public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
From: Aaron Lauterer <a.lauterer@proxmox.com>
To: pve-devel@lists.proxmox.com
Subject: [pve-devel] [PATCH installer v3 1/2] assistant: keep prepared iso bootable on uefi with flash drives
Date: Tue, 30 Apr 2024 12:46:08 +0200	[thread overview]
Message-ID: <20240430104609.149766-2-a.lauterer@proxmox.com> (raw)
In-Reply-To: <20240430104609.149766-1-a.lauterer@proxmox.com>

By mapping files into the ISO, the UUID for the partitions change as
they depend on the timestamp. The result is, that grub cannot find its
partition anymore and the user ends up on the grub shell.

This only happens when booting from a blockdev in UEFI mode. E.g. a USB
flash drive. Alternatively one can `dd` the ISO to a small (2GiB) VM
disk and mark it as the first boot device.

When booting in legacy mode or via CDROM (e.g. pass through via IPMI),
it worked.

Xorriso can report the commands needed to recreate the source ISO. The
'-volume_date uuid' is the one needed to override the same UUIDs. We
therefore read it first from the source iso and pass it as parameter
whenever we inject a file into the iso.

Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Tested-by: Stoiko Ivanov <s.ivanov@proxmox.com>
---
changes since:
v2:
* add missing import of format_err to patch
v1:
* improve error handling should xorriso return empty output

 proxmox-auto-install-assistant/src/main.rs | 46 ++++++++++++++++++++--
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/proxmox-auto-install-assistant/src/main.rs b/proxmox-auto-install-assistant/src/main.rs
index 0debd29..f8e5ed0 100644
--- a/proxmox-auto-install-assistant/src/main.rs
+++ b/proxmox-auto-install-assistant/src/main.rs
@@ -1,4 +1,4 @@
-use anyhow::{bail, Result};
+use anyhow::{bail, format_err, Result};
 use clap::{Args, Parser, Subcommand, ValueEnum};
 use glob::Pattern;
 use regex::Regex;
@@ -276,6 +276,7 @@ fn show_system_info(_args: &CommandSystemInfo) -> Result<()> {
 
 fn prepare_iso(args: &CommandPrepareISO) -> Result<()> {
     check_prepare_requirements(args)?;
+    let uuid = get_iso_uuid(&args.input)?;
 
     if args.fetch_from == FetchAnswerFrom::Iso && args.answer_file.is_none() {
         bail!("Missing path to the answer file required for the fetch-from 'iso' mode.");
@@ -331,10 +332,15 @@ fn prepare_iso(args: &CommandPrepareISO) -> Result<()> {
     instmode_file_tmp.push("auto-installer-mode.toml");
     fs::write(&instmode_file_tmp, toml::to_string_pretty(&config)?)?;
 
-    inject_file_to_iso(&tmp_iso, &instmode_file_tmp, "/auto-installer-mode.toml")?;
+    inject_file_to_iso(
+        &tmp_iso,
+        &instmode_file_tmp,
+        "/auto-installer-mode.toml",
+        &uuid,
+    )?;
 
     if let Some(answer_file) = &args.answer_file {
-        inject_file_to_iso(&tmp_iso, answer_file, "/answer.toml")?;
+        inject_file_to_iso(&tmp_iso, answer_file, "/answer.toml", &uuid)?;
     }
 
     println!("Moving prepared ISO to target location...");
@@ -371,11 +377,14 @@ fn final_iso_location(args: &CommandPrepareISO) -> PathBuf {
     target.to_path_buf()
 }
 
-fn inject_file_to_iso(iso: &PathBuf, file: &PathBuf, location: &str) -> Result<()> {
+fn inject_file_to_iso(iso: &PathBuf, file: &PathBuf, location: &str, uuid: &String) -> Result<()> {
     let result = Command::new("xorriso")
         .arg("--boot_image")
         .arg("any")
         .arg("keep")
+        .arg("-volume_date")
+        .arg("uuid")
+        .arg(uuid)
         .arg("-dev")
         .arg(iso)
         .arg("-map")
@@ -391,6 +400,35 @@ fn inject_file_to_iso(iso: &PathBuf, file: &PathBuf, location: &str) -> Result<(
     Ok(())
 }
 
+fn get_iso_uuid(iso: &PathBuf) -> Result<String> {
+    let result = Command::new("xorriso")
+        .arg("-dev")
+        .arg(iso)
+        .arg("-report_system_area")
+        .arg("cmd")
+        .output()?;
+    if !result.status.success() {
+        bail!(
+            "Error determining the UUID of the source ISO: {}",
+            String::from_utf8_lossy(&result.stderr)
+        );
+    }
+    let mut uuid = String::new();
+    for line in String::from_utf8(result.stdout)?.lines() {
+        if line.starts_with("-volume_date uuid") {
+            uuid = line
+                .split(' ')
+                .last()
+                .ok_or_else(|| format_err!("xorriso did behave unexpextedly"))?
+                .replace('\'', "")
+                .trim()
+                .into();
+            break;
+        }
+    }
+    Ok(uuid)
+}
+
 fn get_disks() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
     let unwantend_block_devs = vec![
         "ram[0-9]*",
-- 
2.39.2



_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel


  reply	other threads:[~2024-04-30 10:46 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-30 10:46 [pve-devel] [PATCH installer v3 0/2] " Aaron Lauterer
2024-04-30 10:46 ` Aaron Lauterer [this message]
2024-04-30 10:46 ` [pve-devel] [PATCH installer v3 2/2] assistant: use single dash for xorriso parameter Aaron Lauterer
2024-04-30 15:10 ` [pve-devel] [PATCH installer v3 0/2] assistant: keep prepared iso bootable on uefi with flash drives Stoiko Ivanov
2024-05-08  8:00 ` Aaron Lauterer
2024-05-08 14:06 ` [pve-devel] applied-series: " Thomas Lamprecht

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240430104609.149766-2-a.lauterer@proxmox.com \
    --to=a.lauterer@proxmox.com \
    --cc=pve-devel@lists.proxmox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal