From: Hannes Laimer <h.laimer@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: superseded: [PATCH manager/network/proxmox{-ve-rs,-perl-rs} 0/6] sdn: add BGP fabric
Date: Wed, 15 Apr 2026 13:13:46 +0200 [thread overview]
Message-ID: <62557db4-bad7-49f9-be01-4f13faec93cd@proxmox.com> (raw)
In-Reply-To: <20260327151031.149360-1-h.laimer@proxmox.com>
superseded-by:
https://lore.proxmox.com/pve-devel/20260415111134.124720-1-h.laimer@proxmox.com/
On 2026-03-27 16:10, Hannes Laimer wrote:
> This patch series adds BGP as a third fabric protocol alongside OpenFabric
> and OSPF. It targets eBGP unnumbered underlays where each node has a unique
> ASN and peers over physical interfaces without IP assignment on fabric links.
>
> ## eBGP underlay
>
> Each node gets its own ASN (e.g. 65001, 65002, 65003) and peers with its
> neighbors using 'remote-as external' on unnumbered interfaces. The fabric
> peer-group is named after the fabric ID and uses BFD when enabled.
>
> ## EVPN overlay
>
> When the EVPN controller references a BGP fabric, the overlay sessions run
> as eBGP too. The node's fabric ASN becomes the 'router bgp' process ASN.
> Since every node has a different ASN, auto-derived route targets would differ
> per node, so the EVPN controller ASN is used via 'autort as' to produce
> uniform RTs. This relies on a patch we ship with our frr, upstream
> reference: [1]. Two additional flags are enabled:
> 'bestpath as-path multipath-relax' for ECMP across different ASNs, and
> 'disable-ebgp-connected-route-check' for loopback-based VTEP peers.
>
> An iBGP overlay using 'local-as' was considered but rejected due to a
> limitation in how FRR handles hop limits. See the EVPN commit message for
> details.
>
> ## Single BGP process
>
> Unlike OSPF and OpenFabric which have their own FRR protocol blocks, BGP
> fabric config must coexist with the EVPN BGP config in one 'router bgp'
> instance. The fabric generates its own BgpRouter and merges it into the
> existing one via merge_fabric(), appending neighbor groups and address
> families without overwriting the EVPN settings.
>
>
> Thanks a lot @Stefan for the base of this series!
>
>
> [1] https://github.com/FRRouting/frr/issues/17945
>
>
>
> proxmox-ve-rs:
>
> Hannes Laimer (1):
> sdn: fabric: add BGP protocol support
>
> proxmox-frr/src/ser/bgp.rs | 66 +++++
> proxmox-frr/src/ser/mod.rs | 1 +
> proxmox-ve-config/src/sdn/fabric/frr.rs | 258 ++++++++++++++++-
> proxmox-ve-config/src/sdn/fabric/mod.rs | 100 +++++++
> .../src/sdn/fabric/section_config/fabric.rs | 22 ++
> .../src/sdn/fabric/section_config/mod.rs | 19 ++
> .../src/sdn/fabric/section_config/node.rs | 21 ++
> .../sdn/fabric/section_config/protocol/bgp.rs | 266 ++++++++++++++++++
> .../sdn/fabric/section_config/protocol/mod.rs | 1 +
> .../tests/fabric/cfg/bgp_default/fabrics.cfg | 17 ++
> .../fabric/cfg/bgp_ipv6_only/fabrics.cfg | 17 ++
> proxmox-ve-config/tests/fabric/main.rs | 58 ++++
> .../snapshots/fabric__bgp_default_pve.snap | 28 ++
> .../snapshots/fabric__bgp_default_pve1.snap | 27 ++
> .../snapshots/fabric__bgp_ipv6_only_pve.snap | 29 ++
> .../snapshots/fabric__bgp_ipv6_only_pve1.snap | 28 ++
> 16 files changed, 955 insertions(+), 3 deletions(-)
> create mode 100644 proxmox-ve-config/src/sdn/fabric/section_config/protocol/bgp.rs
> create mode 100644 proxmox-ve-config/tests/fabric/cfg/bgp_default/fabrics.cfg
> create mode 100644 proxmox-ve-config/tests/fabric/cfg/bgp_ipv6_only/fabrics.cfg
> create mode 100644 proxmox-ve-config/tests/fabric/snapshots/fabric__bgp_default_pve.snap
> create mode 100644 proxmox-ve-config/tests/fabric/snapshots/fabric__bgp_default_pve1.snap
> create mode 100644 proxmox-ve-config/tests/fabric/snapshots/fabric__bgp_ipv6_only_pve.snap
> create mode 100644 proxmox-ve-config/tests/fabric/snapshots/fabric__bgp_ipv6_only_pve1.snap
>
>
> proxmox-perl-rs:
>
> Hannes Laimer (2):
> sdn: fabrics: add BGP config generation
> sdn: fabrics: add BGP status endpoints
>
> pve-rs/src/bindings/sdn/fabrics.rs | 100 +++++++++++++++++++++++++++
> pve-rs/src/sdn/status.rs | 105 ++++++++++++++++++++++++++++-
> 2 files changed, 203 insertions(+), 2 deletions(-)
>
>
> pve-network:
>
> Hannes Laimer (2):
> sdn: fabrics: register bgp as a fabric protocol type
> sdn: evpn: support eBGP EVPN over BGP fabric underlay
>
> src/PVE/Network/SDN/Controllers/EvpnPlugin.pm | 40 ++++++++-
> src/PVE/Network/SDN/Fabrics.pm | 18 +++-
> .../bgp_fabric/expected_controller_config | 73 ++++++++++++++++
> .../evpn/bgp_fabric/expected_sdn_interfaces | 56 ++++++++++++
> src/test/zones/evpn/bgp_fabric/interfaces | 6 ++
> src/test/zones/evpn/bgp_fabric/sdn_config | 85 +++++++++++++++++++
> 6 files changed, 275 insertions(+), 3 deletions(-)
> create mode 100644 src/test/zones/evpn/bgp_fabric/expected_controller_config
> create mode 100644 src/test/zones/evpn/bgp_fabric/expected_sdn_interfaces
> create mode 100644 src/test/zones/evpn/bgp_fabric/interfaces
> create mode 100644 src/test/zones/evpn/bgp_fabric/sdn_config
>
>
> pve-manager:
>
> Hannes Laimer (1):
> ui: sdn: add BGP fabric support
>
> www/manager6/Makefile | 3 ++
> www/manager6/sdn/FabricsView.js | 12 +++++
> www/manager6/sdn/fabrics/NodeEdit.js | 1 +
> www/manager6/sdn/fabrics/bgp/FabricEdit.js | 52 +++++++++++++++++++
> .../sdn/fabrics/bgp/InterfacePanel.js | 15 ++++++
> www/manager6/sdn/fabrics/bgp/NodeEdit.js | 32 ++++++++++++
> 6 files changed, 115 insertions(+)
> create mode 100644 www/manager6/sdn/fabrics/bgp/FabricEdit.js
> create mode 100644 www/manager6/sdn/fabrics/bgp/InterfacePanel.js
> create mode 100644 www/manager6/sdn/fabrics/bgp/NodeEdit.js
>
>
> Summary over all repositories:
> 30 files changed, 1548 insertions(+), 8 deletions(-)
>
prev parent reply other threads:[~2026-04-15 11:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-27 15:10 Hannes Laimer
2026-03-27 15:10 ` [PATCH proxmox-ve-rs 1/1] sdn: fabric: add BGP protocol support Hannes Laimer
2026-03-27 15:10 ` [PATCH proxmox-perl-rs 1/2] sdn: fabrics: add BGP config generation Hannes Laimer
2026-03-27 15:10 ` [PATCH proxmox-perl-rs 2/2] sdn: fabrics: add BGP status endpoints Hannes Laimer
2026-03-27 15:10 ` [PATCH pve-network 1/2] sdn: fabrics: register bgp as a fabric protocol type Hannes Laimer
2026-03-27 15:10 ` [PATCH pve-network 2/2] sdn: evpn: support eBGP EVPN over BGP fabric underlay Hannes Laimer
2026-03-27 15:10 ` [PATCH pve-manager 1/1] ui: sdn: add BGP fabric support Hannes Laimer
2026-04-15 11:13 ` Hannes Laimer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=62557db4-bad7-49f9-be01-4f13faec93cd@proxmox.com \
--to=h.laimer@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox