* [pve-devel] [PATCH docs 2/2] update links to docs.ceph.com
2020-09-24 7:27 [pve-devel] [PATCH docs 1/2] update docs link for cephfs Alwin Antreich
@ 2020-09-24 7:27 ` Alwin Antreich
2020-09-25 7:14 ` Thomas Lamprecht
0 siblings, 1 reply; 3+ messages in thread
From: Alwin Antreich @ 2020-09-24 7:27 UTC (permalink / raw)
To: pve-devel
ceph migrated their documentation to readthedocs with a minor uri change
https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/thread/AQZJG75IST7HFDW7OB5MNCITQOVAAUR4/
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
---
pveceph.adoc | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/pveceph.adoc b/pveceph.adoc
index baf0988..6771b84 100644
--- a/pveceph.adoc
+++ b/pveceph.adoc
@@ -58,15 +58,15 @@ and VMs on the same node is possible.
To simplify management, we provide 'pveceph' - a tool to install and
manage {ceph} services on {pve} nodes.
-.Ceph consists of a couple of Daemons footnote:[Ceph intro https://docs.ceph.com/docs/{ceph_codename}/start/intro/], for use as a RBD storage:
+.Ceph consists of a couple of Daemons footnote:[Ceph intro https://docs.ceph.com/en/{ceph_codename}/start/intro/], for use as a RBD storage:
- Ceph Monitor (ceph-mon)
- Ceph Manager (ceph-mgr)
- Ceph OSD (ceph-osd; Object Storage Daemon)
TIP: We highly recommend to get familiar with Ceph's architecture
-footnote:[Ceph architecture https://docs.ceph.com/docs/{ceph_codename}/architecture/]
+footnote:[Ceph architecture https://docs.ceph.com/en/{ceph_codename}/architecture/]
and vocabulary
-footnote:[Ceph glossary https://docs.ceph.com/docs/{ceph_codename}/glossary].
+footnote:[Ceph glossary https://docs.ceph.com/en/{ceph_codename}/glossary].
Precondition
@@ -76,7 +76,7 @@ To build a hyper-converged Proxmox + Ceph Cluster there should be at least
three (preferably) identical servers for the setup.
Check also the recommendations from
-https://docs.ceph.com/docs/{ceph_codename}/start/hardware-recommendations/[Ceph's website].
+https://docs.ceph.com/en/{ceph_codename}/start/hardware-recommendations/[Ceph's website].
.CPU
Higher CPU core frequency reduce latency and should be preferred. As a simple
@@ -244,7 +244,7 @@ configuration file.
Ceph Monitor
-----------
The Ceph Monitor (MON)
-footnote:[Ceph Monitor https://docs.ceph.com/docs/{ceph_codename}/start/intro/]
+footnote:[Ceph Monitor https://docs.ceph.com/en/{ceph_codename}/start/intro/]
maintains a master copy of the cluster map. For high availability you need to
have at least 3 monitors. One monitor will already be installed if you
used the installation wizard. You won't need more than 3 monitors as long
@@ -290,7 +290,7 @@ Ceph Manager
------------
The Manager daemon runs alongside the monitors. It provides an interface to
monitor the cluster. Since the Ceph luminous release at least one ceph-mgr
-footnote:[Ceph Manager https://docs.ceph.com/docs/{ceph_codename}/mgr/] daemon is
+footnote:[Ceph Manager https://docs.ceph.com/en/{ceph_codename}/mgr/] daemon is
required.
[[pveceph_create_mgr]]
@@ -464,7 +464,7 @@ It is advised to calculate the PG number depending on your setup, you can find
the formula and the PG calculator footnote:[PG calculator
https://ceph.com/pgcalc/] online. From Ceph Nautilus onwards it is possible to
increase and decrease the number of PGs later on footnote:[Placement Groups
-https://docs.ceph.com/docs/{ceph_codename}/rados/operations/placement-groups/].
+https://docs.ceph.com/en/{ceph_codename}/rados/operations/placement-groups/].
You can create pools through command line or on the GUI on each PVE host under
@@ -481,7 +481,7 @@ mark the checkbox "Add storages" in the GUI or use the command line option
Further information on Ceph pool handling can be found in the Ceph pool
operation footnote:[Ceph pool operation
-https://docs.ceph.com/docs/{ceph_codename}/rados/operations/pools/]
+https://docs.ceph.com/en/{ceph_codename}/rados/operations/pools/]
manual.
@@ -514,7 +514,7 @@ advantage that no central index service is needed. CRUSH works with a map of
OSDs, buckets (device locations) and rulesets (data replication) for pools.
NOTE: Further information can be found in the Ceph documentation, under the
-section CRUSH map footnote:[CRUSH map https://docs.ceph.com/docs/{ceph_codename}/rados/operations/crush-map/].
+section CRUSH map footnote:[CRUSH map https://docs.ceph.com/en/{ceph_codename}/rados/operations/crush-map/].
This map can be altered to reflect different replication hierarchies. The object
replicas can be separated (eg. failure domains), while maintaining the desired
@@ -660,7 +660,7 @@ Since Luminous (12.2.x) you can also have multiple active metadata servers
running, but this is normally only useful for a high count on parallel clients,
as else the `MDS` seldom is the bottleneck. If you want to set this up please
refer to the ceph documentation. footnote:[Configuring multiple active MDS
-daemons https://docs.ceph.com/docs/{ceph_codename}/cephfs/multimds/]
+daemons https://docs.ceph.com/en/{ceph_codename}/cephfs/multimds/]
[[pveceph_fs_create]]
Create CephFS
@@ -692,7 +692,7 @@ This creates a CephFS named `'cephfs'' using a pool for its data named
Check the xref:pve_ceph_pools[{pve} managed Ceph pool chapter] or visit the
Ceph documentation for more information regarding a fitting placement group
number (`pg_num`) for your setup footnote:[Ceph Placement Groups
-https://docs.ceph.com/docs/{ceph_codename}/rados/operations/placement-groups/].
+https://docs.ceph.com/en/{ceph_codename}/rados/operations/placement-groups/].
Additionally, the `'--add-storage'' parameter will add the CephFS to the {pve}
storage configuration after it was created successfully.
@@ -782,7 +782,7 @@ object in a PG for its health. There are two forms of Scrubbing, daily
cheap metadata checks and weekly deep data checks. The weekly deep scrub reads
the objects and uses checksums to ensure data integrity. If a running scrub
interferes with business (performance) needs, you can adjust the time when
-scrubs footnote:[Ceph scrubbing https://docs.ceph.com/docs/{ceph_codename}/rados/configuration/osd-config-ref/#scrubbing]
+scrubs footnote:[Ceph scrubbing https://docs.ceph.com/en/{ceph_codename}/rados/configuration/osd-config-ref/#scrubbing]
are executed.
@@ -806,10 +806,10 @@ pve# ceph -w
To get a more detailed view, every ceph service has a log file under
`/var/log/ceph/` and if there is not enough detail, the log level can be
-adjusted footnote:[Ceph log and debugging https://docs.ceph.com/docs/{ceph_codename}/rados/troubleshooting/log-and-debug/].
+adjusted footnote:[Ceph log and debugging https://docs.ceph.com/en/{ceph_codename}/rados/troubleshooting/log-and-debug/].
You can find more information about troubleshooting
-footnote:[Ceph troubleshooting https://docs.ceph.com/docs/{ceph_codename}/rados/troubleshooting/]
+footnote:[Ceph troubleshooting https://docs.ceph.com/en/{ceph_codename}/rados/troubleshooting/]
a Ceph cluster on the official website.
--
2.27.0
^ permalink raw reply [flat|nested] 3+ messages in thread