Re: [pve-devel] [RFC PATCH docs-common 01/13] installation-media: move page from pve-docs here

[Aaron Lauterer <a.lauterer@proxmox.com>]

On  2024-04-19  11:05, Christoph Heiss wrote:
> Small adaptions were necessary; mostly a s/{pve}/{product}/g and
> replacing the ISO URL with the {iso-url} variable.

except there are still plenty of `{pve}`s in there?

another thing looking at this patch, how do we handle product specifics?
having a ton of variables that are set according to the product, might 
be cumbersome.

Most likely something like `ifdef:product-pve` and so forth would be useful.

some situations I spotted where we would probably need it in this 
patched marked below:

> 
> Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
> ---
>   installation-media.adoc | 132 ++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 132 insertions(+)
>   create mode 100644 installation-media.adoc
> 
> diff --git a/installation-media.adoc b/installation-media.adoc
> new file mode 100644
> index 0000000..a1c9402
> --- /dev/null
> +++ b/installation-media.adoc
> @@ -0,0 +1,132 @@
> +[[installation_prepare_media]]
> +Prepare Installation Media
> +--------------------------
> +ifdef::wiki[]
> +:pve-toplevel:
> +endif::wiki[]
> +
> +Download the installer ISO image from: {website}en/downloads/proxmox-virtual-environment/iso

^actual download link for each product

> +
> +The {pve} installation media is a hybrid ISO image. It works in two ways:
> +
> +* An ISO image file ready to burn to a CD or DVD.
> +
> +* A raw sector (IMG) image file ready to copy to a USB flash drive (USB stick).
> +
> +Using a USB flash drive to install {pve} is the recommended way because it is
> +the faster option.
> +
> +Prepare a USB Flash Drive as Installation Medium
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +The flash drive needs to have at least 1 GB of storage available.
> +
> +NOTE: Do not use UNetbootin. It does not work with the {pve} installation image.
> +
> +IMPORTANT: Make sure that the USB flash drive is not mounted and does not
> +contain any important data.
> +
> +
> +Instructions for GNU/Linux
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +On Unix-like operating system use the `dd` command to copy the ISO image to the
> +USB flash drive. First find the correct device name of the USB flash drive (see
> +below). Then run the `dd` command.
> +
> +----
> +# dd bs=1M conv=fdatasync if=./proxmox-ve_*.iso of=/dev/XYZ

^ useful example, though this one could also be helped with by putting 
the 've_' part into the glob as well
> +----
> +
> +NOTE: Be sure to replace /dev/XYZ with the correct device name and adapt the
> +input filename ('if') path.
> +
> +CAUTION: Be very careful, and do not overwrite the wrong disk!
> +
> +
> +Find the Correct USB Device Name
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> +There are two ways to find out the name of the USB flash drive. The first one is
> +to compare the last lines of the `dmesg` command output before and after
> +plugging in the flash drive. The second way is to compare the output of the
> +`lsblk` command. Open a terminal and run:
> +
> +----
> +# lsblk
> +----
> +
> +Then plug in your USB flash drive and run the command again:
> +
> +----
> +# lsblk
> +----
> +
> +A new device will appear. This is the one you want to use. To be on the extra
> +safe side check if the reported size matches your USB flash drive.
> +
> +
> +Instructions for macOS
> +~~~~~~~~~~~~~~~~~~~~~~
> +
> +Open the terminal (query Terminal in Spotlight).
> +
> +Convert the `.iso` file to `.dmg` format using the convert option of `hdiutil`,
> +for example:
> +
> +----
> +# hdiutil convert proxmox-ve_*.iso -format UDRW -o proxmox-ve_*.dmg
> +----
> +
> +TIP: macOS tends to automatically add '.dmg' to the output file name.
> +
> +To get the current list of devices run the command:
> +
> +----
> +# diskutil list
> +----
> +
> +Now insert the USB flash drive and run this command again to determine which
> +device node has been assigned to it. (e.g., /dev/diskX).
> +
> +----
> +# diskutil list
> +# diskutil unmountDisk /dev/diskX
> +----
> +
> +NOTE: replace X with the disk number from the last command.
> +
> +----
> +# sudo dd if=proxmox-ve_*.dmg bs=1M of=/dev/rdiskX
> +----
> +
> +NOTE: 'rdiskX', instead of 'diskX', in the last command is intended. It will
> +increase the write speed.
> +
> +Instructions for Windows
> +~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Using Etcher
> +^^^^^^^^^^^^
> +
> +Etcher works out of the box. Download Etcher from https://etcher.io. It will
> +guide you through the process of selecting the ISO and your USB flash drive.
> +
> +Using Rufus
> +^^^^^^^^^^^
> +
> +Rufus is a more lightweight alternative, but you need to use the *DD mode* to
> +make it work. Download Rufus from https://rufus.ie/. Either install it or use
> +the portable version. Select the destination drive and the {pve} ISO file.
> +
> +IMPORTANT: Once you 'Start' you have to click 'No' on the dialog asking to
> +download a different version of GRUB. In the next dialog select the 'DD' mode.
> +
> +ifdef::wiki[]
> +Boot your Server from the USB Flash Drive
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Connect the USB flash drive to your server and make sure that booting from USB
> +is enabled (check your servers firmware settings). Then follow the steps in the
> +xref:chapter_installation[installation wizard].

Aligning chapter references will also be some work, especially if we 
want to keep old direct links still working.

> +
> +endif::wiki[]
> --
> 2.44.0
> 
> 
> 
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
> 
> 


_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel