[pve-devel] [PATCH cluster/guest-common/docs/qemu-server/manager v12 0/12] virtiofs

[pve-devel] [PATCH cluster/guest-common/docs/qemu-server/manager v12 0/12] virtiofs

[Markus Frank]

Virtio-fs is a shared file system that enables sharing a directory
between host and guest VMs. It takes advantage of the locality of
virtual machines and the hypervisor to get a higher throughput than
the 9p remote file system protocol.

build-order:
1. cluster
2. guest-common
3. docs
4. qemu-server
5. manager

I did not get virtiofsd to run with run_command without creating
zombie processes after stutdown. So I replaced run_command with exec
for now. Maybe someone can find out why this happens.

Changes in v12:
* rebase to master as most patches could not be applied anymore

Changes in v11:
* made submounts option on by default in WebUI and section config
* PVE::QemuServer::Virtiofs dependency removed in QemuServer/Memory.pm
* Minor changes to function/variable names
* Disable snapshots (with RAM) and hibernate due to incompatibility


cluster:

Markus Frank (1):
  add mapping/dir.cfg for resource mapping

 src/PVE/Cluster.pm  | 1 +
 src/pmxcfs/status.c | 1 +
 2 files changed, 2 insertions(+)


guest-common:

Markus Frank (1):
  add dir mapping section config

 src/Makefile           |   1 +
 src/PVE/Mapping/Dir.pm | 204 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 205 insertions(+)
 create mode 100644 src/PVE/Mapping/Dir.pm


docs:

Markus Frank (1):
  add doc section for the shared filesystem virtio-fs

 qm.adoc | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 95 insertions(+), 2 deletions(-)


qemu-server:

Markus Frank (4):
  control: add virtiofsd as runtime dependency for qemu-server
  fix #1027: virtio-fs support
  migration: check for virtiofs devices
  disable snapshot (with RAM) and hibernate with virtio-fs devices

 PVE/API2/Qemu.pm             |  46 ++++++-
 PVE/QemuServer.pm            |  36 +++++-
 PVE/QemuServer/Makefile      |   3 +-
 PVE/QemuServer/Memory.pm     |  23 ++--
 PVE/QemuServer/Virtiofs.pm   | 227 +++++++++++++++++++++++++++++++++++
 debian/control               |   1 +
 test/MigrationTest/Shared.pm |   7 ++
 7 files changed, 331 insertions(+), 12 deletions(-)
 create mode 100644 PVE/QemuServer/Virtiofs.pm


manager:

Markus Frank (5):
  api: add resource map api endpoints for directories
  ui: add edit window for dir mappings
  ui: add resource mapping view for directories
  ui: form: add selector for directory mappings
  ui: add option to add virtio-fs to qemu config

 PVE/API2/Cluster/Mapping.pm         |   7 +
 PVE/API2/Cluster/Mapping/Dir.pm     | 317 ++++++++++++++++++++++++++++
 PVE/API2/Cluster/Mapping/Makefile   |   1 +
 www/manager6/Makefile               |   4 +
 www/manager6/Utils.js               |   1 +
 www/manager6/dc/Config.js           |  10 +
 www/manager6/dc/DirMapView.js       |  50 +++++
 www/manager6/form/DirMapSelector.js |  63 ++++++
 www/manager6/qemu/HardwareView.js   |  19 ++
 www/manager6/qemu/VirtiofsEdit.js   | 137 ++++++++++++
 www/manager6/window/DirMapEdit.js   | 230 ++++++++++++++++++++
 11 files changed, 839 insertions(+)
 create mode 100644 PVE/API2/Cluster/Mapping/Dir.pm
 create mode 100644 www/manager6/dc/DirMapView.js
 create mode 100644 www/manager6/form/DirMapSelector.js
 create mode 100644 www/manager6/qemu/VirtiofsEdit.js
 create mode 100644 www/manager6/window/DirMapEdit.js

-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH cluster v12 1/12] add mapping/dir.cfg for resource mapping

[Markus Frank]

Add it to both the perl side (PVE/Cluster.pm) and pmxcfs side
(status.c).
This dir.cfg is used to map directory IDs to paths on selected hosts.

Signed-off-by: Markus Frank <m.frank@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
---
 src/PVE/Cluster.pm  | 1 +
 src/pmxcfs/status.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/src/PVE/Cluster.pm b/src/PVE/Cluster.pm
index f899dbe..6b775f8 100644
--- a/src/PVE/Cluster.pm
+++ b/src/PVE/Cluster.pm
@@ -82,6 +82,7 @@ my $observed = {
     'sdn/.running-config' => 1,
     'virtual-guest/cpu-models.conf' => 1,
     'virtual-guest/profiles.cfg' => 1,
+    'mapping/dir.cfg' => 1,
     'mapping/pci.cfg' => 1,
     'mapping/usb.cfg' => 1,
 };
diff --git a/src/pmxcfs/status.c b/src/pmxcfs/status.c
index dc44464..17cbf61 100644
--- a/src/pmxcfs/status.c
+++ b/src/pmxcfs/status.c
@@ -112,6 +112,7 @@ static memdb_change_t memdb_change_array[] = {
 	{ .path = "virtual-guest/cpu-models.conf" },
 	{ .path = "virtual-guest/profiles.cfg" },
 	{ .path = "firewall/cluster.fw" },
+	{ .path = "mapping/dir.cfg" },
 	{ .path = "mapping/pci.cfg" },
 	{ .path = "mapping/usb.cfg" },
 };
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH guest-common v12 2/12] add dir mapping section config

[Markus Frank]

Adds a config file for directories by using a 'map' property string for
each node mapping.

Next to node & path, there is the optional submounts parameter in the
map property string that is used to announce other mounted file systems
in the specified directory.

Additionally there are the default settings for xattr & acl.

example config:
```
some-dir-id
	map node=node1,path=/mnt/share/,submounts=1
	map node=node2,path=/mnt/share/,
	xattr 1
	acl 1
```

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 src/Makefile           |   1 +
 src/PVE/Mapping/Dir.pm | 204 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 205 insertions(+)
 create mode 100644 src/PVE/Mapping/Dir.pm

diff --git a/src/Makefile b/src/Makefile
index cbc40c1..030e7f7 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -15,6 +15,7 @@ install: PVE
 	install -m 0644 PVE/StorageTunnel.pm ${PERL5DIR}/PVE/
 	install -m 0644 PVE/Tunnel.pm ${PERL5DIR}/PVE/
 	install -d ${PERL5DIR}/PVE/Mapping
+	install -m 0644 PVE/Mapping/Dir.pm ${PERL5DIR}/PVE/Mapping/
 	install -m 0644 PVE/Mapping/PCI.pm ${PERL5DIR}/PVE/Mapping/
 	install -m 0644 PVE/Mapping/USB.pm ${PERL5DIR}/PVE/Mapping/
 	install -d ${PERL5DIR}/PVE/VZDump
diff --git a/src/PVE/Mapping/Dir.pm b/src/PVE/Mapping/Dir.pm
new file mode 100644
index 0000000..6a343b1
--- /dev/null
+++ b/src/PVE/Mapping/Dir.pm
@@ -0,0 +1,204 @@
+package PVE::Mapping::Dir;
+
+use strict;
+use warnings;
+
+use PVE::Cluster qw(cfs_register_file cfs_read_file cfs_lock_file cfs_write_file);
+use PVE::INotify;
+use PVE::JSONSchema qw(get_standard_option parse_property_string);
+use PVE::SectionConfig;
+
+use base qw(PVE::SectionConfig);
+
+my $FILENAME = 'mapping/dir.cfg';
+
+cfs_register_file($FILENAME,
+    sub { __PACKAGE__->parse_config(@_); },
+    sub { __PACKAGE__->write_config(@_); });
+
+
+# so we don't have to repeat the type every time
+sub parse_section_header {
+    my ($class, $line) = @_;
+
+    if ($line =~ m/^(\S+)\s*$/) {
+	my $id = $1;
+	my $errmsg = undef; # set if you want to skip whole section
+	eval { PVE::JSONSchema::pve_verify_configid($id) };
+	$errmsg = $@ if $@;
+	my $config = {}; # to return additional attributes
+	return ('dir', $id, $errmsg, $config);
+    }
+    return undef;
+}
+
+sub format_section_header {
+    my ($class, $type, $sectionId, $scfg, $done_hash) = @_;
+
+    return "$sectionId\n";
+}
+
+sub type {
+    return 'dir';
+}
+
+my $map_fmt = {
+    node => get_standard_option('pve-node'),
+    path => {
+	description => "Absolute directory path that should be shared with the guest.",
+	type => 'string',
+	format => 'pve-storage-path',
+    },
+    submounts => {
+	type => 'boolean',
+	description => "Announce that the directory contains other mounted"
+	    ." file systems. If this is not set and multiple file systems are"
+	    ." mounted, the guest may encounter duplicates due to file system"
+	    ." specific inode IDs.",
+	optional => 1,
+	default => 1,
+    },
+    description => {
+	description => "Description of the node specific directory.",
+	type => 'string',
+	optional => 1,
+	maxLength => 4096,
+    },
+};
+
+my $defaultData = {
+    propertyList => {
+	id => {
+	    type => 'string',
+	    description => "The ID of the directory",
+	    format => 'pve-configid',
+	},
+	description => {
+	    description => "Description of the directory",
+	    type => 'string',
+	    optional => 1,
+	    maxLength => 4096,
+	},
+	map => {
+	    type => 'array',
+	    description => 'A list of maps for the cluster nodes.',
+	    optional => 1,
+	    items => {
+		type => 'string',
+		format => $map_fmt,
+	    },
+	},
+	xattr => {
+	    type => 'boolean',
+	    description => "Enable support for extended attributes."
+		." If not supported by Guest OS or file system, this option is"
+		." simply ignored.",
+	    optional => 1,
+	    default => 0,
+	},
+	acl => {
+	    type => 'boolean',
+	    description => "Enable support for POSIX ACLs (implies --xattr)."
+		." The guest OS has to support ACLs. When used in a directory"
+		." with a file system without ACL support, the ACLs are ignored.",
+	    optional => 1,
+	    default => 0,
+	},
+    },
+};
+
+sub private {
+    return $defaultData;
+}
+
+sub map_fmt {
+    return $map_fmt;
+}
+
+sub options {
+    return {
+	description => { optional => 1 },
+	map => {},
+	xattr => { optional => 1 },
+	acl => { optional => 1 },
+    };
+}
+
+sub assert_valid {
+    my ($dir_cfg) = @_;
+
+    my $path = $dir_cfg->{path};
+
+    if (! -e $path) {
+	die "Path $path does not exist\n";
+    } elsif (! -d $path) {
+	die "Path $path exists, but is not a directory\n";
+    }
+
+    return 1;
+};
+
+sub assert_no_duplicate_node {
+    my ($map_list) = @_;
+
+    my %count;
+    for my $map (@$map_list) {
+	my $entry = parse_property_string($map_fmt, $map);
+	$count{$entry->{node}}++;
+    }
+    for my $node (keys %count) {
+	if ($count{$node} > 1) {
+	    die "Node '$node' is specified $count{$node} times.\n";
+	}
+    }
+}
+
+sub config {
+    return cfs_read_file($FILENAME);
+}
+
+sub lock_dir_config {
+    my ($code, $errmsg) = @_;
+
+    cfs_lock_file($FILENAME, undef, $code);
+    if (my $err = $@) {
+	$errmsg ? die "$errmsg: $err" : die $err;
+    }
+}
+
+sub write_dir_config {
+    my ($cfg) = @_;
+
+    cfs_write_file($FILENAME, $cfg);
+}
+
+sub find_on_current_node {
+    my ($id) = @_;
+
+    my $cfg = config();
+    my $node = PVE::INotify::nodename();
+
+    return get_node_mapping($cfg, $id, $node);
+}
+
+sub get_node_mapping {
+    my ($cfg, $id, $nodename) = @_;
+
+    return undef if !defined($cfg->{ids}->{$id});
+
+    my $res = [];
+    my $mapping_list = $cfg->{ids}->{$id}->{map};
+    for my $map (@{$mapping_list}) {
+	my $entry = eval { parse_property_string($map_fmt, $map) };
+	warn $@ if $@;
+	if ($entry && $entry->{node} eq $nodename) {
+	    push $res->@*, $entry;
+	}
+    }
+    return $res;
+}
+
+PVE::Mapping::Dir->register();
+PVE::Mapping::Dir->init();
+
+1;
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH docs v12 3/12] add doc section for the shared filesystem virtio-fs

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 qm.adoc | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 95 insertions(+), 2 deletions(-)

diff --git a/qm.adoc b/qm.adoc
index b550888..c958013 100644
--- a/qm.adoc
+++ b/qm.adoc
@@ -1081,6 +1081,98 @@ recommended to always use a limiter to avoid guests using too many host
 resources. If desired, a value of '0' for `max_bytes` can be used to disable
 all limits.
 
+[[qm_virtiofs]]
+Virtio-fs
+~~~~~~~~~
+
+Virtio-fs is a shared file system designed for virtual environments. It allows
+to share a directory tree available on the host by mounting it within VMs. It
+does not use the network stack and aims to offer similar performance and
+semantics as the source file system.
+
+To use virtio-fs, the https://gitlab.com/virtio-fs/virtiofsd[virtiofsd] daemon
+needs to run in the background. This happens automatically in {pve} when
+starting a related VM.
+
+Linux VMs with kernel >=5.4 support virtio-fs by default.
+
+There is a guide available on how to utilize virtio-fs in Windows VMs.
+https://github.com/virtio-win/kvm-guest-drivers-windows/wiki/Virtiofs:-Shared-file-system
+
+Known Limitations
+^^^^^^^^^^^^^^^^^
+
+* If Virtiofsd should crash, its mount point will hang in the VM until the VM
+is completely stopped.
+* Virtiofsd not responding may result in NFS-like hanging access in the VM.
+* Memory hotplug does not work in combination with virtio-fs (also results in
+hanging access).
+* Memory related features such as live migration, snapshots, and hibernate are
+not available with virtio-fs devices.
+* Windows cannot understand ACLs. Therefore, disable it for Windows VMs,
+otherwise the virtio-fs device will not be visible within the VMs.
+
+Add Mapping for Shared Directories
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To add a mapping for a shared directory, you can use the API directly with
+`pvesh` as described in the xref:resource_mapping[Resource Mapping] section:
+
+----
+pvesh create /cluster/mapping/dir --id dir1 \
+    --map node=node1,path=/path/to/share1 \
+    --map node=node2,path=/path/to/share2,submounts=1 \
+    --xattr 1 \
+    --acl 1
+----
+
+The `acl` parameter automatically implies `xattr`, that is, it makes no
+difference whether you set `xattr` to `0` if `acl` is set to `1`.
+
+Set `submounts` to `1` when multiple file systems are mounted in a shared
+directory to prevent the guest from creating duplicates because of file system
+specific inode IDs that get passed through.
+
+
+Add virtio-fs to a VM
+^^^^^^^^^^^^^^^^^^^^^
+
+To share a directory using virtio-fs, add the parameter `virtiofs<N>` (N can be
+anything between 0 and 9) to the VM config and use a directory ID (dirid) that
+has been configured in the resource mapping. Additionally, you can set the
+`cache` option to either `always`, `never`, or `auto` (default: `auto`),
+depending on your requirements. How the different caching modes behave can be
+read at https://lwn.net/Articles/774495/ under the "Caching Modes" section. To
+enable writeback cache set `writeback` to `1`.
+
+If you want virtio-fs to honor the `O_DIRECT` flag, you can set the `direct-io`
+parameter to `1` (default: `0`). This will degrade performance, but is useful if
+applications do their own caching.
+
+Additionally, it is possible to overwrite the default mapping settings for
+`xattr` and `acl` by setting them to either `1` or `0`. The `acl` parameter
+automatically implies `xattr`, that is, it makes no difference whether you set
+`xattr` to `0` if `acl` is set to `1`.
+
+----
+qm set <vmid> -virtiofs0 dirid=<dirid>,cache=always,direct-io=1
+qm set <vmid> -virtiofs1 <dirid>,cache=never,xattr=1
+qm set <vmid> -virtiofs2 <dirid>,acl=1,writeback=1
+----
+
+To mount virtio-fs in a guest VM with the Linux kernel virtio-fs driver, run the
+following command inside the guest:
+
+----
+mount -t virtiofs <mount tag> <mount point>
+----
+
+The dirid associated with the path on the current node is also used as the mount
+tag (name used to mount the device on the guest).
+
+For more information on available virtiofsd parameters, see the
+https://gitlab.com/virtio-fs/virtiofsd[GitLab virtiofsd project page].
+
 [[qm_bootorder]]
 Device Boot Order
 ~~~~~~~~~~~~~~~~~
@@ -1743,8 +1835,9 @@ in the relevant tab in the `Resource Mappings` category, or on the cli with
 
 [thumbnail="screenshot/gui-datacenter-mapping-pci-edit.png"]
 
-Where `<type>` is the hardware type (currently either `pci` or `usb`) and
-`<options>` are the device mappings and other configuration parameters.
+Where `<type>` is the hardware type (currently either `pci`, `usb` or
+xref:qm_virtiofs[dir]) and `<options>` are the device mappings and other
+configuration parameters.
 
 Note that the options must include a map property with all identifying
 properties of that hardware, so that it's possible to verify the hardware did
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH qemu-server v12 4/12] control: add virtiofsd as runtime dependency for qemu-server

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 debian/control | 1 +
 1 file changed, 1 insertion(+)

diff --git a/debian/control b/debian/control
index aa5f4c6d..386b83da 100644
--- a/debian/control
+++ b/debian/control
@@ -57,6 +57,7 @@ Depends: dbus,
          socat,
          swtpm,
          swtpm-tools,
+         virtiofsd,
          ${misc:Depends},
          ${perl:Depends},
          ${shlibs:Depends},
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH qemu-server v12 5/12] fix #1027: virtio-fs support

[Markus Frank]

add support for sharing directories with a guest vm.

virtio-fs needs virtiofsd to be started.
In order to start virtiofsd as a process (despite being a daemon it is
does not run in the background), a double-fork is used.

virtiofsd should close itself together with QEMU.

There are the parameters dirid and the optional parameters direct-io,
cache and writeback. Additionally the xattr & acl parameter overwrite
the directory mapping settings for xattr & acl.

The dirid gets mapped to the path on the current node and is also used
as a mount tag (name used to mount the device on the guest).

example config:
```
virtiofs0: foo,direct-io=1,cache=always,acl=1
virtiofs1: dirid=bar,cache=never,xattr=1,writeback=1
```

For information on the optional parameters see the coherent doc patch
and the official gitlab README:
https://gitlab.com/virtio-fs/virtiofsd/-/blob/main/README.md

Also add a permission check for virtiofs directory access.

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 PVE/API2/Qemu.pm           |  40 ++++++-
 PVE/QemuServer.pm          |  22 +++-
 PVE/QemuServer/Makefile    |   3 +-
 PVE/QemuServer/Memory.pm   |  23 ++--
 PVE/QemuServer/Virtiofs.pm | 227 +++++++++++++++++++++++++++++++++++++
 5 files changed, 304 insertions(+), 11 deletions(-)
 create mode 100644 PVE/QemuServer/Virtiofs.pm

diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index 1c3cb271..a369a32b 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -37,6 +37,7 @@ use PVE::QemuServer::Memory qw(get_current_memory);
 use PVE::QemuServer::PCI;
 use PVE::QemuServer::QMPHelpers;
 use PVE::QemuServer::USB;
+use PVE::QemuServer::Virtiofs;
 use PVE::QemuMigrate;
 use PVE::RPCEnvironment;
 use PVE::AccessControl;
@@ -721,6 +722,32 @@ my sub check_vm_create_hostpci_perm {
     return 1;
 };
 
+my sub check_dir_perm {
+    my ($rpcenv, $authuser, $vmid, $pool, $opt, $value) = @_;
+
+    return 1 if $authuser eq 'root@pam';
+
+    $rpcenv->check_vm_perm($authuser, $vmid, $pool, ['VM.Config.Disk']);
+
+    my $virtiofs = PVE::JSONSchema::parse_property_string('pve-qm-virtiofs', $value);
+    $rpcenv->check_full($authuser, "/mapping/dir/$virtiofs->{dirid}", ['Mapping.Use']);
+
+    return 1;
+};
+
+my sub check_vm_create_dir_perm {
+    my ($rpcenv, $authuser, $vmid, $pool, $param) = @_;
+
+    return 1 if $authuser eq 'root@pam';
+
+    for my $opt (keys %{$param}) {
+	next if $opt !~ m/^virtiofs\d+$/;
+	check_dir_perm($rpcenv, $authuser, $vmid, $pool, $opt, $param->{$opt});
+    }
+
+    return 1;
+};
+
 my $check_vm_modify_config_perm = sub {
     my ($rpcenv, $authuser, $vmid, $pool, $key_list) = @_;
 
@@ -731,7 +758,7 @@ my $check_vm_modify_config_perm = sub {
 	# else, as there the permission can be value dependend
 	next if PVE::QemuServer::is_valid_drivename($opt);
 	next if $opt eq 'cdrom';
-	next if $opt =~ m/^(?:unused|serial|usb|hostpci)\d+$/;
+	next if $opt =~ m/^(?:unused|serial|usb|hostpci|virtiofs)\d+$/;
 	next if $opt eq 'tags';
 
 
@@ -1025,6 +1052,7 @@ __PACKAGE__->register_method({
 	    &$check_vm_create_serial_perm($rpcenv, $authuser, $vmid, $pool, $param);
 	    check_vm_create_usb_perm($rpcenv, $authuser, $vmid, $pool, $param);
 	    check_vm_create_hostpci_perm($rpcenv, $authuser, $vmid, $pool, $param);
+	    check_vm_create_dir_perm($rpcenv, $authuser, $vmid, $pool, $param);
 
 	    PVE::QemuServer::check_bridge_access($rpcenv, $authuser, $param);
 	    &$check_cpu_model_access($rpcenv, $authuser, $param);
@@ -1919,6 +1947,10 @@ my $update_vm_api  = sub {
 		    check_hostpci_perm($rpcenv, $authuser, $vmid, undef, $opt, $val);
 		    PVE::QemuConfig->add_to_pending_delete($conf, $opt, $force);
 		    PVE::QemuConfig->write_config($vmid, $conf);
+		} elsif ($opt =~ m/^virtiofs\d$/) {
+		    check_dir_perm($rpcenv, $authuser, $vmid, undef, $opt, $val);
+		    PVE::QemuConfig->add_to_pending_delete($conf, $opt, $force);
+		    PVE::QemuConfig->write_config($vmid, $conf);
 		} elsif ($opt eq 'tags') {
 		    assert_tag_permissions($vmid, $val, '', $rpcenv, $authuser);
 		    delete $conf->{$opt};
@@ -2008,6 +2040,12 @@ my $update_vm_api  = sub {
 		    }
 		    check_hostpci_perm($rpcenv, $authuser, $vmid, undef, $opt, $param->{$opt});
 		    $conf->{pending}->{$opt} = $param->{$opt};
+		} elsif ($opt =~ m/^virtiofs\d$/) {
+		    if (my $oldvalue = $conf->{$opt}) {
+			check_dir_perm($rpcenv, $authuser, $vmid, undef, $opt, $oldvalue);
+		    }
+		    check_dir_perm($rpcenv, $authuser, $vmid, undef, $opt, $param->{$opt});
+		    $conf->{pending}->{$opt} = $param->{$opt};
 		} elsif ($opt eq 'tags') {
 		    assert_tag_permissions($vmid, $conf->{$opt}, $param->{$opt}, $rpcenv, $authuser);
 		    $conf->{pending}->{$opt} = PVE::GuestHelpers::get_unique_tags($param->{$opt});
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index cb1e0b82..015d4676 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -35,6 +35,7 @@ use PVE::Exception qw(raise raise_param_exc);
 use PVE::Format qw(render_duration render_bytes);
 use PVE::GuestHelpers qw(safe_string_ne safe_num_ne safe_boolean_ne);
 use PVE::HA::Config;
+use PVE::Mapping::Dir;
 use PVE::Mapping::PCI;
 use PVE::Mapping::USB;
 use PVE::INotify;
@@ -62,6 +63,7 @@ use PVE::QemuServer::Monitor qw(mon_cmd);
 use PVE::QemuServer::PCI qw(print_pci_addr print_pcie_addr print_pcie_root_port parse_hostpci);
 use PVE::QemuServer::QMPHelpers qw(qemu_deviceadd qemu_devicedel qemu_objectadd qemu_objectdel);
 use PVE::QemuServer::USB;
+use PVE::QemuServer::Virtiofs qw(max_virtiofs start_all_virtiofsd);
 
 my $have_sdn;
 eval {
@@ -957,6 +959,10 @@ my $netdesc = {
 
 PVE::JSONSchema::register_standard_option("pve-qm-net", $netdesc);
 
+for (my $i = 0; $i < max_virtiofs(); $i++)  {
+    $confdesc->{"virtiofs$i"} = get_standard_option('pve-qm-virtiofs');
+}
+
 my $ipconfig_fmt = {
     ip => {
 	type => 'string',
@@ -3872,8 +3878,11 @@ sub config_to_command {
 	push @$cmd, get_cpu_options($conf, $arch, $kvm, $kvm_off, $machine_version, $winversion, $gpu_passthrough);
     }
 
+    my $virtiofs_enabled = PVE::QemuServer::Virtiofs::virtiofs_enabled($conf);
+
     PVE::QemuServer::Memory::config(
-	$conf, $vmid, $sockets, $cores, $hotplug_features->{memory}, $cmd);
+	$conf, $vmid, $sockets, $cores, $hotplug_features->{memory}, $cmd,
+	$machineFlags, $virtiofs_enabled);
 
     push @$cmd, '-S' if $conf->{freeze};
 
@@ -4160,6 +4169,8 @@ sub config_to_command {
 	}
     }
 
+    PVE::QemuServer::Virtiofs::config($conf, $vmid, $devices);
+
     push @$cmd, @$devices;
     push @$cmd, '-rtc', join(',', @$rtcFlags) if scalar(@$rtcFlags);
     push @$cmd, '-machine', join(',', @$machineFlags) if scalar(@$machineFlags);
@@ -5945,6 +5956,8 @@ sub vm_start_nolock {
 	PVE::Tools::run_fork sub {
 	    PVE::Systemd::enter_systemd_scope($vmid, "Proxmox VE VM $vmid", %systemd_properties);
 
+	    my $virtiofs_sockets = start_all_virtiofsd($conf, $vmid);
+
 	    my $tpmpid;
 	    if ((my $tpm = $conf->{tpmstate0}) && !PVE::QemuConfig->is_template($conf)) {
 		# start the TPM emulator so QEMU can connect on start
@@ -5957,8 +5970,10 @@ sub vm_start_nolock {
 		    warn "stopping swtpm instance (pid $tpmpid) due to QEMU startup error\n";
 		    kill 'TERM', $tpmpid;
 		}
+		PVE::QemuServer::Virtiofs::close_sockets(@$virtiofs_sockets);
 		die "QEMU exited with code $exitcode\n";
 	    }
+	    PVE::QemuServer::Virtiofs::close_sockets(@$virtiofs_sockets);
 	};
     };
 
@@ -6616,7 +6631,10 @@ sub check_mapping_access {
 	    } else {
 		die "either 'host' or 'mapping' must be set.\n";
 	    }
-       }
+	} elsif ($opt =~ m/^virtiofs\d$/) {
+	    my $virtiofs = PVE::JSONSchema::parse_property_string('pve-qm-virtiofs', $conf->{$opt});
+	    $rpcenv->check_full($user, "/mapping/dir/$virtiofs->{dirid}", ['Mapping.Use']);
+	}
    }
 };
 
diff --git a/PVE/QemuServer/Makefile b/PVE/QemuServer/Makefile
index ac26e56f..d1bf8bb8 100644
--- a/PVE/QemuServer/Makefile
+++ b/PVE/QemuServer/Makefile
@@ -11,7 +11,8 @@ SOURCES=PCI.pm		\
 	CPUConfig.pm	\
 	CGroup.pm	\
 	Drive.pm	\
-	QMPHelpers.pm
+	QMPHelpers.pm	\
+	Virtiofs.pm
 
 .PHONY: install
 install: ${SOURCES}
diff --git a/PVE/QemuServer/Memory.pm b/PVE/QemuServer/Memory.pm
index f365f2d1..490ba378 100644
--- a/PVE/QemuServer/Memory.pm
+++ b/PVE/QemuServer/Memory.pm
@@ -336,7 +336,7 @@ sub qemu_memdevices_list {
 }
 
 sub config {
-    my ($conf, $vmid, $sockets, $cores, $hotplug, $cmd) = @_;
+    my ($conf, $vmid, $sockets, $cores, $hotplug, $cmd, $machine_flags, $virtiofs_enabled) = @_;
 
     my $memory = get_current_memory($conf->{memory});
     my $static_memory = 0;
@@ -379,7 +379,8 @@ sub config {
 	    my $numa_memory = $numa->{memory};
 	    $numa_totalmemory += $numa_memory;
 
-	    my $mem_object = print_mem_object($conf, "ram-node$i", $numa_memory);
+	    my $memdev = $virtiofs_enabled ? "virtiofs-mem$i" : "ram-node$i";
+	    my $mem_object = print_mem_object($conf, $memdev, $numa_memory);
 
 	    # cpus
 	    my $cpulists = $numa->{cpus};
@@ -404,7 +405,7 @@ sub config {
 	    }
 
 	    push @$cmd, '-object', $mem_object;
-	    push @$cmd, '-numa', "node,nodeid=$i,cpus=$cpus,memdev=ram-node$i";
+	    push @$cmd, '-numa', "node,nodeid=$i,cpus=$cpus,memdev=$memdev";
 	}
 
 	die "total memory for NUMA nodes must be equal to vm static memory\n"
@@ -418,15 +419,21 @@ sub config {
 		die "host NUMA node$i doesn't exist\n"
 		    if !host_numanode_exists($i) && $conf->{hugepages};
 
-		my $mem_object = print_mem_object($conf, "ram-node$i", $numa_memory);
-		push @$cmd, '-object', $mem_object;
-
 		my $cpus = ($cores * $i);
 		$cpus .= "-" . ($cpus + $cores - 1) if $cores > 1;
 
-		push @$cmd, '-numa', "node,nodeid=$i,cpus=$cpus,memdev=ram-node$i";
+		my $memdev = $virtiofs_enabled ? "virtiofs-mem$i" : "ram-node$i";
+		my $mem_object = print_mem_object($conf, $memdev, $numa_memory);
+		push @$cmd, '-object', $mem_object;
+		push @$cmd, '-numa', "node,nodeid=$i,cpus=$cpus,memdev=$memdev";
 	    }
 	}
+    } elsif ($virtiofs_enabled) {
+	# kvm: '-machine memory-backend' and '-numa memdev' properties are
+	# mutually exclusive
+	push @$cmd, '-object', 'memory-backend-memfd,id=virtiofs-mem'
+	    .",size=$conf->{memory}M,share=on";
+	push @$machine_flags, 'memory-backend=virtiofs-mem';
     }
 
     if ($hotplug) {
@@ -453,6 +460,8 @@ sub print_mem_object {
 	my $path = hugepages_mount_path($hugepages_size);
 
 	return "memory-backend-file,id=$id,size=${size}M,mem-path=$path,share=on,prealloc=yes";
+    } elsif ($id =~ m/^virtiofs-mem/) {
+	return "memory-backend-memfd,id=$id,size=${size}M,share=on";
     } else {
 	return "memory-backend-ram,id=$id,size=${size}M";
     }
diff --git a/PVE/QemuServer/Virtiofs.pm b/PVE/QemuServer/Virtiofs.pm
new file mode 100644
index 00000000..bdd9fafd
--- /dev/null
+++ b/PVE/QemuServer/Virtiofs.pm
@@ -0,0 +1,227 @@
+package PVE::QemuServer::Virtiofs;
+
+use strict;
+use warnings;
+
+use Fcntl qw(F_GETFD F_SETFD FD_CLOEXEC);
+use IO::Socket::UNIX;
+use POSIX;
+use Socket qw(SOCK_STREAM);
+
+use PVE::JSONSchema qw(get_standard_option parse_property_string);
+use PVE::Mapping::Dir;
+use PVE::RESTEnvironment qw(log_warn);
+
+use base qw(Exporter);
+
+our @EXPORT_OK = qw(
+max_virtiofs
+start_all_virtiofsd
+);
+
+my $MAX_VIRTIOFS = 10;
+my $socket_path_root = "/run/qemu-server/virtiofsd";
+
+my $virtiofs_fmt = {
+    'dirid' => {
+	type => 'string',
+	default_key => 1,
+	description => "Mapping identifier of the directory mapping to be shared with the guest."
+	    ." Also used as a mount tag inside the VM.",
+	format_description => 'mapping-id',
+	format => 'pve-configid',
+    },
+    'cache' => {
+	type => 'string',
+	description => "The caching policy the file system should use (auto, always, never).",
+	enum => [qw(auto always never)],
+	default => "auto",
+	optional => 1,
+    },
+    'direct-io' => {
+	type => 'boolean',
+	description => "Honor the O_DIRECT flag passed down by guest applications.",
+	default => 0,
+	optional => 1,
+    },
+    writeback => {
+	type => 'boolean',
+	description => "Enable writeback cache. If enabled, writes may be cached in the guest until"
+	    ." the file is closed or an fsync is performed.",
+	default => 0,
+	optional => 1,
+    },
+    xattr => {
+	type => 'boolean',
+	description => "Overwrite the xattr option from mapping and explicitly enable/disable"
+	    ." support for extended attributes for the VM.",
+	default => "use value from mapping",
+	optional => 1,
+    },
+    acl => {
+	type => 'boolean',
+	description => "Overwrite the acl option from mapping and explicitly enable/disable support"
+	    ." for posix ACLs (enabled acl implies xattr) for the VM.",
+	default => "use value from mapping",
+	optional => 1,
+    },
+};
+PVE::JSONSchema::register_format('pve-qm-virtiofs', $virtiofs_fmt);
+
+my $virtiofsdesc = {
+    optional => 1,
+    type => 'string', format => $virtiofs_fmt,
+    description => "Configuration for sharing a directory between host and guest using Virtio-fs.",
+};
+PVE::JSONSchema::register_standard_option("pve-qm-virtiofs", $virtiofsdesc);
+
+sub max_virtiofs {
+    return $MAX_VIRTIOFS;
+}
+
+sub assert_virtiofs_config {
+    my ($conf, $virtiofs) = @_;
+
+    my $dir_cfg = PVE::Mapping::Dir::config()->{ids}->{$virtiofs->{dirid}};
+    my $node_list = PVE::Mapping::Dir::find_on_current_node($virtiofs->{dirid});
+
+    my $acl = $virtiofs->{acl} // $dir_cfg->{acl};
+    if ($acl && PVE::QemuServer::Helpers::windows_version($conf->{ostype})) {
+	log_warn(
+	    "Please disable ACLs for virtiofs on Windows VMs, otherwise"
+	    ." the virtiofs shared directory cannot be mounted."
+	);
+    }
+
+    if (!$node_list || scalar($node_list->@*) != 1) {
+	die "virtiofs needs exactly one mapping for this node\n";
+    }
+
+    eval { PVE::Mapping::Dir::assert_valid($node_list->[0]) };
+    die "directory mapping invalid: $@\n" if $@;
+}
+
+sub config {
+    my ($conf, $vmid, $devices) = @_;
+
+    for (my $i = 0; $i < max_virtiofs(); $i++) {
+	my $opt = "virtiofs$i";
+
+	next if !$conf->{$opt};
+	my $virtiofs = parse_property_string('pve-qm-virtiofs', $conf->{$opt});
+	next if !$virtiofs;
+
+	assert_virtiofs_config($conf, $virtiofs);
+
+	push @$devices, '-chardev', "socket,id=virtiofs$i,path=$socket_path_root/vm$vmid-fs$i";
+
+	# queue-size is set 1024 because of bug with Windows guests:
+	# https://bugzilla.redhat.com/show_bug.cgi?id=1873088
+	# 1024 is also always used in the virtiofs documentations:
+	# https://gitlab.com/virtio-fs/virtiofsd#examples
+	push @$devices, '-device', 'vhost-user-fs-pci,queue-size=1024'
+	    .",chardev=virtiofs$i,tag=$virtiofs->{dirid}";
+    }
+}
+
+sub virtiofs_enabled {
+    my ($conf) = @_;
+
+    my $virtiofs_enabled = 0;
+    for (my $i = 0; $i < max_virtiofs(); $i++) {
+	my $opt = "virtiofs$i";
+	next if !$conf->{$opt};
+	my $virtiofs = parse_property_string('pve-qm-virtiofs', $conf->{$opt});
+	if ($virtiofs) {
+	    $virtiofs_enabled = 1;
+	    last;
+	}
+    }
+    return $virtiofs_enabled;
+}
+
+sub start_all_virtiofsd {
+    my ($conf, $vmid) = @_;
+    my $virtiofs_sockets = [];
+    for (my $i = 0; $i < max_virtiofs(); $i++) {
+	my $opt = "virtiofs$i";
+
+	next if !$conf->{$opt};
+	my $virtiofs = parse_property_string('pve-qm-virtiofs', $conf->{$opt});
+	next if !$virtiofs;
+
+	my $virtiofs_socket = start_virtiofsd($vmid, $i, $virtiofs);
+	push @$virtiofs_sockets, $virtiofs_socket;
+    }
+    return $virtiofs_sockets;
+}
+
+sub start_virtiofsd {
+    my ($vmid, $fsid, $virtiofs) = @_;
+
+    mkdir $socket_path_root;
+    my $socket_path = "$socket_path_root/vm$vmid-fs$fsid";
+    unlink($socket_path);
+    my $socket = IO::Socket::UNIX->new(
+	Type => SOCK_STREAM,
+	Local => $socket_path,
+	Listen => 1,
+    ) or die "cannot create socket - $!\n";
+
+    my $flags = fcntl($socket, F_GETFD, 0)
+	or die "failed to get file descriptor flags: $!\n";
+    fcntl($socket, F_SETFD, $flags & ~FD_CLOEXEC)
+	or die "failed to remove FD_CLOEXEC from file descriptor\n";
+
+    my $dir_cfg = PVE::Mapping::Dir::config()->{ids}->{$virtiofs->{dirid}};
+    my $node_list = PVE::Mapping::Dir::find_on_current_node($virtiofs->{dirid});
+    my $node_cfg = $node_list->[0];
+
+    my $virtiofsd_bin = '/usr/libexec/virtiofsd';
+    my $fd = $socket->fileno();
+    my $path = $node_cfg->{path};
+
+    # Default to dir config xattr & acl settings
+    my $xattr = $virtiofs->{xattr} // $dir_cfg->{xattr};
+    my $acl = $virtiofs->{acl} // $dir_cfg->{acl};
+
+    my $could_not_fork_err = "could not fork to start virtiofsd\n";
+    my $pid = fork();
+    if ($pid == 0) {
+	setsid();
+	$0 = "task pve-vm$vmid-virtiofs$fsid";
+	my $pid2 = fork();
+	if ($pid2 == 0) {
+	    my $cmd = [$virtiofsd_bin, "--fd=$fd", "--shared-dir=$path"];
+	    push @$cmd, '--xattr' if $xattr;
+	    push @$cmd, '--posix-acl' if $acl;
+	    push @$cmd, '--announce-submounts' if ($node_cfg->{submounts});
+	    push @$cmd, '--allow-direct-io' if ($virtiofs->{'direct-io'});
+	    push @$cmd, '--cache='.$virtiofs->{cache} if ($virtiofs->{cache});
+	    push @$cmd, '--writeback' if ($virtiofs->{'writeback'});
+	    push @$cmd, '--syslog';
+	    exec(@$cmd);
+	} elsif (!defined($pid2)) {
+	    die $could_not_fork_err;
+	} else {
+	    POSIX::_exit(0);
+	}
+    } elsif (!defined($pid)) {
+	die $could_not_fork_err;
+    } else {
+	waitpid($pid, 0);
+    }
+
+    # return socket to keep it alive,
+    # so that QEMU will wait for virtiofsd to start
+    return $socket;
+}
+
+sub close_sockets {
+    my @sockets = @_;
+    for my $socket (@sockets) {
+	shutdown($socket, 2);
+	close($socket);
+    }
+}
+1;
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH qemu-server v12 6/12] migration: check for virtiofs devices

[Markus Frank]

Add checks for directory mapping to the check_local_resources function.

Since the VM needs to be powered off for migration, migration should
work with a directory on shared storage with all caching settings.

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 PVE/QemuServer.pm            | 10 +++++++++-
 test/MigrationTest/Shared.pm |  7 +++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index 015d4676..20d38fe0 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -2574,6 +2574,7 @@ sub check_local_resources {
     my $nodelist = PVE::Cluster::get_nodelist();
     my $pci_map = PVE::Mapping::PCI::config();
     my $usb_map = PVE::Mapping::USB::config();
+    my $dir_map = PVE::Mapping::Dir::config();
 
     my $missing_mappings_by_node = { map { $_ => [] } @$nodelist };
 
@@ -2585,6 +2586,8 @@ sub check_local_resources {
 		$entry = PVE::Mapping::PCI::get_node_mapping($pci_map, $id, $node);
 	    } elsif ($type eq 'usb') {
 		$entry = PVE::Mapping::USB::get_node_mapping($usb_map, $id, $node);
+	    } elsif ($type eq 'dir') {
+		$entry = PVE::Mapping::Dir::get_node_mapping($dir_map, $id, $node);
 	    }
 	    if (!scalar($entry->@*)) {
 		push @{$missing_mappings_by_node->{$node}}, $key;
@@ -2613,9 +2616,14 @@ sub check_local_resources {
 		push @$mapped_res, $k;
 	    }
 	}
+	if ($k =~ m/^virtiofs/) {
+	    my $entry = parse_property_string('pve-qm-virtiofs', $conf->{$k});
+	    $add_missing_mapping->('dir', $k, $entry->{dirid});
+	    push @$mapped_res, $k;
+	}
 	# sockets are safe: they will recreated be on the target side post-migrate
 	next if $k =~ m/^serial/ && ($conf->{$k} eq 'socket');
-	push @loc_res, $k if $k =~ m/^(usb|hostpci|serial|parallel)\d+$/;
+	push @loc_res, $k if $k =~ m/^(usb|hostpci|serial|parallel|virtiofs)\d+$/;
     }
 
     die "VM uses local resources\n" if scalar @loc_res && !$noerr;
diff --git a/test/MigrationTest/Shared.pm b/test/MigrationTest/Shared.pm
index aa7203d1..c5d07222 100644
--- a/test/MigrationTest/Shared.pm
+++ b/test/MigrationTest/Shared.pm
@@ -90,6 +90,13 @@ $mapping_pci_module->mock(
     },
 );
 
+our $mapping_dir_module = Test::MockModule->new("PVE::Mapping::Dir");
+$mapping_dir_module->mock(
+    config => sub {
+	return {};
+    },
+);
+
 our $ha_config_module = Test::MockModule->new("PVE::HA::Config");
 $ha_config_module->mock(
     vm_is_ha_managed => sub {
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH qemu-server v12 7/12] disable snapshot (with RAM) and hibernate with virtio-fs devices

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 PVE/API2/Qemu.pm  | 6 ++++++
 PVE/QemuServer.pm | 4 ++++
 2 files changed, 10 insertions(+)

diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index a369a32b..90ed8f81 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -5252,6 +5252,12 @@ __PACKAGE__->register_method({
 
 	my $snapname = extract_param($param, 'snapname');
 
+	# TODO: move to check_non_migratable_resources when applied (SEV patch series)
+	my $vmconf = PVE::QemuConfig->load_config($vmid);
+	my $vmstate = extract_param($param, 'vmstate');
+	die "Cannot snapshot with including state while virtiofs is in use.\n"
+	    if $vmstate && PVE::QemuServer::Virtiofs::virtiofs_enabled($vmconf);
+
 	die "unable to use snapshot name 'current' (reserved name)\n"
 	    if $snapname eq 'current';
 
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index 20d38fe0..e198df83 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -6453,6 +6453,10 @@ sub vm_suspend {
 
 	$conf = PVE::QemuConfig->load_config($vmid);
 
+	# TODO: move to check_non_migratable_resources when applied (SEV patch series)
+	die "Cannot hibernate while virtiofs is in use.\n"
+	    if $includestate && PVE::QemuServer::Virtiofs::virtiofs_enabled($conf);
+
 	my $is_backing_up = PVE::QemuConfig->has_lock($conf, 'backup');
 	PVE::QemuConfig->check_lock($conf)
 	    if !($skiplock || $is_backing_up);
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH manager v12 08/12] api: add resource map api endpoints for directories

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 PVE/API2/Cluster/Mapping.pm       |   7 +
 PVE/API2/Cluster/Mapping/Dir.pm   | 317 ++++++++++++++++++++++++++++++
 PVE/API2/Cluster/Mapping/Makefile |   1 +
 3 files changed, 325 insertions(+)
 create mode 100644 PVE/API2/Cluster/Mapping/Dir.pm

diff --git a/PVE/API2/Cluster/Mapping.pm b/PVE/API2/Cluster/Mapping.pm
index 40386579..9f0dcd2b 100644
--- a/PVE/API2/Cluster/Mapping.pm
+++ b/PVE/API2/Cluster/Mapping.pm
@@ -3,11 +3,17 @@ package PVE::API2::Cluster::Mapping;
 use strict;
 use warnings;
 
+use PVE::API2::Cluster::Mapping::Dir;
 use PVE::API2::Cluster::Mapping::PCI;
 use PVE::API2::Cluster::Mapping::USB;
 
 use base qw(PVE::RESTHandler);
 
+__PACKAGE__->register_method ({
+    subclass => "PVE::API2::Cluster::Mapping::Dir",
+    path => 'dir',
+});
+
 __PACKAGE__->register_method ({
     subclass => "PVE::API2::Cluster::Mapping::PCI",
     path => 'pci',
@@ -41,6 +47,7 @@ __PACKAGE__->register_method ({
 	my ($param) = @_;
 
 	my $result = [
+	    { name => 'dir' },
 	    { name => 'pci' },
 	    { name => 'usb' },
 	];
diff --git a/PVE/API2/Cluster/Mapping/Dir.pm b/PVE/API2/Cluster/Mapping/Dir.pm
new file mode 100644
index 00000000..93f3cd8c
--- /dev/null
+++ b/PVE/API2/Cluster/Mapping/Dir.pm
@@ -0,0 +1,317 @@
+package PVE::API2::Cluster::Mapping::Dir;
+
+use strict;
+use warnings;
+
+use Storable qw(dclone);
+
+use PVE::INotify;
+use PVE::JSONSchema qw(get_standard_option parse_property_string);
+use PVE::Mapping::Dir ();
+use PVE::RPCEnvironment;
+use PVE::Tools qw(extract_param);
+
+use base qw(PVE::RESTHandler);
+
+__PACKAGE__->register_method ({
+    name => 'index',
+    path => '',
+    method => 'GET',
+    # only proxy if we give the 'check-node' parameter
+    proxyto_callback => sub {
+	my ($rpcenv, $proxyto, $param) = @_;
+	return $param->{'check-node'} // 'localhost';
+    },
+    description => "List directory mapping",
+    permissions => {
+	description => "Only lists entries where you have 'Mapping.Modify', 'Mapping.Use' or".
+	    " 'Mapping.Audit' permissions on '/mapping/dir/<id>'.",
+	user => 'all',
+    },
+    parameters => {
+	additionalProperties => 0,
+	properties => {
+	    'check-node' => get_standard_option('pve-node', {
+		description => "If given, checks the configurations on the given node for ".
+		    "correctness, and adds relevant diagnostics for the directory to the response.",
+		optional => 1,
+	    }),
+	},
+    },
+    returns => {
+	type => 'array',
+	items => {
+	    type => "object",
+	    properties => {
+		id => {
+		    type => 'string',
+		    description => "The logical ID of the mapping."
+		},
+		map => {
+		    type => 'array',
+		    description => "The entries of the mapping.",
+		    items => {
+			type => 'string',
+			description => "A mapping for a node.",
+		    },
+		},
+		description => {
+		    type => 'string',
+		    description => "A description of the logical mapping.",
+		},
+		xattr => {
+		    type => 'boolean',
+		    description => "Enable support for extended attributes.",
+		    optional => 1,
+		},
+		acl => {
+		    type => 'boolean',
+		    description => "Enable support for posix ACLs (implies --xattr).",
+		    optional => 1,
+		},
+		checks => {
+		    type => "array",
+		    optional => 1,
+		    description => "A list of checks, only present if 'check-node' is set.",
+		    items => {
+			type => 'object',
+			properties => {
+			    severity => {
+				type => "string",
+				enum => ['warning', 'error'],
+				description => "The severity of the error",
+			    },
+			    message => {
+				type => "string",
+				description => "The message of the error",
+			    },
+			},
+		    }
+		},
+	    },
+	},
+	links => [ { rel => 'child', href => "{id}" } ],
+    },
+    code => sub {
+	my ($param) = @_;
+
+	my $rpcenv = PVE::RPCEnvironment::get();
+	my $authuser = $rpcenv->get_user();
+
+	my $check_node = $param->{'check-node'};
+	my $local_node = PVE::INotify::nodename();
+
+	die "wrong node to check - $check_node != $local_node\n"
+	    if defined($check_node) && $check_node ne 'localhost' && $check_node ne $local_node;
+
+	my $cfg = PVE::Mapping::Dir::config();
+
+	my $can_see_mapping_privs = ['Mapping.Modify', 'Mapping.Use', 'Mapping.Audit'];
+
+	my $res = [];
+	for my $id (keys $cfg->{ids}->%*) {
+	    next if !$rpcenv->check_any($authuser, "/mapping/dir/$id", $can_see_mapping_privs, 1);
+	    next if !$cfg->{ids}->{$id};
+
+	    my $entry = dclone($cfg->{ids}->{$id});
+	    $entry->{id} = $id;
+	    $entry->{digest} = $cfg->{digest};
+
+	    if (defined($check_node)) {
+		$entry->{checks} = [];
+		if (my $mappings = PVE::Mapping::Dir::get_node_mapping($cfg, $id, $check_node)) {
+		    if (!scalar($mappings->@*)) {
+			push $entry->{checks}->@*, {
+			    severity => 'warning',
+			    message => "No mapping for node $check_node.",
+			};
+		    }
+		    for my $mapping ($mappings->@*) {
+			eval { PVE::Mapping::Dir::assert_valid($mapping) };
+			if (my $err = $@) {
+			    push $entry->{checks}->@*, {
+				severity => 'error',
+				message => "Invalid configuration: $err",
+			    };
+			}
+		    }
+		}
+	    }
+
+	    push @$res, $entry;
+	}
+
+	return $res;
+    },
+});
+
+__PACKAGE__->register_method ({
+    name => 'get',
+    protected => 1,
+    path => '{id}',
+    method => 'GET',
+    description => "Get directory mapping.",
+    permissions => {
+	check =>['or',
+	    ['perm', '/mapping/dir/{id}', ['Mapping.Use']],
+	    ['perm', '/mapping/dir/{id}', ['Mapping.Modify']],
+	    ['perm', '/mapping/dir/{id}', ['Mapping.Audit']],
+	],
+    },
+    parameters => {
+	additionalProperties => 0,
+	properties => {
+	    id => {
+		type => 'string',
+		format => 'pve-configid',
+	    },
+	}
+    },
+    returns => { type => 'object' },
+    code => sub {
+	my ($param) = @_;
+
+	my $cfg = PVE::Mapping::Dir::config();
+	my $id = $param->{id};
+
+	my $entry = $cfg->{ids}->{$id};
+	die "mapping '$param->{id}' not found\n" if !defined($entry);
+
+	my $data = dclone($entry);
+
+	$data->{digest} = $cfg->{digest};
+
+	return $data;
+    }});
+
+__PACKAGE__->register_method ({
+    name => 'create',
+    protected => 1,
+    path => '',
+    method => 'POST',
+    description => "Create a new directory mapping.",
+    permissions => {
+	check => ['perm', '/mapping/dir', ['Mapping.Modify']],
+    },
+    parameters => PVE::Mapping::Dir->createSchema(1),
+    returns => {
+	type => 'null',
+    },
+    code => sub {
+	my ($param) = @_;
+
+	my $id = extract_param($param, 'id');
+
+	my $plugin = PVE::Mapping::Dir->lookup('dir');
+	my $opts = $plugin->check_config($id, $param, 1, 1);
+
+	my $map_list = $opts->{map};
+	PVE::Mapping::Dir::assert_no_duplicate_node($map_list);
+
+	PVE::Mapping::Dir::lock_dir_config(sub {
+	    my $cfg = PVE::Mapping::Dir::config();
+
+	    die "dir ID '$id' already defined\n" if defined($cfg->{ids}->{$id});
+
+	    $cfg->{ids}->{$id} = $opts;
+
+	    PVE::Mapping::Dir::write_dir_config($cfg);
+
+	}, "create directory mapping failed");
+
+	return;
+    },
+});
+
+__PACKAGE__->register_method ({
+    name => 'update',
+    protected => 1,
+    path => '{id}',
+    method => 'PUT',
+    description => "Update a directory mapping.",
+    permissions => {
+	check => ['perm', '/mapping/dir/{id}', ['Mapping.Modify']],
+    },
+    parameters => PVE::Mapping::Dir->updateSchema(),
+    returns => {
+	type => 'null',
+    },
+    code => sub {
+	my ($param) = @_;
+
+	my $digest = extract_param($param, 'digest');
+	my $delete = extract_param($param, 'delete');
+	my $id = extract_param($param, 'id');
+
+	if ($delete) {
+	    $delete = [ PVE::Tools::split_list($delete) ];
+	}
+
+	PVE::Mapping::Dir::lock_dir_config(sub {
+	    my $cfg = PVE::Mapping::Dir::config();
+
+	    PVE::Tools::assert_if_modified($cfg->{digest}, $digest) if defined($digest);
+
+	    die "dir ID '$id' does not exist\n" if !defined($cfg->{ids}->{$id});
+
+	    my $plugin = PVE::Mapping::Dir->lookup('dir');
+	    my $opts = $plugin->check_config($id, $param, 1, 1);
+
+	    my $map_list = $opts->{map};
+	    PVE::Mapping::Dir::assert_no_duplicate_node($map_list);
+
+	    my $data = $cfg->{ids}->{$id};
+
+	    my $options = $plugin->private()->{options}->{dir};
+	    PVE::SectionConfig::delete_from_config($data, $options, $opts, $delete);
+
+	    $data->{$_} = $opts->{$_} for keys $opts->%*;
+
+	    PVE::Mapping::Dir::write_dir_config($cfg);
+
+	}, "update directory mapping failed");
+
+	return;
+    },
+});
+
+__PACKAGE__->register_method ({
+    name => 'delete',
+    protected => 1,
+    path => '{id}',
+    method => 'DELETE',
+    description => "Remove directory mapping.",
+    permissions => {
+	check => [ 'perm', '/mapping/dir', ['Mapping.Modify']],
+    },
+    parameters => {
+	additionalProperties => 0,
+	properties => {
+	    id => {
+		type => 'string',
+		format => 'pve-configid',
+	    },
+	}
+    },
+    returns => { type => 'null' },
+    code => sub {
+	my ($param) = @_;
+
+	my $id = $param->{id};
+
+	PVE::Mapping::Dir::lock_dir_config(sub {
+	    my $cfg = PVE::Mapping::Dir::config();
+
+	    if ($cfg->{ids}->{$id}) {
+		delete $cfg->{ids}->{$id};
+	    }
+
+	    PVE::Mapping::Dir::write_dir_config($cfg);
+
+	}, "delete dir mapping failed");
+
+	return;
+    }
+});
+
+1;
diff --git a/PVE/API2/Cluster/Mapping/Makefile b/PVE/API2/Cluster/Mapping/Makefile
index e7345ab4..5dbb3f5c 100644
--- a/PVE/API2/Cluster/Mapping/Makefile
+++ b/PVE/API2/Cluster/Mapping/Makefile
@@ -3,6 +3,7 @@ include ../../../../defines.mk
 # for node independent, cluster-wide applicable, API endpoints
 # ensure we do not conflict with files shipped by pve-cluster!!
 PERLSOURCE= 	\
+	Dir.pm  \
 	PCI.pm	\
 	USB.pm
 
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH manager v12 09/12] ui: add edit window for dir mappings

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 www/manager6/Makefile             |   1 +
 www/manager6/window/DirMapEdit.js | 230 ++++++++++++++++++++++++++++++
 2 files changed, 231 insertions(+)
 create mode 100644 www/manager6/window/DirMapEdit.js

diff --git a/www/manager6/Makefile b/www/manager6/Makefile
index d623dfb9..74c6b0e1 100644
--- a/www/manager6/Makefile
+++ b/www/manager6/Makefile
@@ -138,6 +138,7 @@ JSSRC= 							\
 	window/TreeSettingsEdit.js			\
 	window/PCIMapEdit.js				\
 	window/USBMapEdit.js				\
+	window/DirMapEdit.js                            \
 	window/GuestImport.js				\
 	ha/Fencing.js					\
 	ha/GroupEdit.js					\
diff --git a/www/manager6/window/DirMapEdit.js b/www/manager6/window/DirMapEdit.js
new file mode 100644
index 00000000..126d7c57
--- /dev/null
+++ b/www/manager6/window/DirMapEdit.js
@@ -0,0 +1,230 @@
+Ext.define('PVE.window.DirMapEditWindow', {
+    extend: 'Proxmox.window.Edit',
+
+    mixins: ['Proxmox.Mixin.CBind'],
+
+    cbindData: function(initialConfig) {
+	let me = this;
+	me.isCreate = !me.name;
+	me.method = me.isCreate ? 'POST' : 'PUT';
+	me.hideMapping = !!me.entryOnly;
+	me.hideComment = me.name && !me.entryOnly;
+	me.hideNodeSelector = me.nodename || me.entryOnly;
+	me.hideNode = !me.nodename || !me.hideNodeSelector;
+	return {
+	    name: me.name,
+	    nodename: me.nodename,
+	};
+    },
+
+    submitUrl: function(_url, data) {
+	let me = this;
+	let name = me.isCreate ? '' : me.name;
+	return `/cluster/mapping/dir/${name}`;
+    },
+
+    title: gettext('Add Dir mapping'),
+
+    onlineHelp: 'resource_mapping',
+
+    method: 'POST',
+
+    controller: {
+	xclass: 'Ext.app.ViewController',
+
+	onGetValues: function(values) {
+	    let me = this;
+	    let view = me.getView();
+	    values.node ??= view.nodename;
+
+	    let name = values.name;
+	    let description = values.description;
+	    let xattr = values.xattr;
+	    let acl = values.acl;
+	    let deletes = values.delete;
+
+	    delete values.description;
+	    delete values.name;
+	    delete values.xattr;
+	    delete values.acl;
+	    delete values.delete;
+
+	    if (PVE.Parser.parseBoolean(values.submounts)) {
+		values.submounts = 1;
+	    }
+
+	    let map = [];
+	    if (me.originalMap) {
+		map = PVE.Parser.filterPropertyStringList(me.originalMap, (e) => e.node !== values.node);
+	    }
+	    if (values.path) {
+		map.push(PVE.Parser.printPropertyString(values));
+	    }
+	    values = { map };
+
+	    if (description) {
+		values.description = description;
+	    }
+	    if (xattr) {
+		values.xattr = xattr;
+	    }
+	    if (acl) {
+		values.acl = acl;
+	    }
+	    if (deletes && !view.isCreate) {
+		values.delete = deletes;
+	    }
+	    if (view.isCreate) {
+		values.id = name;
+	    }
+
+	    return values;
+	},
+
+	onSetValues: function(values) {
+	    let me = this;
+	    let view = me.getView();
+	    me.originalMap = [...values.map];
+	    let configuredNodes = [];
+	    PVE.Parser.filterPropertyStringList(values.map, (e) => {
+		configuredNodes.push(e.node);
+		e.submounts = PVE.Parser.parseBoolean(e.submounts) ? 1 : 0;
+		if (e.node === view.nodename) {
+		    values = e;
+		}
+		return false;
+	    });
+
+	    me.lookup('nodeselector').disallowedNodes = configuredNodes;
+
+	    return values;
+	},
+
+	init: function(view) {
+	    let me = this;
+
+	    if (!view.nodename) {
+		//throw "no nodename given";
+	    }
+	},
+    },
+
+    items: [
+	{
+	    xtype: 'inputpanel',
+	    onGetValues: function(values) {
+		return this.up('window').getController().onGetValues(values);
+	    },
+
+	    onSetValues: function(values) {
+		return this.up('window').getController().onSetValues(values);
+	    },
+
+	    columnT: [
+		{
+		    xtype: 'displayfield',
+		    reference: 'directory-hint',
+		    columnWidth: 1,
+		    value: 'Make sure the directory exists.',
+		    cbind: {
+			disabled: '{hideMapping}',
+			hidden: '{hideMapping}',
+		    },
+		    userCls: 'pmx-hint',
+		},
+	    ],
+
+	    column1: [
+		{
+		    xtype: 'pmxDisplayEditField',
+		    fieldLabel: gettext('Name'),
+		    cbind: {
+			editable: '{!name}',
+			value: '{name}',
+			submitValue: '{isCreate}',
+		    },
+		    name: 'name',
+		    allowBlank: false,
+		},
+		{
+		    xtype: 'pveNodeSelector',
+		    reference: 'nodeselector',
+		    fieldLabel: gettext('Node'),
+		    name: 'node',
+		    cbind: {
+			disabled: '{hideNodeSelector}',
+			hidden: '{hideNodeSelector}',
+		    },
+		    allowBlank: false,
+		},
+	    ],
+
+	    column2: [
+		{
+		    xtype: 'fieldcontainer',
+		    defaultType: 'radiofield',
+		    layout: 'fit',
+		    cbind: {
+			disabled: '{hideMapping}',
+			hidden: '{hideMapping}',
+		    },
+		    items: [
+			{
+			    xtype: 'textfield',
+			    name: 'path',
+			    reference: 'path',
+			    value: '',
+			    emptyText: gettext('/some/path'),
+			    cbind: {
+				nodename: '{nodename}',
+				disabled: '{hideMapping}',
+			    },
+			    allowBlank: false,
+			    fieldLabel: gettext('Path'),
+			},
+			{
+			    xtype: 'proxmoxcheckbox',
+			    name: 'submounts',
+			    fieldLabel: gettext('submounts'),
+			    value: '1',
+			    deleteEmpty: false,
+			},
+		    ],
+		},
+	    ],
+
+	    columnB: [
+		{
+		    xtype: 'fieldcontainer',
+		    defaultType: 'radiofield',
+		    layout: 'fit',
+		    cbind: {
+			disabled: '{hideComment}',
+			hidden: '{hideComment}',
+		    },
+		    items: [
+			{
+			    xtype: 'proxmoxtextfield',
+			    fieldLabel: gettext('Comment'),
+			    submitValue: true,
+			    name: 'description',
+			    deleteEmpty: true,
+			},
+			{
+			    xtype: 'proxmoxcheckbox',
+			    fieldLabel: gettext('Use dir with xattr by default'),
+			    name: 'xattr',
+			    deleteEmpty: true,
+			},
+			{
+			    xtype: 'proxmoxcheckbox',
+			    fieldLabel: gettext('Use dir with acl by default'),
+			    name: 'acl',
+			    deleteEmpty: true,
+			},
+		    ],
+		},
+	    ],
+	},
+    ],
+});
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH manager v12 10/12] ui: add resource mapping view for directories

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 www/manager6/Makefile         |  1 +
 www/manager6/dc/Config.js     | 10 +++++++
 www/manager6/dc/DirMapView.js | 50 +++++++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+)
 create mode 100644 www/manager6/dc/DirMapView.js

diff --git a/www/manager6/Makefile b/www/manager6/Makefile
index 74c6b0e1..281c206a 100644
--- a/www/manager6/Makefile
+++ b/www/manager6/Makefile
@@ -189,6 +189,7 @@ JSSRC= 							\
 	dc/RealmSyncJob.js				\
 	dc/PCIMapView.js				\
 	dc/USBMapView.js				\
+	dc/DirMapView.js				\
 	lxc/CmdMenu.js					\
 	lxc/Config.js					\
 	lxc/CreateWizard.js				\
diff --git a/www/manager6/dc/Config.js b/www/manager6/dc/Config.js
index ddbb58b1..3355c835 100644
--- a/www/manager6/dc/Config.js
+++ b/www/manager6/dc/Config.js
@@ -320,6 +320,16 @@ Ext.define('PVE.dc.Config', {
 			    title: gettext('USB Devices'),
 			    flex: 1,
 			},
+			{
+			    xtype: 'splitter',
+			    collapsible: false,
+			    performCollapse: false,
+			},
+			{
+			    xtype: 'pveDcDirMapView',
+			    title: gettext('Directories'),
+			    flex: 1,
+			},
 		    ],
 		},
 	    );
diff --git a/www/manager6/dc/DirMapView.js b/www/manager6/dc/DirMapView.js
new file mode 100644
index 00000000..4468e951
--- /dev/null
+++ b/www/manager6/dc/DirMapView.js
@@ -0,0 +1,50 @@
+Ext.define('pve-resource-dir-tree', {
+    extend: 'Ext.data.Model',
+    idProperty: 'internalId',
+    fields: ['type', 'text', 'path', 'id', 'description', 'digest'],
+});
+
+Ext.define('PVE.dc.DirMapView', {
+    extend: 'PVE.tree.ResourceMapTree',
+    alias: 'widget.pveDcDirMapView',
+
+    editWindowClass: 'PVE.window.DirMapEditWindow',
+    baseUrl: '/cluster/mapping/dir',
+    mapIconCls: 'fa fa-folder',
+    entryIdProperty: 'path',
+
+    store: {
+	sorters: 'text',
+	model: 'pve-resource-dir-tree',
+	data: {},
+    },
+
+    columns: [
+	{
+	    xtype: 'treecolumn',
+	    text: gettext('ID/Node'),
+	    dataIndex: 'text',
+	    width: 200,
+	},
+	{
+	    text: gettext('xattr'),
+	    dataIndex: 'xattr',
+	},
+	{
+	    text: gettext('acl'),
+	    dataIndex: 'acl',
+	},
+	{
+	    text: gettext('submounts'),
+	    dataIndex: 'submounts',
+	},
+	{
+	    header: gettext('Comment'),
+	    dataIndex: 'description',
+	    renderer: function(value, _meta, record) {
+		return value ?? record.data.comment;
+	    },
+	    flex: 1,
+	},
+    ],
+});
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH manager v12 11/12] ui: form: add selector for directory mappings

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 www/manager6/Makefile               |  1 +
 www/manager6/form/DirMapSelector.js | 63 +++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)
 create mode 100644 www/manager6/form/DirMapSelector.js

diff --git a/www/manager6/Makefile b/www/manager6/Makefile
index 281c206a..72f1381c 100644
--- a/www/manager6/Makefile
+++ b/www/manager6/Makefile
@@ -35,6 +35,7 @@ JSSRC= 							\
 	form/ContentTypeSelector.js			\
 	form/ControllerSelector.js			\
 	form/DayOfWeekSelector.js			\
+	form/DirMapSelector.js                          \
 	form/DiskFormatSelector.js			\
 	form/DiskStorageSelector.js			\
 	form/FileSelector.js				\
diff --git a/www/manager6/form/DirMapSelector.js b/www/manager6/form/DirMapSelector.js
new file mode 100644
index 00000000..473a2ffe
--- /dev/null
+++ b/www/manager6/form/DirMapSelector.js
@@ -0,0 +1,63 @@
+Ext.define('PVE.form.DirMapSelector', {
+    extend: 'Proxmox.form.ComboGrid',
+    alias: 'widget.pveDirMapSelector',
+
+    store: {
+	fields: ['name', 'path'],
+	filterOnLoad: true,
+	sorters: [
+	    {
+		property: 'id',
+		direction: 'ASC',
+	    },
+	],
+    },
+
+    allowBlank: false,
+    autoSelect: false,
+    displayField: 'id',
+    valueField: 'id',
+
+    listConfig: {
+	columns: [
+	    {
+		header: gettext('Directory ID'),
+		dataIndex: 'id',
+		flex: 1,
+	    },
+	    {
+		header: gettext('Comment'),
+		dataIndex: 'description',
+		flex: 1,
+	    },
+	],
+    },
+
+    setNodename: function(nodename) {
+	var me = this;
+
+	if (!nodename || me.nodename === nodename) {
+	    return;
+	}
+
+	me.nodename = nodename;
+
+	me.store.setProxy({
+	    type: 'proxmox',
+	    url: `/api2/json/cluster/mapping/dir?check-node=${nodename}`,
+	});
+
+	me.store.load();
+    },
+
+    initComponent: function() {
+	var me = this;
+
+	var nodename = me.nodename;
+	me.nodename = undefined;
+
+        me.callParent();
+
+	me.setNodename(nodename);
+    },
+});
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

[pve-devel] [PATCH manager v12 12/12] ui: add option to add virtio-fs to qemu config

[Markus Frank]

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
 www/manager6/Makefile             |   1 +
 www/manager6/Utils.js             |   1 +
 www/manager6/qemu/HardwareView.js |  19 +++++
 www/manager6/qemu/VirtiofsEdit.js | 137 ++++++++++++++++++++++++++++++
 4 files changed, 158 insertions(+)
 create mode 100644 www/manager6/qemu/VirtiofsEdit.js

diff --git a/www/manager6/Makefile b/www/manager6/Makefile
index 72f1381c..e31e5f64 100644
--- a/www/manager6/Makefile
+++ b/www/manager6/Makefile
@@ -270,6 +270,7 @@ JSSRC= 							\
 	qemu/Smbios1Edit.js				\
 	qemu/SystemEdit.js				\
 	qemu/USBEdit.js					\
+	qemu/VirtiofsEdit.js				\
 	sdn/Browser.js					\
 	sdn/ControllerView.js				\
 	sdn/Status.js					\
diff --git a/www/manager6/Utils.js b/www/manager6/Utils.js
index da8870a6..13925415 100644
--- a/www/manager6/Utils.js
+++ b/www/manager6/Utils.js
@@ -1638,6 +1638,7 @@ Ext.define('PVE.Utils', {
 	serial: 4,
 	rng: 1,
 	tpmstate: 1,
+	virtiofs: 10,
     },
 
     // we can have usb6 and up only for specific machine/ostypes
diff --git a/www/manager6/qemu/HardwareView.js b/www/manager6/qemu/HardwareView.js
index 59e670db..363aafe8 100644
--- a/www/manager6/qemu/HardwareView.js
+++ b/www/manager6/qemu/HardwareView.js
@@ -316,6 +316,16 @@ Ext.define('PVE.qemu.HardwareView', {
 	    never_delete: !caps.nodes['Sys.Console'],
 	    header: gettext("VirtIO RNG"),
 	};
+	for (let i = 0; i < PVE.Utils.hardware_counts.virtiofs; i++) {
+	    let confid = "virtiofs" + i.toString();
+	    rows[confid] = {
+		group: 50,
+		order: i,
+		iconCls: 'folder',
+		editor: 'PVE.qemu.VirtiofsEdit',
+		header: gettext('Virtiofs') + ' (' + confid +')',
+	    };
+	}
 
 	var sorterFn = function(rec1, rec2) {
 	    var v1 = rec1.data.key;
@@ -592,6 +602,7 @@ Ext.define('PVE.qemu.HardwareView', {
 	    const noVMConfigDiskPerm = !caps.vms['VM.Config.Disk'];
 	    const noVMConfigCDROMPerm = !caps.vms['VM.Config.CDROM'];
 	    const noVMConfigCloudinitPerm = !caps.vms['VM.Config.Cloudinit'];
+	    const noVMConfigOptionsPerm = !caps.vms['VM.Config.Options'];
 
 	    me.down('#addUsb').setDisabled(noHWPerm || isAtUsbLimit());
 	    me.down('#addPci').setDisabled(noHWPerm || isAtLimit('hostpci'));
@@ -601,6 +612,7 @@ Ext.define('PVE.qemu.HardwareView', {
 	    me.down('#addRng').setDisabled(noSysConsolePerm || isAtLimit('rng'));
 	    efidisk_menuitem.setDisabled(noVMConfigDiskPerm || isAtLimit('efidisk'));
 	    me.down('#addTpmState').setDisabled(noVMConfigDiskPerm || isAtLimit('tpmstate'));
+	    me.down('#addVirtiofs').setDisabled(noVMConfigOptionsPerm || isAtLimit('virtiofs'));
 	    me.down('#addCloudinitDrive').setDisabled(noVMConfigCDROMPerm || noVMConfigCloudinitPerm || hasCloudInit);
 
 	    if (!rec) {
@@ -745,6 +757,13 @@ Ext.define('PVE.qemu.HardwareView', {
 				disabled: !caps.nodes['Sys.Console'],
 				handler: editorFactory('RNGEdit'),
 			    },
+			    {
+				text: gettext("Virtiofs"),
+				itemId: 'addVirtiofs',
+				iconCls: 'fa fa-folder',
+				disabled: !caps.nodes['Sys.Console'],
+				handler: editorFactory('VirtiofsEdit'),
+			    },
 			],
 		    }),
 		},
diff --git a/www/manager6/qemu/VirtiofsEdit.js b/www/manager6/qemu/VirtiofsEdit.js
new file mode 100644
index 00000000..4b12e7d9
--- /dev/null
+++ b/www/manager6/qemu/VirtiofsEdit.js
@@ -0,0 +1,137 @@
+Ext.define('PVE.qemu.VirtiofsInputPanel', {
+    extend: 'Proxmox.panel.InputPanel',
+    xtype: 'pveVirtiofsInputPanel',
+    onlineHelp: 'qm_virtiofs',
+
+    insideWizard: false,
+
+    onGetValues: function(values) {
+	var me = this;
+	var confid = me.confid;
+	var params = {};
+	delete values.delete;
+	params[confid] = PVE.Parser.printPropertyString(values, 'dirid');
+	return params;
+    },
+
+    setSharedfiles: function(confid, data) {
+	var me = this;
+	me.confid = confid;
+	me.virtiofs = data;
+	me.setValues(me.virtiofs);
+    },
+    initComponent: function() {
+	let me = this;
+
+	me.nodename = me.pveSelNode.data.node;
+	if (!me.nodename) {
+	    throw "no node name specified";
+	}
+	me.items = [
+	    {
+		xtype: 'pveDirMapSelector',
+		emptyText: 'dirid',
+		nodename: me.nodename,
+		fieldLabel: gettext('Directory ID'),
+		name: 'dirid',
+		allowBlank: false,
+	    },
+	    {
+		xtype: 'proxmoxKVComboBox',
+		fieldLabel: gettext('Cache'),
+		name: 'cache',
+		value: '__default__',
+		deleteDefaultValue: false,
+		comboItems: [
+		    ['__default__', Proxmox.Utils.defaultText + ' (auto)'],
+		    ['auto', 'auto'],
+		    ['always', 'always'],
+		    ['never', 'never'],
+		],
+	    },
+	    {
+		xtype: 'proxmoxKVComboBox',
+		fieldLabel: gettext('xattr'),
+		name: 'xattr',
+		value: '__default__',
+		deleteDefaultValue: false,
+		comboItems: [
+		    ['__default__', Proxmox.Utils.defaultText + ' (Mapping Settings)'],
+		    ['0', 'off'],
+		    ['1', 'on'],
+		],
+	    },
+	    {
+		xtype: 'proxmoxKVComboBox',
+		fieldLabel: gettext('acl (implies xattr)'),
+		name: 'acl',
+		value: '__default__',
+		deleteDefaultValue: false,
+		comboItems: [
+		    ['__default__', Proxmox.Utils.defaultText + ' (Mapping Settings)'],
+		    ['0', 'off'],
+		    ['1', 'on'],
+		],
+	    },
+	    {
+		xtype: 'proxmoxcheckbox',
+		fieldLabel: gettext('Direct-io'),
+		name: 'direct-io',
+	    },
+	];
+
+	me.virtiofs = {};
+	me.confid = 'virtiofs0';
+	me.callParent();
+    },
+});
+
+Ext.define('PVE.qemu.VirtiofsEdit', {
+    extend: 'Proxmox.window.Edit',
+
+    subject: gettext('Filesystem Passthrough'),
+
+    initComponent: function() {
+	var me = this;
+
+	me.isCreate = !me.confid;
+
+	var ipanel = Ext.create('PVE.qemu.VirtiofsInputPanel', {
+	    confid: me.confid,
+	    pveSelNode: me.pveSelNode,
+	    isCreate: me.isCreate,
+	});
+
+	Ext.applyIf(me, {
+	    items: ipanel,
+	});
+
+	me.callParent();
+
+	me.load({
+	    success: function(response) {
+		me.conf = response.result.data;
+		var i, confid;
+		if (!me.isCreate) {
+		    var value = me.conf[me.confid];
+		    var virtiofs = PVE.Parser.parsePropertyString(value, "dirid");
+		    if (!virtiofs) {
+			Ext.Msg.alert(gettext('Error'), 'Unable to parse virtiofs options');
+			me.close();
+			return;
+		    }
+		    ipanel.setSharedfiles(me.confid, virtiofs);
+		} else {
+		    for (i = 0; i < PVE.Utils.hardware_counts.virtiofs; i++) {
+			confid = 'virtiofs' + i.toString();
+			if (!Ext.isDefined(me.conf[confid])) {
+			    me.confid = confid;
+			    break;
+			}
+		    }
+		    ipanel.setSharedfiles(me.confid, {});
+		}
+	    },
+	});
+    },
+});
-- 
2.39.5



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel