From: Christoph Heiss <c.heiss@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [PATCH installer v3 2/2] assistant: avoid regex for simple prefix matching
Date: Thu, 14 Nov 2024 15:15:28 +0100 [thread overview]
Message-ID: <20241114141533.694491-3-c.heiss@proxmox.com> (raw)
In-Reply-To: <20241114141533.694491-1-c.heiss@proxmox.com>
udev properties are very easy to parse and can be done by doing a
line-based scan and matching the prefix, splitting once for properties.
Avoids the use of regexes and signicantly reduces binary size by about
-46%(!).
Tested by comparing the output of `proxmox-auto-install-assistant
device-info`, running it before and after the changes.
Stripped binary size for release builds:
before: 3869304 bytes ~ 3.69MiB
after: 2091608 bytes ~ 1.99MiB
text data bss dec hex filename
3580692 280920 545 3862157 3aee8d assistant-before
2031252 52336 505 2084093 1fccfd assistant-after
No functional changes.
Reviewed-By: Aaron Lauterer <a.lauterer@proxmox.com>
Tested-By: Aaron Lauterer <a.lauterer@proxmox.com>
Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
---
Changes v1 -> v2:
* rebased on latest master
Changes v2 -> v3:
* rebased on latest master
proxmox-auto-install-assistant/src/main.rs | 57 +++++++++-------------
1 file changed, 24 insertions(+), 33 deletions(-)
diff --git a/proxmox-auto-install-assistant/src/main.rs b/proxmox-auto-install-assistant/src/main.rs
index da1ebda..bdcf067 100644
--- a/proxmox-auto-install-assistant/src/main.rs
+++ b/proxmox-auto-install-assistant/src/main.rs
@@ -1,7 +1,6 @@
use anyhow::{bail, format_err, Result};
use clap::{Args, Parser, Subcommand, ValueEnum};
use glob::Pattern;
-use regex::Regex;
use serde::Serialize;
use std::{
collections::BTreeMap,
@@ -454,13 +453,9 @@ fn get_disks() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
Pattern::new("sr[0-9]*")?,
];
- // compile Regex here once and not inside the loop
- let re_disk = Regex::new(r"(?m)^E: DEVTYPE=disk")?;
- let re_cdrom = Regex::new(r"(?m)^E: ID_CDROM")?;
- let re_iso9660 = Regex::new(r"(?m)^E: ID_FS_TYPE=iso9660")?;
-
- let re_name = Regex::new(r"(?m)^N: (.*)$")?;
- let re_props = Regex::new(r"(?m)^E: ([^=]+)=(.*)$")?;
+ const PROP_DEVTYP_PREFIX: &str = "E: DEVTYPE=";
+ const PROP_CDROM: &str = "E: ID_CDROM";
+ const PROP_ISO9660_FS: &str = "E: ID_FS_TYPE=iso9660";
let mut disks: BTreeMap<String, BTreeMap<String, String>> = BTreeMap::new();
@@ -482,30 +477,27 @@ fn get_disks() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
}
};
- if !re_disk.is_match(&output) {
- continue 'outer;
- };
- if re_cdrom.is_match(&output) {
- continue 'outer;
- };
- if re_iso9660.is_match(&output) {
- continue 'outer;
- };
-
let mut name = filename;
- if let Some(cap) = re_name.captures(&output) {
- if let Some(res) = cap.get(1) {
- name = String::from(res.as_str());
+ let mut udev_props: BTreeMap<String, String> = BTreeMap::new();
+ for line in output.lines() {
+ if let Some(prop) = line.strip_prefix(PROP_DEVTYP_PREFIX) {
+ if prop != "disk" {
+ continue 'outer;
+ }
}
- }
- let mut udev_props: BTreeMap<String, String> = BTreeMap::new();
+ if line.starts_with(PROP_CDROM) || line.starts_with(PROP_ISO9660_FS) {
+ continue 'outer;
+ }
- for line in output.lines() {
- if let Some(caps) = re_props.captures(line) {
- let key = String::from(caps.get(1).unwrap().as_str());
- let value = String::from(caps.get(2).unwrap().as_str());
- udev_props.insert(key, value);
+ if let Some(prop) = line.strip_prefix("N: ") {
+ name = prop.to_owned();
+ };
+
+ if let Some(prop) = line.strip_prefix("E: ") {
+ if let Some((key, val)) = prop.split_once('=') {
+ udev_props.insert(key.to_owned(), val.to_owned());
+ }
}
}
@@ -515,7 +507,6 @@ fn get_disks() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
}
fn get_nics() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
- let re_props = Regex::new(r"(?m)^E: (.*)=(.*)$")?;
let mut nics: BTreeMap<String, BTreeMap<String, String>> = BTreeMap::new();
let links = get_nic_list()?;
@@ -533,10 +524,10 @@ fn get_nics() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
let mut udev_props: BTreeMap<String, String> = BTreeMap::new();
for line in output.lines() {
- if let Some(caps) = re_props.captures(line) {
- let key = String::from(caps.get(1).unwrap().as_str());
- let value = String::from(caps.get(2).unwrap().as_str());
- udev_props.insert(key, value);
+ if let Some(prop) = line.strip_prefix("E: ") {
+ if let Some((key, val)) = prop.split_once('=') {
+ udev_props.insert(key.to_owned(), val.to_owned());
+ }
}
}
--
2.47.0
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2024-11-14 14:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-14 14:15 [pve-devel] [PATCH installer v3 0/2] assistant: clean up glob patterns & regexes Christoph Heiss
2024-11-14 14:15 ` [pve-devel] [PATCH installer v3 1/2] tree-wide: run rustfmt, fix clippy warnings Christoph Heiss
2024-11-14 14:15 ` Christoph Heiss [this message]
2024-11-14 19:53 ` [pve-devel] applied: [PATCH installer v3 0/2] assistant: clean up glob patterns & regexes Thomas Lamprecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241114141533.694491-3-c.heiss@proxmox.com \
--to=c.heiss@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox