* [PVE-User] promox hetzner install?
@ 2021-10-11 20:58 Wendell Hatcher
0 siblings, 0 replies; only message in thread
From: Wendell Hatcher @ 2021-10-11 20:58 UTC (permalink / raw)
To: pve-user
https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve
I am following the promox hetzner installation guide and my new linux
bridge keeps failing. It is stating it needs a virtual mac address per
hetzner as well as setup properly. It locks up my system each time what
am i doing wrong here?
# /etc/network/interfaces# /etc/network/interfaces
iface eno1 inet static
address 192.9.122.105/27
gateway 192.9.122.97
up route add -net 192.9.122.96 netmask 255.255.255.224 gw 192.9.122.97
dev eno1
# route 192.9.122.96/27 via 192.9.122.97
#auto vmbr0
#iface vmbr0 inet static
# address 10.10.10.2/24
# hwaddress 00:50:56:00:88:1E # MAC address of the NIC, required since
Proxmox 7.0
# netmask 255.255.255.254
# bridge-ports eno1
# bridge-stp off
# bridge-fd 0
# bridge-vlan-aware yes
# bridge-vids 2-4094
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-10-11 20:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-11 20:58 [PVE-User] promox hetzner install? Wendell Hatcher
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox