* [pve-devel] [PATCH docs] firmware: adapt to proxmox packaged fwupd
@ 2024-04-19 18:43 Stoiko Ivanov
0 siblings, 0 replies; only message in thread
From: Stoiko Ivanov @ 2024-04-19 18:43 UTC (permalink / raw)
To: pve-devel
We ship our own fwupd package, since it needs to handle the
differently named efi_os_dir (proxmox vs debian).
Due to our experience with `udisks2` causing issues on hypervisors,
our package downgraded the Recommends udisks2, to a Suggests.
The downside is, that users need to explicitly set their ESP
mountpoint in the config file.
Additionally a minor stylistic rephrasing (is an option vs. could be
an option).
Tested this today, while giving our fwupd package a spin.
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
---
firmware-updates.adoc | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/firmware-updates.adoc b/firmware-updates.adoc
index 279cf11..8354955 100644
--- a/firmware-updates.adoc
+++ b/firmware-updates.adoc
@@ -43,13 +43,22 @@ ConnectX or
https://techdocs.broadcom.com/us/en/storage-and-ethernet-connectivity/ethernet-nic-controllers/bcm957xxx/adapters/software-installation/updating-the-firmware/manually-updating-the-adapter-firmware-on-linuxesx.html['bnxtnvm'/'niccli']
for Broadcom network cards.
-* https://fwupd.org[LVFS] could also be an option if there is a cooperation with
-a https://fwupd.org/lvfs/vendors/[vendor] and
+* https://fwupd.org[LVFS] is also an option if there is a cooperation with
+the https://fwupd.org/lvfs/vendors/[hardware vendor] and
https://fwupd.org/lvfs/devices/[supported hardware] in use. The technical
-requirement for this is that the system was manufactured after 2014, is booted
-via UEFI and the easiest way is to mount the EFI partition from which you boot
-(`mount /dev/disk/by-partuuid/<from efibootmgr -v> /boot/efi`) before installing
-'fwupd'.
+requirement for this is that the system was manufactured after 2014 and is
+booted via UEFI.
+
+Since {pve} ships its own version of the `fwupd` package, for Secure Boot
+Support with the Proxmox signing key, which does not recommend the `udisks2`
+package, due to observed issues with its use on hypervisors setting the mount
+point of the EFI partition in `/etc/fwupd/daemon.conf` is necessary:
+
+.File `/etc/fwupd/daemon.conf`
+----
+# Override the location used for the EFI system partition (ESP) path.
+EspLocation=/boot/efi
+----
TIP: If the update instructions require a host reboot, make sure that it can be
done safely. See also xref:ha_manager_node_maintenance[Node Maintenance].
--
2.39.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2024-04-19 18:43 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-19 18:43 [pve-devel] [PATCH docs] firmware: adapt to proxmox packaged fwupd Stoiko Ivanov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox