public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
* [pve-devel] [PATCH storage v2] fix #957 iscsi: improve check_connection logic
@ 2025-03-08 15:52 Victor Seva via pve-devel
  2025-03-11 14:35 ` Mira Limbeck
  0 siblings, 1 reply; 2+ messages in thread
From: Victor Seva via pve-devel @ 2025-03-08 15:52 UTC (permalink / raw)
  To: pve-devel; +Cc: Victor Seva

[-- Attachment #1: Type: message/rfc822, Size: 5986 bytes --]

From: Victor Seva <linuxmaniac@torreviejawireless.org>
To: pve-devel@lists.proxmox.com
Subject: [PATCH storage v2] fix #957 iscsi: improve check_connection logic
Date: Sat,  8 Mar 2025 16:52:29 +0100
Message-ID: <20250308155229.968380-1-linuxmaniac@torreviejawireless.org>

don't check tcp connection directly if there are already
sessions. Use iscsiadm command to check the sessions
status instead.

pvestatd is calling check_connection every 10 seconds.
This check produces a lot of noise at the iscsi server logging.

Signed-off-by: Victor Seva <linuxmaniac@torreviejawireless.org>
---
 src/PVE/Storage/ISCSIPlugin.pm | 42 ++++++++++++++++++++++++++++++----
 1 file changed, 37 insertions(+), 5 deletions(-)

diff --git a/src/PVE/Storage/ISCSIPlugin.pm b/src/PVE/Storage/ISCSIPlugin.pm
index eb70453..bcc281b 100644
--- a/src/PVE/Storage/ISCSIPlugin.pm
+++ b/src/PVE/Storage/ISCSIPlugin.pm
@@ -66,6 +66,25 @@ sub iscsi_test_portal {
     return PVE::Network::tcp_ping($server, $port || 3260, 2);
 }
 
+sub iscsi_test_session {
+    my ($sid) = @_;
+    my $cmd = [$ISCSIADM, '--mode', 'session', '--sid', $sid, '-P1'];
+
+    my $res = 0;
+    eval {
+        run_command($cmd, errmsg => 'iscsi session test failed', outfunc => sub {
+            my $line = shift;
+            if ($line =~ m/^\s+iSCSI Session State: LOGGED_IN\s*$/) {
+                $res = 1;
+            }
+        });
+    };
+    if (my $err = $@) {
+        die $err;
+    };
+    return $res;
+}
+
 sub iscsi_portals {
     my ($target, $portal_in) = @_;
 
@@ -560,11 +579,24 @@ sub activate_volume {
 sub check_connection {
     my ($class, $storeid, $scfg) = @_;
 
-    my $portals = iscsi_portals($scfg->{target}, $scfg->{portal});
-
-    for my $portal (@$portals) {
-	my $result = iscsi_test_portal($portal);
-	return $result if $result;
+    my $cache = {};
+    my $sessions = [];
+    eval {
+        $sessions = iscsi_session($cache, $scfg->{target});
+    };
+    if (my $err = $@) {
+        # no sessions, check portal via tcp
+        my $portals = iscsi_portals($scfg->{target}, $scfg->{portal});
+        for my $portal (@$portals) {
+            my $result = iscsi_test_portal($portal);
+            return $result if $result;
+        }
+        return 0;
+    }
+    # we have sessions, let's test them instead
+    for my $session (@$sessions) {
+        my $result = iscsi_test_session($session->{session_id});
+        return $result if $result;
     }
 
     return 0;
-- 
2.43.0



[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [pve-devel] [PATCH storage v2] fix #957 iscsi: improve check_connection logic
  2025-03-08 15:52 [pve-devel] [PATCH storage v2] fix #957 iscsi: improve check_connection logic Victor Seva via pve-devel
@ 2025-03-11 14:35 ` Mira Limbeck
  0 siblings, 0 replies; 2+ messages in thread
From: Mira Limbeck @ 2025-03-11 14:35 UTC (permalink / raw)
  To: pve-devel

Thank you for the v2!

some comments inline
> +sub iscsi_test_session {
> +    my ($sid) = @_;
> +    my $cmd = [$ISCSIADM, '--mode', 'session', '--sid', $sid, '-P1'];
> +
> +    my $res = 0;
> +    eval {
> +        run_command($cmd, errmsg => 'iscsi session test failed', outfunc => sub {
> +            my $line = shift;
> +            if ($line =~ m/^\s+iSCSI Session State: LOGGED_IN\s*$/) {
> +                $res = 1;
> +            }
> +        });
> +    };
> +    if (my $err = $@) {
> +        die $err;
> +    };
This can be written as just `die "$@\n" if $@` instead.
It should contain some additional info though, for example:
`die "session check failed: $@\n" if $@;`

> +    return $res;
> +}
> +
>  sub iscsi_portals {
>      my ($target, $portal_in) = @_;
>  
> @@ -560,11 +579,24 @@ sub activate_volume {
>  sub check_connection {
>      my ($class, $storeid, $scfg) = @_;
>  
> -    my $portals = iscsi_portals($scfg->{target}, $scfg->{portal});
> -
> -    for my $portal (@$portals) {
> -	my $result = iscsi_test_portal($portal);
> -	return $result if $result;
> +    my $cache = {};
> +    my $sessions = [];
> +    eval {
> +        $sessions = iscsi_session($cache, $scfg->{target});
> +    };
iscsi_session only dies if the `iscsiadm` command fails or prints
something other than `: No active sessions.`. See the `!~` check in
iscsi_session_list.

> +    if (my $err = $@) {
This will not be the case when there are no sessions, but when the
iscsiadm command fails. See above.

> +        # no sessions, check portal via tcp
> +        my $portals = iscsi_portals($scfg->{target}, $scfg->{portal});
> +        for my $portal (@$portals) {
> +            my $result = iscsi_test_portal($portal);
> +            return $result if $result;
> +        }
> +        return 0;
> +    }
> +    # we have sessions, let's test them instead
> +    for my $session (@$sessions) {
> +        my $result = iscsi_test_session($session->{session_id});
> +        return $result if $result;
>      }
>  
>      return 0;
You could do something like this:
```
    my $cache = {};
    my $sessions = iscsi_session($cache, $scfg->{target});
    my $portals = iscsi_portals($scfg->{target}, $scfg->{portal});
    for my $portal ($portals->@*) {
	my $session_exists = 0;
    	for my $session ($sessions->@*) {
	    next if $session->{portal} ne $portal;
	    $session_exists = 1;

	    my $result = iscsi_test_session($session->{session_id});
	    return $result if $result;
	}
	next if $session_exists;

	my $result = iscsi_test_portal($portal);
	return $result if $result;
    }
```
This goes through all portals, and if a session exists for the portal,
does a session test instead of the tcp_ping.
But if no session exists, it still checks with a tcp_ping to see if we
should login or not.


_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2025-03-11 14:36 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-03-08 15:52 [pve-devel] [PATCH storage v2] fix #957 iscsi: improve check_connection logic Victor Seva via pve-devel
2025-03-11 14:35 ` Mira Limbeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal