Re: [pve-devel] [PATCH v2 manager 2/4] pvestatd: collect and broadcast pool usage

[Daniel Kral <d.kral@proxmox.com>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 5668 bytes --]

This could only be partially applied because of changes to
`update_{qemu,lxc}_status` in the mean time:

Patch failed at 0002 pvestatd: collect and broadcast pool usage
patching file PVE/Service/pvestatd.pm
Hunk #1 FAILED at 231.
Hunk #2 succeeded at 245 (offset 3 lines).
Hunk #3 succeeded at 283 with fuzz 1 (offset 5 lines).
Hunk #4 FAILED at 466.
Hunk #5 succeeded at 480 (offset 5 lines).
Hunk #6 succeeded at 592 with fuzz 1 (offset 11 lines).
Hunk #7 FAILED at 593.

Inlined the changes to resolve conflicts when applying onto ead665d5
("ui: ceph pool: add columns for application").

On 16/04/2024 14:20, Fabian Grünbichler wrote:
> so that other nodes can query it and both block changes that would violate the
> limits, and mark pools which are violating it currently accordingly.
> 
> Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
> ---
>  PVE/Service/pvestatd.pm | 59 ++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 55 insertions(+), 4 deletions(-)
> 
> diff --git a/PVE/Service/pvestatd.pm b/PVE/Service/pvestatd.pm
> index 2515120c6..d7e4755e9 100755
> --- a/PVE/Service/pvestatd.pm
> +++ b/PVE/Service/pvestatd.pm
> @@ -231,7 +231,7 @@ sub auto_balloning {
>  }
>  
>  sub update_qemu_status {
> -    my ($status_cfg) = @_;
> +    my ($status_cfg, $pool_membership, $pool_usage) = @_;

This should be

```
-    my ($status_cfg, $pull_txn) = @_;
+    my ($status_cfg, $pull_txn, $pool_membership, $pool_usage) = @_;
```

as of ead665d5 ("ui: ceph pool: add columns for application").

>  
>      my $ctime = time();
>      my $vmstatus = PVE::QemuServer::vmstatus(undef, 1);
> @@ -242,6 +242,21 @@ sub update_qemu_status {
>      my $transactions = PVE::ExtMetric::transactions_start($status_cfg);
>      foreach my $vmid (keys %$vmstatus) {
>  	my $d = $vmstatus->{$vmid};
> +
> +	if (my $pool = $pool_membership->{$vmid}) {
> +	    $pool_usage->{$pool}->{$vmid} = {
> +		cpu => {
> +		    config => ($d->{confcpus} // 0),
> +		    run => ($d->{runcpus} // 0),
> +		},
> +		mem => {
> +		    config => ($d->{confmem} // 0),
> +		    run => ($d->{runmem} // 0),
> +		},
> +		running => $d->{pid} ? 1 : 0,
> +	    };
> +	}
> +
>  	my $data;
>  	my $status = $d->{qmpstatus} || $d->{status} || 'stopped';
>  	my $template = $d->{template} ? $d->{template} : "0";
> @@ -263,6 +278,17 @@ sub update_qemu_status {
>      PVE::ExtMetric::transactions_finish($transactions);
>  }
>  
> +sub update_pool_usage {
> +    my ($usage) = @_;
> +
> +    my $ctime = time();
> +
> +    # TODO? RRD and ExtMetric support here?
> +
> +    my $new = { data => $usage, timestamp => $ctime };
> +    PVE::Cluster::broadcast_node_kv('pool-usage', encode_json($new));
> +}
> +
>  sub remove_stale_lxc_consoles {
>  
>      my $vmstatus = PVE::LXC::vmstatus();
> @@ -440,7 +466,7 @@ sub rebalance_lxc_containers {
>  }
>  
>  sub update_lxc_status {
> -    my ($status_cfg) = @_;
> +    my ($status_cfg, $pool_membership, $pool_usage) = @_;

This should be

```
-    my ($status_cfg, $pull_txn) = @_;
+    my ($status_cfg, $pull_txn, $pool_membership, $pool_usage) = @_;
```

>  
>      my $ctime = time();
>      my $vmstatus = PVE::LXC::vmstatus();
> @@ -449,6 +475,21 @@ sub update_lxc_status {
>  
>      foreach my $vmid (keys %$vmstatus) {
>  	my $d = $vmstatus->{$vmid};
> +
> +	if (my $pool = $pool_membership->{$vmid}) {
> +	    $pool_usage->{$pool}->{$vmid} = {
> +		cpu => {
> +		    config => ($d->{confcpus} // 0),
> +		    run => ($d->{runcpus} // 0),
> +		},
> +		mem => {
> +		    config => ($d->{confmem} // 0),
> +		    run => ($d->{runmem} // 0),
> +		},
> +		running => $d->{status} eq 'running' ? 1 : 0,
> +	    };
> +	}
> +
>  	my $template = $d->{template} ? $d->{template} : "0";
>  	my $data;
>  	if ($d->{status} eq 'running') { # running
> @@ -540,6 +581,10 @@ sub update_status {
>      syslog('err', $err) if $err;
>  
>      my $status_cfg = PVE::Cluster::cfs_read_file('status.cfg');
> +    my $user_cfg = PVE::Cluster::cfs_read_file('user.cfg');
> +    my $pools = $user_cfg->{pools};
> +    my $pool_membership = $user_cfg->{vms};
> +    my $pool_usage = {};
>  
>      eval {
>  	update_node_status($status_cfg);
> @@ -548,17 +593,23 @@ sub update_status {
>      syslog('err', "node status update error: $err") if $err;
>  
>      eval {
> -	update_qemu_status($status_cfg);
> +	update_qemu_status($status_cfg, $pool_membership, $pool_usage);

This should be

```
-       update_qemu_status($status_cfg, $pull_txn);
+       update_qemu_status($status_cfg, $pull_txn, $pool_membership, $pool_usage);
```

>      };
>      $err = $@;
>      syslog('err', "qemu status update error: $err") if $err;
>  
>      eval {
> -	update_lxc_status($status_cfg);
> +	update_lxc_status($status_cfg, $pool_membership, $pool_usage);

```
-       update_lxc_status($status_cfg, $pull_txn);
+       update_lxc_status($status_cfg, $pull_txn, $pool_membership, $pool_usage);
```

>      };
>      $err = $@;
>      syslog('err', "lxc status update error: $err") if $err;
>  
> +    eval {
> +	update_pool_usage($pool_usage);
> +    };
> +    $err =$@;

nit: missing whitespace between `=` and `$@`.

> +    syslog('err', "pool usage status update error: $err") if $err;
> +
>      eval {
>  	rebalance_lxc_containers();
>      };
> -- 
> 2.39.2








[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel