From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: Proxmox VE development discussion <pve-devel@lists.proxmox.com>,
Lorenz Stechauner <l.stechauner@proxmox.com>
Subject: Re: [pve-devel] [PATCH storage 1/2] pvesm: reformat cmd definitions
Date: Mon, 27 Sep 2021 14:36:43 +0200 [thread overview]
Message-ID: <cbfd8cb0-35c8-6896-b2b9-7e7ba61b6d2d@proxmox.com> (raw)
In-Reply-To: <20210927070917.1504165-1-l.stechauner@proxmox.com>
On 27.09.21 09:09, Lorenz Stechauner wrote:
> Signed-off-by: Lorenz Stechauner <l.stechauner@proxmox.com>
> ---
> PVE/CLI/pvesm.pm | 343 ++++++++++++++++++++++++++++++-----------------
> 1 file changed, 223 insertions(+), 120 deletions(-)
>
> diff --git a/PVE/CLI/pvesm.pm b/PVE/CLI/pvesm.pm
> index 190de91..7afbe22 100755
> --- a/PVE/CLI/pvesm.pm
> +++ b/PVE/CLI/pvesm.pm
> @@ -574,76 +574,143 @@ my $print_api_result = sub {
> };
>
> our $cmddef = {
> - add => [ "PVE::API2::Storage::Config", 'create', ['type', 'storage'] ],
above is <= 100 and even <= 80 cc, and we want to avoid line bloat in general,
as while overly long lines are not ideal, splitting basically on a per-word basis
isn't either.
It's totally fine in an hash/map definition to have some lines single ones and
some not.
> - set => [ "PVE::API2::Storage::Config", 'update', ['storage'] ],
same
> - remove => [ "PVE::API2::Storage::Config", 'delete', ['storage'] ],
same
> - status => [ "PVE::API2::Storage::Status", 'index', [],
same (but would need to use the <= 100 cc limit, which is fine here.
> - { node => $nodename }, $print_status ],
> - list => [ "PVE::API2::Storage::Content", 'index', ['storage'],
fwiw, we could have a `my $API = 'PVE::API2::Storage::';` before the cmddef and
use string interpolation, e.g.:
list => [ "${API}::Content", 'index', ['storage'], { node => $nodename }, $print_content ],
no hard feelings, but given that there's a lot of API module-path repetition and
it adds quite a bit to the line length it could be worth it..
> - { node => $nodename }, $print_content ],
> - alloc => [ "PVE::API2::Storage::Content", 'create', ['storage', 'vmid', 'filename', 'size'],
> - { node => $nodename }, sub {
> - my $volid = shift;
> - print "successfully created '$volid'\n";
> - }],
> - free => [ "PVE::API2::Storage::Content", 'delete', ['volume'],
> - { node => $nodename } ],
> + add => [
> + "PVE::API2::Storage::Config",
> + 'create',
> + ['type', 'storage'],
> + ],
> + set => [
> + "PVE::API2::Storage::Config",
> + 'update',
> + ['storage'],
> + ],
> + remove => [
> + "PVE::API2::Storage::Config",
> + 'delete',
> + ['storage'],
> + ],
> + status => [
> + "PVE::API2::Storage::Status",
> + 'index',
> + [],
> + { node => $nodename },
> + $print_status,
> + ],
> + list => [
> + "PVE::API2::Storage::Content",
> + 'index',
> + ['storage'],
> + { node => $nodename },
> + $print_content,
> + ],
> + alloc => [
> + "PVE::API2::Storage::Content",
> + 'create',
> + ['storage', 'vmid', 'filename', 'size'],
> + { node => $nodename },
> + sub {
> + my $volid = shift;
> + print "successfully created '$volid'\n";
> + },
> + ],
> + free => [
> + "PVE::API2::Storage::Content",
> + 'delete',
> + ['volume'],
> + { node => $nodename },
> + ],
> scan => {
> - nfs => [ "PVE::API2::Storage::Scan", 'nfsscan', ['server'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - my $maxlen = 0;
> - foreach my $rec (@$res) {
> - my $len = length ($rec->{path});
> - $maxlen = $len if $len > $maxlen;
> - }
> - foreach my $rec (@$res) {
> - printf "%-${maxlen}s %s\n", $rec->{path}, $rec->{options};
> - }
> - }],
> - cifs => [ "PVE::API2::Storage::Scan", 'cifsscan', ['server'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - my $maxlen = 0;
> - foreach my $rec (@$res) {
> - my $len = length ($rec->{share});
> - $maxlen = $len if $len > $maxlen;
> - }
> - foreach my $rec (@$res) {
> - printf "%-${maxlen}s %s\n", $rec->{share}, $rec->{description};
> - }
> - }],
> - glusterfs => [ "PVE::API2::Storage::Scan", 'glusterfsscan', ['server'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - foreach my $rec (@$res) {
> - printf "%s\n", $rec->{volname};
> - }
> - }],
> - iscsi => [ "PVE::API2::Storage::Scan", 'iscsiscan', ['portal'], { node => $nodename }, sub {
> - my $res = shift;
> + nfs => [
> + "PVE::API2::Storage::Scan",
> + 'nfsscan',
> + ['server'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> +
> + my $maxlen = 0;
> + foreach my $rec (@$res) {
> + my $len = length ($rec->{path});
> + $maxlen = $len if $len > $maxlen;
> + }
> + foreach my $rec (@$res) {
> + printf "%-${maxlen}s %s\n", $rec->{path}, $rec->{options};
> + }
> + },
> + ],
> + cifs => [
> + "PVE::API2::Storage::Scan",
> + 'cifsscan',
> + ['server'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> +
> + my $maxlen = 0;
> + foreach my $rec (@$res) {
> + my $len = length ($rec->{share});
> + $maxlen = $len if $len > $maxlen;
> + }
> + foreach my $rec (@$res) {
> + printf "%-${maxlen}s %s\n", $rec->{share}, $rec->{description};
> + }
> + },
> + ],
> + glusterfs => [
> + "PVE::API2::Storage::Scan",
> + 'glusterfsscan',
> + ['server'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
>
> - my $maxlen = 0;
> - foreach my $rec (@$res) {
> - my $len = length ($rec->{target});
> - $maxlen = $len if $len > $maxlen;
> - }
> - foreach my $rec (@$res) {
> - printf "%-${maxlen}s %s\n", $rec->{target}, $rec->{portal};
> - }
> - }],
> - lvm => [ "PVE::API2::Storage::Scan", 'lvmscan', [], { node => $nodename }, sub {
> - my $res = shift;
> - foreach my $rec (@$res) {
> - printf "$rec->{vg}\n";
> - }
> - }],
> - lvmthin => [ "PVE::API2::Storage::Scan", 'lvmthinscan', ['vg'], { node => $nodename }, sub {
> - my $res = shift;
> - foreach my $rec (@$res) {
> - printf "$rec->{lv}\n";
> - }
> - }],
> + foreach my $rec (@$res) {
> + printf "%s\n", $rec->{volname};
> + }
> + },
> + ],
> + iscsi => [
> + "PVE::API2::Storage::Scan",
> + 'iscsiscan',
> + ['portal'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> +
> + my $maxlen = 0;
> + foreach my $rec (@$res) {
> + my $len = length ($rec->{target});
> + $maxlen = $len if $len > $maxlen;
> + }
> + foreach my $rec (@$res) {
> + printf "%-${maxlen}s %s\n", $rec->{target}, $rec->{portal};
> + }
> + },
> + ],
> + lvm => [
> + "PVE::API2::Storage::Scan",
> + 'lvmscan',
> + [],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> + foreach my $rec (@$res) {
> + printf "$rec->{vg}\n";
> + }
> + },
> + ],
> + lvmthin => [
> + "PVE::API2::Storage::Scan",
> + 'lvmthinscan',
> + ['vg'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
> + foreach my $rec (@$res) {
> + printf "$rec->{lv}\n";
> + }
> + },
> + ],
> pbs => [
> "PVE::API2::Storage::Scan",
> 'pbsscan',
> @@ -652,13 +719,19 @@ our $cmddef = {
> $print_api_result,
> $PVE::RESTHandler::standard_output_options,
> ],
> - zfs => [ "PVE::API2::Storage::Scan", 'zfsscan', [], { node => $nodename }, sub {
> - my $res = shift;
> + zfs => [
> + "PVE::API2::Storage::Scan",
> + 'zfsscan',
> + [],
> + { node => $nodename },
> + sub {
> + my $res = shift;
>
> - foreach my $rec (@$res) {
> - printf "$rec->{pool}\n";
> - }
> - }],
> + foreach my $rec (@$res) {
> + printf "$rec->{pool}\n";
> + }
> + },
> + ],
> },
> nfsscan => { alias => 'scan nfs' },
> cifsscan => { alias => 'scan cifs' },
> @@ -667,55 +740,85 @@ our $cmddef = {
> lvmscan => { alias => 'scan lvm' },
> lvmthinscan => { alias => 'scan lvmthin' },
> zfsscan => { alias => 'scan zfs' },
> - path => [ __PACKAGE__, 'path', ['volume']],
> - extractconfig => [__PACKAGE__, 'extractconfig', ['volume']],
> - export => [ __PACKAGE__, 'export', ['volume', 'format', 'filename']],
> - import => [ __PACKAGE__, 'import', ['volume', 'format', 'filename'], {}, sub {
> - my $volid = shift;
> - print PVE::Storage::volume_imported_message($volid);
> - }],
> - apiinfo => [ __PACKAGE__, 'apiinfo', [], {}, sub {
> - my $res = shift;
> -
> - print "APIVER $res->{apiver}\n";
> - print "APIAGE $res->{apiage}\n";
> - }],
> - 'prune-backups' => [ __PACKAGE__, 'prunebackups', ['storage'], { node => $nodename }, sub {
> - my $res = shift;
> -
> - my ($dryrun, $list) = ($res->{dryrun}, $res->{list});
> -
> - return if !$dryrun;
> -
> - if (!scalar(@{$list})) {
> - print "No backups found\n";
> - return;
> - }
> + path => [
> + __PACKAGE__,
> + 'path',
> + ['volume'],
> + ],
> + extractconfig => [
> + __PACKAGE__,
> + 'extractconfig',
> + ['volume'],
> + ],
> + export => [
> + __PACKAGE__,
> + 'export',
> + ['volume', 'format', 'filename'],
> + ],
> + import => [
> + __PACKAGE__,
> + 'import',
> + ['volume', 'format', 'filename'],
> + {},
> + sub {
> + my $volid = shift;
> + print PVE::Storage::volume_imported_message($volid);
> + },
> + ],
> + apiinfo => [
> + __PACKAGE__,
> + 'apiinfo',
> + [],
> + {},
> + sub {
> + my $res = shift;
>
> - print "NOTE: this is only a preview and might not be what a subsequent\n" .
> - "prune call does if backups are removed/added in the meantime.\n\n";
> + print "APIVER $res->{apiver}\n";
> + print "APIAGE $res->{apiage}\n";
> + },
> + ],
> + 'prune-backups' => [
> + __PACKAGE__,
> + 'prunebackups',
> + ['storage'],
> + { node => $nodename },
> + sub {
> + my $res = shift;
>
> - my @sorted = sort {
> - my $vmcmp = PVE::Tools::safe_compare($a->{vmid}, $b->{vmid}, sub { $_[0] <=> $_[1] });
> - return $vmcmp if $vmcmp ne 0;
> - return $a->{ctime} <=> $b->{ctime};
> - } @{$list};
> + my ($dryrun, $list) = ($res->{dryrun}, $res->{list});
>
> - my $maxlen = 0;
> - foreach my $backup (@sorted) {
> - my $volid = $backup->{volid};
> - $maxlen = length($volid) if length($volid) > $maxlen;
> - }
> - $maxlen+=1;
> -
> - printf("%-${maxlen}s %15s %10s\n", 'Backup', 'Backup-ID', 'Prune-Mark');
> - foreach my $backup (@sorted) {
> - my $type = $backup->{type};
> - my $vmid = $backup->{vmid};
> - my $backup_id = defined($vmid) ? "$type/$vmid" : "$type";
> - printf("%-${maxlen}s %15s %10s\n", $backup->{volid}, $backup_id, $backup->{mark});
> - }
> - }],
> + return if !$dryrun;
> +
> + if (!scalar(@{$list})) {
> + print "No backups found\n";
> + return;
> + }
> +
> + print "NOTE: this is only a preview and might not be what a subsequent\n" .
> + "prune call does if backups are removed/added in the meantime.\n\n";
> +
> + my @sorted = sort {
> + my $vmcmp = PVE::Tools::safe_compare($a->{vmid}, $b->{vmid}, sub { $_[0] <=> $_[1] });
> + return $vmcmp if $vmcmp ne 0;
> + return $a->{ctime} <=> $b->{ctime};
> + } @{$list};
> +
> + my $maxlen = 0;
> + foreach my $backup (@sorted) {
> + my $volid = $backup->{volid};
> + $maxlen = length($volid) if length($volid) > $maxlen;
> + }
> + $maxlen+=1;
> +
> + printf("%-${maxlen}s %15s %10s\n", 'Backup', 'Backup-ID', 'Prune-Mark');
> + foreach my $backup (@sorted) {
> + my $type = $backup->{type};
> + my $vmid = $backup->{vmid};
> + my $backup_id = defined($vmid) ? "$type/$vmid" : "$type";
> + printf("%-${maxlen}s %15s %10s\n", $backup->{volid}, $backup_id, $backup->{mark});
> + }
> + },
> + ],
> };
>
> 1;
>
prev parent reply other threads:[~2021-09-27 12:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-27 7:09 Lorenz Stechauner
2021-09-27 7:09 ` [pve-devel] [PATCH storage 2/2] fix #3633: pvesm: use print_api_results Lorenz Stechauner
2021-09-27 12:36 ` Thomas Lamprecht [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cbfd8cb0-35c8-6896-b2b9-7e7ba61b6d2d@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=l.stechauner@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox