public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
From: copystring <copystring@gmail.com>
To: pve-devel@lists.proxmox.com
Cc: copystring <copystring@gmail.com>
Subject: SPAM: [RFC PATCH 1/4] lxc: create: add isolated OCI rootfs preparation
Date: Mon,  6 Jul 2026 21:39:29 +0200	[thread overview]
Message-ID: <20260706193934.279992-2-copystring@gmail.com> (raw)
In-Reply-To: <20260706193934.279992-1-copystring@gmail.com>

Prepare a new rootfs volume from an OCI archive without mounting any existing mpX mount points. This keeps the active container config untouched until a later API layer can switch rootfs atomically.

The helper preserves rootfs options, carries over only idmap-related LXC entries into the temporary extraction config, returns OCI-derived runtime metadata from the unshared worker, and tears down the new volume on prepare or cleanup failure.

Signed-off-by: copystring <copystring@gmail.com>
---
 src/PVE/LXC/Create.pm                    |  95 +++++++++
 src/test/Makefile                        |   4 +-
 src/test/oci-rootfs-replace-test.pm      | 250 +++++++++++++++++++++++
 src/test/run_oci_rootfs_replace_tests.pl |  10 +
 4 files changed, 358 insertions(+), 1 deletion(-)
 create mode 100644 src/test/oci-rootfs-replace-test.pm
 create mode 100644 src/test/run_oci_rootfs_replace_tests.pl

diff --git a/src/PVE/LXC/Create.pm b/src/PVE/LXC/Create.pm
index 69065b9..f809afb 100644
--- a/src/PVE/LXC/Create.pm
+++ b/src/PVE/LXC/Create.pm
@@ -783,6 +783,101 @@ sub restore_oci_archive {
     return $conf; # it's a reference anyway, so return mostly for convenience.
 }
 
+my sub oci_rootfs_size_to_gb {
+    my ($size) = @_;
+
+    my $size_mib = int(($size + 1024 * 1024 - 1) / (1024 * 1024));
+    my $size_gb = sprintf('%.6f', $size_mib / 1024);
+    $size_gb =~ s/0+$//;
+    $size_gb =~ s/\.$//;
+
+    return $size_gb;
+}
+
+my sub oci_config_lxc_copy {
+    my ($conf) = @_;
+
+    return [map { [@$_] } grep { $_->[0] eq 'lxc.idmap' } @{ $conf->{lxc} // [] }];
+}
+
+sub create_oci_rootfs {
+    my ($storage_cfg, $vmid, $archive, $storage, $size, $conf, $rootdir_base) = @_;
+
+    die "archive '$archive' is not an OCI image archive\n"
+        if !archive_is_oci_format($storage_cfg, $archive);
+
+    my $size_gb = oci_rootfs_size_to_gb($size);
+    my $rootfs = PVE::LXC::Config->parse_volume('rootfs', $conf->{rootfs});
+    my $new_rootfs_config = {
+        %$rootfs,
+        volume => "$storage:$size_gb",
+    };
+    delete $new_rootfs_config->{type};
+    delete $new_rootfs_config->{size};
+
+    my $settings = {
+        rootfs => PVE::LXC::Config->print_ct_mountpoint($new_rootfs_config, 1),
+    };
+    my $new_conf = {
+        lxc => oci_config_lxc_copy($conf),
+    };
+    $new_conf->{unprivileged} = $conf->{unprivileged} if exists($conf->{unprivileged});
+
+    $rootdir_base //= "/var/lib/lxc/$vmid";
+    File::Path::make_path($rootdir_base);
+    my $rootdir = "$rootdir_base/.oci-replace-rootfs";
+
+    my $vollist = PVE::LXC::create_disks($storage_cfg, $vmid, $settings, $new_conf);
+    my $new_rootfs = PVE::LXC::Config->parse_volume('rootfs', $new_conf->{rootfs});
+    my $new_volid = $new_rootfs->{volume};
+
+    eval {
+        my (undef, $root_uid, $root_gid) = PVE::LXC::parse_id_maps($conf);
+
+        $new_conf = PVE::LXC::run_unshared(sub {
+            die "temporary OCI rootfs path '$rootdir' already exists\n" if -e $rootdir;
+
+            my @mounted;
+            eval {
+                mkdir $rootdir
+                    or die "failed to create temporary OCI rootfs path '$rootdir': $!\n";
+
+                my $mountpoint = { %$new_rootfs, mp => '/', ro => 0 };
+                PVE::LXC::mountpoint_mount(
+                    $mountpoint, $rootdir, $storage_cfg, undef, $root_uid, $root_gid,
+                );
+                push @mounted, $rootdir;
+
+                restore_oci_archive($storage_cfg, $archive, $rootdir, $new_conf);
+                PVE::LXC::Setup->new($new_conf, $rootdir); # detect OS and architecture
+            };
+            my $err = $@;
+            my $cleanup_err = '';
+
+            foreach my $mount (reverse @mounted) {
+                eval {
+                    PVE::Tools::run_command(['/bin/umount', $mount], errfunc => sub { });
+                };
+                $cleanup_err .= "can't unmount temporary OCI rootfs path '$mount': $@\n" if $@;
+            }
+
+            $cleanup_err .= "failed to remove temporary OCI rootfs path '$rootdir': $!\n"
+                if -d $rootdir && !rmdir $rootdir;
+
+            die $err if $err;
+            die $cleanup_err if $cleanup_err;
+
+            return $new_conf;
+        });
+    };
+    if (my $err = $@) {
+        PVE::LXC::destroy_disks($storage_cfg, $vollist);
+        die $err;
+    }
+
+    return ($new_conf->{rootfs}, $new_volid, $new_conf);
+}
+
 sub resolve_oci_user {
     my ($userstr, $rootdir) = @_;
 
diff --git a/src/test/Makefile b/src/test/Makefile
index 91ae6ff..8da35ee 100644
--- a/src/test/Makefile
+++ b/src/test/Makefile
@@ -2,7 +2,7 @@ RUN_USERNS := lxc-usernsexec -m "u:0:`id -u`:1" -m "g:0:`id -g`:1" --
 
 all: test
 
-test: test_setup test_snapshot test_bindmount test_idmap
+test: test_setup test_snapshot test_bindmount test_idmap test_oci_rootfs_replace
 
 test_setup: run_setup_tests.pl
 	if test -e /run/lock/sbuild; then \
@@ -24,5 +24,7 @@ test_bindmount: bindmount_test.pl
 test_idmap: run_idmap_tests.pl
 	./run_idmap_tests.pl
 
+test_oci_rootfs_replace: run_oci_rootfs_replace_tests.pl
+	./run_oci_rootfs_replace_tests.pl
 clean:
 	rm -rf tmprootfs
diff --git a/src/test/oci-rootfs-replace-test.pm b/src/test/oci-rootfs-replace-test.pm
new file mode 100644
index 0000000..88f8485
--- /dev/null
+++ b/src/test/oci-rootfs-replace-test.pm
@@ -0,0 +1,250 @@
+package PVE::LXC::Test;
+
+use strict;
+use warnings;
+
+use lib qw(..);
+
+use File::Temp qw(tempdir);
+use Storable qw(dclone);
+use Test::MockModule;
+use Test::More;
+
+use PVE::LXC;
+use PVE::LXC::Config;
+use PVE::LXC::Create;
+use PVE::LXC::Setup;
+use PVE::Tools;
+
+my $storage_cfg = {};
+my $vmid = 900;
+my $archive = 'local:vztmpl/test-oci.tar';
+my $storage = 'local-lvm';
+my $size = 2 * 1024 * 1024 * 1024;
+my $new_volid = 'local-lvm:vm-900-disk-9';
+
+my $base_conf = {
+    rootfs => 'local-lvm:vm-900-disk-0,size=2G,acl=1,mountoptions=noatime,quota=1',
+    mp0 => 'local-lvm:vm-900-disk-1,mp=/data,size=1G',
+    mp1 => '/host/path,mp=/bind',
+    unprivileged => 1,
+    lxc => [
+        ['lxc.idmap', 'u 0 100000 65536'],
+        ['lxc.idmap', 'g 0 100000 65536'],
+        ['lxc.init.cwd', '/old-cwd'],
+    ],
+};
+
+my (
+    $fail_restore,
+    $fail_umount,
+    $create_disks_settings,
+    $create_disks_conf,
+    @destroy_disks_calls,
+    @mountpoint_mount_calls,
+    @restore_oci_calls,
+    @setup_calls,
+    @run_command_calls,
+);
+
+my $create_module = Test::MockModule->new('PVE::LXC::Create');
+$create_module->mock(
+    archive_is_oci_format => sub {
+        my ($cfg, $volid) = @_;
+        is($cfg, $storage_cfg, 'archive check uses storage config');
+        is($volid, $archive, 'archive check uses requested OCI archive');
+        return 1;
+    },
+    restore_oci_archive => sub {
+        my ($cfg, $volid, $rootdir, $conf) = @_;
+        push @restore_oci_calls, [$cfg, $volid, $rootdir, dclone($conf)];
+        die "mocked OCI extraction failure\n" if $fail_restore;
+
+        $conf->{entrypoint} = '/usr/bin/new-entrypoint';
+        $conf->{env} = "FOO=bar\0PATH=/usr/bin";
+        push $conf->{lxc}->@*, ['lxc.signal.halt', 'SIGUSR1'];
+    },
+);
+
+my $lxc_module = Test::MockModule->new('PVE::LXC');
+$lxc_module->mock(
+    create_disks => sub {
+        my ($cfg, $got_vmid, $settings, $conf) = @_;
+        is($cfg, $storage_cfg, 'create_disks uses storage config');
+        is($got_vmid, $vmid, 'create_disks uses vmid');
+        $create_disks_settings = dclone($settings);
+        $create_disks_conf = dclone($conf);
+        $conf->{rootfs} = 'local-lvm:vm-900-disk-9,size=2G,acl=1,mountoptions=noatime,quota=1';
+        return [$new_volid];
+    },
+    destroy_disks => sub {
+        push @destroy_disks_calls, dclone(\@_);
+    },
+    mount_all => sub {
+        die "mount_all must not be used for OCI rootfs replacement\n";
+    },
+    mountpoint_mount => sub {
+        my ($mountpoint, $rootdir, $cfg, $snapname, $root_uid, $root_gid) = @_;
+        push @mountpoint_mount_calls,
+            [dclone($mountpoint), $rootdir, $cfg, $snapname, $root_uid, $root_gid];
+    },
+    parse_id_maps => sub {
+        return ([], 100000, 100000);
+    },
+    run_unshared => sub {
+        my ($code) = @_;
+        return $code->();
+    },
+);
+
+my $setup_module = Test::MockModule->new('PVE::LXC::Setup');
+$setup_module->mock(
+    new => sub {
+        my ($class, $conf, $rootdir) = @_;
+        push @setup_calls, [$class, dclone($conf), $rootdir];
+        $conf->{ostype} = 'debian';
+        $conf->{arch} = 'amd64';
+        return bless {}, $class;
+    },
+);
+
+my $tools_module = Test::MockModule->new('PVE::Tools');
+$tools_module->mock(
+    run_command => sub {
+        my ($cmd, %param) = @_;
+        push @run_command_calls, dclone($cmd);
+        die "mocked umount failure\n" if $fail_umount;
+    },
+);
+
+sub reset_state {
+    $fail_restore = 0;
+    $fail_umount = 0;
+    $create_disks_settings = undef;
+    $create_disks_conf = undef;
+    @destroy_disks_calls = ();
+    @mountpoint_mount_calls = ();
+    @restore_oci_calls = ();
+    @setup_calls = ();
+    @run_command_calls = ();
+}
+
+sub run_create_oci_rootfs {
+    my ($conf, $rootdir_base) = @_;
+
+    return PVE::LXC::Create::create_oci_rootfs(
+        $storage_cfg,
+        $vmid,
+        $archive,
+        $storage,
+        $size,
+        $conf,
+        $rootdir_base,
+    );
+}
+
+subtest 'prepares only a new rootfs and preserves OCI-derived config' => sub {
+    reset_state();
+    my $tmpdir = tempdir(CLEANUP => 1);
+    my $conf = dclone($base_conf);
+    my $orig_conf = dclone($conf);
+
+    my ($new_rootfs_conf, $got_new_volid, $oci_conf) = run_create_oci_rootfs($conf, $tmpdir);
+
+    is($got_new_volid, $new_volid, 'returns new rootfs volid');
+    is($new_rootfs_conf, 'local-lvm:vm-900-disk-9,size=2G,acl=1,mountoptions=noatime,quota=1',
+        'returns new rootfs config');
+    is_deeply($conf, $orig_conf, 'source CT config is not mutated while preparing rootfs');
+
+    my $requested_rootfs = PVE::LXC::Config->parse_volume('rootfs', $create_disks_settings->{rootfs});
+    is($requested_rootfs->{volume}, 'local-lvm:2', 'allocates new rootfs on target storage');
+    is($requested_rootfs->{acl}, 1, 'preserves rootfs acl option');
+    is($requested_rootfs->{quota}, 1, 'preserves rootfs quota option');
+    is($requested_rootfs->{mountoptions}, 'noatime', 'preserves rootfs mount options');
+
+    is_deeply(
+        $create_disks_conf->{lxc},
+        [
+            ['lxc.idmap', 'u 0 100000 65536'],
+            ['lxc.idmap', 'g 0 100000 65536'],
+        ],
+        'copies only idmap lxc entries into the temporary OCI config',
+    );
+    ok(!exists($create_disks_conf->{mp0}), 'does not copy mp0 into temporary OCI config');
+    ok(!exists($create_disks_conf->{mp1}), 'does not copy mp1 into temporary OCI config');
+
+    is(scalar(@mountpoint_mount_calls), 1, 'mounts exactly one filesystem');
+    my ($mountpoint, $rootdir, $got_storage_cfg, $snapname, $root_uid, $root_gid) =
+        $mountpoint_mount_calls[0]->@*;
+    is($mountpoint->{volume}, $new_volid, 'mounts the newly allocated rootfs');
+    is($mountpoint->{mp}, '/', 'mounts it as root only');
+    is($rootdir, "$tmpdir/.oci-replace-rootfs", 'uses isolated temporary rootfs path');
+    is($got_storage_cfg, $storage_cfg, 'mount uses storage config');
+    is($snapname, undef, 'mount does not use snapshot');
+    is($root_uid, 100000, 'mount uses mapped root uid');
+    is($root_gid, 100000, 'mount uses mapped root gid');
+
+    is(scalar(@restore_oci_calls), 1, 'extracts OCI image once');
+    is($restore_oci_calls[0]->[2], "$tmpdir/.oci-replace-rootfs", 'extracts into new rootfs');
+    is(scalar(@setup_calls), 1, 'detects OS and architecture on the new rootfs');
+    is($setup_calls[0]->[2], "$tmpdir/.oci-replace-rootfs", 'runs setup detection on new rootfs');
+
+    is($oci_conf->{entrypoint}, '/usr/bin/new-entrypoint', 'returns OCI entrypoint');
+    is($oci_conf->{env}, "FOO=bar\0PATH=/usr/bin", 'returns OCI environment');
+    is($oci_conf->{ostype}, 'debian', 'returns detected ostype');
+    is($oci_conf->{arch}, 'amd64', 'returns detected architecture');
+    is_deeply(
+        $oci_conf->{lxc},
+        [
+            ['lxc.idmap', 'u 0 100000 65536'],
+            ['lxc.idmap', 'g 0 100000 65536'],
+            ['lxc.signal.halt', 'SIGUSR1'],
+        ],
+        'returns idmap plus OCI runtime lxc entries',
+    );
+
+    is_deeply(\@destroy_disks_calls, [], 'does not destroy disks after successful prepare');
+    is_deeply(\@run_command_calls, [['/bin/umount', "$tmpdir/.oci-replace-rootfs"]],
+        'unmounts the temporary rootfs');
+    ok(!-e "$tmpdir/.oci-replace-rootfs", 'removes temporary rootfs directory');
+};
+
+subtest 'destroys newly allocated rootfs if OCI extraction fails' => sub {
+    reset_state();
+    my $tmpdir = tempdir(CLEANUP => 1);
+    my $conf = dclone($base_conf);
+    my $orig_conf = dclone($conf);
+    $fail_restore = 1;
+
+    eval { run_create_oci_rootfs($conf, $tmpdir) };
+    like($@, qr/mocked OCI extraction failure/, 'propagates OCI extraction failure');
+    is_deeply($conf, $orig_conf, 'source CT config stays unchanged on extraction failure');
+    is(scalar(@mountpoint_mount_calls), 1, 'mounted the new rootfs before extraction failure');
+    is_deeply(\@run_command_calls, [['/bin/umount', "$tmpdir/.oci-replace-rootfs"]],
+        'unmounts temporary rootfs after extraction failure');
+    is_deeply(
+        \@destroy_disks_calls,
+        [[$storage_cfg, [$new_volid]]],
+        'destroys the newly allocated rootfs on extraction failure',
+    );
+    ok(!-e "$tmpdir/.oci-replace-rootfs", 'removes temporary rootfs directory after failure');
+};
+
+subtest 'destroys newly allocated rootfs if cleanup after successful extraction fails' => sub {
+    reset_state();
+    my $tmpdir = tempdir(CLEANUP => 1);
+    my $conf = dclone($base_conf);
+    my $orig_conf = dclone($conf);
+    $fail_umount = 1;
+
+    eval { run_create_oci_rootfs($conf, $tmpdir) };
+    like($@, qr/can't unmount temporary OCI rootfs path/, 'propagates cleanup failure');
+    is_deeply($conf, $orig_conf, 'source CT config stays unchanged on cleanup failure');
+    is_deeply(
+        \@destroy_disks_calls,
+        [[$storage_cfg, [$new_volid]]],
+        'destroys the newly allocated rootfs on cleanup failure',
+    );
+};
+
+done_testing();
diff --git a/src/test/run_oci_rootfs_replace_tests.pl b/src/test/run_oci_rootfs_replace_tests.pl
new file mode 100644
index 0000000..a13ae8e
--- /dev/null
+++ b/src/test/run_oci_rootfs_replace_tests.pl
@@ -0,0 +1,10 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+
+use TAP::Harness;
+
+my $harness = TAP::Harness->new({ "verbosity" => -2 });
+my $res = $harness->runtests("oci-rootfs-replace-test.pm");
+exit -1 if $res->{failed};
-- 
2.55.0.windows.2




  reply	other threads:[~2026-07-09  8:20 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-06 19:39 SPAM: [RFC PATCH 0/4] lxc: add safe OCI rootfs replacement copystring
2026-07-06 19:39 ` copystring [this message]
2026-07-06 19:39 ` SPAM: [RFC PATCH 2/4] api: lxc: add OCI rootfs replacement endpoint copystring
2026-07-06 19:39 ` SPAM: [RFC PATCH 3/4] pct: add OCI rootfs replacement command copystring
2026-07-06 19:39 ` SPAM: [RFC PATCH 4/4] test: cover OCI rootfs replacement API transaction copystring
2026-07-06 19:39 ` SPAM: [RFC PATCH pve-manager] lxc: add OCI rootfs replacement window copystring
2026-07-06 19:39 ` SPAM: [RFC PATCH pve-docs] pct: document OCI rootfs replacement semantics copystring
  -- strict thread matches above, loose matches on Subject: below --
2026-07-06 19:40 SPAM: [RFC PATCH 0/4] lxc: add safe OCI rootfs replacement copystring
2026-07-06 19:40 ` SPAM: [RFC PATCH 1/4] lxc: create: add isolated OCI rootfs preparation copystring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260706193934.279992-2-copystring@gmail.com \
    --to=copystring@gmail.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal