Re: [pve-devel] [PATCH docs v2] pveceph: document cluster shutdown

[Aaron Lauterer <a.lauterer@proxmox.com>]

new v3 is available 
https://lists.proxmox.com/pipermail/pve-devel/2024-May/064009.html

On  2024-05-22  10:33, Aaron Lauterer wrote:
> Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
> ---
> changes since v1:
> * incorporated suggested changes in phrasing to fix grammar and
>    distinguish the steps on how to power down the nodes better
> 
>   pveceph.adoc | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 50 insertions(+)
> 
> diff --git a/pveceph.adoc b/pveceph.adoc
> index 089ac80..04bf462 100644
> --- a/pveceph.adoc
> +++ b/pveceph.adoc
> @@ -1080,6 +1080,56 @@ scrubs footnote:[Ceph scrubbing {cephdocs-url}/rados/configuration/osd-config-re
>   are executed.
>   
>   
> +[[pveceph_shutdown]]
> +Shutdown {pve} + Ceph HCI cluster
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +To shut down the whole {pve} + Ceph cluster, first stop all Ceph clients. This
> +will mainly be VMs and containers. If you have additional clients that might
> +access a Ceph FS or an installed RADOS GW, stop these as well.
> +Highly available guests will switch their state to 'stopped' when powered down
> +via the {pve} tooling.
> +
> +Once all clients, VMs and containers are off or not accessing the Ceph cluster
> +anymore, verify that the Ceph cluster is in a healthy state. Either via the Web UI
> +or the CLI:
> +
> +----
> +ceph -s
> +----
> +
> +Then enable the following OSD flags in the Ceph -> OSD panel or the CLI:
> +
> +----
> +ceph osd set noout
> +ceph osd set norecover
> +ceph osd set norebalance
> +ceph osd set nobackfill
> +ceph osd set nodown
> +ceph osd set pause
> +----
> +
> +This will halt all self-healing actions for Ceph and the 'pause' will stop any client IO.
> +
> +Start powering down your nodes without a monitor (MON). After these nodes are
> +down, continue shutting down hosts with monitors on them.
> +
> +When powering on the cluster, start the nodes with Monitors (MONs) first. Once
> +all nodes are up and running, confirm that all Ceph services are up and running
> +before you unset the OSD flags:
> +
> +----
> +ceph osd unset noout
> +ceph osd unset norecover
> +ceph osd unset norebalance
> +ceph osd unset nobackfill
> +ceph osd unset nodown
> +ceph osd unset pause
> +----
> +
> +You can now start up the guests. Highly available guests will change their state
> +to 'started' when they power on.
> +
>   Ceph Monitoring and Troubleshooting
>   -----------------------------------
>   


_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel