From: Stefan Hanreich <s.hanreich@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: Re: [PATCH proxmox-perl-rs 06/15] pve-rs: fabrics: assign network interfaces to configured VRFs
Date: Wed, 21 Oct 2026 18:14:14 +0200 [thread overview]
Message-ID: <85270a59-b3f8-4c23-868b-56c4dd5d0302@proxmox.com> (raw)
In-Reply-To: <20260821140404.322081-7-g.goller@proxmox.com>
On 8/21/26 4:04 PM, Gabriel Goller wrote:
> Add the VRF stanza to generated interface configuration when a fabric
> has a VRF. Apply it to dummy addresses, protocol interfaces, and BGP
> unnumbered interfaces so traffic enters the correct routing table.
>
> Fabrics without a VRF keep their existing configuration.
>
> Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
> ---
> pve-rs/src/bindings/sdn/fabrics.rs | 69 +++++++++++++++++++++++-------
> 1 file changed, 53 insertions(+), 16 deletions(-)
>
> diff --git a/pve-rs/src/bindings/sdn/fabrics.rs b/pve-rs/src/bindings/sdn/fabrics.rs
> index f96b6b1c656f..98470eeaa397 100644
> --- a/pve-rs/src/bindings/sdn/fabrics.rs
> +++ b/pve-rs/src/bindings/sdn/fabrics.rs
> @@ -582,8 +582,23 @@ pub mod pve_rs_sdn_fabrics {
> Ok(interface)
> }
>
> + pub(crate) fn fabric_vrf_name(fabric: &FabricEntry) -> Option<String> {
> + let zone = match fabric {
> + FabricEntry::Ospf(entry) => entry.fabric_section().properties().zone(),
> + FabricEntry::Bgp(entry) => entry.fabric_section().properties().zone(),
> + FabricEntry::Openfabric(_) | FabricEntry::WireGuard(_) => None,
> + };
> +
> + zone.map(|zone| format!("vrf_{zone}"))
> + }
> +
nit: maybe better as a method on the fabric config itself? Although I suppose it could be
argued that it's not the decision of the config how the VRF should be named.
> /// Helper function to generate the default `/etc/network/interfaces` config for a given CIDR.
> - fn render_interface(name: &str, cidr: Cidr, link_type: Option<&str>) -> Result<String, Error> {
> + fn render_interface(
> + name: &str,
> + cidr: Cidr,
> + link_type: Option<&str>,
> + vrf: Option<&str>,
> + ) -> Result<String, Error> {
> let mut interface = String::new();
>
> writeln!(interface, "auto {name}")?;
> @@ -595,6 +610,9 @@ pub mod pve_rs_sdn_fabrics {
> if let Some(link_type) = link_type {
> writeln!(interface, "\tlink-type {link_type}")?;
> }
> + if let Some(vrf) = vrf {
> + writeln!(interface, "\tvrf {vrf}")?;
> + }
> writeln!(interface, "\tip-forward 1")?;
>
> Ok(interface)
> @@ -604,12 +622,14 @@ pub mod pve_rs_sdn_fabrics {
> interfaces: &mut String,
> fabric: &Fabric,
> node: &ConfigNode,
> + vrf: Option<&str>,
> ) -> Result<(), Error> {
> if let Some(ip) = node.ip() {
> let interface = render_interface(
> &format!("dummy_{}", fabric.id()),
> Cidr::new_v4(ip, 32)?,
> Some("dummy"),
> + vrf,
> )?;
> writeln!(interfaces)?;
> write!(interfaces, "{interface}")?;
> @@ -620,6 +640,7 @@ pub mod pve_rs_sdn_fabrics {
> &format!("dummy_{}", fabric.id()),
> Cidr::new_v6(ip6, 128)?,
> Some("dummy"),
> + vrf,
> )?;
> writeln!(interfaces)?;
> write!(interfaces, "{interface}")?;
> @@ -637,28 +658,35 @@ pub mod pve_rs_sdn_fabrics {
> let config = this.fabric_config.lock().unwrap();
> let mut interfaces = String::new();
>
> - let node_fabrics = config.values().filter_map(|entry| {
> - entry
> - .get_node(&node_id)
> - .map(|node| (entry.fabric(), node))
> - .ok()
> - });
> + let node_fabrics = config
> + .values()
> + .filter_map(|entry| entry.get_node(&node_id).map(|node| (entry, node)).ok());
>
> - for (fabric, node) in node_fabrics {
> - render_dummy_interfaces(&mut interfaces, fabric, node)?;
> + for (entry, node) in node_fabrics {
> + let fabric = entry.fabric();
> + let vrf = fabric_vrf_name(entry);
> + render_dummy_interfaces(&mut interfaces, fabric, node, vrf.as_deref())?;
>
> match node {
> ConfigNode::Openfabric(node_section) => {
> for interface in node_section.properties().interfaces() {
> if let Some(ip) = interface.ip() {
> - let interface =
> - render_interface(interface.name(), Cidr::from(ip), None)?;
> + let interface = render_interface(
> + interface.name(),
> + Cidr::from(ip),
> + None,
> + vrf.as_deref(),
> + )?;
> writeln!(interfaces)?;
> write!(interfaces, "{interface}")?;
> }
> if let Some(ip) = interface.ip6() {
> - let interface =
> - render_interface(interface.name(), Cidr::from(ip), None)?;
> + let interface = render_interface(
> + interface.name(),
> + Cidr::from(ip),
> + None,
> + vrf.as_deref(),
> + )?;
> writeln!(interfaces)?;
> write!(interfaces, "{interface}")?;
> }
> @@ -675,7 +703,8 @@ pub mod pve_rs_sdn_fabrics {
> } else {
> anyhow::bail!("there has to be a ipv4 or ipv6 node address");
> });
> - let interface = render_interface(interface.name(), cidr, None)?;
> + let interface =
> + render_interface(interface.name(), cidr, None, vrf.as_deref())?;
> writeln!(interfaces)?;
> write!(interfaces, "{interface}")?;
> }
> @@ -685,8 +714,12 @@ pub mod pve_rs_sdn_fabrics {
> for interface in node_section.properties().interfaces() {
> writeln!(interfaces)?;
> if let Some(ip) = interface.ip() {
> - let interface =
> - render_interface(interface.name(), Cidr::from(ip), None)?;
> + let interface = render_interface(
> + interface.name(),
> + Cidr::from(ip),
> + None,
> + vrf.as_deref(),
> + )?;
> write!(interfaces, "{interface}")?;
> } else {
> let interface = render_interface(
> @@ -695,6 +728,7 @@ pub mod pve_rs_sdn_fabrics {
> anyhow::anyhow!("there has to be a ipv4 address")
> })?)),
> None,
> + vrf.as_deref(),
> )?;
> write!(interfaces, "{interface}")?;
> }
> @@ -762,6 +796,9 @@ pub mod pve_rs_sdn_fabrics {
> writeln!(interfaces)?;
> writeln!(interfaces, "auto {name}")?;
> writeln!(interfaces, "iface {name} inet manual")?;
> + if let Some(vrf) = &vrf {
> + writeln!(interfaces, "\tvrf {vrf}")?;
> + }
> writeln!(interfaces, "\tip-forward 1")?;
> writeln!(interfaces, "\tip6-forward 1")?;
> // BGP unnumbered uses RAs to discover peer link-local
next prev parent reply other threads:[~2026-10-21 16:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-21 14:03 [RFC manager/network/proxmox{-ve-rs,-perl-rs} 00/15] SDN VRF support Gabriel Goller
2026-08-21 14:03 ` [PATCH proxmox-ve-rs 01/15] frr: add VRF-aware OSPF rendering Gabriel Goller
2026-08-21 14:03 ` [PATCH proxmox-ve-rs 02/15] sdn: add zone references to OSPF and BGP fabrics Gabriel Goller
2026-08-21 14:03 ` [PATCH proxmox-ve-rs 03/15] sdn: generate fabric routing configuration in zone VRFs Gabriel Goller
2026-10-21 16:14 ` Stefan Hanreich
2026-08-21 14:03 ` [PATCH proxmox-ve-rs 04/15] sdn: fix VRF route-map scoping and zone ID validation Gabriel Goller
2026-08-21 14:03 ` [PATCH proxmox-ve-rs 05/15] tests: fabrics: add test for fabrics in VRFs Gabriel Goller
2026-08-21 14:03 ` [PATCH proxmox-perl-rs 06/15] pve-rs: fabrics: assign network interfaces to configured VRFs Gabriel Goller
2026-10-21 16:14 ` Stefan Hanreich [this message]
2026-08-21 14:03 ` [PATCH proxmox-perl-rs 07/15] pve-rs: fabrics: make per-fabric status queries VRF-aware Gabriel Goller
2026-10-21 16:14 ` Stefan Hanreich
2026-08-21 14:03 ` [PATCH proxmox-perl-rs 08/15] pve-rs: fabrics: include VRF routes in aggregate status Gabriel Goller
2026-08-21 14:03 ` [PATCH pve-network 09/15] sdn: add optional VRFs for simple zones Gabriel Goller
2026-08-21 14:03 ` [PATCH pve-network 10/15] sdn: allow fabrics to use simple zone VRFs Gabriel Goller
2026-08-21 14:03 ` [PATCH pve-network 11/15] sdn: always generate EVPN " Gabriel Goller
2026-08-21 14:03 ` [PATCH pve-network 12/15] api: sdn: allow EVPN zones as fabric VRFs Gabriel Goller
2026-08-21 14:03 ` [PATCH pve-network 13/15] api: sdn: disallow BGP fabrics in EVPN zone VRFs Gabriel Goller
2026-08-21 14:03 ` [PATCH pve-manager 14/15] ui: sdn: add VRF zone selection for fabrics Gabriel Goller
2026-08-21 14:03 ` [PATCH pve-manager 15/15] ui: sdn: expose EVPN zones as fabric VRFs Gabriel Goller
2026-10-21 9:38 ` [RFC manager/network/proxmox{-ve-rs,-perl-rs} 00/15] SDN VRF support Gabriel Goller
2026-10-21 16:13 ` Stefan Hanreich
-- strict thread matches above, loose matches on Subject: below --
2026-10-21 9:36 [PATCH " Gabriel Goller
2026-10-21 9:36 ` [PATCH proxmox-perl-rs 06/15] pve-rs: fabrics: assign network interfaces to configured VRFs Gabriel Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=85270a59-b3f8-4c23-868b-56c4dd5d0302@proxmox.com \
--to=s.hanreich@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox