From: Friedrich Weber <f.weber@proxmox.com>
To: Proxmox VE development discussion <pve-devel@lists.proxmox.com>,
Gabriel Goller <g.goller@proxmox.com>
Subject: Re: [pve-devel] [PATCH cluster/docs/manager/network/proxmox{, -ve-rs, -firewall, -perl-rs} 00/52] Add SDN Fabrics
Date: Thu, 3 Apr 2025 10:30:05 +0200 [thread overview]
Message-ID: <c3d5e091-7a92-4f2f-be6a-4753b5691492@proxmox.com> (raw)
In-Reply-To: <20250328171340.885413-1-g.goller@proxmox.com>
On 28/03/2025 18:12, Gabriel Goller wrote:
> This series allows the user to add fabrics such as OpenFabric and OSPF over
> their clusters.
>
> Overview
> ========
>
> This series allows the user to create routed networks ('fabrics') across their
> clusters, which can be used as the underlay network for a EVPN cluster, or for
> creating Ceph full mesh clusters easily.
>
> This patch series adds the initial support for two routing protocols:
> * OpenFabric
> * OSPF
I tested a bit with packages provided Gabriel built for me (thanks!),
both OSPF and OpenFabric, and also set up a Ceph full mesh over OpenFabric.
Overall it looked quite smooth! I didn't notice huge issues, but have
some minor points below:
- I think the error message when frr+frr-pythontools is not installed
looked a bit scary. It's on me for not reading the docs, but still,
might be nice to have a friendlier error message in that case :)
- having already added one node, and then adding another using the "Add
Node" dialog, it has happened multiple times that I kept "Node" at the
default first node (which I already had defined) while I thought I was
configuring the second one, and only noticed when I submitted and got
"node already exists". And then, when I change the "Node" to the correct
one, I lost my form input :) I understand that we need to reload when
changing "Node" (the other node might have other interfaces), but to
avoid the above, maybe the dialog could preselect a node that is not yet
defined?
- when removing a fabric, the IP addresses defined on the interfaces
remain until the next reboot. I guess the reason is that ifupdown2
doesn't remove IP addresses when the corresponding stanza vanishes. Not
sure if this can be easily fixed -- if not, maybe this would be worth a
note in the docs?
- when removing the only fabric and applying, the srvreload task has a
couple of spurious error messages:
> 2025-04-03 09:35:59,354 ^[[91m ERROR^[[0m: Filename /etc/frr/frr.conf is an empty file
> frr reload command fail: command '/usr/lib/frr/frr-reload.py --stdout --reload /etc/frr/frr.conf' failed: exit code 1
> Restarting frr. at /usr/share/perl5/PVE/Network/SDN/Frr.pm line 74.
> TASK OK
- regarding the hello/csnp intervals: it would be nice to mention what the
default values are. Also, probably not relevant for this patch series, but
wanted to mention anyway: For running a Ceph full mesh over a fabric,
one probably wants to set relatively low values here (as our wiki guide
does [3])? If there is a guide in the future for setting up Ceph full mesh
over fabric, would be nice if the guide would mention that.
- I'm not so sure about this, but maybe it would be nice to show the
default-hidden hello/csnp interval columns if I have entered a value
there?
- when I remove hello interval+multiplier and the csnp via the GUI, I get
the following warning in the journal:
> Apr 03 10:20:50 fabric159 pveproxy[9244]: Use of uninitialized value $id in concatenation (.) or string at /usr/share/perl5/PVE/API2/Network/SDN/Fabrics.pm line 330.
> Apr 03 10:21:02 fabric159 pveproxy[9246]: Use of uninitialized value $id in concatenation (.) or string at /usr/share/perl5/PVE/API2/Network/SDN/Fabrics.pm line 330.
> Apr 03 10:21:02 fabric159 pveproxy[9246]: Use of uninitialized value $id in concatenation (.) or string at /usr/share/perl5/PVE/API2/Network/SDN/Fabrics.pm line 330.
- after setting up an OSPF fabric in a 3-node full mesh, I couldn't ping
the loopback addresses until I rebooted all nodes. I've attached the
task logs of the srvreloads and the ospf.cfg below [1]. After a reboot,
the pings work fine. Could it be because an OSPF with the same area
existed previously?
- probably a user error, but: after setting up an OpenFabric fabric and
rebooting, the routes didn't come up automatically. My openfabric.cfg is
in [2]. systemctl status frr shows the following:
> Apr 03 10:02:20 fabric159 systemd[1]: Started frr.service - FRRouting.
> Apr 03 10:02:21 fabric159 fabricd[699]: [NBV6R-CM3PT] OpenFabric: Needed to resync LSPDB using CSNP!
> Apr 03 10:03:48 fabric159 fabricd[699]: [QBAZ6-3YZR3] OpenFabric: Could not find two T0 routers
> Apr 03 10:02:23 fabric160 systemd[1]: Started frr.service - FRRouting.
> Apr 03 10:02:24 fabric160 fabricd[674]: [MZS0T-YRAMC] OpenFabric: Initial synchronization on ens19 complete.
> Apr 03 10:03:48 fabric160 fabricd[674]: [QBAZ6-3YZR3] OpenFabric: Could not find two T0 routers
> Apr 03 10:02:19 fabric161 systemd[1]: Started frr.service - FRRouting.
> Apr 03 10:02:21 fabric161 fabricd[681]: [MZS0T-YRAMC] OpenFabric: Initial synchronization on ens20 complete.
> Apr 03 10:03:48 fabric161 fabricd[681]: [QBAZ6-3YZR3] OpenFabric: Could not find two T0 routers
Maybe I'm just too impatient, but estarting frr and waiting for ~30 seconds fixes it.
[1]
fabric159:
2025-04-03 09:30:06,673 INFO: Called via "Namespace(input=None, reload=True, test=False, debug=False, log_level='info', stdout=True, pathspace=None, filename='/etc/frr/frr.conf', overwrite=False, bindir='/usr/bin', confdir='/etc/frr', rundir='/var/run/frr', vty_socket=None, daemon='', test_reset=False)"
2025-04-03 09:30:06,673 INFO: Loading Config object from file /etc/frr/frr.conf
2025-04-03 09:30:06,690 INFO: Loading Config object from vtysh show running
2025-04-03 09:30:06,697 INFO: "frr defaults traditional" cannot be removed
2025-04-03 09:30:06,703 INFO: Executed "ip forwarding"
2025-04-03 09:30:06,709 INFO: Executed "ipv6 forwarding"
2025-04-03 09:30:06,709 INFO: /var/run/frr/reload-B14N3D.txt content
['frr defaults datacenter\n',
'log syslog informational\n',
'router ospf\nexit\n',
'router ospf\n ospf router-id 172.16.0.159\nexit\n',
'interface dummy_1234\nexit\n',
'interface dummy_1234\n ip ospf area 1234\nexit\n',
'interface dummy_1234\n ip ospf passive\nexit\n',
'interface ens19\nexit\n',
'interface ens19\n ip ospf area 1234\nexit\n',
'interface ens20\nexit\n',
'interface ens20\n ip ospf area 1234\nexit\n',
'access-list ospf_1234_ips permit 172.16.0.0/24\n',
'route-map ospf permit 100\nexit\n',
'route-map ospf permit 100\n match ip address ospf_1234_ips\nexit\n',
'route-map ospf permit 100\n set src 172.16.0.159\nexit\n',
'ip protocol ospf route-map ospf\n',
'line vty\nexit\n']
[1667|mgmtd] sending configuration
[1668|zebra] sending configuration
[1671|ospfd] sending configuration
[1674|bgpd] sending configuration
[1668|zebra] done
[1682|watchfrr] sending configuration
[1684|staticd] sending configuration
[1685|bfdd] sending configuration
Waiting for children to finish applying config...
[1682|watchfrr] done
[1674|bgpd] done
[1684|staticd] done
[1685|bfdd] done
[1667|mgmtd] done
[1671|ospfd] done
2025-04-03 09:30:06,721 INFO: Loading Config object from vtysh show running
2025-04-03 09:30:06,729 INFO: /var/run/frr/reload-UJJQIC.txt content
['line vty\nexit\n',
'frr defaults datacenter\n',
'log syslog informational\n',
'router ospf\nexit\n',
'router ospf\n ospf router-id 172.16.0.159\nexit\n',
'interface dummy_1234\nexit\n',
'interface dummy_1234\n ip ospf area 1234\nexit\n',
'interface dummy_1234\n ip ospf passive\nexit\n',
'interface ens19\nexit\n',
'interface ens19\n ip ospf area 1234\nexit\n',
'interface ens20\nexit\n',
'interface ens20\n ip ospf area 1234\nexit\n',
'access-list ospf_1234_ips permit 172.16.0.0/24\n',
'route-map ospf permit 100\nexit\n',
'route-map ospf permit 100\n match ip address ospf_1234_ips\nexit\n',
'route-map ospf permit 100\n set src 172.16.0.159\nexit\n',
'ip protocol ospf route-map ospf\n',
'line vty\nexit\n']
[1692|mgmtd] sending configuration
[1693|zebra] sending configuration
[1696|ospfd] sending configuration
[1699|bgpd] sending configuration
[1693|zebra] done
[1707|watchfrr] sending configuration
[1709|staticd] sending configuration
[1710|bfdd] sending configuration
Waiting for children to finish applying config...
[1707|watchfrr] done
[1696|ospfd] done
MGMTD: No changes found to be committed!
[1692|mgmtd] done
[1709|staticd] done
[1699|bgpd] done
[1710|bfdd] done
TASK OK
fabric160:
2025-04-03 09:30:09,972 INFO: Called via "Namespace(input=None, reload=True, test=False, debug=False, log_level='info', stdout=True, pathspace=None, filename='/etc/frr/frr.conf', overwrite=False, bindir='/usr/bin', confdir='/etc/frr', rundir='/var/run/frr', vty_socket=None, daemon='', test_reset=False)"
2025-04-03 09:30:09,972 INFO: Loading Config object from file /etc/frr/frr.conf
2025-04-03 09:30:09,985 INFO: Loading Config object from vtysh show running
2025-04-03 09:30:09,992 INFO: "frr defaults traditional" cannot be removed
2025-04-03 09:30:09,998 INFO: Executed "ip forwarding"
2025-04-03 09:30:10,004 INFO: Executed "ipv6 forwarding"
2025-04-03 09:30:10,004 INFO: /var/run/frr/reload-5ATLT2.txt content
['frr defaults datacenter\n',
'log syslog informational\n',
'router ospf\nexit\n',
'router ospf\n ospf router-id 172.16.0.160\nexit\n',
'interface dummy_1234\nexit\n',
'interface dummy_1234\n ip ospf area 1234\nexit\n',
'interface dummy_1234\n ip ospf passive\nexit\n',
'interface ens19\nexit\n',
'interface ens19\n ip ospf area 1234\nexit\n',
'interface ens20\nexit\n',
'interface ens20\n ip ospf area 1234\nexit\n',
'access-list ospf_1234_ips permit 172.16.0.0/24\n',
'route-map ospf permit 100\nexit\n',
'route-map ospf permit 100\n match ip address ospf_1234_ips\nexit\n',
'route-map ospf permit 100\n set src 172.16.0.160\nexit\n',
'ip protocol ospf route-map ospf\n',
'line vty\nexit\n']
[1699|mgmtd] sending configuration
[1700|zebra] sending configuration
[1703|ospfd] sending configuration
[1706|bgpd] sending configuration
[1700|zebra] done
[1714|watchfrr] sending configuration
[1716|staticd] sending configuration
[1717|bfdd] sending configuration
Waiting for children to finish applying config...
[1714|watchfrr] done
[1716|staticd] done
[1706|bgpd] done
[1717|bfdd] done
[1699|mgmtd] done
[1703|ospfd] done
2025-04-03 09:30:10,016 INFO: Loading Config object from vtysh show running
2025-04-03 09:30:10,023 INFO: /var/run/frr/reload-NFS4UM.txt content
['line vty\nexit\n',
'frr defaults datacenter\n',
'log syslog informational\n',
'router ospf\nexit\n',
'router ospf\n ospf router-id 172.16.0.160\nexit\n',
'interface dummy_1234\nexit\n',
'interface dummy_1234\n ip ospf area 1234\nexit\n',
'interface dummy_1234\n ip ospf passive\nexit\n',
'interface ens19\nexit\n',
'interface ens19\n ip ospf area 1234\nexit\n',
'interface ens20\nexit\n',
'interface ens20\n ip ospf area 1234\nexit\n',
'access-list ospf_1234_ips permit 172.16.0.0/24\n',
'route-map ospf permit 100\nexit\n',
'route-map ospf permit 100\n match ip address ospf_1234_ips\nexit\n',
'route-map ospf permit 100\n set src 172.16.0.160\nexit\n',
'ip protocol ospf route-map ospf\n',
'line vty\nexit\n']
[1724|mgmtd] sending configuration
[1725|zebra] sending configuration
[1728|ospfd] sending configuration
[1731|bgpd] sending configuration
[1739|watchfrr] sending configuration
[1725|zebra] done
[1741|staticd] sending configuration
[1742|bfdd] sending configuration
Waiting for children to finish applying config...
[1739|watchfrr] done
[1741|staticd] done
[1728|ospfd] done
[1731|bgpd] done
[1742|bfdd] done
MGMTD: No changes found to be committed!
[1724|mgmtd] done
TASK OK
fabric161:
2025-04-03 09:30:08,321 INFO: Called via "Namespace(input=None, reload=True, test=False, debug=False, log_level='info', stdout=True, pathspace=None, filename='/etc/frr/frr.conf', overwrite=False, bindir='/usr/bin', confdir='/etc/frr', rundir='/var/run/frr', vty_socket=None, daemon='', test_reset=False)"
2025-04-03 09:30:08,321 INFO: Loading Config object from file /etc/frr/frr.conf
2025-04-03 09:30:08,334 INFO: Loading Config object from vtysh show running
2025-04-03 09:30:08,342 INFO: "frr defaults traditional" cannot be removed
2025-04-03 09:30:08,348 INFO: Executed "ip forwarding"
2025-04-03 09:30:08,354 INFO: Executed "ipv6 forwarding"
2025-04-03 09:30:08,354 INFO: /var/run/frr/reload-PVFBCH.txt content
['frr defaults datacenter\n',
'log syslog informational\n',
'router ospf\nexit\n',
'router ospf\n ospf router-id 172.16.0.161\nexit\n',
'interface dummy_1234\nexit\n',
'interface dummy_1234\n ip ospf area 1234\nexit\n',
'interface dummy_1234\n ip ospf passive\nexit\n',
'interface ens19\nexit\n',
'interface ens19\n ip ospf area 1234\nexit\n',
'interface ens20\nexit\n',
'interface ens20\n ip ospf area 1234\nexit\n',
'access-list ospf_1234_ips permit 172.16.0.0/24\n',
'route-map ospf permit 100\nexit\n',
'route-map ospf permit 100\n match ip address ospf_1234_ips\nexit\n',
'route-map ospf permit 100\n set src 172.16.0.161\nexit\n',
'ip protocol ospf route-map ospf\n',
'line vty\nexit\n']
[1671|mgmtd] sending configuration
[1672|zebra] sending configuration
[1675|ospfd] sending configuration
[1678|bgpd] sending configuration
[1686|watchfrr] sending configuration
[1688|staticd] sending configuration
[1672|zebra] done
[1689|bfdd] sending configuration
Waiting for children to finish applying config...
[1688|staticd] done
[1686|watchfrr] done
[1689|bfdd] done
[1678|bgpd] done
[1671|mgmtd] done
[1675|ospfd] done
2025-04-03 09:30:08,367 INFO: Loading Config object from vtysh show running
2025-04-03 09:30:08,374 INFO: /var/run/frr/reload-SKOSWJ.txt content
['line vty\nexit\n',
'frr defaults datacenter\n',
'log syslog informational\n',
'router ospf\nexit\n',
'router ospf\n ospf router-id 172.16.0.161\nexit\n',
'interface dummy_1234\nexit\n',
'interface dummy_1234\n ip ospf area 1234\nexit\n',
'interface dummy_1234\n ip ospf passive\nexit\n',
'interface ens19\nexit\n',
'interface ens19\n ip ospf area 1234\nexit\n',
'interface ens20\nexit\n',
'interface ens20\n ip ospf area 1234\nexit\n',
'access-list ospf_1234_ips permit 172.16.0.0/24\n',
'route-map ospf permit 100\nexit\n',
'route-map ospf permit 100\n match ip address ospf_1234_ips\nexit\n',
'route-map ospf permit 100\n set src 172.16.0.161\nexit\n',
'ip protocol ospf route-map ospf\n',
'line vty\nexit\n']
[1696|mgmtd] sending configuration
[1697|zebra] sending configuration
[1700|ospfd] sending configuration
[1703|bgpd] sending configuration
[1697|zebra] done
[1711|watchfrr] sending configuration
[1713|staticd] sending configuration
Waiting for children to finish applying config...
[1714|bfdd] sending configuration
[1711|watchfrr] done
[1713|staticd] done
[1714|bfdd] done
[1700|ospfd] done
[1703|bgpd] done
MGMTD: No changes found to be committed!
[1696|mgmtd] done
TASK OK
# cat /etc/pve/sdn/fabrics/ospf.cfg
fabric: 1234
loopback_prefix 172.16.0.0/24
node: 1234_fabric159
interface name=ens19,ip=172.31.0.159/24
interface name=ens20,ip=172.31.2.159/24
router_id 172.16.0.159
node: 1234_fabric160
interface name=ens19,ip=172.31.0.160/24
interface name=ens20,ip=172.31.1.160/24
router_id 172.16.0.160
node: 1234_fabric161
interface name=ens19,ip=172.31.1.161/24
interface name=ens20,ip=172.31.2.161/24
router_id 172.16.0.161
[2]
# cat /etc/pve/sdn/fabrics/openfabric.cfg
fabric: fabric
hello_interval 2
loopback_prefix 172.16.0.0/24
node: fabric_fabric159
interface name=ens19,ip=172.31.0.159/24
interface name=ens20,ip=172.31.2.159/24
router_id 172.16.0.159
node: fabric_fabric160
interface name=ens19,ip=172.31.0.160/24
interface name=ens20,ip=172.31.1.160/24
router_id 172.16.0.160
node: fabric_fabric161
interface name=ens19,ip=172.31.1.161/24
interface name=ens20,ip=172.31.2.161/24
router_id 172.16.0.161
[3] https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server#Routed_Setup_(with_Fallback)
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2025-04-03 8:30 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-28 17:12 Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox 1/1] serde: add string_as_bool module for boolean string parsing Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 01/17] add proxmox-network-types crate Gabriel Goller
2025-03-31 14:09 ` Thomas Lamprecht
2025-03-31 14:38 ` Stefan Hanreich
2025-03-31 16:20 ` Thomas Lamprecht
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 02/17] network-types: add common hostname and openfabric types Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 03/17] network-types: add openfabric NET type Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 04/17] network-types: move Ipv4Cidr and Ipv6Cidr types Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 05/17] frr: create proxmox-frr crate Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 06/17] frr: add common frr types Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 07/17] frr: add openfabric types Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 08/17] frr: add ospf types Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 09/17] frr: add route-map types Gabriel Goller
2025-03-28 17:12 ` [pve-devel] [PATCH proxmox-ve-rs 10/17] frr: add generic types over openfabric and ospf Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-ve-rs 11/17] frr: add serializer for all FRR types Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-ve-rs 12/17] ve-config: add openfabric section-config Gabriel Goller
2025-03-31 13:48 ` Christoph Heiss
2025-03-31 15:04 ` Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-ve-rs 13/17] ve-config: add ospf section-config Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-ve-rs 14/17] ve-config: add FRR conversion helpers for openfabric and ospf Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-ve-rs 15/17] ve-config: add validation for section-config Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-ve-rs 16/17] ve-config: add section-config to frr types conversion Gabriel Goller
2025-03-31 13:51 ` Christoph Heiss
2025-03-31 14:31 ` Stefan Hanreich
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-ve-rs 17/17] ve-config: add integrations tests Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-firewall 1/1] firewall: nftables: migrate to proxmox-network-types Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-perl-rs 1/7] perl-rs: sdn: initial fabric infrastructure Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-perl-rs 2/7] perl-rs: sdn: add CRUD helpers for OpenFabric fabric management Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-perl-rs 3/7] perl-rs: sdn: OpenFabric perlmod methods Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-perl-rs 4/7] perl-rs: sdn: implement OSPF interface file configuration generation Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-perl-rs 5/7] perl-rs: sdn: add CRUD helpers for OSPF fabric management Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-perl-rs 6/7] perl-rs: sdn: OSPF perlmod methods Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH proxmox-perl-rs 7/7] perl-rs: sdn: implement OSPF interface file configuration generation Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-cluster 1/1] cluster: add sdn fabrics config files Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 01/17] sdn: fix value returned by pending_config Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 02/17] debian: add dependency to proxmox-perl-rs Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 03/17] fabrics: add fabrics module Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 04/17] refactor: controller: move frr methods into helper Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 05/17] controllers: implement new api for frr config generation Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 06/17] sdn: add frr config generation helper Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 07/17] test: isis: add test for standalone configuration Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 08/17] sdn: frr: add daemon status to frr helper Gabriel Goller
2025-04-02 10:41 ` Fabian Grünbichler
2025-04-02 10:50 ` Stefan Hanreich
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 09/17] sdn: running: apply fabrics config Gabriel Goller
2025-04-02 10:41 ` Fabian Grünbichler
2025-04-02 12:26 ` Stefan Hanreich
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 10/17] fabrics: generate ifupdown configuration Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 11/17] api: add fabrics subfolder Gabriel Goller
2025-04-02 10:41 ` Fabian Grünbichler
2025-04-02 12:20 ` Stefan Hanreich
2025-04-02 12:29 ` Fabian Grünbichler
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 12/17] api: fabrics: add common helpers Gabriel Goller
2025-04-02 10:41 ` Fabian Grünbichler
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 13/17] fabric: openfabric: add api endpoints Gabriel Goller
2025-04-02 10:37 ` Fabian Grünbichler
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 14/17] fabric: ospf: " Gabriel Goller
2025-04-02 10:37 ` Fabian Grünbichler
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 15/17] test: fabrics: add test cases for ospf and openfabric + evpn Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 16/17] frr: bump frr config version to 10.2.1 Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-network 17/17] frr: fix reloading frr configuration Gabriel Goller
2025-04-02 10:37 ` Fabian Grünbichler
2025-04-02 10:42 ` Stefan Hanreich
2025-03-28 17:13 ` [pve-devel] [PATCH pve-manager 1/7] api: use new generalized frr and etc network config helper functions Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-manager 2/7] fabrics: add common interface panel Gabriel Goller
2025-04-02 9:26 ` Friedrich Weber
2025-04-02 10:04 ` Gabriel Goller
2025-04-02 10:10 ` Friedrich Weber
2025-03-28 17:13 ` [pve-devel] [PATCH pve-manager 3/7] fabrics: add additional interface fields for openfabric and ospf Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-manager 4/7] fabrics: add FabricEdit components Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-manager 5/7] fabrics: add NodeEdit components Gabriel Goller
2025-04-03 9:16 ` Christoph Heiss
2025-04-04 15:45 ` Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-manager 6/7] fabrics: Add main FabricView Gabriel Goller
2025-04-02 9:26 ` Friedrich Weber
2025-04-02 9:50 ` Christoph Heiss
2025-04-02 10:40 ` Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-manager 7/7] utils: avoid line-break in pending changes message Gabriel Goller
2025-03-28 17:13 ` [pve-devel] [PATCH pve-docs 1/1] fabrics: add initial documentation for sdn fabrics Gabriel Goller
2025-03-31 8:44 ` Shannon Sterz
2025-03-31 12:24 ` Gabriel Goller
2025-04-02 8:43 ` Gabriel Goller
2025-04-02 8:49 ` Christoph Heiss
2025-04-02 9:09 ` Gabriel Goller
2025-04-02 9:16 ` Christoph Heiss
2025-04-03 8:30 ` Friedrich Weber [this message]
2025-04-03 10:21 ` [pve-devel] [PATCH cluster/docs/manager/network/proxmox{, -ve-rs, -firewall, -perl-rs} 00/52] Add SDN Fabrics Gabriel Goller
2025-04-03 13:44 ` Friedrich Weber
2025-04-03 14:03 ` Stefan Hanreich
2025-04-03 14:20 ` Friedrich Weber
2025-04-04 7:53 ` Stefan Hanreich
2025-04-04 10:55 ` Hannes Duerr
2025-04-04 12:48 ` Gabriel Goller
2025-04-04 12:53 ` Hannes Duerr
2025-04-04 14:26 ` Gabriel Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c3d5e091-7a92-4f2f-be6a-4753b5691492@proxmox.com \
--to=f.weber@proxmox.com \
--cc=g.goller@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal