
> >>>>>>
> >>>>>> ;-(
> >>>>>>
> >>>>>> Best regards
> >>>>>> --
> >>>>>> david martin
> >>>>>> _______________________________________________
> >>>>>> pve-user mailing list
> >>>>>> pve-user@lists.proxmox.com
> >>>>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>> ---------- Forwarded message ----------
> >>>>> From: Mark Adams via pve-user <pve-user@lists.proxmox.com>
> >>>>> To: Proxmox VE user list <pve-user@lists.proxmox.com>
> >>>>> Cc: Mark Adams <mark@openvs.co.uk>
> >>>>> Bcc:
> >>>>> Date: Thu, 3 Dec 2020 14:22:44 +0000
> >>>>> Subject: Re: [PVE-User] Solidworks 2020 refuse to help me
> >>>>> _______________________________________________
> >>>>> pve-user mailing list
> >>>>> pve-user@lists.proxmox.com
> >>>>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >>>>>
> >>>>
> >>>> --
> >>>> david martin
> >>>>
> >>>>
> >>
> >
> >
> > --
> > david martin
> > _______________________________________________
> > pve-user mailing list
> > pve-user@lists.proxmox.com
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>

Re: [PVE-User] Solidworks 2020 refuse to help me

[Yannis Milios]

Most license vendors restrict their license server use only for physical
servers, so a simple P2V won't help in this case. This might be the reason
that they are refusing to support you as well :)

In this case unfortunately you are limited using the license server on the
physical machine that it was licensed for.

Some vendors may provide the option to generate a different license that
can be used on a virtual server, you may have to consult them if such an
option is available.


Yannis

On Thu, 3 Dec 2020 at 14:19, David Martin <damart.vidin@gmail.com> wrote:

> Hi everybody,
> I have been trying for 3 weeks to install and find a solution to make
> solidworks 2020 license server work.
> Solidworks software refused to help us !
> The problem is that we have 300 high schools with proxmox server.
> anybody have found a solution to install and run solidworks server license
> 2020 on proxmox 6.2 ?
>
> I need information if it's possible (on 6.2) to masquing all information
> hardware on vm, is it possible ?
> (i try different old solution who i found on google, but not work on PVE
> 6.2)
>
> ;-(
>
> Best regards
> --
> david martin
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
> --
Sent from Gmail Mobile

Re: [PVE-User] Solidworks 2020 refuse to help me

[David Martin]

I don't use P2V
for the rest i know i know ....


Le jeu. 3 déc. 2020 à 15:47, Yannis Milios <yannis.milios@gmail.com> a
écrit :

> Most license vendors restrict their license server use only for physical
> servers, so a simple P2V won't help in this case. This might be the reason
> that they are refusing to support you as well :)
>
> In this case unfortunately you are limited using the license server on the
> physical machine that it was licensed for.
>
> Some vendors may provide the option to generate a different license that
> can be used on a virtual server, you may have to consult them if such an
> option is available.
>
>
> Yannis
>
> On Thu, 3 Dec 2020 at 14:19, David Martin <damart.vidin@gmail.com> wrote:
>
> > Hi everybody,
> > I have been trying for 3 weeks to install and find a solution to make
> > solidworks 2020 license server work.
> > Solidworks software refused to help us !
> > The problem is that we have 300 high schools with proxmox server.
> > anybody have found a solution to install and run solidworks server
> license
> > 2020 on proxmox 6.2 ?
> >
> > I need information if it's possible (on 6.2) to masquing all information
> > hardware on vm, is it possible ?
> > (i try different old solution who i found on google, but not work on PVE
> > 6.2)
> >
> > ;-(
> >
> > Best regards
> > --
> > david martin
> > _______________________________________________
> > pve-user mailing list
> > pve-user@lists.proxmox.com
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> >
> > --
> Sent from Gmail Mobile
> _______________________________________________
> pve-user mailing list
> pve-user@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>

-- 
david martin