From: Stefan Hanreich <s.hanreich@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH proxmox-firewall 06/14] firewall: apply vnet rules to host traffic from vnets in a VRF
Date: Thu, 19 Nov 2026 20:45:38 +0100 [thread overview]
Message-ID: <20261119194547.674512-7-s.hanreich@proxmox.com> (raw)
In-Reply-To: <20261119194547.674512-1-s.hanreich@proxmox.com>
The vnet firewall checks traffic from guests to the host by looking up
the input interface in the bridge map. For a vnet in a VRF, such as the
vnets of EVPN zones, the input interface of locally delivered traffic
is the VRF device, so the lookup never matched and the vnet rules for
traffic towards the host were silently skipped.
Additionally look up the slave device, which holds the bridge the
packet arrived on for traffic received in a VRF and is unset otherwise.
This only adds verdicts in a chain that runs before the host input
chain, so traffic that was allowed by the host rules before can now
be dropped by the vnet rules. With a restrictive forward policy on such
a vnet, traffic to the gateway, e.g. ICMP, needs to be allowed
explicitly, as for vnets outside a VRF.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
---
proxmox-firewall/resources/proxmox-firewall.nft | 3 +++
1 file changed, 3 insertions(+)
diff --git a/proxmox-firewall/resources/proxmox-firewall.nft b/proxmox-firewall/resources/proxmox-firewall.nft
index 265ed80..2675727 100644
--- a/proxmox-firewall/resources/proxmox-firewall.nft
+++ b/proxmox-firewall/resources/proxmox-firewall.nft
@@ -240,6 +240,9 @@ table inet proxmox-firewall {
chain host-bridge-input {
type filter hook input priority filter - 1; policy accept;
meta iifname vmap @bridge-map
+ # traffic received in a VRF has the VRF device as input interface, the bridge it
+ # arrived on is the slave device
+ meta sdifname vmap @bridge-map
}
chain host-bridge-output {
--
2.47.3
next prev parent reply other threads:[~2026-11-19 19:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 19:45 [PATCH docs/manager/network/proxmox{,-ve-rs,-firewall} 00/14] sdn: conntrack zones and SNAT for simple zones with a dedicated VRF Stefan Hanreich
2026-11-19 19:45 ` [PATCH proxmox 01/14] network-api: expose the master device of a link Stefan Hanreich
2026-11-19 19:45 ` [PATCH proxmox-ve-rs 02/14] sdn: config: read the conntrack zone of zones with a dedicated VRF Stefan Hanreich
2026-11-19 19:45 ` [PATCH proxmox-ve-rs 03/14] sdn: conntrack: map the interfaces of zone VRFs to their conntrack zone Stefan Hanreich
2026-11-19 19:45 ` [PATCH pve-network 04/14] sdn: simple: SNAT via the uplinks of zone VRFs Stefan Hanreich
2026-11-19 19:45 ` [PATCH pve-network 05/14] sdn: zones: assign a conntrack zone to zones with a dedicated VRF Stefan Hanreich
2026-11-19 19:45 ` Stefan Hanreich [this message]
2026-11-19 19:45 ` [PATCH proxmox-firewall 07/14] nftables: expression: add a constructor for map lookups Stefan Hanreich
2026-11-19 19:45 ` [PATCH proxmox-firewall 08/14] nftables: statement: add a helper for setting the conntrack zone Stefan Hanreich
2026-11-19 19:45 ` [PATCH proxmox-firewall 09/14] nftables: expression: convert the conntrack zones of zone VRFs Stefan Hanreich
2026-11-19 19:45 ` [PATCH proxmox-firewall 10/14] firewall: add a command applying " Stefan Hanreich
2026-11-19 19:45 ` [PATCH proxmox-firewall 11/14] firewall: put guest traffic of zone VRFs into their conntrack zone Stefan Hanreich
2026-11-19 19:45 ` [PATCH pve-manager 12/14] network: apply the conntrack zones of zone VRFs Stefan Hanreich
2026-11-19 19:45 ` [PATCH pve-manager 13/14] network: warn if pve-firewall cannot isolate guests in " Stefan Hanreich
2026-11-19 19:45 ` [PATCH pve-docs 14/14] pvesdn: simple zones: document dedicated VRFs Stefan Hanreich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119194547.674512-7-s.hanreich@proxmox.com \
--to=s.hanreich@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox