From: Fiona Ebner <f.ebner@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [RFC qemu-server 13/15] print drive device: don't reference any drive for 'none' starting with machine version 10.0
Date: Mon, 23 Jun 2025 17:44:23 +0200 [thread overview]
Message-ID: <20250623154433.449277-14-f.ebner@proxmox.com> (raw)
In-Reply-To: <20250623154433.449277-1-f.ebner@proxmox.com>
There will be no block node for 'none' after switching to '-blockdev'.
Co-developed-by: Alexandre Derumier <alexandre.derumier@groupe-cyllene.com>
[FE: split out from larger patch
do it also for non-SCSI cases]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
---
RFC, should be applied with the final switch to blockdev.
Changes since last time:
* udpate tests
src/PVE/QemuServer.pm | 18 +++++++++++++++---
src/test/cfg2cmd/bootorder-empty.conf.cmd | 2 +-
src/test/cfg2cmd/bootorder-legacy.conf.cmd | 2 +-
src/test/cfg2cmd/bootorder.conf.cmd | 2 +-
...cputype-icelake-client-deprecation.conf.cmd | 2 +-
src/test/cfg2cmd/seabios_serial.conf.cmd | 2 +-
src/test/cfg2cmd/simple-btrfs.conf.cmd | 2 +-
src/test/cfg2cmd/simple-cifs.conf.cmd | 2 +-
src/test/cfg2cmd/simple-rbd.conf.cmd | 2 +-
src/test/cfg2cmd/simple-virtio-blk.conf.cmd | 2 +-
.../cfg2cmd/simple-zfs-over-iscsi.conf.cmd | 2 +-
src/test/cfg2cmd/simple1-template.conf.cmd | 2 +-
src/test/cfg2cmd/simple1.conf.cmd | 2 +-
13 files changed, 27 insertions(+), 15 deletions(-)
diff --git a/src/PVE/QemuServer.pm b/src/PVE/QemuServer.pm
index 4edd1793..38272420 100644
--- a/src/PVE/QemuServer.pm
+++ b/src/PVE/QemuServer.pm
@@ -1376,7 +1376,12 @@ sub print_drivedevice_full {
my $drive_id = PVE::QemuServer::Drive::get_drive_id($drive);
if ($drive->{interface} eq 'virtio') {
my $pciaddr = print_pci_addr("$drive_id", $bridges, $arch);
- $device = "virtio-blk-pci,drive=drive-$drive_id,id=${drive_id}${pciaddr}";
+ $device = 'virtio-blk-pci';
+ # for the switch to -blockdev, there is no blockdev for 'none'
+ if (!min_version($machine_version, 10, 0) || $drive->{file} ne 'none') {
+ $device .= ",drive=drive-$drive_id";
+ }
+ $device .= ",id=${drive_id}${pciaddr}";
$device .= ",iothread=iothread-$drive_id" if $drive->{iothread};
} elsif ($drive->{interface} eq 'scsi') {
@@ -1392,7 +1397,11 @@ sub print_drivedevice_full {
$device = "scsi-$device_type,bus=$controller_prefix$controller.0,channel=0,scsi-id=0"
. ",lun=$drive->{index}";
}
- $device .= ",drive=drive-$drive_id,id=$drive_id";
+ # for the switch to -blockdev, there is no blockdev for 'none'
+ if (!min_version($machine_version, 10, 0) || $drive->{file} ne 'none') {
+ $device .= ",drive=drive-$drive_id";
+ }
+ $device .= ",id=$drive_id";
if ($drive->{ssd} && ($device_type eq 'block' || $device_type eq 'hd')) {
$device .= ",rotation_rate=1";
@@ -1432,7 +1441,10 @@ sub print_drivedevice_full {
} else {
$device .= ",bus=ahci$controller.$unit";
}
- $device .= ",drive=drive-$drive_id,id=$drive_id";
+ if (!min_version($machine_version, 10, 0) || $drive->{file} ne 'none') {
+ $device .= ",drive=drive-$drive_id";
+ }
+ $device .= ",id=$drive_id";
if ($device_type eq 'hd') {
if (my $model = $drive->{model}) {
diff --git a/src/test/cfg2cmd/bootorder-empty.conf.cmd b/src/test/cfg2cmd/bootorder-empty.conf.cmd
index e4bf4e6d..3f8fdb8e 100644
--- a/src/test/cfg2cmd/bootorder-empty.conf.cmd
+++ b/src/test/cfg2cmd/bootorder-empty.conf.cmd
@@ -28,7 +28,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2' \
-device 'lsi,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi4,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,scsi-id=4,drive=drive-scsi4,id=scsi4,write-cache=on' \
diff --git a/src/test/cfg2cmd/bootorder-legacy.conf.cmd b/src/test/cfg2cmd/bootorder-legacy.conf.cmd
index 7627780c..cd990cd8 100644
--- a/src/test/cfg2cmd/bootorder-legacy.conf.cmd
+++ b/src/test/cfg2cmd/bootorder-legacy.conf.cmd
@@ -28,7 +28,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'lsi,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi4,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,scsi-id=4,drive=drive-scsi4,id=scsi4,write-cache=on' \
diff --git a/src/test/cfg2cmd/bootorder.conf.cmd b/src/test/cfg2cmd/bootorder.conf.cmd
index 74af37e1..3cef2161 100644
--- a/src/test/cfg2cmd/bootorder.conf.cmd
+++ b/src/test/cfg2cmd/bootorder.conf.cmd
@@ -28,7 +28,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=103' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=103' \
-device 'lsi,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi4,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,scsi-id=4,drive=drive-scsi4,id=scsi4,bootindex=102,write-cache=on' \
diff --git a/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd b/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd
index effba2b7..e6e09278 100644
--- a/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd
+++ b/src/test/cfg2cmd/cputype-icelake-client-deprecation.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/base-8006-disk-0.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/seabios_serial.conf.cmd b/src/test/cfg2cmd/seabios_serial.conf.cmd
index f901a459..0eb02459 100644
--- a/src/test/cfg2cmd/seabios_serial.conf.cmd
+++ b/src/test/cfg2cmd/seabios_serial.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-btrfs.conf.cmd b/src/test/cfg2cmd/simple-btrfs.conf.cmd
index 9c3f97d2..2aa2083d 100644
--- a/src/test/cfg2cmd/simple-btrfs.conf.cmd
+++ b/src/test/cfg2cmd/simple-btrfs.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/butter/bread/images/8006/vm-8006-disk-0/disk.raw,if=none,id=drive-scsi0,discard=on,format=raw,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-cifs.conf.cmd b/src/test/cfg2cmd/simple-cifs.conf.cmd
index 61e8d01e..d23a046a 100644
--- a/src/test/cfg2cmd/simple-cifs.conf.cmd
+++ b/src/test/cfg2cmd/simple-cifs.conf.cmd
@@ -24,7 +24,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/mnt/pve/cifs-store/images/8006/vm-8006-disk-0.raw,if=none,id=drive-scsi0,discard=on,format=raw,cache=none,aio=native,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-rbd.conf.cmd b/src/test/cfg2cmd/simple-rbd.conf.cmd
index ea5934c4..df7cba3f 100644
--- a/src/test/cfg2cmd/simple-rbd.conf.cmd
+++ b/src/test/cfg2cmd/simple-rbd.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=rbd:cpool/vm-8006-disk-0:mon_host=127.0.0.42;127.0.0.21;[\:\:1]:auth_supported=none,if=none,id=drive-scsi0,discard=on,format=raw,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple-virtio-blk.conf.cmd b/src/test/cfg2cmd/simple-virtio-blk.conf.cmd
index 2182febc..0a7eb473 100644
--- a/src/test/cfg2cmd/simple-virtio-blk.conf.cmd
+++ b/src/test/cfg2cmd/simple-virtio-blk.conf.cmd
@@ -27,7 +27,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-virtio0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,iothread=iothread-virtio0,bootindex=100,write-cache=on' \
-netdev 'type=tap,id=net0,ifname=tap8006i0,script=/usr/libexec/qemu-server/pve-bridge,downscript=/usr/libexec/qemu-server/pve-bridgedown,vhost=on' \
diff --git a/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd b/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd
index d9a8e5e9..a90156b0 100644
--- a/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd
+++ b/src/test/cfg2cmd/simple-zfs-over-iscsi.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=iscsi://127.0.0.1/iqn.2019-10.org.test:foobar/0,if=none,id=drive-scsi0,discard=on,format=raw,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple1-template.conf.cmd b/src/test/cfg2cmd/simple1-template.conf.cmd
index 60531b77..c736c84a 100644
--- a/src/test/cfg2cmd/simple1-template.conf.cmd
+++ b/src/test/cfg2cmd/simple1-template.conf.cmd
@@ -24,7 +24,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/base-8006-disk-1.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap,readonly=on' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,write-cache=on' \
diff --git a/src/test/cfg2cmd/simple1.conf.cmd b/src/test/cfg2cmd/simple1.conf.cmd
index aa76ca62..e657aed7 100644
--- a/src/test/cfg2cmd/simple1.conf.cmd
+++ b/src/test/cfg2cmd/simple1.conf.cmd
@@ -26,7 +26,7 @@
-device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3,free-page-reporting=on' \
-iscsi 'initiator-name=iqn.1993-08.org.debian:01:aabbccddeeff' \
-drive 'if=none,id=drive-ide2,media=cdrom,aio=io_uring' \
- -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' \
+ -device 'ide-cd,bus=ide.1,unit=0,id=ide2,bootindex=200' \
-device 'virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5' \
-drive 'file=/var/lib/vz/images/8006/vm-8006-disk-0.qcow2,if=none,id=drive-scsi0,discard=on,format=qcow2,cache=none,aio=io_uring,detect-zeroes=unmap' \
-device 'scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100,write-cache=on' \
--
2.47.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2025-06-23 15:45 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-23 15:44 [pve-devel] [PATCH-SERIES qemu-server 00/15] preparation for blockdev, part two Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 01/15] fix #5985: qmp client: increase timeout for {device, netdev, object}_{add, del} commands Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 02/15] qmp client: add default timeouts for more blockdev commands Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 03/15] helpers: add missing includes Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 04/15] helpers: fix perlcritic warning about variables named $a and $b Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 05/15] move helper for iscsi initiator name to helpers module and improve name Fiona Ebner
2025-06-24 9:48 ` Fabian Grünbichler
2025-06-24 10:05 ` Fiona Ebner
2025-06-24 10:10 ` Fabian Grünbichler
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 06/15] introduce QemuImage module Fiona Ebner
2025-06-25 12:54 ` Daniel Kral
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 07/15] introduce OVMF module Fiona Ebner
2025-06-24 10:23 ` Fabian Grünbichler
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 08/15] blockdev: re-use cache setting from child node Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 09/15] blockdev: add workaround for issue #3229 Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 10/15] blockdev: add support for 'size' option Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 11/15] ovmf: add support for using blockdev Fiona Ebner
2025-06-24 8:38 ` Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [PATCH qemu-server 12/15] cfg2cmd: ovmf: support print_ovmf_commandline() returning machine flags Fiona Ebner
2025-06-23 15:44 ` Fiona Ebner [this message]
2025-06-23 15:44 ` [pve-devel] [RFC qemu-server 14/15] blockdev: add support for NBD paths Fiona Ebner
2025-06-23 15:44 ` [pve-devel] [RFC qemu-server 15/15] command line: switch to blockdev starting with machine version 10.0 Fiona Ebner
2025-06-24 13:53 ` DERUMIER, Alexandre via pve-devel
2025-06-24 14:34 ` Fiona Ebner
2025-06-24 14:41 ` DERUMIER, Alexandre via pve-devel
2025-06-25 11:31 ` DERUMIER, Alexandre via pve-devel
[not found] ` <f3d01b2976480800cfa294cf888534aebadec067.camel@groupe-cyllene.com>
2025-06-25 15:42 ` Fiona Ebner
2025-06-24 9:40 ` [pve-devel] [PATCH-SERIES qemu-server 00/15] preparation for blockdev, part two DERUMIER, Alexandre via pve-devel
2025-06-24 9:59 ` Fiona Ebner
2025-06-24 11:25 ` DERUMIER, Alexandre via pve-devel
2025-06-24 11:44 ` [pve-devel] partially-applied: " Fabian Grünbichler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250623154433.449277-14-f.ebner@proxmox.com \
--to=f.ebner@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal