From: Stefan Hanreich <s.hanreich@proxmox.com>
To: pve-devel@lists.proxmox.com
Cc: Wolfgang Bumiller <w.bumiller@proxmox.com>
Subject: [pve-devel] [PATCH pve-firewall v5 2/5] add support for loading sdn firewall configuration
Date: Mon, 18 Nov 2024 12:41:31 +0100 [thread overview]
Message-ID: <20241118114134.83882-3-s.hanreich@proxmox.com> (raw)
In-Reply-To: <20241118114134.83882-1-s.hanreich@proxmox.com>
This also includes support for parsing rules referencing IPSets in the
new SDN scope and generating those IPSets in the firewall. We always
load the new configuration, since loading the configuration always
includes validating the loaded rules. Validation fails without
including the SDN ipsets, leading to syslog error messages.
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
Reviewed-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Tested-By: Gabriel Goller <g.goller@proxmox.com>
Tested-By: Hannes Dürr <h.duerr@proxmox.com>
---
src/PVE/Firewall.pm | 64 ++++++++++++++++++++++++++++-----
src/PVE/Service/pve_firewall.pm | 4 +--
2 files changed, 58 insertions(+), 10 deletions(-)
diff --git a/src/PVE/Firewall.pm b/src/PVE/Firewall.pm
index a69d5dd..d5b711d 100644
--- a/src/PVE/Firewall.pm
+++ b/src/PVE/Firewall.pm
@@ -20,11 +20,13 @@ use PVE::INotify;
use PVE::JSONSchema qw(register_standard_option get_standard_option);
use PVE::Network;
use PVE::ProcFSTools;
+use PVE::RPCEnvironment;
use PVE::SafeSyslog;
use PVE::Tools qw($IPV4RE $IPV6RE);
use PVE::Tools qw(run_command lock_file dir_glob_foreach);
use PVE::Firewall::Helpers;
+use PVE::RS::Firewall::SDN;
my $pvefw_conf_dir = "/etc/pve/firewall";
my $clusterfw_conf_filename = "$pvefw_conf_dir/cluster.fw";
@@ -1689,10 +1691,15 @@ sub verify_rule {
if (my $value = $rule->{$name}) {
if ($value =~ m/^\+/) {
- if ($value =~ m@^\+(guest/|dc/)?(${ipset_name_pattern})$@) {
- &$add_error($name, "no such ipset '$2'")
- if !($cluster_conf->{ipset}->{$2} || ($fw_conf && $fw_conf->{ipset}->{$2}));
-
+ if ($value =~ m@^\+(guest/|dc/|sdn/)?(${ipset_name_pattern})$@) {
+ if (
+ !($cluster_conf->{ipset}->{$2})
+ && !($fw_conf && $fw_conf->{ipset}->{$2})
+ && !($cluster_conf->{sdn} && $cluster_conf->{sdn}->{ipset}->{$2})
+ && !($fw_conf->{sdn} && $fw_conf->{sdn}->{ipset}->{$2})
+ ) {
+ $add_error->($name, "no such ipset '$2'")
+ }
} else {
&$add_error($name, "invalid ipset name '$value'");
}
@@ -2108,13 +2115,18 @@ sub ipt_gen_src_or_dst_match {
my $match;
if ($adr =~ m/^\+/) {
- if ($adr =~ m@^\+(guest/|dc/)?(${ipset_name_pattern})$@) {
+ if ($adr =~ m@^\+(guest/|dc/|sdn/)?(${ipset_name_pattern})$@) {
my $scope = $1 // "";
my $name = $2;
my $ipset_chain;
- if ($scope ne 'dc/' && $fw_conf && $fw_conf->{ipset}->{$name}) {
+
+ my $is_scope = sub { return !$scope || $scope eq "$_[0]/" };
+
+ if ($is_scope->('guest') && $fw_conf && $fw_conf->{ipset}->{$name}) {
$ipset_chain = compute_ipset_chain_name($fw_conf->{vmid}, $name, $ipversion);
- } elsif ($scope ne 'guest/' && $cluster_conf && $cluster_conf->{ipset}->{$name}) {
+ } elsif ($is_scope->('dc') && $cluster_conf && $cluster_conf->{ipset}->{$name}) {
+ $ipset_chain = compute_ipset_chain_name(0, $name, $ipversion);
+ } elsif ($is_scope->('sdn') && $cluster_conf->{sdn} && $cluster_conf->{sdn}->{ipset}->{$name}) {
$ipset_chain = compute_ipset_chain_name(0, $name, $ipversion);
} else {
die "no such ipset '$name'\n";
@@ -3655,6 +3667,7 @@ sub load_clusterfw_conf {
group_comments => {},
ipset => {} ,
ipset_comments => {},
+ sdn => load_sdn_conf(),
};
my $cluster_conf = generic_fw_config_parser($filename, $empty_conf, $empty_conf, 'cluster');
@@ -3663,6 +3676,40 @@ sub load_clusterfw_conf {
return $cluster_conf;
}
+sub load_sdn_conf {
+ my $rpcenv = eval { PVE::RPCEnvironment::get() };
+
+ if ($@) {
+ warn "could not load SDN configuration because RPCEnvironment is not initialized.";
+ return {};
+ }
+
+ my $authuser = $rpcenv->get_user();
+
+ my $guests = PVE::Cluster::get_vmlist();
+ my $allowed_vms = [
+ grep { $rpcenv->check($authuser, "/vms/$_", [ 'VM.Audit' ], 1) } sort keys $guests->{ids}->%*
+ ];
+
+ my $vnets = PVE::Network::SDN::Vnets::config(1);
+ my $privs = [ 'SDN.Audit', 'SDN.Allocate' ];
+ my $allowed_vnets = [];
+ foreach my $vnet (sort keys %{$vnets->{ids}}) {
+ my $zone = $vnets->{ids}->{$vnet}->{zone};
+ next if !$rpcenv->check_any($authuser, "/sdn/zones/$zone/$vnet", $privs, 1);
+ push @$allowed_vnets, $vnet;
+ }
+
+ my $empty_sdn_config = { ipset => {} , ipset_comments => {} };
+
+ my $sdn_config = eval {
+ PVE::RS::Firewall::SDN::config($allowed_vnets, $allowed_vms)
+ };
+ warn $@ if $@;
+
+ return $sdn_config // $empty_sdn_config;
+}
+
sub save_clusterfw_conf {
my ($cluster_conf) = @_;
@@ -3768,7 +3815,7 @@ sub compile {
$vmfw_configs = read_vm_firewall_configs($cluster_conf, $vmdata, $testdir);
} else { # normal operation
- $cluster_conf = load_clusterfw_conf(undef) if !$cluster_conf;
+ $cluster_conf = load_clusterfw_conf() if !$cluster_conf;
$hostfw_conf = load_hostfw_conf($cluster_conf, undef) if !$hostfw_conf;
@@ -4043,6 +4090,7 @@ sub compile_ipsets {
}
generate_ipset_chains($ipset_ruleset, undef, $cluster_conf, undef, $cluster_conf->{ipset});
+ generate_ipset_chains($ipset_ruleset, undef, $cluster_conf, undef, $cluster_conf->{sdn}->{ipset});
return $ipset_ruleset;
}
diff --git a/src/PVE/Service/pve_firewall.pm b/src/PVE/Service/pve_firewall.pm
index 65cb2b8..02b507a 100755
--- a/src/PVE/Service/pve_firewall.pm
+++ b/src/PVE/Service/pve_firewall.pm
@@ -158,7 +158,7 @@ __PACKAGE__->register_method ({
PVE::Firewall::set_verbose(1); # show syntax errors
- my $cluster_conf = PVE::Firewall::load_clusterfw_conf(undef);
+ my $cluster_conf = PVE::Firewall::load_clusterfw_conf();
$res->{enable} = $cluster_conf->{options}->{enable} ? 1 : 0;
if ($status eq 'running') {
@@ -202,7 +202,7 @@ __PACKAGE__->register_method ({
PVE::Firewall::set_verbose(1);
- my $cluster_conf = PVE::Firewall::load_clusterfw_conf(undef);
+ my $cluster_conf = PVE::Firewall::load_clusterfw_conf();
my ($ruleset, $ipset_ruleset, $rulesetv6, $ebtables_ruleset) = PVE::Firewall::compile($cluster_conf, undef, undef);
print "ipset cmdlist:\n";
--
2.39.5
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2024-11-18 11:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-18 11:41 [pve-devel] [PATCH docs/firewall/manager v5 0/5] autogenerate ipsets for sdn objects Stefan Hanreich
2024-11-18 11:41 ` [pve-devel] [PATCH pve-firewall v5 1/5] api: add protected flag to endpoints Stefan Hanreich
2024-11-18 16:10 ` Thomas Lamprecht
2024-11-18 11:41 ` Stefan Hanreich [this message]
2024-11-18 14:24 ` [pve-devel] [PATCH pve-firewall v5 2/5] add support for loading sdn firewall configuration Stefan Hanreich
2024-11-18 16:09 ` Thomas Lamprecht
2024-11-18 16:11 ` Stefan Hanreich
2024-11-18 16:13 ` Thomas Lamprecht
2024-11-18 11:41 ` [pve-devel] [PATCH pve-firewall v5 3/5] ipsets: return sdn ipsets from api Stefan Hanreich
2024-11-18 11:41 ` [pve-devel] [PATCH pve-manager v5 4/5] firewall: add sdn scope to IPRefSelector Stefan Hanreich
2024-11-18 11:41 ` [pve-devel] [PATCH pve-docs v5 5/5] sdn: add documentation for firewall integration Stefan Hanreich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241118114134.83882-3-s.hanreich@proxmox.com \
--to=s.hanreich@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
--cc=w.bumiller@proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox