From: Hannes Laimer <h.laimer@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: superseded: [PATCH docs/manager/network/proxmox{-perl-rs,-ve-rs} v4 0/9] add IPv6 RA / SLAAC support to EVPN zones
Date: Thu, 29 Oct 2026 16:42:45 +0100 [thread overview]
Message-ID: <e4f3cdb8-5d3e-49f2-ac4a-4549afad42ff@proxmox.com> (raw)
In-Reply-To: <20261029144408.2646288-1-h.laimer@proxmox.com>
superseded-by:
https://lore.proxmox.com/pve-devel/20261029154148.2882594-1-h.laimer@proxmox.com/
(sorry for the noise)
On 2026-10-29 15:44, Hannes Laimer wrote:
> This series adds IPv6 Router Advertisement / SLAAC support to EVPN zones.
>
> RA settings sit on the vnet (`vnets.cfg`), per-prefix overrides on the subnet
> (`subnets.cfg`). Defaults are chosen so that most IPv6 subnets work without
> explicit per-prefix configuration.
>
> It also sets `accept_untracked_na=2` on every EVPN vnet bridge that has
> an IPv6 subnet, to keep first-packet IPv6 return traffic reliable in the
> distributed anycast-gateway topology. The commit contains more details.
>
> v4:
> - rebased onto current master
> - docs rewritten
> - corrected router lifetime default placeholder
> - reorder commits
>
> v3, thanks @Lukas S!:
> - validation no longer rejects valid IPv6 subnets: non-/64 prefixes and IPv6
> subnets using SNAT are accepted and editable again
> - improve FRR config generation so a single malformed subnet or a non-member
> node can no longer break it, and so configured prefix lifetimes are no
> longer silently dropped
> - cleaner EVPN gating and better per-prefix defaults, so most IPv6 subnets
> work without explicit configuration
> - cleanup UI, only persists meaningful settings
> - some smaller fixups
>
>
> proxmox-perl-rs:
>
> Hannes Laimer (1):
> pve-rs: sdn: add IPv6 RA builder binding
>
> pve-rs/Makefile | 1 +
> pve-rs/src/bindings/sdn/ipv6_ra.rs | 40 ++++++++++++++++++++++++++++++
> pve-rs/src/bindings/sdn/mod.rs | 1 +
> 3 files changed, 42 insertions(+)
> create mode 100644 pve-rs/src/bindings/sdn/ipv6_ra.rs
>
>
> proxmox-ve-rs:
>
> Hannes Laimer (2):
> frr: add IPv6 router advertisement support
> ve-config: sdn: add IPv6 router advertisement settings
>
> .../templates/frr.conf.jinja | 1 +
> .../templates/nd_interfaces.jinja | 28 +++
> proxmox-frr/src/ser/mod.rs | 6 +
> proxmox-frr/src/ser/nd.rs | 56 ++++++
> proxmox-frr/src/ser/serializer.rs | 6 +-
> proxmox-ve-config/src/sdn/config.rs | 146 +++++++++++++++-
> proxmox-ve-config/src/sdn/mod.rs | 1 +
> proxmox-ve-config/src/sdn/nd.rs | 131 ++++++++++++++
> proxmox-ve-config/tests/nd/main.rs | 164 ++++++++++++++++++
> .../nd__explicit_lifetimes_are_preserved.snap | 9 +
> .../nd__mixed_subnets_under_one_vnet.snap | 14 ++
> .../snapshots/nd__no_autoconfig_prefix.snap | 9 +
> ...sh64_prefix_defaults_to_no_autoconfig.snap | 9 +
> .../nd__off_link_emits_off_link_modifier.snap | 9 +
> ...__preferred_lifetime_clamped_to_valid.snap | 9 +
> ...vel_optional_knobs_are_passed_through.snap | 12 ++
> .../nd__slaac_with_default_lifetimes.snap | 9 +
> 17 files changed, 611 insertions(+), 8 deletions(-)
> create mode 100644 proxmox-frr-templates/templates/nd_interfaces.jinja
> create mode 100644 proxmox-frr/src/ser/nd.rs
> create mode 100644 proxmox-ve-config/src/sdn/nd.rs
> create mode 100644 proxmox-ve-config/tests/nd/main.rs
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__explicit_lifetimes_are_preserved.snap
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__mixed_subnets_under_one_vnet.snap
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__no_autoconfig_prefix.snap
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__non_slash64_prefix_defaults_to_no_autoconfig.snap
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__off_link_emits_off_link_modifier.snap
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__preferred_lifetime_clamped_to_valid.snap
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__ra_level_optional_knobs_are_passed_through.snap
> create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__slaac_with_default_lifetimes.snap
>
>
> pve-manager:
>
> Hannes Laimer (1):
> ui: sdn: add IPv6 RA / SLAAC support
>
> www/manager6/form/SDNVnetSelector.js | 2 +-
> www/manager6/sdn/SubnetEdit.js | 130 ++++++++++++++++-
> www/manager6/sdn/SubnetView.js | 7 +-
> www/manager6/sdn/VnetEdit.js | 202 ++++++++++++++++++++++++++-
> www/manager6/sdn/VnetView.js | 6 +-
> 5 files changed, 339 insertions(+), 8 deletions(-)
>
>
> pve-network:
>
> Hannes Laimer (4):
> sdn: evpn: derive IP version from CIDR for gateway-less subnets
> sdn: evpn: accept untracked IPv6 neighbor advertisements
> sdn: evpn: add IPv6 RA / SLAAC support
> api: vnets: include the zone type in the vnet list
>
> src/PVE/API2/Network/SDN/Vnets.pm | 62 ++++++++++++++
> src/PVE/Network/SDN.pm | 1 +
> src/PVE/Network/SDN/Controllers.pm | 21 ++++-
> src/PVE/Network/SDN/Controllers/EvpnPlugin.pm | 22 ++++-
> src/PVE/Network/SDN/Controllers/Plugin.pm | 2 +-
> src/PVE/Network/SDN/SubnetPlugin.pm | 64 ++++++++++++++
> src/PVE/Network/SDN/VnetPlugin.pm | 85 +++++++++++++++++++
> src/PVE/Network/SDN/Zones/EvpnPlugin.pm | 14 ++-
> src/PVE/Network/SDN/Zones/Plugin.pm | 6 ++
> .../expected_sdn_interfaces | 1 +
> .../exitnode_snat/expected_sdn_interfaces | 1 +
> .../exitnodenullroute/expected_sdn_interfaces | 1 +
> .../evpn/ipv4ipv6/expected_sdn_interfaces | 1 +
> .../ipv4ipv6nogateway/expected_sdn_interfaces | 1 +
> .../zones/evpn/ipv6/expected_sdn_interfaces | 1 +
> .../evpn/ipv6underlay/expected_sdn_interfaces | 1 +
> .../evpn/slaac/expected_controller_config | 53 ++++++++++++
> .../zones/evpn/slaac/expected_sdn_interfaces | 44 ++++++++++
> src/test/zones/evpn/slaac/interfaces | 7 ++
> src/test/zones/evpn/slaac/sdn_config | 41 +++++++++
> 20 files changed, 423 insertions(+), 6 deletions(-)
> create mode 100644 src/test/zones/evpn/slaac/expected_controller_config
> create mode 100644 src/test/zones/evpn/slaac/expected_sdn_interfaces
> create mode 100644 src/test/zones/evpn/slaac/interfaces
> create mode 100644 src/test/zones/evpn/slaac/sdn_config
>
>
> pve-docs:
>
> Hannes Laimer (1):
> sdn: add IPv6 RA / SLAAC section
>
> pvesdn.adoc | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
>
>
> Summary over all repositories:
> 46 files changed, 1486 insertions(+), 22 deletions(-)
>
prev parent reply other threads:[~2026-10-29 15:43 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-29 14:43 [PATCH docs/manager/network/proxmox{-perl-rs,-ve-rs} v4 0/9] add IPv6 RA / SLAAC support to EVPN zones Hannes Laimer
2026-10-29 14:44 ` [PATCH proxmox-perl-rs v4 1/9] pve-rs: sdn: add IPv6 RA builder binding Hannes Laimer
2026-10-29 14:44 ` [PATCH proxmox-ve-rs v4 2/9] frr: add IPv6 router advertisement support Hannes Laimer
2026-10-29 14:44 ` [PATCH proxmox-ve-rs v4 3/9] ve-config: sdn: add IPv6 router advertisement settings Hannes Laimer
2026-10-29 14:44 ` [PATCH pve-manager v4 4/9] ui: sdn: add IPv6 RA / SLAAC support Hannes Laimer
2026-10-29 14:44 ` [PATCH pve-network v4 5/9] sdn: evpn: derive IP version from CIDR for gateway-less subnets Hannes Laimer
2026-10-29 14:44 ` [PATCH pve-network v4 6/9] sdn: evpn: accept untracked IPv6 neighbor advertisements Hannes Laimer
2026-10-29 14:44 ` [PATCH pve-network v4 7/9] sdn: evpn: add IPv6 RA / SLAAC support Hannes Laimer
2026-10-29 14:44 ` [PATCH pve-network v4 8/9] api: vnets: include the zone type in the vnet list Hannes Laimer
2026-10-29 14:44 ` [PATCH pve-docs v4 9/9] sdn: add IPv6 RA / SLAAC section Hannes Laimer
2026-10-29 15:42 ` Hannes Laimer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e4f3cdb8-5d3e-49f2-ac4a-4549afad42ff@proxmox.com \
--to=h.laimer@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox