From: Stefan Hanreich <s.hanreich@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [PATCH pve-firewall v3 09/18] sdn: add vnet firewall configuration
Date: Tue, 12 Nov 2024 13:26:06 +0100 [thread overview]
Message-ID: <20241112122615.88854-10-s.hanreich@proxmox.com> (raw)
In-Reply-To: <20241112122615.88854-1-s.hanreich@proxmox.com>
Signed-off-by: Stefan Hanreich <s.hanreich@proxmox.com>
---
src/PVE/Firewall.pm | 127 ++++++++++++++++++++++++++++++++++--
src/PVE/Firewall/Helpers.pm | 12 ++++
2 files changed, 132 insertions(+), 7 deletions(-)
diff --git a/src/PVE/Firewall.pm b/src/PVE/Firewall.pm
index 6e02873..fc71d86 100644
--- a/src/PVE/Firewall.pm
+++ b/src/PVE/Firewall.pm
@@ -29,6 +29,7 @@ use PVE::RS::Firewall::SDN;
my $pvefw_conf_dir = "/etc/pve/firewall";
my $clusterfw_conf_filename = "$pvefw_conf_dir/cluster.fw";
+my $vnetfw_conf_dir = "/etc/pve/sdn/firewall";
# dynamically include PVE::QemuServer and PVE::LXC
# to avoid dependency problems
@@ -1290,6 +1291,12 @@ our $cluster_option_properties = {
optional => 1,
enum => ['ACCEPT', 'REJECT', 'DROP'],
},
+ policy_forward => {
+ description => "Forward policy.",
+ type => 'string',
+ optional => 1,
+ enum => ['ACCEPT', 'DROP'],
+ },
log_ratelimit => {
description => "Log ratelimiting settings",
type => 'string', format => {
@@ -1329,6 +1336,8 @@ our $host_option_properties = {
description => "Log level for incoming traffic." }),
log_level_out => get_standard_option('pve-fw-loglevel', {
description => "Log level for outgoing traffic." }),
+ log_level_forward => get_standard_option('pve-fw-loglevel', {
+ description => "Log level for forwarded traffic." }),
tcp_flags_log_level => get_standard_option('pve-fw-loglevel', {
description => "Log level for illegal tcp flags filter." }),
smurf_log_level => get_standard_option('pve-fw-loglevel', {
@@ -1476,6 +1485,23 @@ our $vm_option_properties = {
};
+our $vnet_option_properties = {
+ enable => {
+ description => "Enable/disable firewall rules.",
+ type => 'boolean',
+ default => 0,
+ optional => 1,
+ },
+ policy_forward => {
+ description => "Forward policy.",
+ type => 'string',
+ optional => 1,
+ enum => ['ACCEPT', 'DROP'],
+ },
+ log_level_forward => get_standard_option('pve-fw-loglevel', {
+ description => "Log level for forwarded traffic." }),
+};
+
my $addr_list_descr = "This can refer to a single IP address, an IP set ('+ipsetname') or an IP alias definition. You can also specify an address range like '20.34.101.207-201.3.9.99', or a list of IP addresses and networks (entries are separated by comma). Please do not mix IPv4 and IPv6 addresses inside such lists.";
@@ -1493,7 +1519,7 @@ my $rule_properties = {
description => "Rule type.",
type => 'string',
optional => 1,
- enum => ['in', 'out', 'group'],
+ enum => ['in', 'out', 'forward', 'group'],
},
action => {
description => "Rule action ('ACCEPT', 'DROP', 'REJECT') or security group name.",
@@ -1651,10 +1677,20 @@ my $rule_env_iface_lookup = {
'ct' => 1,
'vm' => 1,
'group' => 0,
+ 'vnet' => 0,
'cluster' => 1,
'host' => 1,
};
+my $rule_env_direction_lookup = {
+ 'ct' => ['in', 'out', 'group'],
+ 'vm' => ['in', 'out', 'group'],
+ 'group' => ['in', 'out', 'forward'],
+ 'cluster' => ['in', 'out', 'forward', 'group'],
+ 'host' => ['in', 'out', 'forward', 'group'],
+ 'vnet' => ['forward', 'group'],
+};
+
sub verify_rule {
my ($rule, $cluster_conf, $fw_conf, $rule_env, $noerr) = @_;
@@ -1725,8 +1761,17 @@ sub verify_rule {
&$add_error('action', "missing property") if !$action;
if ($type) {
- if ($type eq 'in' || $type eq 'out') {
- &$add_error('action', "unknown action '$action'")
+ my $valid_types = $rule_env_direction_lookup->{$rule_env}
+ or die "unknown rule_env '$rule_env'\n";
+
+ $add_error->('type', "invalid rule type '$type' for rule_env '$rule_env'")
+ if !(grep { $_ eq $type } @$valid_types);
+
+ if ($type eq 'in' || $type eq 'out' || $type eq 'forward') {
+ $add_error->('action', 'cannot define REJECT rules on forward chain')
+ if $type eq 'forward' && $action eq 'REJECT';
+
+ $add_error->('action', "unknown action '$action'")
if $action && ($action !~ m/^(ACCEPT|DROP|REJECT)$/);
} elsif ($type eq 'group') {
&$add_error('type', "security groups not allowed")
@@ -2829,7 +2874,7 @@ sub parse_fw_rule {
$rule->{type} = lc($1);
$rule->{action} = $2;
- if ($rule->{type} eq 'in' || $rule->{type} eq 'out') {
+ if ($rule->{type} eq 'in' || $rule->{type} eq 'out' || $rule->{type} eq 'forward') {
if ($rule->{action} =~ m/^(\S+)\((ACCEPT|DROP|REJECT)\)$/) {
$rule->{macro} = $1;
$rule->{action} = $2;
@@ -2943,7 +2988,7 @@ sub parse_hostfw_option {
if ($line =~ m/^(enable|nosmurfs|tcpflags|ndp|log_nf_conntrack|nf_conntrack_allow_invalid|protection_synflood|nftables):\s*(0|1)\s*$/i) {
$opt = lc($1);
$value = int($2);
- } elsif ($line =~ m/^(log_level_in|log_level_out|tcp_flags_log_level|smurf_log_level):\s*(($loglevels)\s*)?$/i) {
+ } elsif ($line =~ m/^(log_level_(?:in|out|forward)|tcp_flags_log_level|smurf_log_level):\s*(($loglevels)\s*)?$/i) {
$opt = lc($1);
$value = $2 ? lc($3) : '';
} elsif ($line =~ m/^(nf_conntrack_helpers):\s*(((\S+)[,]?)+)\s*$/i) {
@@ -2974,7 +3019,7 @@ sub parse_clusterfw_option {
} elsif ($line =~ m/^(ebtables):\s*(0|1)\s*$/i) {
$opt = lc($1);
$value = int($2);
- } elsif ($line =~ m/^(policy_(in|out)):\s*(ACCEPT|DROP|REJECT)\s*$/i) {
+ } elsif ($line =~ m/^(policy_(in|out|forward)):\s*(ACCEPT|DROP|REJECT)\s*$/i) {
$opt = lc($1);
$value = uc($3);
} elsif ($line =~ m/^(log_ratelimit):\s*(\S+)\s*$/) {
@@ -2987,6 +3032,24 @@ sub parse_clusterfw_option {
return ($opt, $value);
}
+sub parse_vnetfw_option {
+ my ($line) = @_;
+
+ my ($opt, $value);
+
+ if ($line =~ m/^(enable):\s*(\d+)\s*$/i) {
+ $opt = lc($1);
+ $value = int($2);
+ } elsif ($line =~ m/^(policy_forward):\s*(ACCEPT|DROP)\s*$/i) {
+ $opt = lc($1);
+ $value = uc($2);
+ } else {
+ die "can't parse option '$line'\n"
+ }
+
+ return ($opt, $value);
+}
+
sub resolve_alias {
my ($clusterfw_conf, $fw_conf, $cidr, $scope) = @_;
@@ -3153,6 +3216,8 @@ sub generic_fw_config_parser {
($opt, $value) = parse_clusterfw_option($line);
} elsif ($rule_env eq 'host') {
($opt, $value) = parse_hostfw_option($line);
+ } elsif ($rule_env eq 'vnet') {
+ ($opt, $value) = parse_vnetfw_option($line);
} else {
($opt, $value) = parse_vmfw_option($line);
}
@@ -3292,6 +3357,10 @@ sub lock_vmfw_conf {
return PVE::Firewall::Helpers::lock_vmfw_conf(@_);
}
+sub lock_vnetfw_conf {
+ return PVE::Firewall::Helpers::lock_vnetfw_conf(@_);
+}
+
sub load_vmfw_conf {
my ($cluster_conf, $rule_env, $vmid, $dir) = @_;
@@ -3318,7 +3387,7 @@ my $format_rules = sub {
my $raw = '';
foreach my $rule (@$rules) {
- if ($rule->{type} eq 'in' || $rule->{type} eq 'out' || $rule->{type} eq 'group') {
+ if (grep { $_ eq $rule->{type} } qw(in out forward group)) {
$raw .= '|' if defined($rule->{enable}) && !$rule->{enable};
$raw .= uc($rule->{type});
if ($rule->{macro}) {
@@ -3794,6 +3863,50 @@ sub save_hostfw_conf {
}
}
+sub load_vnetfw_conf {
+ my ($cluster_conf, $rule_env, $vnet, $dir) = @_;
+
+ $rule_env = 'vnet' if !defined($rule_env);
+
+ my $filename = "$vnetfw_conf_dir/$vnet.fw";
+
+ my $empty_conf = {
+ rules => [],
+ options => {},
+ };
+
+ my $vnetfw_conf = generic_fw_config_parser($filename, $cluster_conf, $empty_conf, $rule_env);
+ $vnetfw_conf->{vnet} = $vnet;
+
+ return $vnetfw_conf;
+}
+
+sub save_vnetfw_conf {
+ my ($vnet, $conf) = @_;
+
+ my $filename = "$vnetfw_conf_dir/$vnet.fw";
+
+ my $raw = '';
+
+ my $options = $conf->{options};
+ $raw .= &$format_options($options) if $options && scalar(keys %$options);
+
+ my $rules = $conf->{rules};
+ if ($rules && scalar(@$rules)) {
+ $raw .= "[RULES]\n\n";
+ $raw .= &$format_rules($rules, 1);
+ $raw .= "\n";
+ }
+
+ mkdir($vnetfw_conf_dir, 0755) if !-d $vnetfw_conf_dir;
+
+ if ($raw) {
+ PVE::Tools::file_set_contents($filename, $raw);
+ } else {
+ unlink $filename;
+ }
+}
+
sub compile {
my ($cluster_conf, $hostfw_conf, $vmdata, $corosync_conf) = @_;
diff --git a/src/PVE/Firewall/Helpers.pm b/src/PVE/Firewall/Helpers.pm
index 7dcbca3..0b465ae 100644
--- a/src/PVE/Firewall/Helpers.pm
+++ b/src/PVE/Firewall/Helpers.pm
@@ -32,6 +32,18 @@ sub lock_vmfw_conf {
return $res;
}
+sub lock_vnetfw_conf {
+ my ($vnet, $timeout, $code, @param) = @_;
+
+ die "can't lock vnet firewall config for undefined vnet\n"
+ if !defined($vnet);
+
+ my $res = PVE::Cluster::cfs_lock_firewall("vnet-$vnet", $timeout, $code, @param);
+ die $@ if $@;
+
+ return $res;
+}
+
sub remove_vmfw_conf {
my ($vmid) = @_;
--
2.39.5
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
next prev parent reply other threads:[~2024-11-12 12:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-12 12:25 [pve-devel] [PATCH docs/firewall/manager/network/proxmox{-ve-rs, -firewall} v3 00/18] add forward chain firewalling for hosts and vnets Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 01/18] firewall: add forward direction Stefan Hanreich
2024-11-12 12:25 ` [pve-devel] [PATCH proxmox-ve-rs v3 02/18] firewall: add bridge firewall config parser Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH proxmox-ve-rs v3 03/18] config: firewall: add tests for interface and directions Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH proxmox-ve-rs v3 04/18] host: add struct representing bridge names Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH proxmox-firewall v3 05/18] nftables: derive additional traits for nftables types Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH proxmox-firewall v3 06/18] sdn: add support for loading vnet-level firewall config Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH proxmox-firewall v3 07/18] sdn: create forward firewall rules Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH proxmox-firewall v3 08/18] use std::mem::take over drain() Stefan Hanreich
2024-11-12 12:26 ` Stefan Hanreich [this message]
2024-11-12 12:26 ` [pve-devel] [PATCH pve-firewall v3 10/18] api: add vnet endpoints Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-firewall v3 11/18] firewall: move to arrow syntax for calling functions Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-manager v3 12/18] firewall: add forward direction to rule panel Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-manager v3 13/18] firewall: add vnet to firewall options component Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-manager v3 14/18] firewall: make base_url dynamically configurable in " Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-manager v3 15/18] sdn: add firewall panel Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-manager v3 16/18] firewall: rules: show warning when creating forward rules Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-network v3 17/18] firewall: add endpoints for vnet-level firewall Stefan Hanreich
2024-11-12 12:26 ` [pve-devel] [PATCH pve-docs v3 18/18] firewall: add documentation for forward direction Stefan Hanreich
2024-11-13 15:37 ` Hannes Duerr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241112122615.88854-10-s.hanreich@proxmox.com \
--to=s.hanreich@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox