public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
* [pve-devel] [PATCH docs] local-zfs: correct language errors
@ 2024-08-13 10:23 Alexander Zeidler
  2024-08-13 13:58 ` [pve-devel] applied: " Fiona Ebner
  0 siblings, 1 reply; 2+ messages in thread
From: Alexander Zeidler @ 2024-08-13 10:23 UTC (permalink / raw)
  To: pve-devel

Signed-off-by: Alexander Zeidler <a.zeidler@proxmox.com>
---
 local-zfs.adoc | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/local-zfs.adoc b/local-zfs.adoc
index 130f9d6..7ddf50a 100644
--- a/local-zfs.adoc
+++ b/local-zfs.adoc
@@ -442,7 +442,7 @@ recommend to:
 # zpool create -f -o ashift=12 <pool> <device> log <log-device>
 ----
 
-In above example a single `<device>` and a single `<log-device>` is used, but you
+In the example above, a single `<device>` and a single `<log-device>` is used, but you
 can also combine this with other RAID variants, as described in the
 xref:sysadmin_zfs_create_new_zpool_raid0[Create a new pool with RAID] section.
 
@@ -465,19 +465,19 @@ protection that you want to use for improving the overall performance of your
 pool.
 
 As the maximum size of a log device should be about half the size of the
-installed physical memory, it means that the ZIL will mostly likely only take up
+installed physical memory, it means that the ZIL will most likely only take up
 a relatively small part of the SSD, the remaining space can be used as cache.
 
 First you have to create two GPT partitions on the SSD with `parted` or `gdisk`.
 
-Then you're ready to add them to an pool:
+Then you're ready to add them to a pool:
 
 .Add both, a separate log device and a second-level cache, to an existing pool
 ----
 # zpool add -f <pool> log <device-part1> cache <device-part2>
 ----
 
-Just replay `<pool>`, `<device-part1>` and `<device-part2>` with the pool name
+Just replace `<pool>`, `<device-part1>` and `<device-part2>` with the pool name
 and the two `/dev/disk/by-id/` paths to the partitions.
 
 You can also add ZIL and cache separately.
@@ -527,8 +527,8 @@ process of the new disk has progressed.
 # proxmox-boot-tool init <new disk's ESP> [grub]
 ----
 
-NOTE: `ESP` stands for EFI System Partition, which is setup as partition #2 on
-bootable disks setup by the {pve} installer since version 5.4. For details, see
+NOTE: `ESP` stands for EFI System Partition, which is set up as partition #2 on
+bootable disks when using the {pve} installer since version 5.4. For details, see
 xref:sysboot_proxmox_boot_setup[Setting up a new partition for use as synced ESP].
 
 NOTE: Make sure to pass 'grub' as mode to `proxmox-boot-tool init` if
@@ -541,7 +541,7 @@ especially if Secure Boot is enabled!
 # grub-install <new disk>
 ----
 NOTE: Plain GRUB is only used on systems installed with {pve} 6.3 or earlier,
-which have not been manually migrated to using `proxmox-boot-tool` yet.
+which have not been manually migrated to use `proxmox-boot-tool` yet.
 
 
 Configure E-Mail Notification
-- 
2.39.2



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2024-08-13 13:58 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-08-13 10:23 [pve-devel] [PATCH docs] local-zfs: correct language errors Alexander Zeidler
2024-08-13 13:58 ` [pve-devel] applied: " Fiona Ebner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal