From: Thomas Lamprecht <t.lamprecht@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH v7 storage 15/43] api: multipath: add the cluster-wide health status
Date: Wed, 18 Nov 2026 21:25:58 +0100 [thread overview]
Message-ID: <20261118202646.3017286-16-t.lamprecht@proxmox.com> (raw)
In-Reply-To: <20261118202646.3017286-1-t.lamprecht@proxmox.com>
Combine the reports of the nodes into one view: the state of each node,
and per LUN the state of its map on each node with the worst known one
as summary. A report older than three minutes, or of an offline node, is
ignored.
A node should have a LUN if an explicit entry, the iSCSI storage that
requests the map or a shared LVM storage on the LUN covers the node.
If such a node does not report the LUN, the LUN counts as missing
there. It counts as unknown if the node has no current report or no
usable multipath. The same holds if the node left maps out because it
does not know their volume groups, and knows the LUN only through the
volume group of a storage. Nodes also report the number of paths they
expect for each map, so that a map with fewer paths can show how many
are missing.
Each LUN also names the enabled iSCSI storage with multipath that
requests its map. This tells a map without an explicit entry apart
from one that nothing in Proxmox VE asked for. Storage admins can read
the status as well, as they need the initiator names for the access
rules on the array.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
src/PVE/API2/Multipath.pm | 104 +++++++++++++++-
src/PVE/Multipath/Status.pm | 116 +++++++++++++++++
src/test/run_multipath_api_tests.pl | 185 +++++++++++++++++++++++++++-
3 files changed, 403 insertions(+), 2 deletions(-)
diff --git a/src/PVE/API2/Multipath.pm b/src/PVE/API2/Multipath.pm
index efd56c75..8e60f70a 100644
--- a/src/PVE/API2/Multipath.pm
+++ b/src/PVE/API2/Multipath.pm
@@ -10,6 +10,7 @@ use PVE::RESTHandler;
use PVE::Tools qw(extract_param);
use PVE::Multipath::Config;
+use PVE::Multipath::Status;
use base qw(PVE::RESTHandler);
@@ -60,7 +61,108 @@ __PACKAGE__->register_method({
links => [{ rel => 'child', href => "{name}" }],
},
code => sub {
- return [map { +{ name => $_ } } qw(overrides wwid)];
+ return [map { +{ name => $_ } } qw(overrides status wwid)];
+ },
+});
+
+my $state_schema = {
+ type => 'string',
+ enum => ['optimal', 'degraded', 'failed', 'missing', 'unknown'],
+};
+my $lun_node_schema = {
+ type => 'object',
+ additionalProperties => 0,
+ properties => {
+ state => $state_schema,
+ name => { type => 'string', optional => 1 },
+ map { $_ => { type => 'integer', minimum => 0, optional => 1 } }
+ qw(size paths-active paths-total paths-expected),
+ },
+};
+my $node_schema = {
+ type => 'object',
+ additionalProperties => 0,
+ properties => {
+ state => { type => 'string', enum => ['ok', 'unavailable', 'no-report'] },
+ time => { type => 'integer', optional => 1 },
+ 'other-maps' => {
+ type => 'integer',
+ minimum => 1,
+ optional => 1,
+ description => 'The number of multipath maps that the node leaves out of its LUN'
+ . ' list. It lists the maps that Proxmox VE manages and the ones it knows to be the'
+ . ' base volume of a storage or to hold its volume group.',
+ },
+ map { $_ => { type => 'string', optional => 1 } }
+ qw(error apply-error iscsi-initiator-name),
+ },
+};
+
+__PACKAGE__->register_method({
+ name => 'status',
+ path => 'status',
+ method => 'GET',
+ description => "Report the multipath health of each LUN on each node, and as summary the"
+ . " worst known state among the nodes that should see or report the LUN. Nodes whose"
+ . " state is unknown are not counted.",
+ # Storage administrators need path health and initiator names to configure SAN target ACLs.
+ permissions => {
+ check => [
+ 'or', ['perm', '/', ['Sys.Audit']], ['perm', '/storage', ['Datastore.Allocate']],
+ ],
+ },
+ parameters => {
+ additionalProperties => 0,
+ properties => {},
+ },
+ returns => {
+ type => 'object',
+ properties => {
+ luns => {
+ type => 'array',
+ description =>
+ "One entry per LUN, identified by its WWID, with the state of its"
+ . " map on each node and the overall cluster state.",
+ items => {
+ type => 'object',
+ additionalProperties => 0,
+ properties => {
+ wwid => { type => 'string', description => 'The LUN WWID.' },
+ explicit =>
+ { type => 'boolean', description => 'An explicit entry exists.' },
+ name => { type => 'string', optional => 1 },
+ 'used-by-storage' => {
+ type => 'string',
+ optional => 1,
+ description =>
+ 'The storage that uses the LUN: as its base volume or through'
+ . ' the volume group on it, or as an iSCSI storage that serves'
+ . ' the LUNs of its target as images.',
+ },
+ 'multipath-storage' => {
+ type => 'string',
+ optional => 1,
+ description => 'The storage that requests the map of the LUN.',
+ },
+ size => { type => 'integer', minimum => 0, optional => 1 },
+ state => $state_schema,
+ nodes => {
+ type => 'object',
+ description => "Map health keyed by node name.",
+ additionalProperties => $lun_node_schema,
+ },
+ },
+ },
+ },
+ nodes => {
+ type => 'object',
+ description => "Available node reports, keyed by node name.",
+ additionalProperties => $node_schema,
+ },
+ },
+ },
+ code => sub {
+ return PVE::Multipath::Status::cluster_status();
},
});
diff --git a/src/PVE/Multipath/Status.pm b/src/PVE/Multipath/Status.pm
index 2dcd430b..8e4b4eb7 100644
--- a/src/PVE/Multipath/Status.pm
+++ b/src/PVE/Multipath/Status.pm
@@ -8,11 +8,22 @@ use PVE::Cluster;
use PVE::INotify;
use PVE::Multipath;
+use PVE::Multipath::Config;
use PVE::Multipath::Generator;
my $json = JSON->new->utf8->canonical;
my $KEY = 'multipath';
+sub worst_state(@states) {
+ my %rank = (unknown => -1, optimal => 0, degraded => 1, missing => 2, failed => 3);
+ my $worst = 'unknown';
+ for my $state (@states) {
+ $worst = $state
+ if defined($state) && exists($rank{$state}) && $rank{$state} > $rank{$worst};
+ }
+ return $worst;
+}
+
sub publish($report) {
my $node = PVE::INotify::nodename();
my $now = time();
@@ -83,6 +94,8 @@ sub update_node_status() {
$lun->{size} = $map->{size} if defined($map->{size});
$lun->{name} = $map->{name} if defined($map->{name}) && $map->{name} ne $wwid;
$lun->{storages} = $info->{storages} if $info->{storages};
+ $lun->{'paths-expected'} = $info->{'paths-expected'}
+ if defined($info->{'paths-expected'});
$lun->{vgname} = $vg if defined($vg);
push $report->{luns}->@*, $lun;
}
@@ -109,4 +122,107 @@ sub update_node_status() {
warn "multipath: cannot publish node status - $@" if $@;
}
+sub cluster_status() {
+ require PVE::Storage;
+
+ my $cfg = PVE::Multipath::Config::read_config();
+ my $storage = PVE::Storage::config();
+ my $all_nodes = PVE::Cluster::get_nodelist();
+ my $members = PVE::Cluster::get_members();
+ my $raw = PVE::Cluster::get_node_kv($KEY);
+ my (%nodes, %luns, %expected, %observed, %vg_owner);
+ # the nodes that list a map because the configuration names it for them
+ my (%managed, %unhinted);
+ my $storage_nodes = sub($scfg) {
+ return $scfg->{nodes} && $scfg->{nodes}->%* ? [keys $scfg->{nodes}->%*] : $all_nodes;
+ };
+ # only an enabled iSCSI storage with the option requests the maps of its LUNs, on its nodes
+ my %current = map { $_ => 1 } @$all_nodes;
+ my $requests_maps = sub($sid, $node = undef) {
+ my $scfg = defined($sid) ? $storage->{ids}->{$sid} : undef;
+ my $requests = $scfg && $scfg->{type} eq 'iscsi' && $scfg->{'managed-multipath'};
+ return 0 if !$requests || $scfg->{disable};
+ my @nodes = grep { $current{$_} } $storage_nodes->($scfg)->@*;
+ return defined($node) ? !!grep({ $_ eq $node } @nodes) : !!@nodes;
+ };
+ for my $wwid (PVE::Multipath::Config::wwid_list($cfg)->@*) {
+ my $entry = $cfg->{ids}->{$wwid};
+ $luns{$wwid} = { wwid => $wwid, explicit => 1 };
+ $luns{$wwid}->{name} = $entry->{alias} if defined($entry->{alias});
+ $expected{$wwid}->{$_} = $managed{$wwid}->{$_} = 1 for $storage_nodes->($entry)->@*;
+ }
+ for my $sid (sort keys $storage->{ids}->%*) {
+ my $scfg = $storage->{ids}->{$sid};
+ $vg_owner{ $scfg->{vgname} } //= $sid if defined($scfg->{vgname});
+ next if $scfg->{type} ne 'lvm';
+ my ($wwid) = ($scfg->{base} // '') =~ /(?:^|\.)dm-uuid-(?:part\d+-)?mpath-(\S+)$/;
+ next if !defined($wwid);
+ $luns{$wwid} //= { wwid => $wwid, explicit => 0 };
+ $luns{$wwid}->{'used-by-storage'} //= $sid;
+ $managed{$wwid}->{$_} = 1 for @$all_nodes;
+ my ($base) = $scfg->{base} =~ /^([^:]+):/;
+ $luns{$wwid}->{'multipath-storage'} //= $base if $requests_maps->($base);
+ $expected{$wwid}->{$_} = 1 for $storage_nodes->($scfg)->@*;
+ }
+ for my $node (sort @$all_nodes) {
+ my $report = eval { decode_json($raw->{$node} // '') };
+ $report = {} if ref($report) ne 'HASH';
+ my $entry = $nodes{$node} = { state => 'no-report' };
+ $entry->{time} = $report->{time} if defined($report->{time});
+ my $offline = exists($members->{$node}) && !$members->{$node}->{online};
+ next if $offline || !defined($report->{time}) || time() - $report->{time} > 180;
+ my @keys = qw(error apply-error iscsi-initiator-name other-maps);
+ $entry->{$_} = $report->{$_} for grep { defined($report->{$_}) } @keys;
+ $entry->{state} = defined($report->{error}) ? 'unavailable' : 'ok';
+ $unhinted{$node} = 1 if $report->{'vgs-unknown'};
+ next if $entry->{state} ne 'ok';
+
+ for my $lun (($report->{luns} // [])->@*) {
+ my $wwid = $lun->{wwid} // next;
+ my $row = $luns{$wwid} //= { wwid => $wwid, explicit => 0 };
+ $row->{$_} //= $lun->{$_} for grep { defined($lun->{$_}) } qw(name size);
+ my $owner = defined($lun->{vgname}) ? $vg_owner{ $lun->{vgname} } : undef;
+ $row->{'used-by-storage'} //= $owner if defined($owner);
+ # a shared LVM storage on the map needs it on its nodes, also without a base volume
+ my $lvm = defined($owner) ? $storage->{ids}->{$owner} : undef;
+ if ($lvm && $lvm->{type} eq 'lvm' && $lvm->{shared} && !$lvm->{disable}) {
+ $expected{$wwid}->{$_} = 1 for $storage_nodes->($lvm)->@*;
+ }
+ for my $sid (($lun->{storages} // [])->@*) {
+ my $scfg = $storage->{ids}->{$sid} // next;
+ $row->{'multipath-storage'} //= $sid if $requests_maps->($sid, $node);
+ $row->{'used-by-storage'} //= $sid
+ if PVE::Storage::san_storage_serves_images($scfg);
+ $expected{$wwid}->{$_} = 1
+ for !$scfg->{disable} ? $storage_nodes->($scfg)->@* : ();
+ $managed{$wwid}->{$_} = 1
+ for $requests_maps->($sid) ? $storage_nodes->($scfg)->@* : ();
+ }
+ $observed{$wwid}->{$node} = {
+ state => worst_state($lun->{state}),
+ map { $_ => $lun->{$_} }
+ grep { defined($lun->{$_}) }
+ qw(name size paths-active paths-total paths-expected),
+ };
+ }
+ }
+ for my $wwid (sort keys %luns) {
+ my $row = $luns{$wwid};
+ $row->{nodes} = {};
+ for my $node (sort @$all_nodes) {
+ if ($observed{$wwid}->{$node}) {
+ $row->{nodes}->{$node} = $observed{$wwid}->{$node};
+ } elsif ($expected{$wwid}->{$node}) {
+ my $listed = $nodes{$node}->{state} eq 'ok';
+ # without the hint file of LVM a node leaves a map out that it only knows through
+ # the volume group of a storage
+ $listed = 0 if $unhinted{$node} && !$managed{$wwid}->{$node};
+ $row->{nodes}->{$node} = { state => $listed ? 'missing' : 'unknown' };
+ }
+ }
+ $row->{state} = worst_state(map { $_->{state} } values $row->{nodes}->%*);
+ }
+ return { nodes => \%nodes, luns => [map { $luns{$_} } sort keys %luns] };
+}
+
1;
diff --git a/src/test/run_multipath_api_tests.pl b/src/test/run_multipath_api_tests.pl
index 36b85761..6955076b 100755
--- a/src/test/run_multipath_api_tests.pl
+++ b/src/test/run_multipath_api_tests.pl
@@ -46,7 +46,7 @@ subtest 'explicit entries are ordinary configuration writes' => sub {
}
is_deeply(
PVE::API2::Multipath->index({}),
- [map { { name => $_ } } qw(overrides wwid)],
+ [map { { name => $_ } } qw(overrides status wwid)],
'index',
);
};
@@ -338,6 +338,8 @@ subtest 'a LUN of a storage without a map is missing' => sub {
my $iscsi = Test::MockModule->new('PVE::Storage::ISCSIPlugin');
my $storage = Test::MockModule->new('PVE::Storage');
my $lvm = Test::MockModule->new('PVE::Storage::LVMPlugin');
+ my $cluster = Test::MockModule->new('PVE::Cluster');
+ my $config = Test::MockModule->new('PVE::Multipath::Config');
my %raw;
$status->mock(publish => sub { $raw{n1} = encode_json({ $_[0]->%*, time => $NOW }) });
$iscsi->mock(read_initiator_info => sub { undef });
@@ -363,6 +365,13 @@ subtest 'a LUN of a storage without a map is missing' => sub {
[{ wwid => '3600a', state => 'missing', storages => ['san'], 'paths-expected' => 2 }],
'the LUN of the storage, not one of an entry, nor one added in this pass',
);
+ $cluster->mock(get_nodelist => sub { ['n1'] }, get_members => sub { {} });
+ $cluster->mock(get_node_kv => sub { \%raw });
+ $config->mock(read_config => sub { { ids => {} } });
+ my ($row) = PVE::Multipath::Status::cluster_status()->{luns}->@*;
+ is($row->{wwid}, '3600a', 'the cluster status lists it');
+ is($row->{state}, 'missing', 'as missing');
+ is($row->{'multipath-storage'}, 'san', 'with the storage that requests it');
};
subtest 'one entry point applies configuration and reports unavailable reasons' => sub {
@@ -395,7 +404,181 @@ subtest 'one entry point applies configuration and reports unavailable reasons'
sub { [{ wwid => '3600a', name => 'data', 'paths-active' => 1, 'paths-total' => 2 }] });
PVE::Multipath::Status::update_node_status();
is($report->{luns}->[0]->{state}, 'degraded', 'all maps while the wanted ones are unknown');
+ ok(!exists($report->{luns}->[0]->{'paths-expected'}), 'no expected count without a source');
+ $gen->mock(sync => sub { { wwids => { '3600a' => { 'paths-expected' => 3 } } } });
+ $mp->mock(get_maps =>
+ sub { [{ wwid => '3600a', name => 'data', 'paths-active' => 2, 'paths-total' => 2 }] });
+ PVE::Multipath::Status::update_node_status();
+ is($report->{luns}->[0]->{'paths-expected'}, 3, 'expected count reported');
+ is($report->{luns}->[0]->{state}, 'degraded', 'fewer paths than expected');
ok(!exists($report->{supported}), 'no separate capability state');
};
+subtest 'API returns final node and LUN states' => sub {
+ my $cluster = Test::MockModule->new('PVE::Cluster');
+ my $config = Test::MockModule->new('PVE::Multipath::Config');
+ my $storage = Test::MockModule->new('PVE::Storage');
+ $cluster->mock(get_nodelist => sub { [qw(n1 n2 n3 n4 n5)] });
+ $cluster->mock(get_members => sub { { n4 => { online => 0 } } });
+ my %raw = (
+ n1 => encode_json({
+ time => $NOW,
+ luns => [
+ {
+ wwid => '3600a',
+ state => 'optimal',
+ 'paths-total' => 2,
+ 'paths-active' => 2,
+ 'paths-expected' => 2,
+ storages => ['iscsi'],
+ vgname => 'vgfc',
+ },
+ {
+ wwid => '3600d',
+ state => 'optimal',
+ 'paths-total' => 2,
+ 'paths-active' => 2,
+ storages => ['off'],
+ vgname => 'vgshared',
+ },
+ {
+ wwid => '3600f',
+ state => 'optimal',
+ 'paths-total' => 2,
+ 'paths-active' => 2,
+ storages => ['scoped'],
+ },
+ ],
+ }),
+ n2 => encode_json({ time => $NOW, luns => [] }),
+ n3 => encode_json({ time => $NOW - 181, luns => [] }),
+ n4 => encode_json({ time => $NOW, luns => [] }),
+ n5 => encode_json({ time => $NOW, error => 'multipath-tools is not installed' }),
+ );
+ $cluster->mock(get_node_kv => sub { \%raw });
+ my $entries = { '3600a' => { type => 'wwid' } };
+ $config->mock(read_config => sub { { ids => $entries } });
+ $storage->mock(
+ config => sub { {
+ ids => {
+ iscsi => { type => 'iscsi', 'managed-multipath' => 1 },
+ lvm => { type => 'lvm', base => 'iscsi:0.0.0.dm-uuid-mpath-3600b' },
+ fc => { type => 'lvm', vgname => 'vgfc' },
+ off => { type => 'iscsi' },
+ lvmoff => { type => 'lvm', base => 'off:0.0.0.dm-uuid-mpath-3600c' },
+ shared => { type => 'lvm', vgname => 'vgshared', shared => 1 },
+ gone =>
+ { type => 'iscsi', 'managed-multipath' => 1, nodes => { departed => 1 } },
+ lvmgone => { type => 'lvm', base => 'gone:0.0.0.dm-uuid-mpath-3600e' },
+ scoped => { type => 'iscsi', 'managed-multipath' => 1, nodes => { n2 => 1 } },
+ },
+ } },
+ );
+ my $res = PVE::API2::Multipath->status({});
+ is_deeply(
+ [map { $res->{nodes}->{$_}->{state} } qw(n1 n2 n3 n4 n5)],
+ [qw(ok ok no-report no-report unavailable)],
+ 'final node states',
+ );
+ is($res->{nodes}->{n3}->{time}, $NOW - 181, 'old report time retained');
+ my $lun = $res->{luns}->[0];
+ is($lun->{state}, 'missing', 'worst known state');
+ is($lun->{nodes}->{n1}->{state}, 'optimal', 'observed healthy map');
+ is($lun->{nodes}->{n2}->{state}, 'missing', 'expected map absent from current report');
+ is($lun->{nodes}->{n3}->{state}, 'unknown', 'stale observation');
+ is($lun->{'used-by-storage'}, 'fc', 'storage attributed through the reported volume group');
+ is($res->{luns}->[1]->{wwid}, '3600b', 'LVM base included without observation');
+ is($res->{luns}->[1]->{'used-by-storage'}, 'lvm', 'LVM consumer attributed');
+ is($lun->{'multipath-storage'}, 'iscsi', 'reported storage requests the map');
+ is($res->{luns}->[1]->{'multipath-storage'}, 'iscsi', 'base storage requests the map');
+ is($lun->{nodes}->{n1}->{'paths-expected'}, 2, 'expected path count of the node');
+ my %lun = map { $_->{wwid} => $_ } $res->{luns}->@*;
+ ok(
+ !exists($lun{'3600c'}->{'multipath-storage'}),
+ 'a base without multipath requests nothing',
+ );
+ ok(!exists($lun{'3600d'}->{'multipath-storage'}), 'neither does a reported one');
+ ok(
+ !exists($lun{'3600e'}->{'multipath-storage'}),
+ 'a base for no current node requests nothing',
+ );
+ ok(!exists($lun{'3600f'}->{'multipath-storage'}), 'a storage requests on its nodes only');
+ is(
+ $lun{'3600d'}->{nodes}->{n2}->{state},
+ 'missing',
+ 'the nodes of a shared LVM expect the map',
+ );
+ is($lun{'3600d'}->{'used-by-storage'}, 'shared', 'shared LVM attributed by volume group');
+ {
+ local $raw{n2} = encode_json({ time => $NOW, luns => [], 'vgs-unknown' => 1 });
+ my %unhinted = map { $_->{wwid} => $_ } PVE::API2::Multipath->status({})->{luns}->@*;
+ is(
+ $unhinted{'3600d'}->{nodes}->{n2}->{state},
+ 'unknown',
+ 'a node without LVM hints may have left out the map of a volume group',
+ );
+ is($unhinted{'3600a'}->{nodes}->{n2}->{state}, 'missing', 'but for one with an entry');
+ is(
+ $unhinted{'3600f'}->{nodes}->{n2}->{state},
+ 'missing',
+ 'and for one that an iSCSI storage requests there',
+ );
+ local $entries->{'3600d'} = { type => 'wwid', nodes => { n1 => 1 } };
+ %unhinted = map { $_->{wwid} => $_ } PVE::API2::Multipath->status({})->{luns}->@*;
+ is(
+ $unhinted{'3600d'}->{nodes}->{n2}->{state},
+ 'unknown',
+ 'an entry for other nodes does not change that',
+ );
+ }
+ eval {
+ PVE::JSONSchema::validate(
+ $res,
+ PVE::API2::Multipath->map_method_by_name('status')->{returns},
+ );
+ };
+ is($@, '', 'result satisfies the API schema');
+ is(
+ PVE::Multipath::Status::worst_state(qw(unknown optimal failed degraded missing)),
+ 'failed',
+ 'one ranking',
+ );
+};
+
+subtest 'every storage that requests a map counts' => sub {
+ my $cluster = Test::MockModule->new('PVE::Cluster');
+ my $config = Test::MockModule->new('PVE::Multipath::Config');
+ my $storage = Test::MockModule->new('PVE::Storage');
+ $cluster->mock(get_nodelist => sub { [qw(n1 n2 n3)] });
+ $cluster->mock(get_members => sub { {} });
+ my $lun = {
+ wwid => '3600x',
+ state => 'optimal',
+ 'paths-total' => 2,
+ 'paths-active' => 2,
+ storages => [qw(s1 s2)],
+ };
+ my %raw = map { $_ => encode_json({ time => $NOW, luns => [$lun] }) } qw(n1 n2);
+ $raw{n3} = encode_json({ time => $NOW, luns => [] });
+ $cluster->mock(get_node_kv => sub { \%raw });
+ $config->mock(read_config => sub { { ids => {} } });
+ $storage->mock(
+ config => sub { {
+ ids => {
+ s1 =>
+ { type => 'iscsi', 'managed-multipath' => 1, nodes => { n1 => 1, n2 => 1 } },
+ s2 => {
+ type => 'iscsi',
+ 'managed-multipath' => 1,
+ nodes => { n3 => 1 },
+ content => { images => 1 },
+ },
+ },
+ } },
+ );
+ my ($row) = PVE::Multipath::Status::cluster_status()->{luns}->@*;
+ is($row->{nodes}->{n3}->{state}, 'missing', 'a node of the second storage expects the map');
+ is($row->{'used-by-storage'}, 's2', 'which serves its LUNs');
+};
+
done_testing();
next prev parent reply other threads:[~2026-11-18 20:31 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 20:25 [PATCH v7 cluster,storage,docs,manager 00/43] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 cluster 01/43] cfs: observe the multipath configuration files Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 02/43] diskmanage: collect disk transport type from lsblk Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 03/43] diskmanage: qualify NVMe over Fabrics transport Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 04/43] diskmanage: optionally include iSCSI session devices in disk enumeration Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 05/43] diskmanage: collect native NVMe multipath path state Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 06/43] iscsi: factor out session device map from device list Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 07/43] multipath: add a library around multipathd Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 08/43] diskmanage: add helper to list multipath devices Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 09/43] multipath: add a cluster-wide configuration Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 10/43] iscsi: add an option to manage storage LUNs with multipath Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 11/43] lvm: activate a missing base volume before using the volume group Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 12/43] multipath: apply the configuration on every node Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 13/43] multipath: publish per-node status Thomas Lamprecht
2026-11-18 20:25 ` [PATCH v7 storage 14/43] api: add endpoints for the cluster-wide multipath configuration Thomas Lamprecht
2026-11-18 20:25 ` Thomas Lamprecht [this message]
2026-11-18 20:25 ` [PATCH v7 storage 16/43] diskmanage: look up the requested disks by name Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 17/43] diskmanage: read the udev data of all disks with one call Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 18/43] api: scan: add a SAN LUN inventory Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 19/43] pvesm: expose the " Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 20/43] api: add node-level iSCSI status Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 21/43] api: scan: name the portal of an iSCSI path Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 22/43] disks: lvm: drop unused imports Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 23/43] disks: lvm: allow volume groups on SAN LUNs and multipath maps Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 24/43] disks: lvm: refuse to destroy the volume group of a shared storage Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 25/43] disks: allow wiping a SAN LUN that no storage uses Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 storage 26/43] api: scan: report the process that has a SAN LUN open Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 docs 27/43] storage: document the cluster-wide multipath management Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 docs 28/43] storage: multipath: describe the use shown for an open LUN Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 29/43] pvestatd: apply the multipath configuration and report the node status Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 30/43] report: add the managed multipath configuration Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 31/43] api: cluster: add the multipath endpoints Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 32/43] api: nodes: expose the iSCSI status Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 33/43] ui: dc: add a SAN view Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 34/43] ui: storage: iscsi: add the multipath option Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 35/43] ui: lvm: enable shared when a base storage is selected Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 36/43] ui: node: add SAN LUNs panel Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 37/43] ui: node: san: wipe a LUN that no storage uses Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 38/43] ui: node: san: show iSCSI targets and sessions Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 39/43] ui: dc: san: add a guided setup for shared LVM on iSCSI Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 40/43] ui: dc: san: add a guided setup for shared LVM on Fibre Channel Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 41/43] ui: storage: point the iSCSI and LVM add dialogs to the SAN view Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 42/43] ui: san: show the guest or process that has a LUN open Thomas Lamprecht
2026-11-18 20:26 ` [PATCH v7 manager 43/43] ui: node: san: add a column for the target or subsystem of a LUN Thomas Lamprecht
2026-11-19 19:49 ` superseded: [PATCH v7 cluster,storage,docs,manager 00/43] SAN: cluster-wide multipath, SAN views and a guided setup for shared LVM Thomas Lamprecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118202646.3017286-16-t.lamprecht@proxmox.com \
--to=t.lamprecht@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox