[pve-devel] does somebody have an hetzner or ovh server to do test ?

[pve-devel] does somebody have an hetzner or ovh server to do test ?

[Alexandre DERUMIER]

Hi,

I'm currently looking to test ip failover (single /32 ip or subnet range)
on public provider like hetzner or ovh.

I have see a lot of users asking questions on the forum about routed setup.

/32 is a bit tricky with point to point configuration,

and I'll would like to implement them in sdn configuration (as I'm working on ip management).


I just need a small server, 1 single failover /32 ip and 1 small failover subnet.


If nobody can help, no problem, I'll rent a small server for 1 month.


Alexandre


(BTW: I'll try to send a new sdn patch series next week, I'm currently working on ip dns api registration)

Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?

[Stephan Leemburg]

Hi Alexandre,

Sorry for the late reply.

But actually, I do have 2 OVH based subscribed proxmox systems.

They both have 16 failover ip addresses. I have once tested the failover 
of the complete /28 block and - although there are costs involved - it 
works.

What would you like to test? If it does not disturb my production 
servers, then I think I can help you.

Kind regards,

Met vriendelijke groet,
Stephan Leemburg
IT Functions

e: sleemburg@it-functions.nl
p: +31 (0)71 889 23 33
m: +31(0)6 83 22 30 69
kvk: 27313647

On 19-08-2020 08:57, Alexandre DERUMIER wrote:
> Hi,
>
> I'm currently looking to test ip failover (single /32 ip or subnet range)
> on public provider like hetzner or ovh.
>
> I have see a lot of users asking questions on the forum about routed setup.
>
> /32 is a bit tricky with point to point configuration,
>
> and I'll would like to implement them in sdn configuration (as I'm working on ip management).
>
>
> I just need a small server, 1 single failover /32 ip and 1 small failover subnet.
>
>
> If nobody can help, no problem, I'll rent a small server for 1 month.
>
>
> Alexandre
>
>
> (BTW: I'll try to send a new sdn patch series next week, I'm currently working on ip dns api registration)
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>

Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?

[Alexandre DERUMIER]

Hi Stephan,

Thanks for the help

>>What would you like to test? If it does not disturb my production
>>servers, then I think I can help you.

I would like to do a lot of setup test, so I'll break your production ;)
I'm going to test routed setup, but also bgp-evpn,etc...
I have a friend working at ovh, I'll try to have some server to test.
but thanks anyway.


>>They both have 16 failover ip addresses. I have once tested the failover 
>>of the complete /28 block and - although there are costs involved - it 
>>works. 

Interesting, you have failover le full /28 block between server ?
If yes, do you have done it manually ? or through the api ?
(In the future, I would like to implemented auto failover with keepalived/vrrp or something like that)


----- Mail original -----
De: "Stephan Leemburg" <sleemburg@it-functions.nl>
À: "Proxmox VE development discussion" <pve-devel@lists.proxmox.com>
Envoyé: Samedi 22 Août 2020 18:01:16
Objet: Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?

Hi Alexandre, 

Sorry for the late reply. 

But actually, I do have 2 OVH based subscribed proxmox systems. 

They both have 16 failover ip addresses. I have once tested the failover 
of the complete /28 block and - although there are costs involved - it 
works. 

What would you like to test? If it does not disturb my production 
servers, then I think I can help you. 

Kind regards, 

Met vriendelijke groet, 
Stephan Leemburg 
IT Functions 

e: sleemburg@it-functions.nl 
p: +31 (0)71 889 23 33 
m: +31(0)6 83 22 30 69 
kvk: 27313647 

On 19-08-2020 08:57, Alexandre DERUMIER wrote: 
> Hi, 
> 
> I'm currently looking to test ip failover (single /32 ip or subnet range) 
> on public provider like hetzner or ovh. 
> 
> I have see a lot of users asking questions on the forum about routed setup. 
> 
> /32 is a bit tricky with point to point configuration, 
> 
> and I'll would like to implement them in sdn configuration (as I'm working on ip management). 
> 
> 
> I just need a small server, 1 single failover /32 ip and 1 small failover subnet. 
> 
> 
> If nobody can help, no problem, I'll rent a small server for 1 month. 
> 
> 
> Alexandre 
> 
> 
> (BTW: I'll try to send a new sdn patch series next week, I'm currently working on ip dns api registration) 
> 
> 
> 
> _______________________________________________ 
> pve-devel mailing list 
> pve-devel@lists.proxmox.com 
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
> 

_______________________________________________ 
pve-devel mailing list 
pve-devel@lists.proxmox.com 
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 

Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?

[Thomas G]

Hello,

OVH provide Proxmox for their dedicated server offer.

You should ask for free temporary servers, it's at least the minimum than
they could do to support the open source community.

Thomas.

On Tue, Aug 25, 2020, 09:28 Alexandre DERUMIER <aderumier@odiso.com> wrote:

> Hi Stephan,
>
> Thanks for the help
>
> >>What would you like to test? If it does not disturb my production
> >>servers, then I think I can help you.
>
> I would like to do a lot of setup test, so I'll break your production ;)
> I'm going to test routed setup, but also bgp-evpn,etc...
> I have a friend working at ovh, I'll try to have some server to test.
> but thanks anyway.
>
>
> >>They both have 16 failover ip addresses. I have once tested the failover
> >>of the complete /28 block and - although there are costs involved - it
> >>works.
>
> Interesting, you have failover le full /28 block between server ?
> If yes, do you have done it manually ? or through the api ?
> (In the future, I would like to implemented auto failover with
> keepalived/vrrp or something like that)
>
>
> ----- Mail original -----
> De: "Stephan Leemburg" <sleemburg@it-functions.nl>
> À: "Proxmox VE development discussion" <pve-devel@lists.proxmox.com>
> Envoyé: Samedi 22 Août 2020 18:01:16
> Objet: Re: [pve-devel] does somebody have an hetzner or ovh server to do
> test ?
>
> Hi Alexandre,
>
> Sorry for the late reply.
>
> But actually, I do have 2 OVH based subscribed proxmox systems.
>
> They both have 16 failover ip addresses. I have once tested the failover
> of the complete /28 block and - although there are costs involved - it
> works.
>
> What would you like to test? If it does not disturb my production
> servers, then I think I can help you.
>
> Kind regards,
>
> Met vriendelijke groet,
> Stephan Leemburg
> IT Functions
>
> e: sleemburg@it-functions.nl
> p: +31 (0)71 889 23 33
> m: +31(0)6 83 22 30 69
> kvk: 27313647
>
> On 19-08-2020 08:57, Alexandre DERUMIER wrote:
> > Hi,
> >
> > I'm currently looking to test ip failover (single /32 ip or subnet
> range)
> > on public provider like hetzner or ovh.
> >
> > I have see a lot of users asking questions on the forum about routed
> setup.
> >
> > /32 is a bit tricky with point to point configuration,
> >
> > and I'll would like to implement them in sdn configuration (as I'm
> working on ip management).
> >
> >
> > I just need a small server, 1 single failover /32 ip and 1 small
> failover subnet.
> >
> >
> > If nobody can help, no problem, I'll rent a small server for 1 month.
> >
> >
> > Alexandre
> >
> >
> > (BTW: I'll try to send a new sdn patch series next week, I'm currently
> working on ip dns api registration)
> >
> >
> >
> > _______________________________________________
> > pve-devel mailing list
> > pve-devel@lists.proxmox.com
> > https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
> >
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>

Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?

[Stephan Leemburg]

On 25-08-2020 09:28, Alexandre DERUMIER wrote:
> Hi Stephan,
>
> Thanks for the help
>
>>> What would you like to test? If it does not disturb my production
>>> servers, then I think I can help you.
> I would like to do a lot of setup test, so I'll break your production ;)

Oh, that would not be good ;-)

> I'm going to test routed setup, but also bgp-evpn,etc...
> I have a friend working at ovh, I'll try to have some server to test.
Hopefully they will sponsor you.
> but thanks anyway.
>
You're welcome.
>>> They both have 16 failover ip addresses. I have once tested the failover
>>> of the complete /28 block and - although there are costs involved - it
>>> works.
> Interesting, you have failover le full /28 block between server ?
> If yes, do you have done it manually ? or through the api ?
> (In the future, I would like to implemented auto failover with keepalived/vrrp or something like that)

I did it manually through the control panel. I have only 2 servers at 
OVH, but at that moment 3 as I was migrating from an old one to a new one.

So, I tested migrating the whole block from the new one to the old one 
(so that one hat 2 /28 blocks after migration) and back.


>
>
> ----- Mail original -----
> De: "Stephan Leemburg" <sleemburg@it-functions.nl>
> À: "Proxmox VE development discussion" <pve-devel@lists.proxmox.com>
> Envoyé: Samedi 22 Août 2020 18:01:16
> Objet: Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?
>
> Hi Alexandre,
>
> Sorry for the late reply.
>
> But actually, I do have 2 OVH based subscribed proxmox systems.
>
> They both have 16 failover ip addresses. I have once tested the failover
> of the complete /28 block and - although there are costs involved - it
> works.
>
> What would you like to test? If it does not disturb my production
> servers, then I think I can help you.
>
> Kind regards,
>
> Met vriendelijke groet,
> Stephan Leemburg
> IT Functions
>
> e: sleemburg@it-functions.nl
> p: +31 (0)71 889 23 33
> m: +31(0)6 83 22 30 69
> kvk: 27313647
>
> On 19-08-2020 08:57, Alexandre DERUMIER wrote:
>> Hi,
>>
>> I'm currently looking to test ip failover (single /32 ip or subnet range)
>> on public provider like hetzner or ovh.
>>
>> I have see a lot of users asking questions on the forum about routed setup.
>>
>> /32 is a bit tricky with point to point configuration,
>>
>> and I'll would like to implement them in sdn configuration (as I'm working on ip management).
>>
>>
>> I just need a small server, 1 single failover /32 ip and 1 small failover subnet.
>>
>>
>> If nobody can help, no problem, I'll rent a small server for 1 month.
>>
>>
>> Alexandre
>>
>>
>> (BTW: I'll try to send a new sdn patch series next week, I'm currently working on ip dns api registration)
>>
>>
>>
>> _______________________________________________
>> pve-devel mailing list
>> pve-devel@lists.proxmox.com
>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?

[Alexandre DERUMIER]

>>I did it manually through the control panel. I have only 2 servers at
>>OVH, but at that moment 3 as I was migrating from an old one to a new one.

>>So, I tested migrating the whole block from the new one to the old one
>>(so that one hat 2 /28 blocks after migration) and back.

Great :)

I'm looking to test bgp-evpn to replace vrack, and allow routing of a full /28 for example across multiple
nodes through internal routing, with auto failover of the gateway (through ovh api or other provider api).
(This will also allow vm migration between nodes with routed setup)

I'll work on it in coming months, I'm working on other sdn part currently.




----- Mail original -----
De: "Stephan Leemburg" <sleemburg@it-functions.nl>
À: "Proxmox VE development discussion" <pve-devel@lists.proxmox.com>
Envoyé: Mardi 25 Août 2020 09:49:19
Objet: Re: [pve-devel] does somebody have an hetzner or ovh server to do test ?

On 25-08-2020 09:28, Alexandre DERUMIER wrote: 
> Hi Stephan, 
> 
> Thanks for the help 
> 
>>> What would you like to test? If it does not disturb my production 
>>> servers, then I think I can help you. 
> I would like to do a lot of setup test, so I'll break your production ;) 

Oh, that would not be good ;-) 

> I'm going to test routed setup, but also bgp-evpn,etc... 
> I have a friend working at ovh, I'll try to have some server to test. 
Hopefully they will sponsor you. 
> but thanks anyway. 
> 
You're welcome. 
>>> They both have 16 failover ip addresses. I have once tested the failover 
>>> of the complete /28 block and - although there are costs involved - it 
>>> works. 
> Interesting, you have failover le full /28 block between server ? 
> If yes, do you have done it manually ? or through the api ? 
> (In the future, I would like to implemented auto failover with keepalived/vrrp or something like that) 

I did it manually through the control panel. I have only 2 servers at 
OVH, but at that moment 3 as I was migrating from an old one to a new one. 

So, I tested migrating the whole block from the new one to the old one 
(so that one hat 2 /28 blocks after migration) and back. 


> 
> 
> ----- Mail original ----- 
> De: "Stephan Leemburg" <sleemburg@it-functions.nl> 
> À: "Proxmox VE development discussion" <pve-devel@lists.proxmox.com> 
> Envoyé: Samedi 22 Août 2020 18:01:16 
> Objet: Re: [pve-devel] does somebody have an hetzner or ovh server to do test ? 
> 
> Hi Alexandre, 
> 
> Sorry for the late reply. 
> 
> But actually, I do have 2 OVH based subscribed proxmox systems. 
> 
> They both have 16 failover ip addresses. I have once tested the failover 
> of the complete /28 block and - although there are costs involved - it 
> works. 
> 
> What would you like to test? If it does not disturb my production 
> servers, then I think I can help you. 
> 
> Kind regards, 
> 
> Met vriendelijke groet, 
> Stephan Leemburg 
> IT Functions 
> 
> e: sleemburg@it-functions.nl 
> p: +31 (0)71 889 23 33 
> m: +31(0)6 83 22 30 69 
> kvk: 27313647 
> 
> On 19-08-2020 08:57, Alexandre DERUMIER wrote: 
>> Hi, 
>> 
>> I'm currently looking to test ip failover (single /32 ip or subnet range) 
>> on public provider like hetzner or ovh. 
>> 
>> I have see a lot of users asking questions on the forum about routed setup. 
>> 
>> /32 is a bit tricky with point to point configuration, 
>> 
>> and I'll would like to implement them in sdn configuration (as I'm working on ip management). 
>> 
>> 
>> I just need a small server, 1 single failover /32 ip and 1 small failover subnet. 
>> 
>> 
>> If nobody can help, no problem, I'll rent a small server for 1 month. 
>> 
>> 
>> Alexandre 
>> 
>> 
>> (BTW: I'll try to send a new sdn patch series next week, I'm currently working on ip dns api registration) 
>> 
>> 
>> 
>> _______________________________________________ 
>> pve-devel mailing list 
>> pve-devel@lists.proxmox.com 
>> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
>> 
> _______________________________________________ 
> pve-devel mailing list 
> pve-devel@lists.proxmox.com 
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 
> 
> 
> _______________________________________________ 
> pve-devel mailing list 
> pve-devel@lists.proxmox.com 
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel 

_______________________________________________ 
pve-devel mailing list 
pve-devel@lists.proxmox.com 
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel