From: "Christoph Heiss" <c.heiss@proxmox.com>
To: "Stefan Hanreich" <s.hanreich@proxmox.com>
Cc: Proxmox VE development discussion <pve-devel@lists.proxmox.com>
Subject: Re: [pve-devel] [PATCH proxmox 2/2] network-types: add hostname type
Date: Tue, 01 Apr 2025 15:54:50 +0200 [thread overview]
Message-ID: <D8VCQAP1N3UA.2K8R8DPL9BA28@proxmox.com> (raw)
In-Reply-To: <20250401132106.309957-2-s.hanreich@proxmox.com>
On Tue Apr 1, 2025 at 3:21 PM CEST, Stefan Hanreich wrote:
> Add a type for representing Linux hostnames. These are the same
> constraints as the installer enforces [1].
Actually, the regex is not *fully* complete, see parse_fqdn() in the
same file in [1].
[..]
> [1] https://git.proxmox.com/?p=pve-installer.git;a=blob;f=Proxmox/Sys/Net.pm;h=81cb15f0042b195461324fffeca53d732133629e;hb=HEAD#l11
>
[..]
> diff --git a/proxmox-network-types/src/hostname.rs b/proxmox-network-types/src/hostname.rs
> new file mode 100644
> index 00000000..f183aecb
> --- /dev/null
> +++ b/proxmox-network-types/src/hostname.rs
[..]
> +/// Hostname of a Linux machine
> +///
> +/// A hostname is at most 63 characters long and must only contain lowercase alphanumeric
> +/// characters as well as hyphens. It must not start or end with a hyphen.
This should probably also reject purely numeric hostnames, as mentioned
in Bugzilla #1054 [0]. This isn't a requirement per any RFC, but seems
to can cause subtle bugs. It's enforced in the installer too.
[0] https://bugzilla.proxmox.com/show_bug.cgi?id=1054
> +#[derive(Debug, Deserialize, Serialize, Clone, Eq, Hash, PartialOrd, Ord, PartialEq)]
> +pub struct Hostname(String);
> +
[..]
> +
> +impl Hostname {
> + /// Constructs a new hostname from a string
> + ///
> + /// This function accepts characters in any case, but the resulting hostname will be
> + /// lowercased.
> + pub fn new(name: impl AsRef<str>) -> Result<Self, HostnameError> {
> + let name_ref = name.as_ref();
> +
> + if !(1..63).contains(&name_ref.len()) {
This actually fails for hostnames exactly 63 characters long (which
should be accepted), as `..` is non-inclusive :^)
E.g. the following tests, adapted from proxmox-installer-common/utils.rs
in pve-installer:
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn too_long() {
assert!(Hostname::new(format!("{}.com", "a".repeat(63))).is_ok());
assert!(Hostname::new(format!("{}.com", "a".repeat(64))).is_err());
}
}
> + return Err(HostnameError::InvalidLength);
> + }
> +
> + let host_name = name_ref.to_lowercase();
> +
> + let mut characters = host_name.chars();
> +
> + // first character must not be a hyphen
> + // SAFETY: ok because of length check
> + if !characters.next().unwrap().is_alphanumeric() {
This should rather use .is_ascii_alphanumeric(). Otherwise any
alphanumeric Unicode character is accepted [1], but hostnames may be
ASCII only, as per e.g. RFC 952 ("ASSUMPTIONS") and hostname(7) [2].
[1] https://doc.rust-lang.org/std/primitive.char.html#method.is_alphabetic
[2] https://manpages.debian.org/bookworm/manpages/hostname.7.en.html
> + return Err(HostnameError::InvalidSymbols);
> + }
> +
> + if !characters.all(|c| c.is_alphanumeric() || c == '-') {
^ same as above.
> + return Err(HostnameError::InvalidSymbols);
> + }
> +
> + // last character must not be a hyphen
> + // SAFETY: ok because of length check
> + if !host_name.chars().next_back().unwrap().is_alphanumeric() {
^ same as above.
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2025-04-01 13:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-01 13:21 [pve-devel] [PATCH proxmox 1/2] network-types: initial commit Stefan Hanreich
2025-04-01 13:21 ` [pve-devel] [PATCH proxmox 2/2] network-types: add hostname type Stefan Hanreich
2025-04-01 13:28 ` Maximiliano Sandoval
2025-04-01 13:54 ` Christoph Heiss [this message]
2025-04-01 14:02 ` Stefan Hanreich
2025-04-01 13:21 ` [pve-devel] [PATCH proxmox-ve-rs 1/1] ve-config: move types to proxmox-network-types Stefan Hanreich
2025-04-01 13:21 ` [pve-devel] [PATCH proxmox-firewall 1/1] firewall: nftables: migrate " Stefan Hanreich
2025-04-01 13:36 ` [pve-devel] superseded: [PATCH proxmox 1/2] network-types: initial commit Stefan Hanreich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D8VCQAP1N3UA.2K8R8DPL9BA28@proxmox.com \
--to=c.heiss@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
--cc=s.hanreich@proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal