* [pve-devel] [PATCH-SERIES qemu-server v2 0/5] guest agent: better handle lost freeze command
@ 2025-09-09 13:25 Fiona Ebner
2025-09-09 13:25 ` [pve-devel] [PATCH qemu-server v2 1/5] api: agent: improve module imports Fiona Ebner
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Fiona Ebner @ 2025-09-09 13:25 UTC (permalink / raw)
To: pve-devel
Changes in v2:
* Rebase on current master.
* Drop already applied patches.
* Slightly improve log messages.
* Slightly improve commit messages.
The main bit of the series is patch "agent: implement fsfreeze helper
to better handle lost commands".
As reported in the enterprise support, it can happen that a guest
agent command is read, but then the guest agent never sends an answer,
because the service in the guest is stopped/killed. For example, if a
guest reboot happens before the command can be successfully executed.
This is usually not problematic, but the fsfreeze-freeze command has a
timeout of 1 hour, so the guest agent socket would be blocked for that
amount of time, waiting on a command that is not being executed
anymore.
Use a lower timeout for the fsfreeze-freeze command, and issue an
fsfreeze-status command afterwards, which will return immediately if
the fsfreeze-freeze command already finished, and which will be queued
if not. This is used as a proxy to determine whether the
fsfreeze-freeze command is still running and to check whether it was
successful. Like this, the time the socket is blocked after a "lost
command" is at most 10 minutes.
The rest of the series is preparation and cleanups.
Fiona Ebner (5):
api: agent: improve module imports
qmp client: remove erroneous comment
agent: implement fsfreeze helper to better handle lost commands
agent: prefer usage of get_qga_key() helper
agent: move guest agent format and parsing to agent module
src/PVE/API2/Qemu.pm | 4 +-
src/PVE/API2/Qemu/Agent.pm | 9 ++-
src/PVE/QMPClient.pm | 5 +-
src/PVE/QemuConfig.pm | 6 +-
src/PVE/QemuMigrate.pm | 3 +-
src/PVE/QemuServer.pm | 54 +--------------
src/PVE/QemuServer/Agent.pm | 122 +++++++++++++++++++++++++++++++++
src/PVE/QemuServer/BlockJob.pm | 2 +-
src/PVE/VZDump/QemuServer.pm | 7 +-
9 files changed, 146 insertions(+), 66 deletions(-)
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [pve-devel] [PATCH qemu-server v2 1/5] api: agent: improve module imports
2025-09-09 13:25 [pve-devel] [PATCH-SERIES qemu-server v2 0/5] guest agent: better handle lost freeze command Fiona Ebner
@ 2025-09-09 13:25 ` Fiona Ebner
2025-09-09 13:25 ` [pve-devel] [PATCH qemu-server v2 2/5] qmp client: remove erroneous comment Fiona Ebner
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Fiona Ebner @ 2025-09-09 13:25 UTC (permalink / raw)
To: pve-devel
Order module import according to the style guide and add missing
PVE::QemuConfig import.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
src/PVE/API2/Qemu/Agent.pm | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/src/PVE/API2/Qemu/Agent.pm b/src/PVE/API2/Qemu/Agent.pm
index a083ed62..de36ce1e 100644
--- a/src/PVE/API2/Qemu/Agent.pm
+++ b/src/PVE/API2/Qemu/Agent.pm
@@ -3,13 +3,16 @@ package PVE::API2::Qemu::Agent;
use strict;
use warnings;
-use PVE::RESTHandler;
+use JSON;
+use MIME::Base64 qw(encode_base64 decode_base64);
+
use PVE::JSONSchema qw(get_standard_option);
+use PVE::RESTHandler;
+
+use PVE::QemuConfig;
use PVE::QemuServer;
use PVE::QemuServer::Agent qw(agent_cmd check_agent_error);
use PVE::QemuServer::Monitor qw(mon_cmd);
-use MIME::Base64 qw(encode_base64 decode_base64);
-use JSON;
use base qw(PVE::RESTHandler);
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [pve-devel] [PATCH qemu-server v2 2/5] qmp client: remove erroneous comment
2025-09-09 13:25 [pve-devel] [PATCH-SERIES qemu-server v2 0/5] guest agent: better handle lost freeze command Fiona Ebner
2025-09-09 13:25 ` [pve-devel] [PATCH qemu-server v2 1/5] api: agent: improve module imports Fiona Ebner
@ 2025-09-09 13:25 ` Fiona Ebner
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 3/5] agent: implement fsfreeze helper to better handle lost commands Fiona Ebner
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Fiona Ebner @ 2025-09-09 13:25 UTC (permalink / raw)
To: pve-devel
This is most likely a left-over from copy-pasting from an example in
the 'IO::Multiplex' man page. In particular, the method is not called
every second.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
src/PVE/QMPClient.pm | 1 -
1 file changed, 1 deletion(-)
diff --git a/src/PVE/QMPClient.pm b/src/PVE/QMPClient.pm
index 7b19be9d..68ce0edb 100644
--- a/src/PVE/QMPClient.pm
+++ b/src/PVE/QMPClient.pm
@@ -479,7 +479,6 @@ sub mux_input {
&$check_queue($self);
}
-# This gets called every second to update player info, etc...
sub mux_timeout {
my ($self, $mux, $fh) = @_;
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [pve-devel] [PATCH qemu-server v2 3/5] agent: implement fsfreeze helper to better handle lost commands
2025-09-09 13:25 [pve-devel] [PATCH-SERIES qemu-server v2 0/5] guest agent: better handle lost freeze command Fiona Ebner
2025-09-09 13:25 ` [pve-devel] [PATCH qemu-server v2 1/5] api: agent: improve module imports Fiona Ebner
2025-09-09 13:25 ` [pve-devel] [PATCH qemu-server v2 2/5] qmp client: remove erroneous comment Fiona Ebner
@ 2025-09-09 13:26 ` Fiona Ebner
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 4/5] agent: prefer usage of get_qga_key() helper Fiona Ebner
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 5/5] agent: move guest agent format and parsing to agent module Fiona Ebner
4 siblings, 0 replies; 6+ messages in thread
From: Fiona Ebner @ 2025-09-09 13:26 UTC (permalink / raw)
To: pve-devel
As reported in the enterprise support, it can happen that a guest
agent command is read, but then the guest agent never sends an answer,
because the service in the guest is stopped/killed. For example, if a
guest reboot happens before the command can be successfully executed.
This is usually not problematic, but the fsfreeze-freeze command has a
timeout of 1 hour, so the guest agent socket would be blocked for that
amount of time, waiting on a command that is not being executed
anymore.
Use a lower timeout for the initial fsfreeze-freeze command, and issue
an fsfreeze-status command afterwards, which will return immediately
if the fsfreeze-freeze command already finished, and which will be
queued if not. This is used as a proxy to determine whether the
fsfreeze-freeze command is still running and to check whether it was
successful. Using a too low timeout would mean stuffing/queuing many
fsfreeze-status commands while the guest agent might still be busy
actually doing the freeze. In total, fsfreeze-freeze is still allowed
to take 1 hour, but the time the socket is blocked after a
"lost command" is at most 10 minutes.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
Changes in v2:
* Slightly improve log messages.
* Use POD for documentation.
* Mention why not an even lower timeout is used in commit message.
src/PVE/QMPClient.pm | 4 ++
src/PVE/QemuConfig.pm | 4 +-
src/PVE/QemuServer/Agent.pm | 68 ++++++++++++++++++++++++++++++++++
src/PVE/QemuServer/BlockJob.pm | 2 +-
src/PVE/VZDump/QemuServer.pm | 4 +-
5 files changed, 77 insertions(+), 5 deletions(-)
diff --git a/src/PVE/QMPClient.pm b/src/PVE/QMPClient.pm
index 68ce0edb..1935a336 100644
--- a/src/PVE/QMPClient.pm
+++ b/src/PVE/QMPClient.pm
@@ -110,6 +110,8 @@ sub cmd {
} elsif ($cmd->{execute} =~ m/^(eject|change)/) {
$timeout = 60; # note: cdrom mount command is slow
} elsif ($cmd->{execute} eq 'guest-fsfreeze-freeze') {
+ # consider using the guest_fsfreeze() helper in Agent.pm
+ #
# freeze syncs all guest FS, if we kill it it stays in an unfreezable
# locked state with high probability, so use an generous timeout
$timeout = 60 * 60; # 1 hour
@@ -158,6 +160,7 @@ sub cmd {
if (defined($queue_info->{error})) {
die "VM $vmid qmp command '$cmd->{execute}' failed - $queue_info->{error}" if !$noerr;
$result = { error => $queue_info->{error} };
+ $result->{'error-is-timeout'} = 1 if $queue_info->{'error-is-timeout'};
}
return $result;
@@ -484,6 +487,7 @@ sub mux_timeout {
if (my $queue_info = &$lookup_queue_info($self, $fh)) {
$queue_info->{error} = "got timeout\n";
+ $queue_info->{'error-is-timeout'} = 1;
$self->{mux}->inbuffer($fh, ''); # clear to avoid warnings
}
diff --git a/src/PVE/QemuConfig.pm b/src/PVE/QemuConfig.pm
index d0844c4c..97b2e8a5 100644
--- a/src/PVE/QemuConfig.pm
+++ b/src/PVE/QemuConfig.pm
@@ -312,8 +312,8 @@ sub __snapshot_freeze {
eval { mon_cmd($vmid, "guest-fsfreeze-thaw"); };
warn "guest-fsfreeze-thaw problems - $@" if $@;
} else {
- eval { mon_cmd($vmid, "guest-fsfreeze-freeze"); };
- warn "guest-fsfreeze-freeze problems - $@" if $@;
+ eval { PVE::QemuServer::Agent::guest_fsfreeze($vmid); };
+ warn $@ if $@;
}
}
diff --git a/src/PVE/QemuServer/Agent.pm b/src/PVE/QemuServer/Agent.pm
index ee48e83e..9ec9c1de 100644
--- a/src/PVE/QemuServer/Agent.pm
+++ b/src/PVE/QemuServer/Agent.pm
@@ -131,4 +131,72 @@ sub qemu_exec_status {
return $res;
}
+=head3 guest_fsfreeze
+
+ guest_fsfreeze($vmid);
+
+Freeze the file systems of the guest C<$vmid>. Check that the guest agent is enabled and running
+before calling this function. Dies if the file systems cannot be frozen.
+
+With C<mon_cmd()>, it can happen that a guest agent command is read, but then the guest agent never
+sends an answer, because the service in the guest is stopped/killed. For example, if a guest reboot
+happens before the command can be successfully executed. This is usually not problematic, but the
+fsfreeze-freeze command should use a timeout of 1 hour, so the guest agent socket would be blocked
+for that amount of time, waiting on a command that is not being executed anymore.
+
+This function uses a lower timeout for the initial fsfreeze-freeze command, and issues an
+fsfreeze-status command afterwards, which will return immediately if the fsfreeze-freeze command
+already finished, and which will be queued if not. This is used as a proxy to determine whether the
+fsfreeze-freeze command is still running and to check whether it was successful. Using a too low
+timeout would mean stuffing/queuing many fsfreeze-status commands while the guest agent might still
+be busy actually doing the freeze. In total, fsfreeze-freeze is still allowed to take 1 hour, but
+the time the socket is blocked after a lost command is at most 10 minutes.
+
+=cut
+
+sub guest_fsfreeze {
+ my ($vmid) = @_;
+
+ my $timeout = 10 * 60;
+
+ my $result = eval {
+ PVE::QemuServer::Monitor::mon_cmd($vmid, 'guest-fsfreeze-freeze', timeout => $timeout);
+ };
+ if ($result && ref($result) eq 'HASH' && $result->{error}) {
+ my $error = $result->{error}->{desc} // 'unknown';
+ die "unable to freeze guest fs - $error\n";
+ } elsif (defined($result)) {
+ return; # command successful
+ }
+
+ my $status;
+ eval {
+ my ($i, $last_iteration) = (0, 5);
+ while ($i < $last_iteration && !defined($status)) {
+ print "still waiting on guest fs freeze - timeout in "
+ . ($timeout * ($last_iteration - $i) / 60)
+ . " minutes\n";
+ $i++;
+
+ $status = PVE::QemuServer::Monitor::mon_cmd(
+ $vmid, 'guest-fsfreeze-status',
+ timeout => $timeout,
+ noerr => 1,
+ );
+
+ if ($status && ref($status) eq 'HASH' && $status->{'error-is-timeout'}) {
+ $status = undef;
+ } else {
+ check_agent_error($status, 'unknown error');
+ }
+ }
+ if (!defined($status)) {
+ die "timeout after " . ($timeout * ($last_iteration + 1) / 60) . " minutes\n";
+ }
+ };
+ die "querying status after freezing guest fs failed - $@" if $@;
+
+ die "unable to freeze guest fs - unexpected status '$status'\n" if $status ne 'frozen';
+}
+
1;
diff --git a/src/PVE/QemuServer/BlockJob.pm b/src/PVE/QemuServer/BlockJob.pm
index 633c0b34..506010e1 100644
--- a/src/PVE/QemuServer/BlockJob.pm
+++ b/src/PVE/QemuServer/BlockJob.pm
@@ -165,7 +165,7 @@ sub qemu_drive_mirror_monitor {
my $agent_running = $qga && qga_check_running($vmid);
if ($agent_running) {
print "freeze filesystem\n";
- eval { mon_cmd($vmid, "guest-fsfreeze-freeze"); };
+ eval { PVE::QemuServer::Agent::guest_fsfreeze($vmid); };
warn $@ if $@;
} else {
print "suspend vm\n";
diff --git a/src/PVE/VZDump/QemuServer.pm b/src/PVE/VZDump/QemuServer.pm
index 5b94c369..23ac74f7 100644
--- a/src/PVE/VZDump/QemuServer.pm
+++ b/src/PVE/VZDump/QemuServer.pm
@@ -1103,10 +1103,10 @@ sub qga_fs_freeze {
}
$self->loginfo("issuing guest-agent 'fs-freeze' command");
- eval { mon_cmd($vmid, "guest-fsfreeze-freeze") };
+ eval { PVE::QemuServer::Agent::guest_fsfreeze($vmid); };
$self->logerr($@) if $@;
- return 1; # even on mon command error, ensure we always thaw again
+ return 1; # even on error, ensure we always thaw again
}
# only call if fs_freeze return 1
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [pve-devel] [PATCH qemu-server v2 4/5] agent: prefer usage of get_qga_key() helper
2025-09-09 13:25 [pve-devel] [PATCH-SERIES qemu-server v2 0/5] guest agent: better handle lost freeze command Fiona Ebner
` (2 preceding siblings ...)
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 3/5] agent: implement fsfreeze helper to better handle lost commands Fiona Ebner
@ 2025-09-09 13:26 ` Fiona Ebner
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 5/5] agent: move guest agent format and parsing to agent module Fiona Ebner
4 siblings, 0 replies; 6+ messages in thread
From: Fiona Ebner @ 2025-09-09 13:26 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
src/PVE/QemuConfig.pm | 2 +-
src/PVE/QemuMigrate.pm | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/src/PVE/QemuConfig.pm b/src/PVE/QemuConfig.pm
index 97b2e8a5..91eb0076 100644
--- a/src/PVE/QemuConfig.pm
+++ b/src/PVE/QemuConfig.pm
@@ -297,7 +297,7 @@ sub __snapshot_check_freeze_needed {
return (
$running,
$running
- && PVE::QemuServer::parse_guest_agent($config)->{enabled}
+ && PVE::QemuServer::get_qga_key($config, 'enabled')
&& PVE::QemuServer::Agent::qga_check_running($vmid),
);
} else {
diff --git a/src/PVE/QemuMigrate.pm b/src/PVE/QemuMigrate.pm
index 4381b542..3f6f12be 100644
--- a/src/PVE/QemuMigrate.pm
+++ b/src/PVE/QemuMigrate.pm
@@ -1719,7 +1719,7 @@ sub phase3_cleanup {
if (
$self->{storage_migration}
- && PVE::QemuServer::parse_guest_agent($conf)->{fstrim_cloned_disks}
+ && PVE::QemuServer::get_qga_key($conf, 'fstrim_cloned_disks')
&& $self->{running}
) {
if (!$self->{vm_was_paused}) {
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [pve-devel] [PATCH qemu-server v2 5/5] agent: move guest agent format and parsing to agent module
2025-09-09 13:25 [pve-devel] [PATCH-SERIES qemu-server v2 0/5] guest agent: better handle lost freeze command Fiona Ebner
` (3 preceding siblings ...)
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 4/5] agent: prefer usage of get_qga_key() helper Fiona Ebner
@ 2025-09-09 13:26 ` Fiona Ebner
4 siblings, 0 replies; 6+ messages in thread
From: Fiona Ebner @ 2025-09-09 13:26 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
src/PVE/API2/Qemu.pm | 4 +--
src/PVE/QemuConfig.pm | 2 +-
src/PVE/QemuMigrate.pm | 3 +-
src/PVE/QemuServer.pm | 54 ++----------------------------------
src/PVE/QemuServer/Agent.pm | 54 ++++++++++++++++++++++++++++++++++++
src/PVE/VZDump/QemuServer.pm | 3 +-
6 files changed, 63 insertions(+), 57 deletions(-)
diff --git a/src/PVE/API2/Qemu.pm b/src/PVE/API2/Qemu.pm
index c7929dbb..11d9091e 100644
--- a/src/PVE/API2/Qemu.pm
+++ b/src/PVE/API2/Qemu.pm
@@ -3324,7 +3324,7 @@ __PACKAGE__->register_method({
$status->{spice} = 1 if $spice;
$status->{clipboard} = $vga->{clipboard};
}
- $status->{agent} = 1 if PVE::QemuServer::get_qga_key($conf, 'enabled');
+ $status->{agent} = 1 if PVE::QemuServer::Agent::get_qga_key($conf, 'enabled');
return $status;
},
@@ -4789,7 +4789,7 @@ __PACKAGE__->register_method({
PVE::QemuConfig->write_config($vmid, $conf);
- my $do_trim = PVE::QemuServer::get_qga_key($conf, 'fstrim_cloned_disks');
+ my $do_trim = PVE::QemuServer::Agent::get_qga_key($conf, 'fstrim_cloned_disks');
if ($running && $do_trim && PVE::QemuServer::Agent::qga_check_running($vmid)) {
eval { mon_cmd($vmid, "guest-fstrim") };
}
diff --git a/src/PVE/QemuConfig.pm b/src/PVE/QemuConfig.pm
index 91eb0076..bb469197 100644
--- a/src/PVE/QemuConfig.pm
+++ b/src/PVE/QemuConfig.pm
@@ -297,7 +297,7 @@ sub __snapshot_check_freeze_needed {
return (
$running,
$running
- && PVE::QemuServer::get_qga_key($config, 'enabled')
+ && PVE::QemuServer::Agent::get_qga_key($config, 'enabled')
&& PVE::QemuServer::Agent::qga_check_running($vmid),
);
} else {
diff --git a/src/PVE/QemuMigrate.pm b/src/PVE/QemuMigrate.pm
index 3f6f12be..82af9fc1 100644
--- a/src/PVE/QemuMigrate.pm
+++ b/src/PVE/QemuMigrate.pm
@@ -27,6 +27,7 @@ use PVE::Tunnel;
use PVE::QemuConfig;
use PVE::QemuMigrate::Helpers;
+use PVE::QemuServer::Agent;
use PVE::QemuServer::BlockJob;
use PVE::QemuServer::CPUConfig;
use PVE::QemuServer::Drive qw(checked_volume_format);
@@ -1719,7 +1720,7 @@ sub phase3_cleanup {
if (
$self->{storage_migration}
- && PVE::QemuServer::get_qga_key($conf, 'fstrim_cloned_disks')
+ && PVE::QemuServer::Agent::get_qga_key($conf, 'fstrim_cloned_disks')
&& $self->{running}
) {
if (!$self->{vm_was_paused}) {
diff --git a/src/PVE/QemuServer.pm b/src/PVE/QemuServer.pm
index bf229610..cb93bf45 100644
--- a/src/PVE/QemuServer.pm
+++ b/src/PVE/QemuServer.pm
@@ -53,7 +53,7 @@ use PVE::QMPClient;
use PVE::QemuConfig;
use PVE::QemuConfig::NoWrite;
use PVE::QemuMigrate::Helpers;
-use PVE::QemuServer::Agent qw(qga_check_running);
+use PVE::QemuServer::Agent qw(get_qga_key parse_guest_agent qga_check_running);
use PVE::QemuServer::Blockdev;
use PVE::QemuServer::BlockJob;
use PVE::QemuServer::Helpers
@@ -147,35 +147,6 @@ my $watchdog_fmt = {
};
PVE::JSONSchema::register_format('pve-qm-watchdog', $watchdog_fmt);
-my $agent_fmt = {
- enabled => {
- description =>
- "Enable/disable communication with a QEMU Guest Agent (QGA) running in the VM.",
- type => 'boolean',
- default => 0,
- default_key => 1,
- },
- fstrim_cloned_disks => {
- description => "Run fstrim after moving a disk or migrating the VM.",
- type => 'boolean',
- optional => 1,
- default => 0,
- },
- 'freeze-fs-on-backup' => {
- description => "Freeze/thaw guest filesystems on backup for consistency.",
- type => 'boolean',
- optional => 1,
- default => 1,
- },
- type => {
- description => "Select the agent type",
- type => 'string',
- default => 'virtio',
- optional => 1,
- enum => [qw(virtio isa)],
- },
-};
-
my $vga_fmt = {
type => {
description => "Select the VGA type. Using type 'cirrus' is not recommended.",
@@ -471,7 +442,7 @@ EODESC
description =>
"Enable/disable communication with the QEMU Guest Agent and its properties.",
type => 'string',
- format => $agent_fmt,
+ format => $PVE::QemuServer::Agent::agent_fmt,
},
kvm => {
optional => 1,
@@ -1791,27 +1762,6 @@ sub parse_watchdog {
return $res;
}
-sub parse_guest_agent {
- my ($conf) = @_;
-
- return {} if !defined($conf->{agent});
-
- my $res = eval { parse_property_string($agent_fmt, $conf->{agent}) };
- warn $@ if $@;
-
- # if the agent is disabled ignore the other potentially set properties
- return {} if !$res->{enabled};
- return $res;
-}
-
-sub get_qga_key {
- my ($conf, $key) = @_;
- return undef if !defined($conf->{agent});
-
- my $agent = parse_guest_agent($conf);
- return $agent->{$key};
-}
-
sub parse_vga {
my ($value) = @_;
diff --git a/src/PVE/QemuServer/Agent.pm b/src/PVE/QemuServer/Agent.pm
index 9ec9c1de..5d88b7bd 100644
--- a/src/PVE/QemuServer/Agent.pm
+++ b/src/PVE/QemuServer/Agent.pm
@@ -6,6 +6,8 @@ use warnings;
use JSON;
use MIME::Base64 qw(decode_base64 encode_base64);
+use PVE::JSONSchema;
+
use PVE::QemuServer::Helpers;
use PVE::QemuServer::Monitor;
@@ -14,9 +16,61 @@ use base 'Exporter';
our @EXPORT_OK = qw(
check_agent_error
agent_cmd
+ get_qga_key
+ parse_guest_agent
qga_check_running
);
+our $agent_fmt = {
+ enabled => {
+ description =>
+ "Enable/disable communication with a QEMU Guest Agent (QGA) running in the VM.",
+ type => 'boolean',
+ default => 0,
+ default_key => 1,
+ },
+ fstrim_cloned_disks => {
+ description => "Run fstrim after moving a disk or migrating the VM.",
+ type => 'boolean',
+ optional => 1,
+ default => 0,
+ },
+ 'freeze-fs-on-backup' => {
+ description => "Freeze/thaw guest filesystems on backup for consistency.",
+ type => 'boolean',
+ optional => 1,
+ default => 1,
+ },
+ type => {
+ description => "Select the agent type",
+ type => 'string',
+ default => 'virtio',
+ optional => 1,
+ enum => [qw(virtio isa)],
+ },
+};
+
+sub parse_guest_agent {
+ my ($conf) = @_;
+
+ return {} if !defined($conf->{agent});
+
+ my $res = eval { PVE::JSONSchema::parse_property_string($agent_fmt, $conf->{agent}) };
+ warn $@ if $@;
+
+ # if the agent is disabled ignore the other potentially set properties
+ return {} if !$res->{enabled};
+ return $res;
+}
+
+sub get_qga_key {
+ my ($conf, $key) = @_;
+ return undef if !defined($conf->{agent});
+
+ my $agent = parse_guest_agent($conf);
+ return $agent->{$key};
+}
+
sub qga_check_running {
my ($vmid, $nowarn) = @_;
diff --git a/src/PVE/VZDump/QemuServer.pm b/src/PVE/VZDump/QemuServer.pm
index 23ac74f7..1addfa24 100644
--- a/src/PVE/VZDump/QemuServer.pm
+++ b/src/PVE/VZDump/QemuServer.pm
@@ -1096,7 +1096,8 @@ sub qga_fs_freeze {
return;
}
- my $freeze = PVE::QemuServer::get_qga_key($self->{vmlist}->{$vmid}, 'freeze-fs-on-backup') // 1;
+ my $freeze =
+ PVE::QemuServer::Agent::get_qga_key($self->{vmlist}->{$vmid}, 'freeze-fs-on-backup') // 1;
if (!$freeze) {
$self->loginfo("skipping guest-agent 'fs-freeze', disabled in VM options");
return;
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2025-09-09 13:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-09-09 13:25 [pve-devel] [PATCH-SERIES qemu-server v2 0/5] guest agent: better handle lost freeze command Fiona Ebner
2025-09-09 13:25 ` [pve-devel] [PATCH qemu-server v2 1/5] api: agent: improve module imports Fiona Ebner
2025-09-09 13:25 ` [pve-devel] [PATCH qemu-server v2 2/5] qmp client: remove erroneous comment Fiona Ebner
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 3/5] agent: implement fsfreeze helper to better handle lost commands Fiona Ebner
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 4/5] agent: prefer usage of get_qga_key() helper Fiona Ebner
2025-09-09 13:26 ` [pve-devel] [PATCH qemu-server v2 5/5] agent: move guest agent format and parsing to agent module Fiona Ebner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox