From: Gabriel Goller <g.goller@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [PATCH pve-network 10/10] test: add test for frr.conf.local merging
Date: Tue, 3 Feb 2026 17:01:28 +0100 [thread overview]
Message-ID: <20260203160246.353351-22-g.goller@proxmox.com> (raw)
In-Reply-To: <20260203160246.353351-1-g.goller@proxmox.com>
Add a test that tests the frr.conf.local merging. This should ensure we
do not run into further regressions. The test also "succeeds" with the
pre-templates version, there are just some whitespace and "!" issues.
Also the route-maps are merged instead of pushed with higher sequence
number. This shouldn't change anything.
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
---
src/test/run_test_zones.pl | 16 ++++-
.../expected_controller_config | 61 +++++++++++++++++++
.../frr_local_merge/expected_sdn_interfaces | 42 +++++++++++++
.../zones/evpn/frr_local_merge/frr.conf.local | 30 +++++++++
.../zones/evpn/frr_local_merge/interfaces | 7 +++
.../zones/evpn/frr_local_merge/sdn_config | 24 ++++++++
6 files changed, 177 insertions(+), 3 deletions(-)
create mode 100644 src/test/zones/evpn/frr_local_merge/expected_controller_config
create mode 100644 src/test/zones/evpn/frr_local_merge/expected_sdn_interfaces
create mode 100644 src/test/zones/evpn/frr_local_merge/frr.conf.local
create mode 100644 src/test/zones/evpn/frr_local_merge/interfaces
create mode 100644 src/test/zones/evpn/frr_local_merge/sdn_config
diff --git a/src/test/run_test_zones.pl b/src/test/run_test_zones.pl
index 905b2f42e1dc..806225735e6b 100755
--- a/src/test/run_test_zones.pl
+++ b/src/test/run_test_zones.pl
@@ -126,12 +126,22 @@ foreach my $test (@tests) {
reload_controller => sub {
return;
},
- read_local_frr_config => sub {
- return;
- },
);
}
+ # Mock read_local_frr_config in PVE::Network::SDN::Frr to support testing frr.conf.local merging
+ my $frr_local_config;
+ my $frr_local_path = "./$test/frr.conf.local";
+ if (-e $frr_local_path) {
+ $frr_local_config = read_file($frr_local_path);
+ }
+ my $mocked_frr = Test::MockModule->new('PVE::Network::SDN::Frr');
+ $mocked_frr->mock(
+ read_local_frr_config => sub {
+ return $frr_local_config;
+ },
+ );
+
my $name = $test;
my $expected = read_file("./$test/expected_sdn_interfaces");
diff --git a/src/test/zones/evpn/frr_local_merge/expected_controller_config b/src/test/zones/evpn/frr_local_merge/expected_controller_config
new file mode 100644
index 000000000000..9d47e080bf7a
--- /dev/null
+++ b/src/test/zones/evpn/frr_local_merge/expected_controller_config
@@ -0,0 +1,61 @@
+frr version 10.4.1
+frr defaults datacenter
+hostname localhost
+log syslog informational
+service integrated-vtysh-config
+!
+vrf vrf_myzone
+ vni 1000
+exit-vrf
+!
+router bgp 65000
+ bgp router-id 192.168.0.1
+ no bgp hard-administrative-reset
+ no bgp default ipv4-unicast
+ coalesce-time 1000
+ no bgp graceful-restart notification
+ neighbor VTEP peer-group
+ neighbor VTEP remote-as 65000
+ neighbor VTEP bfd
+ neighbor 192.168.0.2 peer-group VTEP
+ neighbor 192.168.0.3 peer-group VTEP
+ neighbor 192.168.1.1 remote-as 65001
+ neighbor 192.168.1.1 description "External Peer"
+ address-family ipv4 unicast
+ neighbor VTEP activate
+ exit-address-family
+ !
+ address-family l2vpn evpn
+ neighbor VTEP activate
+ neighbor VTEP route-map MAP_VTEP_IN in
+ neighbor VTEP route-map MAP_VTEP_OUT out
+ advertise-svi-ip
+ advertise-all-vni
+ exit-address-family
+exit
+!
+router bgp 65000 vrf vrf_myzone
+ bgp router-id 192.168.0.1
+ no bgp hard-administrative-reset
+ no bgp graceful-restart notification
+exit
+!
+route-map MAP_VTEP_IN permit 1
+exit
+!
+route-map MAP_VTEP_OUT permit 1
+ set community 65000:100
+exit
+route-map MAP_VTEP_IN permit 2
+ set community 65000:200
+exit
+!
+ip prefix-list PL_ALLOW seq 10 permit 10.0.0.0/8 le 24
+route-map CUSTOM_MAP permit 10
+ match ip address prefix-list PL_ALLOW
+exit
+!
+bgp community-list standard CL_LOCAL permit 65000:200
+!
+line vty
+!
diff --git a/src/test/zones/evpn/frr_local_merge/expected_sdn_interfaces b/src/test/zones/evpn/frr_local_merge/expected_sdn_interfaces
new file mode 100644
index 000000000000..9d1c64c0f3fa
--- /dev/null
+++ b/src/test/zones/evpn/frr_local_merge/expected_sdn_interfaces
@@ -0,0 +1,42 @@
+#version:1
+
+auto myvnet
+iface myvnet
+ address 10.0.0.1/24
+ hwaddress A2:1D:CB:1A:C0:8B
+ bridge_ports vxlan_myvnet
+ bridge_stp off
+ bridge_fd 0
+ mtu 1450
+ ip-forward on
+ arp-accept on
+ vrf vrf_myzone
+
+auto vrf_myzone
+iface vrf_myzone
+ vrf-table auto
+ post-up ip route add vrf vrf_myzone unreachable default metric 4278198272
+
+auto vrfbr_myzone
+iface vrfbr_myzone
+ bridge-ports vrfvx_myzone
+ bridge_stp off
+ bridge_fd 0
+ mtu 1450
+ vrf vrf_myzone
+
+auto vrfvx_myzone
+iface vrfvx_myzone
+ vxlan-id 1000
+ vxlan-local-tunnelip 192.168.0.1
+ bridge-learning off
+ bridge-arp-nd-suppress on
+ mtu 1450
+
+auto vxlan_myvnet
+iface vxlan_myvnet
+ vxlan-id 100
+ vxlan-local-tunnelip 192.168.0.1
+ bridge-learning off
+ bridge-arp-nd-suppress on
+ mtu 1450
diff --git a/src/test/zones/evpn/frr_local_merge/frr.conf.local b/src/test/zones/evpn/frr_local_merge/frr.conf.local
new file mode 100644
index 000000000000..a08f805cdabc
--- /dev/null
+++ b/src/test/zones/evpn/frr_local_merge/frr.conf.local
@@ -0,0 +1,30 @@
+!
+! Custom FRR configuration to be merged
+!
+router bgp 65000
+ neighbor 192.168.1.1 remote-as 65001
+ neighbor 192.168.1.1 description "External Peer"
+ address-family l2vpn evpn
+ advertise-svi-ip
+ exit-address-family
+ address-family ipv4 unicast
+ neighbor VTEP activate
+ exit-address-family
+exit
+!
+route-map MAP_VTEP_OUT permit 1
+ set community 65000:100
+exit
+!
+route-map MAP_VTEP_IN permit 2
+ set community 65000:200
+exit
+!
+ip prefix-list PL_ALLOW seq 10 permit 10.0.0.0/8 le 24
+!
+route-map CUSTOM_MAP permit 10
+ match ip address prefix-list PL_ALLOW
+exit
+!
+bgp community-list standard CL_LOCAL permit 65000:200
+!
diff --git a/src/test/zones/evpn/frr_local_merge/interfaces b/src/test/zones/evpn/frr_local_merge/interfaces
new file mode 100644
index 000000000000..66bb826a44b3
--- /dev/null
+++ b/src/test/zones/evpn/frr_local_merge/interfaces
@@ -0,0 +1,7 @@
+auto vmbr0
+iface vmbr0 inet static
+ address 192.168.0.1/24
+ gateway 192.168.0.254
+ bridge-ports eth0
+ bridge-stp off
+ bridge-fd 0
diff --git a/src/test/zones/evpn/frr_local_merge/sdn_config b/src/test/zones/evpn/frr_local_merge/sdn_config
new file mode 100644
index 000000000000..d6e44b7593c2
--- /dev/null
+++ b/src/test/zones/evpn/frr_local_merge/sdn_config
@@ -0,0 +1,24 @@
+{
+ version => 1,
+ vnets => {
+ ids => {
+ myvnet => { tag => "100", type => "vnet", zone => "myzone" },
+ },
+ },
+
+ zones => {
+ ids => { myzone => { ipam => "pve", type => "evpn", controller => "evpnctl", 'vrf-vxlan' => 1000, 'mac' => 'A2:1D:CB:1A:C0:8B' } },
+ },
+ controllers => {
+ ids => { evpnctl => { type => "evpn", 'peers' => '192.168.0.1,192.168.0.2,192.168.0.3', asn => "65000" } },
+ },
+
+ subnets => {
+ ids => { 'myzone-10.0.0.0-24' => {
+ 'type' => 'subnet',
+ 'vnet' => 'myvnet',
+ 'gateway' => '10.0.0.1',
+ }
+ }
+ }
+}
--
2.47.3
next prev parent reply other threads:[~2026-02-03 16:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-03 16:01 [PATCH docs/manager/network/proxmox{-ve-rs,-perl-rs} 00/23] Generate frr config using jinja templates and rust types Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 1/9] ve-config: firewall: cargo fmt Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 2/9] frr: add proxmox-frr-templates package that contains templates Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 3/9] ve-config: remove FrrConfigBuilder struct Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 4/9] sdn-types: support variable-length NET identifier Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 5/9] frr: add template serializer and serialize fabrics using templates Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 6/9] frr: add isis configuration and templates Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 7/9] frr: support custom frr configuration lines Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 8/9] frr: add bgp support with templates and serialization Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-ve-rs 9/9] frr: store frr template content as a const map Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-perl-rs 1/2] sdn: add function to generate the frr config for all daemons Gabriel Goller
2026-02-03 16:01 ` [PATCH proxmox-perl-rs 2/2] sdn: add method to get a frr template Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 01/10] sdn: remove duplicate comment line '!' in frr config Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 02/10] sdn: tests: add missing comment " Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 03/10] tests: use Test::Differences to make test assertions Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 04/10] sdn: write structured frr config that can be rendered using templates Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 05/10] tests: rearrange some statements in the frr config Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 06/10] sdn: adjust frr.conf.local merging to rust template types Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 07/10] cli: add pvesdn cli tool for managing frr template overrides Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 08/10] debian: handle user modifications to FRR templates via ucf Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-network 09/10] api: add dry-run endpoint for sdn apply to preview changes Gabriel Goller
2026-02-03 16:01 ` Gabriel Goller [this message]
2026-02-03 16:01 ` [PATCH pve-manager 1/1] sdn: add dry-run view for sdn apply Gabriel Goller
2026-02-03 16:01 ` [PATCH pve-docs 1/1] docs: add man page for the `pvesdn` cli Gabriel Goller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260203160246.353351-22-g.goller@proxmox.com \
--to=g.goller@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox