From: Hannes Laimer <h.laimer@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH docs/manager/network/proxmox{-perl-rs,-ve-rs} v3 0/9] add IPv6 RA / SLAAC support to EVPN zones
Date: Tue, 23 Jun 2026 14:56:17 +0200 [thread overview]
Message-ID: <20260623125626.1195681-1-h.laimer@proxmox.com> (raw)
This series adds IPv6 Router Advertisement / SLAAC support to EVPN zones.
RA settings sit on the vnet (`vnets.cfg`), per-prefix overrides on the subnet
(`subnets.cfg`). Defaults are chosen so that most IPv6 subnets work without
explicit per-prefix configuration.
It also enables `accept_untracked_na=2` on every EVPN vnet bridge that has an
IPv6 subnet, to keep first-packet IPv6 return traffic reliable in the
distributed anycast-gateway topology. The dedicated commit carries the full
rationale.
v3, thanks @Lukas S!:
- validation no longer rejects valid IPv6 subnets: non-/64 prefixes and IPv6
subnets using SNAT are accepted and editable again
- improve FRR config generation so a single malformed subnet or a non-member
node can no longer break it, and so configured prefix lifetimes are no
longer silently dropped
- cleaner EVPN gating and better per-prefix defaults, so most IPv6 subnets
work without explicit configuration
- cleanup UI, only persists meaningful settings
- some smaller fixups
proxmox-perl-rs:
Hannes Laimer (1):
pve-rs: sdn: add IPv6 RA builder binding
pve-rs/Makefile | 1 +
pve-rs/src/bindings/sdn/ipv6_ra.rs | 50 ++++++++++++++++++++++++++++++
pve-rs/src/bindings/sdn/mod.rs | 1 +
3 files changed, 52 insertions(+)
create mode 100644 pve-rs/src/bindings/sdn/ipv6_ra.rs
proxmox-ve-rs:
Hannes Laimer (2):
frr: add IPv6 router advertisement support
ve-config: add per-vnet IPv6 RA configuration
.../templates/frr.conf.jinja | 1 +
.../templates/nd_interfaces.jinja | 28 +++
proxmox-frr/src/ser/mod.rs | 6 +
proxmox-frr/src/ser/nd.rs | 75 ++++++++
proxmox-frr/src/ser/serializer.rs | 6 +-
proxmox-ve-config/src/sdn/config.rs | 146 +++++++++++++++-
proxmox-ve-config/src/sdn/mod.rs | 1 +
proxmox-ve-config/src/sdn/nd.rs | 131 ++++++++++++++
proxmox-ve-config/tests/nd/main.rs | 164 ++++++++++++++++++
.../nd__explicit_lifetimes_are_preserved.snap | 9 +
.../nd__mixed_subnets_under_one_vnet.snap | 14 ++
.../snapshots/nd__no_autoconfig_prefix.snap | 9 +
...sh64_prefix_defaults_to_no_autoconfig.snap | 9 +
.../nd__off_link_emits_off_link_modifier.snap | 9 +
...__preferred_lifetime_clamped_to_valid.snap | 9 +
...vel_optional_knobs_are_passed_through.snap | 12 ++
.../nd__slaac_with_default_lifetimes.snap | 9 +
17 files changed, 630 insertions(+), 8 deletions(-)
create mode 100644 proxmox-frr-templates/templates/nd_interfaces.jinja
create mode 100644 proxmox-frr/src/ser/nd.rs
create mode 100644 proxmox-ve-config/src/sdn/nd.rs
create mode 100644 proxmox-ve-config/tests/nd/main.rs
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__explicit_lifetimes_are_preserved.snap
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__mixed_subnets_under_one_vnet.snap
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__no_autoconfig_prefix.snap
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__non_slash64_prefix_defaults_to_no_autoconfig.snap
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__off_link_emits_off_link_modifier.snap
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__preferred_lifetime_clamped_to_valid.snap
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__ra_level_optional_knobs_are_passed_through.snap
create mode 100644 proxmox-ve-config/tests/nd/snapshots/nd__slaac_with_default_lifetimes.snap
pve-manager:
Hannes Laimer (1):
ui: sdn: add IPv6 RA / SLAAC support
www/manager6/form/SDNVnetSelector.js | 2 +-
www/manager6/sdn/SubnetEdit.js | 130 ++++++++++++++++-
www/manager6/sdn/SubnetView.js | 7 +-
www/manager6/sdn/VnetEdit.js | 202 ++++++++++++++++++++++++++-
www/manager6/sdn/VnetView.js | 6 +-
5 files changed, 339 insertions(+), 8 deletions(-)
pve-network:
Hannes Laimer (4):
sdn: evpn: add IPv6 RA / SLAAC support
sdn: evpn: derive IP version from CIDR for gateway-less subnets
sdn: evpn: accept untracked IPv6 NA on EVPN vnet bridges
api: vnet: include zone-type in vnet list
src/PVE/API2/Network/SDN/Vnets.pm | 13 +++
src/PVE/Network/SDN.pm | 1 +
src/PVE/Network/SDN/Controllers.pm | 21 ++++-
src/PVE/Network/SDN/Controllers/EvpnPlugin.pm | 22 ++++-
src/PVE/Network/SDN/Controllers/Plugin.pm | 2 +-
src/PVE/Network/SDN/SubnetPlugin.pm | 68 +++++++++++++++
src/PVE/Network/SDN/VnetPlugin.pm | 85 +++++++++++++++++++
src/PVE/Network/SDN/Zones/EvpnPlugin.pm | 24 ++++--
src/PVE/Network/SDN/Zones/Plugin.pm | 6 ++
.../expected_sdn_interfaces | 1 +
.../exitnode_snat/expected_sdn_interfaces | 1 +
.../exitnodenullroute/expected_sdn_interfaces | 1 +
.../evpn/ipv4ipv6/expected_sdn_interfaces | 1 +
.../ipv4ipv6nogateway/expected_sdn_interfaces | 1 +
.../zones/evpn/ipv6/expected_sdn_interfaces | 1 +
.../evpn/ipv6underlay/expected_sdn_interfaces | 1 +
.../evpn/slaac/expected_controller_config | 53 ++++++++++++
.../zones/evpn/slaac/expected_sdn_interfaces | 44 ++++++++++
src/test/zones/evpn/slaac/interfaces | 7 ++
src/test/zones/evpn/slaac/sdn_config | 41 +++++++++
20 files changed, 384 insertions(+), 10 deletions(-)
create mode 100644 src/test/zones/evpn/slaac/expected_controller_config
create mode 100644 src/test/zones/evpn/slaac/expected_sdn_interfaces
create mode 100644 src/test/zones/evpn/slaac/interfaces
create mode 100644 src/test/zones/evpn/slaac/sdn_config
pve-docs:
Hannes Laimer (1):
sdn: add IPv6 RA / SLAAC section
pvesdn.adoc | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
Summary over all repositories:
46 files changed, 1473 insertions(+), 26 deletions(-)
--
Generated by murpp 0.12.0
next reply other threads:[~2026-06-23 12:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-23 12:56 Hannes Laimer [this message]
2026-06-23 12:56 ` [PATCH proxmox-perl-rs v3 1/9] pve-rs: sdn: add IPv6 RA builder binding Hannes Laimer
2026-06-23 12:56 ` [PATCH proxmox-ve-rs v3 2/9] frr: add IPv6 router advertisement support Hannes Laimer
2026-06-23 12:56 ` [PATCH proxmox-ve-rs v3 3/9] ve-config: add per-vnet IPv6 RA configuration Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-manager v3 4/9] ui: sdn: add IPv6 RA / SLAAC support Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 5/9] sdn: evpn: " Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 6/9] sdn: evpn: derive IP version from CIDR for gateway-less subnets Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 7/9] sdn: evpn: accept untracked IPv6 NA on EVPN vnet bridges Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-network v3 8/9] api: vnet: include zone-type in vnet list Hannes Laimer
2026-06-23 12:56 ` [PATCH pve-docs v3 9/9] sdn: add IPv6 RA / SLAAC section Hannes Laimer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260623125626.1195681-1-h.laimer@proxmox.com \
--to=h.laimer@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox