[pve-devel] [PATCH qemu-server v10 2/4] config: add AMD SEV support

[Markus Frank <m.frank@proxmox.com>]

This patch is for enabling AMD SEV (Secure Encrypted Virtualization)
support in QEMU.

VM-Config-Examples:
amd_sev: type=std,no-debug=1,no-key-sharing=1
amd_sev: es,no-debug=1,kernel-hashes=1

kernel-hashes, reduced-phys-bios & cbitpos correspond to the variables
with the same name in QEMU.

kernel-hashes=1 adds kernel-hashes to enable measured linux kernel
launch since it is per default off for backward compatibility.

reduced-phys-bios and cbitpos are system specific and are read out by
the query-machine-capabilities.service on boot and saved to the
/run/qemu-server/host-hw-capabilities.json file. This file is parsed
and than used by qemu-server to correctly start a AMD SEV VM.

type=std stands for standard sev to differentiate it from sev-es (es)
or sev-snp (snp) when support is upstream.

QEMU's sev-guest policy gets calculated with the parameters nodbg
& noks. These parameters correspond to policy-bits 0 & 1. If type is
'es' than policy-bit 2 gets set to 1 to activate SEV-ES. Policy bit 3
(nosend) is always set to 1, because migration features for sev are
not upstream yet and are attackable.

SEV-ES is highly experimental since it could not be tested.

see coherent doc patch

Signed-off-by: Markus Frank <m.frank@proxmox.com>
---
changes v10:
* also die if the BIOS is not set, since the default is SeaBIOS

 PVE/API2/Qemu.pm   | 11 +++++++
 PVE/QemuMigrate.pm |  4 +++
 PVE/QemuServer.pm  | 79 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 94 insertions(+)

diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index 2a349c8..c29809d 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -4512,6 +4512,11 @@ __PACKAGE__->register_method({
 	    push $local_resources->@*, "clipboard=vnc";
 	}
 
+	# do not allow live migration with AMD SEV enabled
+	if ($res->{running} && $vmconf->{amd_sev}) {
+	    push $local_resources->@*, "amd_sev";
+	}
+
 	# if vm is not running, return target nodes where local storage/mapped devices are available
 	# for offline migration
 	if (!$res->{running}) {
@@ -5192,6 +5197,12 @@ __PACKAGE__->register_method({
 	die "unable to use snapshot name 'pending' (reserved name)\n"
 	    if lc($snapname) eq 'pending';
 
+	my $conf = PVE::QemuConfig->load_config($vmid);
+	if ($param->{vmstate} && $conf->{amd_sev}) {
+	    die "Snapshots that include memory are not supported while memory"
+		." is encrypted by AMD SEV.\n"
+	}
+
 	my $realcmd = sub {
 	    PVE::Cluster::log_msg('info', $authuser, "snapshot VM $vmid: $snapname");
 	    PVE::QemuConfig->snapshot_create($vmid, $snapname, $param->{vmstate},
diff --git a/PVE/QemuMigrate.pm b/PVE/QemuMigrate.pm
index 8d9b35a..340402a 100644
--- a/PVE/QemuMigrate.pm
+++ b/PVE/QemuMigrate.pm
@@ -260,6 +260,10 @@ sub prepare {
 	die "VMs with 'clipboard' set to 'vnc' are not live migratable!\n";
     }
 
+    if ($running && $conf->{'amd_sev'}) {
+	die "cannot live-migrate VM when AMD SEV is enabled.\n";
+    }
+
     my $vollist = PVE::QemuServer::get_vm_volumes($conf);
 
     my $storages = {};
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index 82e7d6a..92960c5 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -177,6 +177,37 @@ my $agent_fmt = {
     },
 };
 
+my $sev_fmt = {
+    type => {
+	description => "Enable standard SEV with type='std' or enable"
+	    ." experimental SEV-ES with the 'es' option.",
+	type => 'string',
+	default_key => 1,
+	format_description => "sev-type",
+	enum => ['std', 'es'],
+	maxLength => 3,
+    },
+    'no-debug' => {
+	description => "Sets policy bit 0 to 1 to disallow debugging of guest",
+	type => 'boolean',
+	default => 0,
+	optional => 1,
+    },
+    'no-key-sharing' => {
+	description => "Sets policy bit 1 to 1 to disallow key sharing with other guests",
+	type => 'boolean',
+	default => 0,
+	optional => 1,
+    },
+    "kernel-hashes" => {
+	description => "Add kernel hashes to guest firmware for measured linux kernel launch",
+	type => 'boolean',
+	default => 0,
+	optional => 1,
+    },
+};
+PVE::JSONSchema::register_format('pve-qemu-sev-fmt', $sev_fmt);
+
 my $vga_fmt = {
     type => {
 	description => "Select the VGA type.",
@@ -358,6 +389,12 @@ my $confdesc = {
 	description => "Memory properties.",
 	format => $PVE::QemuServer::Memory::memory_fmt
     },
+    amd_sev => {
+	description => "Secure Encrypted Virtualization (SEV) features by AMD CPUs",
+	optional => 1,
+	format => 'pve-qemu-sev-fmt',
+	type => 'string',
+    },
     balloon => {
 	optional => 1,
 	type => 'integer',
@@ -4091,6 +4128,39 @@ sub config_to_command {
 	}
     }
 
+    if ($conf->{amd_sev}) {
+	if (!$conf->{bios} || ($conf->{bios} && $conf->{bios} ne 'ovmf')) {
+	    die "For using SEV you need to change your guest bios to ovmf.\n";
+	}
+
+	my $amd_sev_conf = parse_property_string($sev_fmt, $conf->{amd_sev});
+	my $sev_hw_caps = get_hw_capabilities()->{'amd-sev'};
+
+	if (!$sev_hw_caps->{'sev-support'}) {
+	    die "Your CPU does not support AMD SEV!\n";
+	}
+	if ($amd_sev_conf->{type} eq 'es' && !$sev_hw_caps->{'sev-support-es'}) {
+	    die "Your CPU does not support AMD SEV-ES!\n";
+	}
+
+	my $sev_mem_object = 'sev-guest,id=sev0'
+	    .',cbitpos='.$sev_hw_caps->{cbitpos}
+	    .',reduced-phys-bits='.$sev_hw_caps->{'reduced-phys-bits'};
+
+	my $policy = 0b0;
+	$policy += 0b1 if ($amd_sev_conf->{'no-debug'});
+	$policy += 0b10 if ($amd_sev_conf->{'no-key-sharing'});
+	$policy += 0b100 if ($amd_sev_conf->{type} eq 'es');
+	# disable migration with bit 3 nosend to prevent amd-sev-migration-attack
+	$policy += 0b1000;
+
+	$sev_mem_object .= ',policy='.sprintf("%#x", $policy);
+	$sev_mem_object .= ',kernel-hashes=on' if ($amd_sev_conf->{'kernel-hashes'});
+
+	push @$devices, '-object' , $sev_mem_object;
+	push @$machineFlags, 'confidential-guest-support=sev0';
+    }
+
     push @$cmd, @$devices;
     push @$cmd, '-rtc', join(',', @$rtcFlags) if scalar(@$rtcFlags);
     push @$cmd, '-machine', join(',', @$machineFlags) if scalar(@$machineFlags);
@@ -4134,6 +4204,15 @@ sub check_rng_source {
     }
 }
 
+sub get_hw_capabilities {
+    # Get reduced-phys-bits & cbitpos from host-hw-capabilities.json
+    my $filename = '/run/qemu-server/host-hw-capabilities.json';
+    my $json_text = PVE::Tools::file_get_contents($filename);
+    ($json_text) = $json_text =~ /(.*)/; # untaint json text
+    my $hw_capabilities = decode_json($json_text);
+    return $hw_capabilities;
+}
+
 sub spice_port {
     my ($vmid) = @_;
 
-- 
2.39.2



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel