* Re: [pve-devel] [PATCH v5 storage 1/1] fix #254: iscsi: add support for multipath iscsi targets
[not found] ` <20231023174508.385682-2-ykonotopov@gnome.org>
@ 2023-10-25 13:45 ` Dominik Csapak
2023-10-27 11:47 ` [pve-devel] applied: " Thomas Lamprecht
1 sibling, 0 replies; 2+ messages in thread
From: Dominik Csapak @ 2023-10-25 13:45 UTC (permalink / raw)
To: Yuri Konotopov, pve-devel
One nit inline, but that could be fixed up when applying too probably?
Also, and that was previously also the case, if the first (or any) portal is not
reachable, we get a big warning about iscsiadm --login not being able to login
every 10 seconds in pvestatd. It's nothing your patch changes, but now it also
can happen when the storage works, making it more unlikely that the admin will
check the logs for an error.
We could extend the storage status from a simple binary result to an enum/list
with e.g. ok/warning/fail and that could be shown in the ui for such cases.
(Again, this has nothing directly to do with your patch, i just wanted to
mention it, since this change emphasizes the need for it IMO)
Otherwise consider this patch:
Reviewed-By: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Dominik Csapak <d.csapak@proxmox.com>
On 10/23/23 19:45, Yuri Konotopov wrote:
> With this patch Proxmox now tries to login to all discovered portals in
> case some of them are not logged yet.
> In case of multipath configuration when initially configured portal is
> missing for some reason Proxmox don't lose iscsi storage now and can
> succesfully restore iscsi connection between reboots.
>
> Signed-off-by: Yuri Konotopov <ykonotopov@gnome.org>
> ---
> src/PVE/Storage.pm | 2 +-
> src/PVE/Storage/ISCSIPlugin.pm | 117 +++++++++++++++++++++++++--------
> 2 files changed, 89 insertions(+), 30 deletions(-)
>
> diff --git a/src/PVE/Storage.pm b/src/PVE/Storage.pm
> index a4d85e1..ec5f5bd 100755
> --- a/src/PVE/Storage.pm
> +++ b/src/PVE/Storage.pm
> @@ -1432,7 +1432,7 @@ sub scan_iscsi {
> die "unable to parse/resolve portal address '${portal_in}'\n";
> }
>
> - return PVE::Storage::ISCSIPlugin::iscsi_discovery($portal);
> + return PVE::Storage::ISCSIPlugin::iscsi_discovery([ $portal ]);
> }
>
> sub storage_default_format {
> diff --git a/src/PVE/Storage/ISCSIPlugin.pm b/src/PVE/Storage/ISCSIPlugin.pm
> index a79fcb0..b4ab1dd 100644
> --- a/src/PVE/Storage/ISCSIPlugin.pm
> +++ b/src/PVE/Storage/ISCSIPlugin.pm
> @@ -18,6 +18,9 @@ use base qw(PVE::Storage::Plugin);
> my $ISCSIADM = '/usr/bin/iscsiadm';
> $ISCSIADM = undef if ! -X $ISCSIADM;
>
> +# Example: 192.168.122.252:3260,1 iqn.2003-01.org.linux-iscsi.proxmox-nfs.x8664:sn.00567885ba8f
> +my $ISCSI_TARGET_RE = qr/^((?:$IPV4RE|\[$IPV6RE\]):\d+)\,\S+\s+(\S+)\s*$/;
> +
> sub check_iscsi_support {
> my $noerr = shift;
>
> @@ -45,11 +48,12 @@ sub iscsi_session_list {
> eval {
> run_command($cmd, errmsg => 'iscsi session scan failed', outfunc => sub {
> my $line = shift;
> -
> - if ($line =~ m/^tcp:\s+\[(\S+)\]\s+\S+\s+(\S+)(\s+\S+)?\s*$/) {
> - my ($session, $target) = ($1, $2);
> + # example: tcp: [1] 192.168.122.252:3260,1 iqn.2003-01.org.linux-iscsi.proxmox-nfs.x8664:sn.00567885ba8f (non-flash)
> + if ($line =~ m/^tcp:\s+\[(\S+)\]\s+((?:$IPV4RE|\[$IPV6RE\]):\d+)\,\S+\s+(\S+)\s+\S+?\s*$/) {
> + my ($session_id, $portal, $target) = ($1, $2, $3);
> # there can be several sessions per target (multipath)
> - push @{$res->{$target}}, $session;
> + my %session = ( session_id => $session_id, portal => $portal );
> + push @{$res->{$target}}, \%session;
nit: since you don't need the hash afterwards anymore, you could inline that with:
---
push @${res->{$target}}, { session_id => $session_id, portal => $portal };
---
bot no hard feelings for that, and could potentially be fixed up.
> }
> });
> };
> @@ -68,42 +72,77 @@ sub iscsi_test_portal {
> return PVE::Network::tcp_ping($server, $port || 3260, 2);
> }
>
> -sub iscsi_discovery {
> - my ($portal) = @_;
> +sub iscsi_portals {
> + my ($target, $portal_in) = @_;
>
> check_iscsi_support ();
>
> - my $res = {};
> - return $res if !iscsi_test_portal($portal); # fixme: raise exception here?
> + my $res = [];
> + my $cmd = [$ISCSIADM, '--mode', 'node'];
> + eval {
> + run_command($cmd, outfunc => sub {
> + my $line = shift;
>
> - my $cmd = [$ISCSIADM, '--mode', 'discovery', '--type', 'sendtargets', '--portal', $portal];
> - run_command($cmd, outfunc => sub {
> - my $line = shift;
> + if ($line =~ $ISCSI_TARGET_RE) {
> + my ($portal, $portal_target) = ($1, $2);
> + if ($portal_target eq $target) {
> + push @{$res}, $portal;
> + }
> + }
> + });
> + };
>
> - if ($line =~ m/^((?:$IPV4RE|\[$IPV6RE\]):\d+)\,\S+\s+(\S+)\s*$/) {
> - my $portal = $1;
> - my $target = $2;
> - # one target can have more than one portal (multipath).
> - push @{$res->{$target}}, $portal;
> - }
> - });
> + if ($@) {
> + warn $@;
> + return [ $portal_in ];
> + }
> +
> + return $res;
> +}
> +
> +sub iscsi_discovery {
> + my ($portals) = @_;
> +
> + check_iscsi_support ();
> +
> + my $res = {};
> + for my $portal ($portals->@*) {
> + next if !iscsi_test_portal($portal); # fixme: raise exception here?
> +
> + my $cmd = [$ISCSIADM, '--mode', 'discovery', '--type', 'sendtargets', '--portal', $portal];
> + eval {
> + run_command($cmd, outfunc => sub {
> + my $line = shift;
> +
> + if ($line =~ $ISCSI_TARGET_RE) {
> + my ($portal, $target) = ($1, $2);
> + # one target can have more than one portal (multipath)
> + # and sendtargets should return all of them in single call
> + push @{$res->{$target}}, $portal;
> + }
> + });
> + };
> +
> + # In case of multipath we can stop after receiving targets from any available portal
> + last if scalar(keys %$res) > 0;
> + }
>
> return $res;
> }
>
> sub iscsi_login {
> - my ($target, $portal_in) = @_;
> + my ($target, $portals) = @_;
>
> check_iscsi_support();
>
> - eval { iscsi_discovery($portal_in); };
> + eval { iscsi_discovery($portals); };
> warn $@ if $@;
>
> run_command([$ISCSIADM, '--mode', 'node', '--targetname', $target, '--login']);
> }
>
> sub iscsi_logout {
> - my ($target, $portal) = @_;
> + my ($target) = @_;
>
> check_iscsi_support();
>
> @@ -133,7 +172,7 @@ sub iscsi_session_rescan {
> }
>
> foreach my $session (@$session_list) {
> - my $cmd = [$ISCSIADM, '--mode', 'session', '--sid', $session, '--rescan'];
> + my $cmd = [$ISCSIADM, '--mode', 'session', '--sid', $session->{session_id}, '--rescan'];
> eval { run_command($cmd, outfunc => sub {}); };
> warn $@ if $@;
> }
> @@ -379,14 +418,28 @@ sub activate_storage {
>
> return if !check_iscsi_support(1);
>
> - my $session = iscsi_session($cache, $scfg->{target});
> + my $sessions = iscsi_session($cache, $scfg->{target});
> + my $portals = iscsi_portals($scfg->{target}, $scfg->{portal});
> + my $do_login = !defined($sessions);
>
> - if (!defined ($session)) {
> - eval { iscsi_login($scfg->{target}, $scfg->{portal}); };
> + if (!$do_login) {
> + # We should check that sessions for all portals are available
> + my $session_portals = [ map { $_->{portal} } (@$sessions) ];
> +
> + for my $portal (@$portals) {
> + if (!grep(/^\Q$portal\E$/, @$session_portals)) {
> + $do_login = 1;
> + last;
> + }
> + }
> + }
> +
> + if ($do_login) {
> + eval { iscsi_login($scfg->{target}, $portals); };
> warn $@ if $@;
> } else {
> # make sure we get all devices
> - iscsi_session_rescan($session);
> + iscsi_session_rescan($sessions);
> }
> }
>
> @@ -396,15 +449,21 @@ sub deactivate_storage {
> return if !check_iscsi_support(1);
>
> if (defined(iscsi_session($cache, $scfg->{target}))) {
> - iscsi_logout($scfg->{target}, $scfg->{portal});
> + iscsi_logout($scfg->{target});
> }
> }
>
> sub check_connection {
> my ($class, $storeid, $scfg) = @_;
>
> - my $portal = $scfg->{portal};
> - return iscsi_test_portal($portal);
> + my $portals = iscsi_portals($scfg->{target}, $scfg->{portal});
> +
> + for my $portal (@$portals) {
> + my $result = iscsi_test_portal($portal);
> + return $result if $result;
> + }
> +
> + return 0;
> }
>
> sub volume_resize {
^ permalink raw reply [flat|nested] 2+ messages in thread