public inbox for pve-devel@lists.proxmox.com
 help / color / mirror / Atom feed
* [pve-devel] [PATCH stable-7 qemu] fix #2258: select correct device when removing drive snapshot via QEMU
@ 2024-03-21 12:29 Maximiliano Sandoval
  2024-03-22  9:35 ` [pve-devel] applied: " Thomas Lamprecht
  0 siblings, 1 reply; 2+ messages in thread
From: Maximiliano Sandoval @ 2024-03-21 12:29 UTC (permalink / raw)
  To: pve-devel

The QMP command needs to be issued for the device where the disk is
currently attached, not for the device where the disk was attached at
the time the snapshot was taken.

Fixes the following scenario with a disk image for which
do_snapshots_with_qemu() is true (i.e. qcow2 or RBD+krbd=0):
1. Take snapshot while disk image is attached to a given bus+ID.
2. Detach disk image.
3. Attach disk image to a different bus+ID.
4. Remove snapshot.

Previously, this would result in an error like:
> blockdev-snapshot-delete-internal-sync' failed - Cannot find device=drive-scsi1 nor node_name=drive-scsi1

While the $running parameter for volume_snapshot_delete() is planned
to be removed on the next storage plugin APIAGE reset, it currently
causes an immediate return in Storage/Plugin.pm. So passing a truthy
value would prevent removing a snapshot from an unused qcow2 disk that
was still used at the time the snapshot was taken. Thus, and because
some exotic third party plugin might be using it for whatever reason,
it's necessary to keep passing the same value as before.

Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Maximiliano Sandoval <m.sandoval@proxmox.com>
---

This is a backport for Proxmox VE 7 of
https://lists.proxmox.com/pipermail/pve-devel/2022-September/054124.html which
was applied at
https://git.proxmox.com/?p=qemu-server.git;a=commit;h=c60586838a4bfbd4f879c509195cbfb1291db443.

I tested this by creating a new Proxmox VE 7.4 VM, creating a new VM inside with
storage as IDE, taking a snapshot while the VM is running, detach the storage
and add it back as SCSI, then deleting the snapshot.

 PVE/QemuServer.pm | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index ab33aa3..be7a84e 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -4800,21 +4800,26 @@ sub qemu_volume_snapshot_delete {
     my ($vmid, $deviceid, $storecfg, $volid, $snap) = @_;
 
     my $running = check_running($vmid);
+    my $attached_deviceid;
 
-    if($running) {
-
-	$running = undef;
+    if ($running) {
 	my $conf = PVE::QemuConfig->load_config($vmid);
 	PVE::QemuConfig->foreach_volume($conf, sub {
 	    my ($ds, $drive) = @_;
-	    $running = 1 if $drive->{file} eq $volid;
+	    $attached_deviceid = "drive-$ds" if $drive->{file} eq $volid;
 	});
     }
 
-    if ($running && do_snapshots_with_qemu($storecfg, $volid, $deviceid)) {
-	mon_cmd($vmid, 'blockdev-snapshot-delete-internal-sync', device => $deviceid, name => $snap);
+    if ($attached_deviceid && do_snapshots_with_qemu($storecfg, $volid, $attached_deviceid)) {
+	mon_cmd(
+	    $vmid,
+	    'blockdev-snapshot-delete-internal-sync',
+	    device => $attached_deviceid,
+	    name => $snap,
+	);
     } else {
-	PVE::Storage::volume_snapshot_delete($storecfg, $volid, $snap, $running);
+	PVE::Storage::volume_snapshot_delete(
+	    $storecfg, $volid, $snap, $attached_deviceid ? 1 : undef);
     }
 }
 
-- 
2.39.2





^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2024-03-22  9:36 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-21 12:29 [pve-devel] [PATCH stable-7 qemu] fix #2258: select correct device when removing drive snapshot via QEMU Maximiliano Sandoval
2024-03-22  9:35 ` [pve-devel] applied: " Thomas Lamprecht

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Service provided by Proxmox Server Solutions GmbH | Privacy | Legal