public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
* [pve-devel] [PATCH container] setup: Fix architecture detection for NixOS containers
@ 2023-02-28 10:59 Christoph Heiss
  2023-07-03 10:00 ` Christoph Heiss
  2023-08-21 12:50 ` Fiona Ebner
  0 siblings, 2 replies; 4+ messages in thread
From: Christoph Heiss @ 2023-02-28 10:59 UTC (permalink / raw)
  To: pve-devel

NixOS is special and deviates in many places from a "standard" Linux
system. In this case, /bin/sh does not exist on the actual filesystem,
at least not before the initial activation - which creates a symlink at
/bin/sh.

Thus try a bit harder to detect the architecture for NixOS containers by
inspecting the init script, which contains a shebang-line with the full
path to the system shell.

This moves the architecture detection code to the end of the container
creation lifecycle, so that it can be implemented as a plugin
subroutine. Therefore this mechanism is now generic enough that it can
be adapted to other container OS's in the future if needed. AFAICS
`arch` is only used when writing the actual LXC config, so determining
it later during creation does not change anything.

Tested by creating a NixOS and a Debian container (to verify that
nothing regressed) and checking if the warning "Architecure detection
failed: [..]" no longer appears for the NixOS CT and if  `arch` in the
CT config is correct. Also tested restoring both containers from a local
and a PBS backup, as well as migrating both container.

Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
---
 src/PVE/LXC/Create.pm       | 76 -------------------------------------
 src/PVE/LXC/Setup.pm        | 64 +++++++++++++++++++++++++++++++
 src/PVE/LXC/Setup/Base.pm   |  8 ++++
 src/PVE/LXC/Setup/NixOS.pm  | 17 +++++++++
 src/PVE/LXC/Setup/Plugin.pm |  5 +++
 5 files changed, 94 insertions(+), 76 deletions(-)

diff --git a/src/PVE/LXC/Create.pm b/src/PVE/LXC/Create.pm
index b2e3d00..adf917c 100644
--- a/src/PVE/LXC/Create.pm
+++ b/src/PVE/LXC/Create.pm
@@ -16,72 +16,6 @@ use PVE::VZDump::ConvertOVZ;
 use PVE::Tools;
 use POSIX;
 
-sub detect_architecture {
-    my ($rootdir) = @_;
-
-    # see https://en.wikipedia.org/wiki/Executable_and_Linkable_Format
-
-    my $supported_elf_machine = {
-	0x03 => 'i386',
-	0x3e => 'amd64',
-	0x28 => 'armhf',
-	0xb7 => 'arm64',
-	0xf3 => 'riscv',
-    };
-
-    my $elf_fn = '/bin/sh'; # '/bin/sh' is POSIX mandatory
-    my $detect_arch = sub {
-	# chroot avoids a problem where we check the binary of the host system
-	# if $elf_fn is an absolut symlink (e.g. $rootdir/bin/sh -> /bin/bash)
-	chroot($rootdir) or die "chroot '$rootdir' failed: $!\n";
-	chdir('/') or die "failed to change to root directory\n";
-
-	open(my $fh, "<", $elf_fn) or die "open '$elf_fn' failed: $!\n";
-	binmode($fh);
-
-	my $length = read($fh, my $data, 20) or die "read failed: $!\n";
-
-	# 4 bytes ELF magic number and 1 byte ELF class, padding, machine
-	my ($magic, $class, undef, $machine) = unpack("A4CA12n", $data);
-
-	die "'$elf_fn' does not resolve to an ELF!\n"
-	    if (!defined($class) || !defined($magic) || $magic ne "\177ELF");
-
-	my $arch = $supported_elf_machine->{$machine};
-	die "'$elf_fn' has unknown ELF machine '$machine'!\n"
-	    if !defined($arch);
-
-	if ($arch eq 'riscv') {
-	    if ($class eq 1) {
-		$arch = 'riscv32';
-	    } elsif ($class eq 2) {
-		$arch = 'riscv64';
-	    } else {
-		die "'$elf_fn' has invalid class '$class'!\n";
-	    }
-	}
-
-	return $arch;
-    };
-
-    my $arch = eval { PVE::Tools::run_fork_with_timeout(10, $detect_arch); };
-    my $err = $@;
-
-    if (!defined($arch) && !defined($err)) {
-	# on timeout
-	die "Architecture detection failed: timeout\n";
-    } elsif ($err) {
-	# any other error
-	$arch = 'amd64';
-	print "Architecture detection failed: $err\nFalling back to $arch.\n" .
-	      "Use `pct set VMID --arch ARCH` to change.\n";
-    } else {
-	print "Detected container architecture: $arch\n";
-    }
-
-    return $arch;
-}
-
 sub restore_archive {
     my ($storage_cfg, $archive, $rootdir, $conf, $no_unpack_error, $bwlimit) = @_;
 
@@ -118,11 +52,6 @@ sub restore_proxmox_backup_archive {
 
     PVE::Storage::PBSPlugin::run_raw_client_cmd(
 	$scfg, $storeid, $cmd, $param, userns_cmd => $userns_cmd);
-
-    # if arch is set, we do not try to autodetect it
-    return if defined($conf->{arch});
-
-    $conf->{arch} = detect_architecture($rootdir);
 }
 
 sub restore_tar_archive {
@@ -183,11 +112,6 @@ sub restore_tar_archive {
     my $err = $@;
     close($archive_fh) if defined $archive_fh;
     die $err if $err && !$no_unpack_error;
-
-    # if arch is set, we do not try to autodetect it
-    return if defined($conf->{arch});
-
-    $conf->{arch} = detect_architecture($rootdir);
 }
 
 sub recover_config {
diff --git a/src/PVE/LXC/Setup.pm b/src/PVE/LXC/Setup.pm
index 891231f..4346c5e 100644
--- a/src/PVE/LXC/Setup.pm
+++ b/src/PVE/LXC/Setup.pm
@@ -131,6 +131,20 @@ sub new {
 	$plugin->{rootgid} = $rootgid;
     }
 
+    # if arch is unset, we try to autodetect it
+    if (!defined($conf->{arch})) {
+	my $arch = eval { $self->protected_call(sub { $plugin->detect_architecture() }) };
+
+	if (!defined($arch)) {
+	    $arch = 'amd64';
+	    print "Falling back to $arch.\nUse `pct set VMID --arch ARCH` to change.\n";
+	} else {
+	    print "Detected container architecture: $arch\n";
+	}
+
+	$conf->{arch} = $arch;
+    }
+
     return $self;
 }
 
@@ -346,4 +360,54 @@ sub get_ct_init_path {
     return $init;
 }
 
+sub detect_architecture {
+    my ($elf_fn) = @_;
+
+    # see https://en.wikipedia.org/wiki/Executable_and_Linkable_Format
+
+    my $supported_elf_machine = {
+	0x03 => 'i386',
+	0x3e => 'amd64',
+	0x28 => 'armhf',
+	0xb7 => 'arm64',
+	0xf3 => 'riscv',
+    };
+
+    my $detect_arch = sub {
+	open(my $fh, "<", $elf_fn) or die "open '$elf_fn' failed: $!\n";
+	binmode($fh);
+
+	my $length = read($fh, my $data, 20) or die "read failed: $!\n";
+
+	# 4 bytes ELF magic number and 1 byte ELF class, padding, machine
+	my ($magic, $class, undef, $machine) = unpack("A4CA12n", $data);
+
+	die "'$elf_fn' does not resolve to an ELF!\n"
+	    if (!defined($class) || !defined($magic) || $magic ne "\177ELF");
+
+	my $arch = $supported_elf_machine->{$machine};
+	die "'$elf_fn' has unknown ELF machine '$machine'!\n"
+	    if !defined($arch);
+
+	if ($arch eq 'riscv') {
+	    if ($class eq 1) {
+		$arch = 'riscv32';
+	    } elsif ($class eq 2) {
+		$arch = 'riscv64';
+	    } else {
+		die "'$elf_fn' has invalid class '$class'!\n";
+	    }
+	}
+
+	return $arch;
+    };
+
+    my $arch = eval { PVE::Tools::run_fork_with_timeout(10, $detect_arch); };
+    my $err = $@ // "timeout\n";
+
+    die "Architecture detection failed: $err" if !defined($arch);
+
+    return $arch;
+}
+
 1;
diff --git a/src/PVE/LXC/Setup/Base.pm b/src/PVE/LXC/Setup/Base.pm
index 547abdb..93c1d34 100644
--- a/src/PVE/LXC/Setup/Base.pm
+++ b/src/PVE/LXC/Setup/Base.pm
@@ -18,6 +18,7 @@ use PVE::INotify;
 use PVE::Tools;
 use PVE::Network;
 
+use PVE::LXC::Setup;
 use PVE::LXC::Setup::Plugin;
 use base qw(PVE::LXC::Setup::Plugin);
 
@@ -574,6 +575,13 @@ sub ssh_host_key_types_to_generate {
     };
 }
 
+sub detect_architecture {
+    my ($self) = @_;
+
+    # '/bin/sh' is POSIX mandatory
+    return PVE::LXC::Setup::detect_architecture('/bin/sh');
+}
+
 sub pre_start_hook {
     my ($self, $conf) = @_;
 
diff --git a/src/PVE/LXC/Setup/NixOS.pm b/src/PVE/LXC/Setup/NixOS.pm
index 845d2d5..4f7b93e 100644
--- a/src/PVE/LXC/Setup/NixOS.pm
+++ b/src/PVE/LXC/Setup/NixOS.pm
@@ -5,6 +5,7 @@ use warnings;
 
 use File::Path 'make_path';
 
+use PVE::LXC::Setup;
 use PVE::LXC::Setup::Base;
 
 use base qw(PVE::LXC::Setup::Base);
@@ -37,4 +38,20 @@ sub setup_init {
     my ($self, $conf) = @_;
 }
 
+sub detect_architecture {
+    my ($self) = @_;
+
+    # /bin/sh only exists as a symlink after the initial system activaction on first boot.
+    # To detect the actual architecture of the system, examine the shebang line of the /sbin/init
+    # script, which has the full path to the system shell.
+    my $init_path = '/sbin/init';
+    open(my $fh, '<', $init_path) or die "open '$init_path' failed: $!\n";
+
+    if (<$fh> =~ /^#! ?(\S*)/) {
+	return PVE::LXC::Setup::detect_architecture($1);
+    }
+
+    die "Architecture detection failed: could not find a shell\n";
+}
+
 1;
diff --git a/src/PVE/LXC/Setup/Plugin.pm b/src/PVE/LXC/Setup/Plugin.pm
index 3d968e7..b9d9c2d 100644
--- a/src/PVE/LXC/Setup/Plugin.pm
+++ b/src/PVE/LXC/Setup/Plugin.pm
@@ -62,6 +62,11 @@ sub ssh_host_key_types_to_generate {
     croak "implement me in sub-class\n";
 }
 
+sub detect_architecture {
+    my ($self) = @_;
+    croak "implement me in sub-class\n";
+}
+
 # hooks
 
 sub pre_start_hook {
-- 
2.39.2





^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2023-08-22 12:36 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-28 10:59 [pve-devel] [PATCH container] setup: Fix architecture detection for NixOS containers Christoph Heiss
2023-07-03 10:00 ` Christoph Heiss
2023-08-21 12:50 ` Fiona Ebner
2023-08-22 12:35   ` Christoph Heiss

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal