From: Hannes Laimer <h.laimer@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: superseded: [PATCH pve-network v2] sdn: push mapping changes from the ipam API to the dhcp backend
Date: Wed, 9 Sep 2026 12:47:37 +0200 [thread overview]
Message-ID: <31c24744-0b7a-40df-90ca-1c7a9697b1e7@proxmox.com> (raw)
In-Reply-To: <20260905092106.10567-1-h.laimer@proxmox.com>
superseded-by:
https://lore.proxmox.com/pve-devel/20260909104144.1110031-1-h.laimer@proxmox.com/T/#m344301ba0d2a23f23715a1ce7a5c0aa3cbc6da16
On 2026-09-05 11:21, Hannes Laimer wrote:
> Mapping edits through the API only wrote the IPAM record and the
> cache, the dhcp backend was never told, so dnsmasq kept serving
> stale reservations until a later guest start in the zone happened
> to sweep them. The same held for a guest whose NIC moved to another
> bridge, the old records were released and new ones allocated without
> the backend hearing of either.
>
> Push the MAC's current answer after every record change, removing
> the old reservation first, since a re-add alone leaves a stale
> address behind when only one of the MAC's two addresses was
> deleted. The push is best effort, the record write stays
> authoritative. Mapping removal was dispatched to the plugins but
> implemented nowhere and never called, add the dnsmasq
> implementation for it.
>
> Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
> ---
>
> v2:
> - one push helper in the dhcp dispatcher instead of the push repeated
> in the ips API handlers
> - the guest allocation and release paths push too, so a bridge change
> on a running guest reaches the backend
> - a guest start pushes once, only for what it allocated
> - the update goes through a plugin hook, remove then add stays the
> default for dnsmasq
>
> src/PVE/API2/Network/SDN/Ips.pm | 7 +++++++
> src/PVE/Network/SDN/Dhcp.pm | 21 +++++++++++++++++++
> src/PVE/Network/SDN/Dhcp/Dnsmasq.pm | 32 ++++++++++++++++++++++++++++-
> src/PVE/Network/SDN/Dhcp/Plugin.pm | 13 ++++++++++++
> src/PVE/Network/SDN/Vnets.pm | 17 ++++++++++-----
> 5 files changed, 84 insertions(+), 6 deletions(-)
>
> diff --git a/src/PVE/API2/Network/SDN/Ips.pm b/src/PVE/API2/Network/SDN/Ips.pm
> index 5ff05e7..d7b682d 100644
> --- a/src/PVE/API2/Network/SDN/Ips.pm
> +++ b/src/PVE/API2/Network/SDN/Ips.pm
> @@ -46,6 +46,8 @@ __PACKAGE__->register_method({
> eval { PVE::Network::SDN::Vnets::del_ip($vnet, $ip, '', $mac); };
> die "$@\n" if $@;
>
> + PVE::Network::SDN::Dhcp::update_mapping($vnet, $mac);
> +
> return undef;
> },
> });
> @@ -82,6 +84,8 @@ __PACKAGE__->register_method({
>
> PVE::Network::SDN::Vnets::add_ip($vnet, $ip, '', $mac, undef);
>
> + PVE::Network::SDN::Dhcp::update_mapping($vnet, $mac);
> +
> return undef;
> },
> });
> @@ -132,6 +136,9 @@ __PACKAGE__->register_method({
> }
>
> die "$error\n" if $error;
> +
> + PVE::Network::SDN::Dhcp::update_mapping($vnet, $mac);
> +
> return undef;
> },
> });
> diff --git a/src/PVE/Network/SDN/Dhcp.pm b/src/PVE/Network/SDN/Dhcp.pm
> index 65e40d4..a9459b4 100644
> --- a/src/PVE/Network/SDN/Dhcp.pm
> +++ b/src/PVE/Network/SDN/Dhcp.pm
> @@ -55,6 +55,27 @@ sub remove_mapping {
> $dhcp_plugin->del_ip_mapping($zoneid, $mac);
> }
>
> +# re-apply a MAC's mapping on this node from the current records, best
> +# effort, the record write stays authoritative
> +sub update_mapping {
> + my ($vnetid, $mac) = @_;
> +
> + eval {
> + my $vnet = PVE::Network::SDN::Vnets::get_vnet($vnetid);
> + return if !$vnet;
> +
> + my $zoneid = $vnet->{zone};
> + my $zone = PVE::Network::SDN::Zones::get_zone($zoneid);
> + return if !$zone->{ipam} || !$zone->{dhcp};
> +
> + my ($ip4, $ip6) = PVE::Network::SDN::Vnets::get_ips_from_mac($vnetid, $mac);
> + my $macdb = PVE::Network::SDN::Ipams::read_macdb();
> + my $dhcp_plugin = PVE::Network::SDN::Dhcp::Plugin->lookup($zone->{dhcp});
> + $dhcp_plugin->update_ip_mapping($zoneid, $macdb, $mac, $ip4, $ip6);
> + };
> + warn "could not update dhcp mapping for $mac: $@" if $@;
> +}
> +
> sub regenerate_config {
> my ($reload) = @_;
>
> diff --git a/src/PVE/Network/SDN/Dhcp/Dnsmasq.pm b/src/PVE/Network/SDN/Dhcp/Dnsmasq.pm
> index 477b700..4677330 100644
> --- a/src/PVE/Network/SDN/Dhcp/Dnsmasq.pm
> +++ b/src/PVE/Network/SDN/Dhcp/Dnsmasq.pm
> @@ -6,7 +6,7 @@ use warnings;
> use base qw(PVE::Network::SDN::Dhcp::Plugin);
>
> use Net::IP qw(:PROC);
> -use PVE::Tools qw(file_set_contents run_command lock_file);
> +use PVE::Tools qw(file_get_contents file_set_contents run_command lock_file);
>
> use File::Copy;
> use Net::DBus;
> @@ -136,6 +136,36 @@ sub add_ip_mapping {
> update_lease($dhcpid, $ip4, $mac);
> }
>
> +sub del_ip_mapping {
> + my ($class, $dhcpid, $mac) = @_;
> +
> + my $ethers_file = ethers_file($dhcpid);
> +
> + my $reload = undef;
> +
> + my $removeFn = sub {
> + my @lines = split(/\n/, file_get_contents($ethers_file));
> + my @remaining = grep {
> + my ($parsed_mac) = split(/,/, $_);
> + !defined($parsed_mac) || $parsed_mac ne $mac;
> + } @lines;
> +
> + return if scalar(@remaining) == scalar(@lines);
> +
> + file_set_contents($ethers_file, join("\n", @remaining) . "\n", 0644);
> + $reload = 1;
> + };
> +
> + PVE::Tools::lock_file($ethers_file, 10, $removeFn);
> +
> + if ($@) {
> + warn "Unable to remove $mac from the dnsmasq configuration: $@\n";
> + return;
> + }
> +
> + systemctl_service('reload', "dnsmasq\@$dhcpid") if $reload;
> +}
> +
> sub configure_subnet {
> my ($class, $config, $dhcpid, $vnetid, $subnet_config) = @_;
>
> diff --git a/src/PVE/Network/SDN/Dhcp/Plugin.pm b/src/PVE/Network/SDN/Dhcp/Plugin.pm
> index b5d32fa..659c938 100644
> --- a/src/PVE/Network/SDN/Dhcp/Plugin.pm
> +++ b/src/PVE/Network/SDN/Dhcp/Plugin.pm
> @@ -27,6 +27,19 @@ sub add_ip_mapping {
> die 'implement in sub class';
> }
>
> +sub del_ip_mapping {
> + my ($class, $dhcpid, $mac) = @_;
> + die 'implement in sub class';
> +}
> +
> +# the MAC's records changed, make the backend serve the current ones
> +sub update_ip_mapping {
> + my ($class, $dhcpid, $macdb, $mac, $ip4, $ip6) = @_;
> +
> + $class->del_ip_mapping($dhcpid, $mac);
> + $class->add_ip_mapping($dhcpid, $macdb, $mac, $ip4, $ip6) if $ip4 || $ip6;
> +}
> +
> sub configure_range {
> my ($class, $config, $dhcpid, $vnetid, $subnet_config, $range_config) = @_;
> die 'implement in sub class';
> diff --git a/src/PVE/Network/SDN/Vnets.pm b/src/PVE/Network/SDN/Vnets.pm
> index c327a4b..daf6654 100644
> --- a/src/PVE/Network/SDN/Vnets.pm
> +++ b/src/PVE/Network/SDN/Vnets.pm
> @@ -154,6 +154,8 @@ sub add_next_free_cidr {
> die "can't find any free ip in zone $zoneid for IPv$ipversion";
> }
> }
> +
> + PVE::Network::SDN::Dhcp::update_mapping($vnetid, $mac) if %$ips;
> }
>
> sub add_ip {
> @@ -211,6 +213,8 @@ sub del_ips_from_mac {
> PVE::Network::SDN::Vnets::del_ip($vnetid, $ip4, $hostname, $mac) if $ip4;
> PVE::Network::SDN::Vnets::del_ip($vnetid, $ip6, $hostname, $mac) if $ip6;
>
> + PVE::Network::SDN::Dhcp::update_mapping($vnetid, $mac) if $ip4 || $ip6;
> +
> return ($ip4, $ip6);
> }
>
> @@ -224,12 +228,15 @@ sub add_dhcp_mapping {
>
> return if !$zone->{ipam} || !$zone->{dhcp};
>
> + # an allocation pushes the mapping itself, a guest whose records exist
> + # already has to be pushed here
> my ($ip4, $ip6) = PVE::Network::SDN::Vnets::get_ips_from_mac($vnetid, $mac);
> - add_next_free_cidr($vnetid, $name, $mac, "$vmid", undef, 1, 4) if !$ip4;
> - add_next_free_cidr($vnetid, $name, $mac, "$vmid", undef, 1, 6) if !$ip6;
> -
> - ($ip4, $ip6) = PVE::Network::SDN::Vnets::get_ips_from_mac($vnetid, $mac);
> - PVE::Network::SDN::Dhcp::add_mapping($vnetid, $mac, $ip4, $ip6) if $ip4 || $ip6;
> + if (!$ip4 || !$ip6) {
> + add_next_free_cidr($vnetid, $name, $mac, "$vmid", undef, 1, 4) if !$ip4;
> + add_next_free_cidr($vnetid, $name, $mac, "$vmid", undef, 1, 6) if !$ip6;
> + } else {
> + PVE::Network::SDN::Dhcp::update_mapping($vnetid, $mac);
> + }
> }
>
> 1;
prev parent reply other threads:[~2026-09-09 10:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-05 9:21 [PATCH pve-network v2] sdn: push mapping changes from the ipam API to the dhcp backend Hannes Laimer
2026-09-09 10:47 ` Hannes Laimer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=31c24744-0b7a-40df-90ca-1c7a9697b1e7@proxmox.com \
--to=h.laimer@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox