From: David Riley <d.riley@proxmox.com>
To: pve-devel@lists.proxmox.com
Cc: David Riley <d.riley@proxmox.com>
Subject: [PATCH pve-network v3 5/5] fix #7520: config: prune orphaned ACLs and relocate moved VNets
Date: Wed, 3 Jun 2026 16:55:23 +0200 [thread overview]
Message-ID: <20260603145523.120075-6-d.riley@proxmox.com> (raw)
In-Reply-To: <20260603145523.120075-1-d.riley@proxmox.com>
Compare the running configuration with the newly compiled state during
config commit to identify and prune orphaned SDN ACL entries. This
ensures state consistency for manual applies via the UI/API as well as
during automatic configuration reloads on system boot.
Track configuration changes across:
* Zones
* VNets
* Fabrics
* Controllers
* Route maps
* Prefix lists
Trigger a validation check when a VNet is moved between zones to
mitigate potential ACL path conflicts. Abort the apply operation if a
conflict is detected to prevent configuration overwrites. If the path
is clear, relocate the ACLs to the updated zone path.
Suggested-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: David Riley <d.riley@proxmox.com>
---
src/PVE/Network/SDN.pm | 123 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/src/PVE/Network/SDN.pm b/src/PVE/Network/SDN.pm
index 33a3cf3..6a49621 100644
--- a/src/PVE/Network/SDN.pm
+++ b/src/PVE/Network/SDN.pm
@@ -12,6 +12,7 @@ use UUID;
use PVE::Cluster qw(cfs_read_file cfs_write_file cfs_lock_file);
use PVE::INotify;
+use PVE::AccessControl;
use PVE::RESTEnvironment qw(log_warn);
use PVE::RPCEnvironment;
use PVE::Tools qw(file_get_contents file_set_contents extract_param dir_glob_regex run_command);
@@ -238,11 +239,133 @@ sub compile_running_cfg {
}
sub commit_config {
+ my $old_cfg = cfs_read_file($RUNNING_CFG_FILENAME);
my $cfg = compile_running_cfg();
+ cleanup($old_cfg, $cfg);
+
cfs_write_file($RUNNING_CFG_FILENAME, $cfg);
}
+sub cleanup {
+ my ($old_cfg, $cfg) = @_;
+ return if !$old_cfg || !$cfg;
+
+ my $route_map_paths = diff_route_maps($old_cfg, $cfg);
+ my $generic_paths = diff_generic_resources($old_cfg, $cfg);
+ my ($vnet_delete_paths, $vnet_move_paths) = diff_vnets($old_cfg, $cfg);
+
+ if (@$vnet_move_paths) {
+ PVE::AccessControl::migrate_sdn_resource_access($vnet_move_paths);
+ }
+
+ my @paths_to_delete = (@$vnet_delete_paths, @$route_map_paths, @$generic_paths);
+ if (@paths_to_delete) {
+ PVE::AccessControl::remove_sdn_resource_access(\@paths_to_delete);
+ }
+
+}
+
+sub diff_generic_resources {
+ my ($old_cfg, $cfg) = @_;
+
+ my @paths_to_delete;
+
+ my @types = qw(zones controllers fabrics prefix-lists);
+ foreach my $type (@types) {
+ next if !$old_cfg->{$type} || !$old_cfg->{$type}->{ids};
+
+ my $old_ids = $old_cfg->{$type}->{ids};
+ my $new_ids = {};
+ if (my $type_block = $cfg->{$type}) {
+ $new_ids = $type_block->{ids} // {};
+ }
+
+ foreach my $id (keys %$old_ids) {
+ next if $new_ids->{$id};
+ push @paths_to_delete, [$type, $id];
+ }
+ }
+
+ return \@paths_to_delete;
+}
+
+sub diff_route_maps {
+ my ($old_cfg, $cfg) = @_;
+
+ my @paths_to_delete;
+
+ if ($old_cfg->{'route-maps'} && $old_cfg->{'route-maps'}->{ids}) {
+ my $old_route_maps = $old_cfg->{'route-maps'}->{ids};
+ my $route_map_suffix = qr/_\d+$/;
+
+ my %active_route_maps;
+ if ($cfg->{'route-maps'} && $cfg->{'route-maps'}->{ids}) {
+ foreach my $id (keys %{ $cfg->{'route-maps'}->{ids} }) {
+ (my $base_name = $id) =~ s/$route_map_suffix//;
+ $active_route_maps{$base_name} = 1;
+ }
+ }
+
+ my %queued_route_maps;
+ foreach my $id (keys %$old_route_maps) {
+ next if $cfg->{'route-maps'}->{ids}->{$id};
+
+ (my $base_name = $id) =~ s/$route_map_suffix//;
+ next if $active_route_maps{$base_name};
+ next if $queued_route_maps{$base_name};
+
+ push @paths_to_delete, ['route-maps', $base_name];
+ $queued_route_maps{$base_name} = 1;
+ }
+ }
+
+ return \@paths_to_delete;
+}
+
+sub diff_vnets {
+ my ($old_cfg, $cfg) = @_;
+
+ my @paths_to_delete;
+ my @paths_to_move;
+
+ if ($old_cfg->{vnets} && $old_cfg->{vnets}->{ids}) {
+ my $old_vnets = $old_cfg->{vnets}->{ids};
+ my $new_vnets = {};
+
+ if (my $vnet_cfg = $cfg->{vnets}) {
+ $new_vnets = $vnet_cfg->{ids} // {};
+ }
+
+ foreach my $vnetid (keys %$old_vnets) {
+ my $old_zone = $old_vnets->{$vnetid}->{zone};
+ my $new_zone;
+ $new_zone = $new_vnets->{$vnetid}->{zone} if $new_vnets->{$vnetid};
+
+ if (!$new_vnets->{$vnetid}) {
+ if ($old_zone) {
+ push @paths_to_delete, ['zones', $old_zone, $vnetid];
+ } else {
+ log_warn(
+ "SDN Cleanup: Could not find zone for deleted VNet $vnetid, skipping ACL"
+ . " cleanup");
+ }
+ next;
+ }
+
+ if ($old_zone && $new_zone && $old_zone ne $new_zone) {
+ push @paths_to_move,
+ {
+ src_path => ['zones', $old_zone, $vnetid],
+ dest_path => ['zones', $new_zone, $vnetid],
+ };
+ }
+ }
+ }
+
+ return (\@paths_to_delete, \@paths_to_move);
+}
+
sub has_pending_changes {
my $running_cfg = PVE::Network::SDN::running_config();
--
2.47.3
prev parent reply other threads:[~2026-06-03 14:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-03 14:55 [PATCH access-control/network v3 0/5] fix #7520: sdn: prune orphaned ACLs and handle VNet migrations David Riley
2026-06-03 14:55 ` [PATCH pve-access-control v3 1/5] fix: #7520: sdn: prune orphaned ACLs on resource deletion David Riley
2026-06-03 14:55 ` [PATCH pve-access-control v3 2/5] fix #7520: test: add unit tests for sdn acl pruning logic David Riley
2026-06-03 14:55 ` [PATCH pve-access-control v3 3/5] fix: #7520: sdn: add VNet ACL migration David Riley
2026-06-03 14:55 ` [PATCH pve-access-control v3 4/5] fix #7520: test: add unit tests for sdn acl migration logic David Riley
2026-06-03 14:55 ` David Riley [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260603145523.120075-6-d.riley@proxmox.com \
--to=d.riley@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox