* [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation
@ 2024-01-23 17:00 Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 01/18] tui: common: move InstallConfig struct to common crate Aaron Lauterer
` (18 more replies)
0 siblings, 19 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
This patch series adds the possibility to do an automated / unattended
installation of Proxmox VE.
It assumes that the patch series to use JSON output on the
low-level-installer is already applied [1].
The overall idea is that we will have a dedicated ISO for the unattended
installation. It should be configured in such a way that it will start
the installation without any user interaction.
Though the integration in the installation environmend isn't part of
this patch series.
The information for the installer that is usually gathered interactively
from the user is provided via an `answer.toml` file.
The answer file allows to select disks and the network card via filters.
The installer also allows to run custom commands pre and post
installation. This should give users plenty of possibilities to either
further customize/prepare the installation or integrate it into a larger
automated installation setup.
For example, one could issue HTTP requests to signal the status and
progress of the installation.
The install environment needs to call the 'proxmox-fetch-answer' binary.
It tries to find the answer file and once found, will start the
'proxmox-auto-installer' binary and pass the contents to it via stdin.
The auto-installer then parses the answer file and determines what
parameters need to be passed to the low-level installer. For example,
which disks and NIC to use, network IP settings and so forth.
The current status reporting of the actual installation is kept rather
simple.
Both binaries log into the /tmp/ directory.
There is a third binary, the 'proxmox-installer-filter'. It is meant as
a pure utility for users to make it easier to see what properties they
can write filters against and to test the filters.
The fetch-answer binary is currently searching for a
partition/file-system labeled 'proxmoxinst' in lower or uppercase. It
can be located on an additioan USB flash drive, or maybe on the install
medium itself if it is possible to write to it.
We do have some ideas for additional steps to fetch an answer file. The
main one is that we could download the answer file from a URL. Ideally
we would send unique properties along with the request (MAC addresses,
serial numbers, ...) so that it is possible to have a script on the
receiving side that can then generate the answer file dynamically.
The big question is, where the URL comes from, for which we have also
some ideas:
* custom DHCP options
* kernel cmdline (might be an option with PXE boot)
* TXT DNS record in a predefined subdomain of the search domain received
via DHCP, basically a 'dig TXT proxmoxinst.{search domain}'.
* We should also make it possible to provide an SSL fingerprint in a
similar manner in case the listening server is not trusted out of the
box.
Other plans / ideas for the future:
* add option to define remote SSH access (password and,or public key).
This could make remote debugging in case of problems easier
Regarding the patch series itself:
The first patches are needed to move some code into the common crate and
make structs/functions already in the common crate accessible.
I did split up the individual parts of the auto installer into their own
patches as much as possible, and (hopefully) in the order they depend on
each other.
Areas that can be improved/extended:
* Testing possibility integrated in the Makefile
* Documentation: explain process, additional examples for answer.toml
[0] https://lists.proxmox.com/pipermail/pve-devel/2023-September/059020.html
[1] https://lists.proxmox.com/pipermail/pve-devel/2023-December/060961.html
installer: Aaron Lauterer (17):
tui: common: move InstallConfig struct to common crate
common: make InstallZfsOption members public
common: tui: use BTreeMap for predictable ordering
Makefile: fix handling of multiple usr_bin files
low-level: add dump-udev command
add auto-installer crate
auto-installer: add dependencies
auto-installer: add answer file definition
auto-installer: add struct to hold udev info
auto-installer: add utils
auto-installer: add simple logging
auto-installer: add tests for answer file parsing
auto-installer: add auto-installer binary
auto-installer: add fetch answer binary
auto-installer: use glob crate for pattern matching
auto-installer: utils: make get_udev_index functions public
auto-installer: add proxmox-installer-filter helper tool
docs: Aaron Lauterer (1):
installation: add unattended documentation
pve-installation.adoc | 267 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 267 insertions(+)
Cargo.toml | 1 +
Makefile | 9 +-
Proxmox/Makefile | 1 +
Proxmox/Sys/Udev.pm | 54 ++
proxmox-auto-installer/Cargo.toml | 19 +
proxmox-auto-installer/src/answer.rs | 148 ++++++
.../src/bin/proxmox-auto-installer.rs | 192 ++++++++
.../src/bin/proxmox-fetch-answer.rs | 73 +++
.../src/bin/proxmox-installer-filter.rs | 298 +++++++++++
.../src/fetch_plugins/mod.rs | 1 +
.../src/fetch_plugins/partition.rs | 102 ++++
proxmox-auto-installer/src/lib.rs | 5 +
proxmox-auto-installer/src/log.rs | 38 ++
proxmox-auto-installer/src/udevinfo.rs | 9 +
proxmox-auto-installer/src/utils.rs | 461 ++++++++++++++++++
proxmox-auto-installer/tests/parse-answer.rs | 102 ++++
.../tests/resources/iso-info.json | 1 +
.../tests/resources/locales.json | 1 +
.../resources/parse_answer/disk_match.json | 29 ++
.../resources/parse_answer/disk_match.toml | 14 +
.../parse_answer/disk_match_all.json | 26 +
.../parse_answer/disk_match_all.toml | 16 +
.../parse_answer/disk_match_any.json | 33 ++
.../parse_answer/disk_match_any.toml | 16 +
.../tests/resources/parse_answer/minimal.json | 17 +
.../tests/resources/parse_answer/minimal.toml | 14 +
.../resources/parse_answer/nic_matching.json | 17 +
.../resources/parse_answer/nic_matching.toml | 19 +
.../tests/resources/parse_answer/readme | 4 +
.../resources/parse_answer/specific_nic.json | 17 +
.../resources/parse_answer/specific_nic.toml | 19 +
.../tests/resources/parse_answer/zfs.json | 27 +
.../tests/resources/parse_answer/zfs.toml | 19 +
.../tests/resources/run-env-info.json | 1 +
.../tests/resources/run-env-udev.json | 1 +
proxmox-installer-common/src/setup.rs | 100 +++-
proxmox-low-level-installer | 13 +
proxmox-tui-installer/src/options.rs | 4 +-
proxmox-tui-installer/src/setup.rs | 100 +---
.../src/views/install_progress.rs | 4 +-
40 files changed, 1915 insertions(+), 110 deletions(-)
create mode 100644 Proxmox/Sys/Udev.pm
create mode 100644 proxmox-auto-installer/Cargo.toml
create mode 100644 proxmox-auto-installer/src/answer.rs
create mode 100644 proxmox-auto-installer/src/bin/proxmox-auto-installer.rs
create mode 100644 proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs
create mode 100644 proxmox-auto-installer/src/bin/proxmox-installer-filter.rs
create mode 100644 proxmox-auto-installer/src/fetch_plugins/mod.rs
create mode 100644 proxmox-auto-installer/src/fetch_plugins/partition.rs
create mode 100644 proxmox-auto-installer/src/lib.rs
create mode 100644 proxmox-auto-installer/src/log.rs
create mode 100644 proxmox-auto-installer/src/udevinfo.rs
create mode 100644 proxmox-auto-installer/src/utils.rs
create mode 100644 proxmox-auto-installer/tests/parse-answer.rs
create mode 100644 proxmox-auto-installer/tests/resources/iso-info.json
create mode 100644 proxmox-auto-installer/tests/resources/locales.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/minimal.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/minimal.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/nic_matching.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/nic_matching.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/readme
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/specific_nic.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/specific_nic.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/zfs.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/zfs.toml
create mode 100644 proxmox-auto-installer/tests/resources/run-env-info.json
create mode 100644 proxmox-auto-installer/tests/resources/run-env-udev.json
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 01/18] tui: common: move InstallConfig struct to common crate
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 02/18] common: make InstallZfsOption members public Aaron Lauterer
` (17 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
It describes the data structure expected by the low-level-installer.
We do this so we can use it in more than the TUI installer, for example
the planned auto installer.
Make the members public so we can easily implement a custom From method
for each dependent crate.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-installer-common/src/setup.rs | 86 +++++++++++++++-
proxmox-tui-installer/src/setup.rs | 98 +------------------
.../src/views/install_progress.rs | 4 +-
3 files changed, 90 insertions(+), 98 deletions(-)
diff --git a/proxmox-installer-common/src/setup.rs b/proxmox-installer-common/src/setup.rs
index 472e1f2..03beb77 100644
--- a/proxmox-installer-common/src/setup.rs
+++ b/proxmox-installer-common/src/setup.rs
@@ -12,7 +12,10 @@ use std::{
use serde::{de, Deserialize, Deserializer, Serialize, Serializer};
use crate::{
- options::{Disk, ZfsBootdiskOptions, ZfsChecksumOption, ZfsCompressOption},
+ options::{
+ BtrfsRaidLevel, Disk, FsType, ZfsBootdiskOptions, ZfsChecksumOption, ZfsCompressOption,
+ ZfsRaidLevel,
+ },
utils::CidrAddress,
};
@@ -387,3 +390,84 @@ pub fn spawn_low_level_installer(test_mode: bool) -> io::Result<process::Child>
.stdout(Stdio::piped())
.spawn()
}
+
+/// See Proxmox::Install::Config
+#[derive(Serialize)]
+pub struct InstallConfig {
+ pub autoreboot: usize,
+
+ #[serde(serialize_with = "serialize_fstype")]
+ pub filesys: FsType,
+ pub hdsize: f64,
+ #[serde(skip_serializing_if = "Option::is_none")]
+ pub swapsize: Option<f64>,
+ #[serde(skip_serializing_if = "Option::is_none")]
+ pub maxroot: Option<f64>,
+ #[serde(skip_serializing_if = "Option::is_none")]
+ pub minfree: Option<f64>,
+ #[serde(skip_serializing_if = "Option::is_none")]
+ pub maxvz: Option<f64>,
+
+ #[serde(skip_serializing_if = "Option::is_none")]
+ pub zfs_opts: Option<InstallZfsOption>,
+
+ #[serde(
+ serialize_with = "serialize_disk_opt",
+ skip_serializing_if = "Option::is_none"
+ )]
+ pub target_hd: Option<Disk>,
+ #[serde(skip_serializing_if = "HashMap::is_empty")]
+ pub disk_selection: HashMap<String, String>,
+
+ pub country: String,
+ pub timezone: String,
+ pub keymap: String,
+
+ pub password: String,
+ pub mailto: String,
+
+ pub mngmt_nic: String,
+
+ pub hostname: String,
+ pub domain: String,
+ #[serde(serialize_with = "serialize_as_display")]
+ pub cidr: CidrAddress,
+ pub gateway: IpAddr,
+ pub dns: IpAddr,
+}
+
+fn serialize_disk_opt<S>(value: &Option<Disk>, serializer: S) -> Result<S::Ok, S::Error>
+where
+ S: Serializer,
+{
+ if let Some(disk) = value {
+ serializer.serialize_str(&disk.path)
+ } else {
+ serializer.serialize_none()
+ }
+}
+
+fn serialize_fstype<S>(value: &FsType, serializer: S) -> Result<S::Ok, S::Error>
+where
+ S: Serializer,
+{
+ use FsType::*;
+ let value = match value {
+ // proxinstall::$fssetup
+ Ext4 => "ext4",
+ Xfs => "xfs",
+ // proxinstall::get_zfs_raid_setup()
+ Zfs(ZfsRaidLevel::Raid0) => "zfs (RAID0)",
+ Zfs(ZfsRaidLevel::Raid1) => "zfs (RAID1)",
+ Zfs(ZfsRaidLevel::Raid10) => "zfs (RAID10)",
+ Zfs(ZfsRaidLevel::RaidZ) => "zfs (RAIDZ-1)",
+ Zfs(ZfsRaidLevel::RaidZ2) => "zfs (RAIDZ-2)",
+ Zfs(ZfsRaidLevel::RaidZ3) => "zfs (RAIDZ-3)",
+ // proxinstall::get_btrfs_raid_setup()
+ Btrfs(BtrfsRaidLevel::Raid0) => "btrfs (RAID0)",
+ Btrfs(BtrfsRaidLevel::Raid1) => "btrfs (RAID1)",
+ Btrfs(BtrfsRaidLevel::Raid10) => "btrfs (RAID10)",
+ };
+
+ serializer.collect_str(value)
+}
diff --git a/proxmox-tui-installer/src/setup.rs b/proxmox-tui-installer/src/setup.rs
index 79421d7..e816c12 100644
--- a/proxmox-tui-installer/src/setup.rs
+++ b/proxmox-tui-installer/src/setup.rs
@@ -1,59 +1,11 @@
-use std::{collections::HashMap, fmt, net::IpAddr};
-
-use serde::{Serialize, Serializer};
+use std::collections::HashMap;
use crate::options::InstallerOptions;
use proxmox_installer_common::{
- options::{AdvancedBootdiskOptions, BtrfsRaidLevel, Disk, FsType, ZfsRaidLevel},
- setup::InstallZfsOption,
- utils::CidrAddress,
+ options::AdvancedBootdiskOptions,
+ setup::InstallConfig,
};
-/// See Proxmox::Install::Config
-#[derive(Serialize)]
-pub struct InstallConfig {
- autoreboot: usize,
-
- #[serde(serialize_with = "serialize_fstype")]
- filesys: FsType,
- hdsize: f64,
- #[serde(skip_serializing_if = "Option::is_none")]
- swapsize: Option<f64>,
- #[serde(skip_serializing_if = "Option::is_none")]
- maxroot: Option<f64>,
- #[serde(skip_serializing_if = "Option::is_none")]
- minfree: Option<f64>,
- #[serde(skip_serializing_if = "Option::is_none")]
- maxvz: Option<f64>,
-
- #[serde(skip_serializing_if = "Option::is_none")]
- zfs_opts: Option<InstallZfsOption>,
-
- #[serde(
- serialize_with = "serialize_disk_opt",
- skip_serializing_if = "Option::is_none"
- )]
- target_hd: Option<Disk>,
- #[serde(skip_serializing_if = "HashMap::is_empty")]
- disk_selection: HashMap<String, String>,
-
- country: String,
- timezone: String,
- keymap: String,
-
- password: String,
- mailto: String,
-
- mngmt_nic: String,
-
- hostname: String,
- domain: String,
- #[serde(serialize_with = "serialize_as_display")]
- cidr: CidrAddress,
- gateway: IpAddr,
- dns: IpAddr,
-}
-
impl From<InstallerOptions> for InstallConfig {
fn from(options: InstallerOptions) -> Self {
let mut config = Self {
@@ -121,47 +73,3 @@ impl From<InstallerOptions> for InstallConfig {
config
}
}
-
-fn serialize_disk_opt<S>(value: &Option<Disk>, serializer: S) -> Result<S::Ok, S::Error>
-where
- S: Serializer,
-{
- if let Some(disk) = value {
- serializer.serialize_str(&disk.path)
- } else {
- serializer.serialize_none()
- }
-}
-
-fn serialize_fstype<S>(value: &FsType, serializer: S) -> Result<S::Ok, S::Error>
-where
- S: Serializer,
-{
- use FsType::*;
- let value = match value {
- // proxinstall::$fssetup
- Ext4 => "ext4",
- Xfs => "xfs",
- // proxinstall::get_zfs_raid_setup()
- Zfs(ZfsRaidLevel::Raid0) => "zfs (RAID0)",
- Zfs(ZfsRaidLevel::Raid1) => "zfs (RAID1)",
- Zfs(ZfsRaidLevel::Raid10) => "zfs (RAID10)",
- Zfs(ZfsRaidLevel::RaidZ) => "zfs (RAIDZ-1)",
- Zfs(ZfsRaidLevel::RaidZ2) => "zfs (RAIDZ-2)",
- Zfs(ZfsRaidLevel::RaidZ3) => "zfs (RAIDZ-3)",
- // proxinstall::get_btrfs_raid_setup()
- Btrfs(BtrfsRaidLevel::Raid0) => "btrfs (RAID0)",
- Btrfs(BtrfsRaidLevel::Raid1) => "btrfs (RAID1)",
- Btrfs(BtrfsRaidLevel::Raid10) => "btrfs (RAID10)",
- };
-
- serializer.collect_str(value)
-}
-
-fn serialize_as_display<S, T>(value: &T, serializer: S) -> Result<S::Ok, S::Error>
-where
- S: Serializer,
- T: fmt::Display,
-{
- serializer.collect_str(value)
-}
diff --git a/proxmox-tui-installer/src/views/install_progress.rs b/proxmox-tui-installer/src/views/install_progress.rs
index 4626fe4..409c31a 100644
--- a/proxmox-tui-installer/src/views/install_progress.rs
+++ b/proxmox-tui-installer/src/views/install_progress.rs
@@ -12,8 +12,8 @@ use std::{
time::Duration,
};
-use crate::{abort_install_button, prompt_dialog, setup::InstallConfig, InstallerState};
-use proxmox_installer_common::setup::spawn_low_level_installer;
+use crate::{abort_install_button, prompt_dialog, InstallerState};
+use proxmox_installer_common::setup::{InstallConfig, spawn_low_level_installer};
pub struct InstallProgressView {
view: PaddedView<LinearLayout>,
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 02/18] common: make InstallZfsOption members public
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 01/18] tui: common: move InstallConfig struct to common crate Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 03/18] common: tui: use BTreeMap for predictable ordering Aaron Lauterer
` (16 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
as they will be used directly by the auto installer
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-installer-common/src/setup.rs | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/proxmox-installer-common/src/setup.rs b/proxmox-installer-common/src/setup.rs
index 03beb77..1bc4cb7 100644
--- a/proxmox-installer-common/src/setup.rs
+++ b/proxmox-installer-common/src/setup.rs
@@ -147,13 +147,13 @@ pub fn installer_setup(in_test_mode: bool) -> Result<(SetupInfo, LocaleInfo, Run
#[derive(Serialize)]
pub struct InstallZfsOption {
- ashift: usize,
+ pub ashift: usize,
#[serde(serialize_with = "serialize_as_display")]
- compress: ZfsCompressOption,
+ pub compress: ZfsCompressOption,
#[serde(serialize_with = "serialize_as_display")]
- checksum: ZfsChecksumOption,
- copies: usize,
- arc_max: usize,
+ pub checksum: ZfsChecksumOption,
+ pub copies: usize,
+ pub arc_max: usize,
}
impl From<ZfsBootdiskOptions> for InstallZfsOption {
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 03/18] common: tui: use BTreeMap for predictable ordering
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 01/18] tui: common: move InstallConfig struct to common crate Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 02/18] common: make InstallZfsOption members public Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 04/18] Makefile: fix handling of multiple usr_bin files Aaron Lauterer
` (15 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
necessary for the disk selection and network interfaces maps to have
tests with results that can be compared without much additional effort.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-installer-common/src/setup.rs | 8 ++++----
proxmox-tui-installer/src/options.rs | 4 ++--
proxmox-tui-installer/src/setup.rs | 4 ++--
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/proxmox-installer-common/src/setup.rs b/proxmox-installer-common/src/setup.rs
index 1bc4cb7..8432a2c 100644
--- a/proxmox-installer-common/src/setup.rs
+++ b/proxmox-installer-common/src/setup.rs
@@ -1,6 +1,6 @@
use std::{
cmp,
- collections::HashMap,
+ collections::{BTreeMap, HashMap},
fmt,
fs::File,
io::{self, BufReader},
@@ -297,7 +297,7 @@ pub struct NetworkInfo {
/// Maps devices to their configuration, if it has a usable configuration.
/// (Contains no entries for devices with only link-local addresses.)
#[serde(default)]
- pub interfaces: HashMap<String, Interface>,
+ pub interfaces: BTreeMap<String, Interface>,
/// The hostname of this machine, if set by the DHCP server.
pub hostname: Option<String>,
@@ -416,8 +416,8 @@ pub struct InstallConfig {
skip_serializing_if = "Option::is_none"
)]
pub target_hd: Option<Disk>,
- #[serde(skip_serializing_if = "HashMap::is_empty")]
- pub disk_selection: HashMap<String, String>,
+ #[serde(skip_serializing_if = "BTreeMap::is_empty")]
+ pub disk_selection: BTreeMap<String, String>,
pub country: String,
pub timezone: String,
diff --git a/proxmox-tui-installer/src/options.rs b/proxmox-tui-installer/src/options.rs
index 094a430..73fbf2a 100644
--- a/proxmox-tui-installer/src/options.rs
+++ b/proxmox-tui-installer/src/options.rs
@@ -76,7 +76,7 @@ mod tests {
utils::{CidrAddress, Fqdn},
};
use std::net::{IpAddr, Ipv4Addr};
- use std::{collections::HashMap, path::PathBuf};
+ use std::{collections::BTreeMap, path::PathBuf};
fn dummy_setup_info() -> SetupInfo {
SetupInfo {
@@ -99,7 +99,7 @@ mod tests {
fn network_options_from_setup_network_info() {
let setup = dummy_setup_info();
- let mut interfaces = HashMap::new();
+ let mut interfaces = BTreeMap::new();
interfaces.insert(
"eth0".to_owned(),
Interface {
diff --git a/proxmox-tui-installer/src/setup.rs b/proxmox-tui-installer/src/setup.rs
index e816c12..248f86e 100644
--- a/proxmox-tui-installer/src/setup.rs
+++ b/proxmox-tui-installer/src/setup.rs
@@ -1,4 +1,4 @@
-use std::collections::HashMap;
+use std::collections::BTreeMap;
use crate::options::InstallerOptions;
use proxmox_installer_common::{
@@ -19,7 +19,7 @@ impl From<InstallerOptions> for InstallConfig {
maxvz: None,
zfs_opts: None,
target_hd: None,
- disk_selection: HashMap::new(),
+ disk_selection: BTreeMap::new(),
country: options.timezone.country,
timezone: options.timezone.timezone,
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 04/18] Makefile: fix handling of multiple usr_bin files
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (2 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 03/18] common: tui: use BTreeMap for predictable ordering Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-02-06 14:28 ` [pve-devel] applied: " Thomas Lamprecht
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 05/18] low-level: add dump-udev command Aaron Lauterer
` (14 subsequent siblings)
18 siblings, 1 reply; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Otherwise the build will fail once we define more than one USR_BIN
file.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
index 601c836..f0c361b 100644
--- a/Makefile
+++ b/Makefile
@@ -104,7 +104,7 @@ install: $(INSTALLER_SOURCES) $(CARGO_COMPILEDIR)/proxmox-tui-installer
install -D -m 755 unconfigured.sh $(DESTDIR)/sbin/unconfigured.sh
install -D -m 755 proxinstall $(DESTDIR)/usr/bin/proxinstall
install -D -m 755 proxmox-low-level-installer $(DESTDIR)/$(BINDIR)/proxmox-low-level-installer
- $(foreach i,$(USR_BIN), install -m755 $(CARGO_COMPILEDIR)/$(i) $(DESTDIR)$(BINDIR)/)
+ $(foreach i,$(USR_BIN), install -m755 $(CARGO_COMPILEDIR)/$(i) $(DESTDIR)$(BINDIR)/ ;)
install -D -m 755 checktime $(DESTDIR)/usr/bin/checktime
install -D -m 644 xinitrc $(DESTDIR)/.xinitrc
install -D -m 755 spice-vdagent.sh $(DESTDIR)/.spice-vdagent.sh
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 05/18] low-level: add dump-udev command
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (3 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 04/18] Makefile: fix handling of multiple usr_bin files Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 06/18] add auto-installer crate Aaron Lauterer
` (13 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Fetches UDEV device properties prepended with 'E:' for NICs and disks.
The result is stored in its own JSON file.
This information is needed to filter for specific devices. Mainly for
the auto-installer for now.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
Proxmox/Makefile | 1 +
Proxmox/Sys/Udev.pm | 54 +++++++++++++++++++++++++++++++++++++
proxmox-low-level-installer | 13 +++++++++
3 files changed, 68 insertions(+)
create mode 100644 Proxmox/Sys/Udev.pm
diff --git a/Proxmox/Makefile b/Proxmox/Makefile
index d49da80..9561d9b 100644
--- a/Proxmox/Makefile
+++ b/Proxmox/Makefile
@@ -16,6 +16,7 @@ PERL_MODULES=\
Sys/Command.pm \
Sys/File.pm \
Sys/Net.pm \
+ Sys/Udev.pm \
UI.pm \
UI/Base.pm \
UI/Gtk3.pm \
diff --git a/Proxmox/Sys/Udev.pm b/Proxmox/Sys/Udev.pm
new file mode 100644
index 0000000..69d674f
--- /dev/null
+++ b/Proxmox/Sys/Udev.pm
@@ -0,0 +1,54 @@
+package Proxmox::Sys::Udev;
+
+use strict;
+use warnings;
+
+use base qw(Exporter);
+our @EXPORT_OK = qw(disk_details);
+
+my $udev_regex = '^E: ([A-Z_]*)=(.*)$';
+
+my sub fetch_udevadm_info {
+ my ($path) = @_;
+
+ my $info = `udevadm info --path $path --query all`;
+ if (!$info) {
+ warn "no details found for device '${path}'\n";
+ next;
+ }
+ my $details = {};
+ for my $line (split('\n', $info)) {
+ if ($line =~ m/$udev_regex/) {
+ $details->{$1} = $2;
+ }
+ }
+ return $details;
+}
+
+# return hash of E: properties returned by udevadm
+sub disk_details {
+ my $result = {};
+ for my $data (@{Proxmox::Sys::Block::get_cached_disks()}) {
+ my $index = @$data[0];
+ my $bd = @$data[5];
+ $result->{$index} = fetch_udevadm_info($bd);
+ }
+ return $result;
+}
+
+
+sub nic_details {
+ my $nic_path = "/sys/class/net";
+ my $result = {};
+
+ my $nics = Proxmox::Sys::Net::get_ip_config()->{ifaces};
+
+ for my $index (keys %$nics) {
+ my $name = $nics->{$index}->{name};
+ my $nic = "${nic_path}/${name}";
+ $result->{$name} = fetch_udevadm_info($nic);
+ }
+ return $result;
+}
+
+1;
diff --git a/proxmox-low-level-installer b/proxmox-low-level-installer
index d127a40..531251d 100755
--- a/proxmox-low-level-installer
+++ b/proxmox-low-level-installer
@@ -21,6 +21,7 @@ use Time::HiRes qw(usleep);
use Proxmox::Install::ISOEnv;
use Proxmox::Install::RunEnv;
+use Proxmox::Sys::Udev;
use Proxmox::Sys::File qw(file_write_all);
@@ -31,6 +32,7 @@ use Proxmox::UI;
my $commands = {
'dump-env' => 'Dump the current ISO and Hardware environment to base the installer UI on.',
+ 'dump-udev' => 'Dump disk and network device info. Used for the auto installation.',
'start-session' => 'Start an installation session, with command and result transmitted via stdin/out',
'start-session-test' => 'Start an installation TEST session, with command and result transmitted via stdin/out',
'help' => 'Output this usage help.',
@@ -114,6 +116,17 @@ if ($cmd eq 'dump-env') {
my $run_env = Proxmox::Install::RunEnv::query_installation_environment();
my $run_env_serialized = to_json($run_env, {canonical => 1, utf8 => 1}) ."\n";
file_write_all($run_env_file, $run_env_serialized);
+} elsif ($cmd eq 'dump-udev') {
+ my $out_dir = $env->{locations}->{run};
+ make_path($out_dir);
+ die "failed to create output directory '$out_dir'\n" if !-d $out_dir;
+
+ my $output = {};
+ $output->{disks} = Proxmox::Sys::Udev::disk_details();
+ $output->{nics} = Proxmox::Sys::Udev::nic_details();
+
+ my $output_serialized = to_json($output, {canonical => 1, utf8 => 1}) ."\n";
+ file_write_all("$out_dir/run-env-udev.json", $output_serialized);
} elsif ($cmd eq 'start-session') {
Proxmox::UI::init_stdio({}, $env);
read_and_merge_config();
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 06/18] add auto-installer crate
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (4 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 05/18] low-level: add dump-udev command Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 07/18] auto-installer: add dependencies Aaron Lauterer
` (12 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
Cargo.toml | 1 +
Makefile | 1 +
proxmox-auto-installer/Cargo.toml | 10 ++++++++++
proxmox-auto-installer/src/lib.rs | 0
4 files changed, 12 insertions(+)
create mode 100644 proxmox-auto-installer/Cargo.toml
create mode 100644 proxmox-auto-installer/src/lib.rs
diff --git a/Cargo.toml b/Cargo.toml
index c1bd578..7017ac5 100644
--- a/Cargo.toml
+++ b/Cargo.toml
@@ -1,5 +1,6 @@
[workspace]
members = [
+ "proxmox-auto-installer",
"proxmox-installer-common",
"proxmox-tui-installer",
]
diff --git a/Makefile b/Makefile
index f0c361b..57bd7ae 100644
--- a/Makefile
+++ b/Makefile
@@ -42,6 +42,7 @@ $(BUILDDIR):
policy-disable-rc.d \
proxinstall \
proxmox-low-level-installer \
+ proxmox-auto-installer/ \
proxmox-tui-installer/ \
proxmox-installer-common/ \
spice-vdagent.sh \
diff --git a/proxmox-auto-installer/Cargo.toml b/proxmox-auto-installer/Cargo.toml
new file mode 100644
index 0000000..75cfb2c
--- /dev/null
+++ b/proxmox-auto-installer/Cargo.toml
@@ -0,0 +1,10 @@
+[package]
+name = "proxmox-auto-installer"
+version = "0.1.0"
+edition = "2021"
+authors = [ "Aaron Lauterer <a.lauterer@proxmox.com>" ]
+license = "AGPL-3"
+exclude = [ "build", "debian" ]
+homepage = "https://www.proxmox.com"
+
+[dependencies]
diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
new file mode 100644
index 0000000..e69de29
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 07/18] auto-installer: add dependencies
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (5 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 06/18] add auto-installer crate Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-31 13:52 ` Christoph Heiss
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition Aaron Lauterer
` (11 subsequent siblings)
18 siblings, 1 reply; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/Cargo.toml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/proxmox-auto-installer/Cargo.toml b/proxmox-auto-installer/Cargo.toml
index 75cfb2c..211c605 100644
--- a/proxmox-auto-installer/Cargo.toml
+++ b/proxmox-auto-installer/Cargo.toml
@@ -8,3 +8,7 @@ exclude = [ "build", "debian" ]
homepage = "https://www.proxmox.com"
[dependencies]
+proxmox-installer-common = { path = "../proxmox-installer-common" }
+serde = { version = "1.0", features = ["derive"] }
+serde_json = "1.0"
+toml = "0.5.11"
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (6 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 07/18] auto-installer: add dependencies Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-31 13:50 ` Christoph Heiss
2024-02-23 14:27 ` Stefan Lendl
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 09/18] auto-installer: add struct to hold udev info Aaron Lauterer
` (10 subsequent siblings)
18 siblings, 2 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/src/answer.rs | 147 +++++++++++++++++++++++++++
proxmox-auto-installer/src/lib.rs | 1 +
2 files changed, 148 insertions(+)
create mode 100644 proxmox-auto-installer/src/answer.rs
diff --git a/proxmox-auto-installer/src/answer.rs b/proxmox-auto-installer/src/answer.rs
new file mode 100644
index 0000000..0f6c593
--- /dev/null
+++ b/proxmox-auto-installer/src/answer.rs
@@ -0,0 +1,147 @@
+use serde::{Deserialize, Serialize};
+use std::collections::BTreeMap;
+
+#[derive(Clone, Deserialize, Debug)]
+#[serde(rename_all = "lowercase")]
+pub struct Answer {
+ pub global: Global,
+ pub network: Network,
+ pub disks: Disks,
+}
+
+#[derive(Clone, Deserialize, Debug)]
+pub struct Global {
+ pub country: String,
+ pub fqdn: String,
+ pub keyboard: String,
+ pub mailto: String,
+ pub timezone: String,
+ pub password: String,
+ pub pre_command: Option<Vec<String>>,
+ pub post_command: Option<Vec<String>>,
+ pub reboot_on_error: Option<bool>,
+}
+
+#[derive(Clone, Deserialize, Debug)]
+pub struct Network {
+ pub use_dhcp: Option<bool>,
+ pub cidr: Option<String>,
+ pub dns: Option<String>,
+ pub gateway: Option<String>,
+ // use BTreeMap to have keys sorted
+ pub filter: Option<BTreeMap<String, String>>,
+}
+
+#[derive(Clone, Deserialize, Debug)]
+pub struct Disks {
+ pub filesystem: Option<Filesystem>,
+ pub disk_selection: Option<Vec<String>>,
+ pub filter_match: Option<FilterMatch>,
+ // use BTreeMap to have keys sorted
+ pub filter: Option<BTreeMap<String, String>>,
+ pub zfs: Option<ZfsOptions>,
+ pub lvm: Option<LvmOptions>,
+ pub btrfs: Option<BtrfsOptions>,
+}
+
+#[derive(Clone, Deserialize, Debug, PartialEq)]
+#[serde(rename_all = "lowercase")]
+pub enum FilterMatch {
+ Any,
+ All,
+}
+
+#[derive(Clone, Deserialize, Serialize, Debug)]
+#[serde(rename_all = "kebab-case")]
+pub enum Filesystem {
+ Ext4,
+ Xfs,
+ ZfsRaid0,
+ ZfsRaid1,
+ ZfsRaid10,
+ ZfsRaidZ1,
+ ZfsRaidZ2,
+ ZfsRaidZ3,
+ BtrfsRaid0,
+ BtrfsRaid1,
+ BtrfsRaid10,
+}
+
+#[derive(Clone, Deserialize, Debug)]
+pub struct ZfsOptions {
+ pub ashift: Option<usize>,
+ pub arc_max: Option<usize>,
+ pub checksum: Option<ZfsChecksumOption>,
+ pub compress: Option<ZfsCompressOption>,
+ pub copies: Option<usize>,
+ pub hdsize: Option<f64>,
+}
+
+impl ZfsOptions {
+ pub fn new() -> ZfsOptions {
+ ZfsOptions {
+ ashift: None,
+ arc_max: None,
+ checksum: None,
+ compress: None,
+ copies: None,
+ hdsize: None,
+ }
+ }
+}
+
+#[derive(Copy, Clone, Debug, Default, Eq, PartialEq, Deserialize)]
+#[serde(rename_all(deserialize = "lowercase"))]
+pub enum ZfsCompressOption {
+ #[default]
+ On,
+ Off,
+ Lzjb,
+ Lz4,
+ Zle,
+ Gzip,
+ Zstd,
+}
+
+#[derive(Copy, Clone, Debug, Default, Eq, PartialEq, Deserialize)]
+#[serde(rename_all = "kebab-case")]
+pub enum ZfsChecksumOption {
+ #[default]
+ On,
+ Off,
+ Fletcher2,
+ Fletcher4,
+ Sha256,
+}
+
+#[derive(Clone, Deserialize, Serialize, Debug)]
+pub struct LvmOptions {
+ pub hdsize: Option<f64>,
+ pub swapsize: Option<f64>,
+ pub maxroot: Option<f64>,
+ pub maxvz: Option<f64>,
+ pub minfree: Option<f64>,
+}
+
+impl LvmOptions {
+ pub fn new() -> LvmOptions {
+ LvmOptions {
+ hdsize: None,
+ swapsize: None,
+ maxroot: None,
+ maxvz: None,
+ minfree: None,
+ }
+ }
+}
+
+#[derive(Clone, Deserialize, Serialize, Debug)]
+pub struct BtrfsOptions {
+ pub hdsize: Option<f64>,
+}
+
+impl BtrfsOptions {
+ pub fn new() -> BtrfsOptions {
+ BtrfsOptions { hdsize: None }
+ }
+}
diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
index e69de29..7813b98 100644
--- a/proxmox-auto-installer/src/lib.rs
+++ b/proxmox-auto-installer/src/lib.rs
@@ -0,0 +1 @@
+pub mod answer;
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 09/18] auto-installer: add struct to hold udev info
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (7 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 10/18] auto-installer: add utils Aaron Lauterer
` (9 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/src/lib.rs | 1 +
proxmox-auto-installer/src/udevinfo.rs | 9 +++++++++
2 files changed, 10 insertions(+)
create mode 100644 proxmox-auto-installer/src/udevinfo.rs
diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
index 7813b98..8cda416 100644
--- a/proxmox-auto-installer/src/lib.rs
+++ b/proxmox-auto-installer/src/lib.rs
@@ -1 +1,2 @@
pub mod answer;
+pub mod udevinfo;
diff --git a/proxmox-auto-installer/src/udevinfo.rs b/proxmox-auto-installer/src/udevinfo.rs
new file mode 100644
index 0000000..a6b61b5
--- /dev/null
+++ b/proxmox-auto-installer/src/udevinfo.rs
@@ -0,0 +1,9 @@
+use serde::Deserialize;
+use std::collections::BTreeMap;
+
+#[derive(Clone, Deserialize, Debug)]
+pub struct UdevInfo {
+ // use BTreeMap to have keys sorted
+ pub disks: BTreeMap<String, BTreeMap<String, String>>,
+ pub nics: BTreeMap<String, BTreeMap<String, String>>,
+}
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 10/18] auto-installer: add utils
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (8 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 09/18] auto-installer: add struct to hold udev info Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 11/18] auto-installer: add simple logging Aaron Lauterer
` (8 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
contains several utility structs and functions.
For example: a simple pattern matcher that matches wildcards at the
beginning or end of the filter.
It currently uses a dedicated function (parse_answer) to generate the
InstallConfig struct instead of a From implementation. This is because
for now the source data is spread over several other structs in
comparison to one in the TUI installer.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/src/lib.rs | 1 +
proxmox-auto-installer/src/utils.rs | 473 ++++++++++++++++++++++++++++
2 files changed, 474 insertions(+)
create mode 100644 proxmox-auto-installer/src/utils.rs
diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
index 8cda416..72884c1 100644
--- a/proxmox-auto-installer/src/lib.rs
+++ b/proxmox-auto-installer/src/lib.rs
@@ -1,2 +1,3 @@
pub mod answer;
pub mod udevinfo;
+pub mod utils;
diff --git a/proxmox-auto-installer/src/utils.rs b/proxmox-auto-installer/src/utils.rs
new file mode 100644
index 0000000..6e650c5
--- /dev/null
+++ b/proxmox-auto-installer/src/utils.rs
@@ -0,0 +1,473 @@
+use anyhow::{anyhow, bail, Context, Result};
+use log::info;
+use std::{
+ collections::BTreeMap,
+ net::IpAddr,
+ process::{Command, Stdio},
+ str::FromStr,
+};
+
+use crate::{
+ answer,
+ answer::{Answer, FilterMatch},
+ udevinfo::UdevInfo,
+};
+use proxmox_installer_common::{
+ options::{
+ BtrfsRaidLevel, FsType, NetworkOptions, ZfsChecksumOption, ZfsCompressOption, ZfsRaidLevel,
+ },
+ setup::{InstallConfig, InstallZfsOption, LocaleInfo, RuntimeInfo, SetupInfo},
+ utils::{CidrAddress, Fqdn},
+};
+use serde::Deserialize;
+
+/// Supports the globbing character '*' at the beginning, end or both of the pattern.
+/// Globbing within the pattern is not supported
+fn find_with_glob(pattern: &str, value: &str) -> bool {
+ let globbing_symbol = '*';
+ let mut start_glob = false;
+ let mut end_glob = false;
+ let mut pattern = pattern;
+
+ if pattern.starts_with(globbing_symbol) {
+ start_glob = true;
+ pattern = &pattern[1..];
+ }
+
+ if pattern.ends_with(globbing_symbol) {
+ end_glob = true;
+ pattern = &pattern[..pattern.len() - 1]
+ }
+
+ match (start_glob, end_glob) {
+ (true, true) => value.contains(pattern),
+ (true, false) => value.ends_with(pattern),
+ (false, true) => value.starts_with(pattern),
+ _ => value == pattern,
+ }
+}
+
+pub fn get_network_settings(
+ answer: &Answer,
+ udev_info: &UdevInfo,
+ runtime_info: &RuntimeInfo,
+ setup_info: &SetupInfo,
+) -> Result<NetworkOptions> {
+ let mut network_options = NetworkOptions::defaults_from(setup_info, &runtime_info.network);
+
+ info!("Setting network configuration");
+
+ // Always use the FQDN from the answer file
+ network_options.fqdn = Fqdn::from(answer.global.fqdn.as_str())
+ .map_err(|err| anyhow!("Error parsing FQDN: {err}"))?;
+
+ if answer.network.use_dhcp.is_none() || !answer.network.use_dhcp.unwrap() {
+ network_options.address = CidrAddress::from_str(
+ answer
+ .network
+ .cidr
+ .clone()
+ .context("No CIDR defined")?
+ .as_str(),
+ )
+ .map_err(|_| anyhow!("Error parsing CIDR"))?;
+ network_options.dns_server = IpAddr::from_str(
+ answer
+ .network
+ .dns
+ .clone()
+ .context("No DNS server defined")?
+ .as_str(),
+ )
+ .map_err(|_| anyhow!("Error parsing DNS server"))?;
+ network_options.gateway = IpAddr::from_str(
+ answer
+ .network
+ .gateway
+ .clone()
+ .expect("No gateway defined")
+ .as_str(),
+ )
+ .map_err(|_| anyhow!("Error parsing gateway"))?;
+ network_options.ifname =
+ get_single_udev_index(answer.network.filter.clone().unwrap(), &udev_info.nics)?
+ }
+
+ Ok(network_options)
+}
+
+fn get_single_udev_index(
+ filter: BTreeMap<String, String>,
+ udev_list: &BTreeMap<String, BTreeMap<String, String>>,
+) -> Result<String> {
+ if filter.is_empty() {
+ bail!("no filter defined");
+ }
+ let mut dev_index: Option<String> = None;
+ 'outer: for (dev, dev_values) in udev_list {
+ for (filter_key, filter_value) in &filter {
+ for (udev_key, udev_value) in dev_values {
+ if udev_key == filter_key && find_with_glob(filter_value, udev_value) {
+ dev_index = Some(dev.clone());
+ break 'outer; // take first match
+ }
+ }
+ }
+ }
+ if dev_index.is_none() {
+ bail!("filter did not match any device");
+ }
+
+ Ok(dev_index.unwrap())
+}
+
+fn get_matched_udev_indexes(
+ filter: BTreeMap<String, String>,
+ udev_list: &BTreeMap<String, BTreeMap<String, String>>,
+ match_all: bool,
+) -> Result<Vec<String>> {
+ let mut matches = vec![];
+ for (dev, dev_values) in udev_list {
+ let mut did_match_once = false;
+ let mut did_match_all = true;
+ for (filter_key, filter_value) in &filter {
+ for (udev_key, udev_value) in dev_values {
+ if udev_key == filter_key && find_with_glob(filter_value, udev_value) {
+ did_match_once = true;
+ } else if udev_key == filter_key {
+ did_match_all = false;
+ }
+ }
+ }
+ if (match_all && did_match_all) || (!match_all && did_match_once) {
+ matches.push(dev.clone());
+ }
+ }
+ if matches.is_empty() {
+ bail!("filter did not match any devices");
+ }
+ matches.sort();
+ Ok(matches)
+}
+
+pub fn set_disks(
+ answer: &Answer,
+ udev_info: &UdevInfo,
+ runtime_info: &RuntimeInfo,
+ config: &mut InstallConfig,
+) -> Result<()> {
+ match config.filesys {
+ FsType::Ext4 | FsType::Xfs => set_single_disk(answer, udev_info, runtime_info, config),
+ FsType::Zfs(_) | FsType::Btrfs(_) => {
+ set_selected_disks(answer, udev_info, runtime_info, config)
+ }
+ }
+}
+
+fn set_single_disk(
+ answer: &Answer,
+ udev_info: &UdevInfo,
+ runtime_info: &RuntimeInfo,
+ config: &mut InstallConfig,
+) -> Result<()> {
+ match &answer.disks.disk_selection {
+ Some(selection) => {
+ let disk_name = selection[0].clone();
+ let disk = runtime_info
+ .disks
+ .iter()
+ .find(|item| item.path.ends_with(disk_name.as_str()));
+ match disk {
+ Some(disk) => config.target_hd = Some(disk.clone()),
+ None => bail!("disk in 'disk_selection' not found"),
+ }
+ }
+ None => {
+ let disk_index =
+ get_single_udev_index(answer.disks.filter.clone().unwrap(), &udev_info.disks)?;
+ let disk = runtime_info
+ .disks
+ .iter()
+ .find(|item| item.index == disk_index);
+ config.target_hd = disk.cloned();
+ }
+ }
+ Ok(())
+}
+
+fn set_selected_disks(
+ answer: &Answer,
+ udev_info: &UdevInfo,
+ runtime_info: &RuntimeInfo,
+ config: &mut InstallConfig,
+) -> Result<()> {
+ match &answer.disks.disk_selection {
+ Some(selection) => {
+ info!("Disk selection found");
+ for disk_name in selection {
+ let disk = runtime_info
+ .disks
+ .iter()
+ .find(|item| item.path.ends_with(disk_name.as_str()));
+ if let Some(disk) = disk {
+ config
+ .disk_selection
+ .insert(disk.index.clone(), disk.index.clone());
+ }
+ }
+ }
+ None => {
+ info!("No disk selection found, looking for disk filters");
+ let filter_match = answer
+ .disks
+ .filter_match
+ .clone()
+ .unwrap_or(FilterMatch::Any);
+ let disk_filters = answer
+ .disks
+ .filter
+ .clone()
+ .context("no disk filters defined")?;
+ let selected_disk_indexes = get_matched_udev_indexes(
+ disk_filters,
+ &udev_info.disks,
+ filter_match == FilterMatch::All,
+ )?;
+
+ for i in selected_disk_indexes.into_iter() {
+ let disk = runtime_info
+ .disks
+ .iter()
+ .find(|item| item.index == i)
+ .unwrap();
+ config
+ .disk_selection
+ .insert(disk.index.clone(), disk.index.clone());
+ }
+ }
+ }
+ if config.disk_selection.is_empty() {
+ bail!("No disks found matching selection.");
+ }
+ Ok(())
+}
+
+pub fn get_first_selected_disk(config: &InstallConfig) -> usize {
+ config
+ .disk_selection
+ .iter()
+ .next()
+ .expect("no disks found")
+ .0
+ .parse::<usize>()
+ .expect("could not parse key to usize")
+}
+
+pub fn verify_locale_settings(answer: &Answer, locales: &LocaleInfo) -> Result<()> {
+ info!("Verifying locale settings");
+ if !locales
+ .countries
+ .keys()
+ .any(|i| i == &answer.global.country)
+ {
+ bail!("country code '{}' is not valid", &answer.global.country);
+ }
+ if !locales.kmap.keys().any(|i| i == &answer.global.keyboard) {
+ bail!("keyboard layout '{}' is not valid", &answer.global.keyboard);
+ }
+ if !locales
+ .cczones
+ .iter()
+ .any(|(_, zones)| zones.contains(&answer.global.timezone))
+ {
+ bail!("timezone '{}' is not valid", &answer.global.timezone);
+ }
+ Ok(())
+}
+
+pub fn run_cmds(step: &str, cmd_vec: &Option<Vec<String>>) -> Result<()> {
+ if let Some(cmds) = cmd_vec {
+ if !cmds.is_empty() {
+ info!("Running {step}-Commands:");
+ run_cmd(cmds)?;
+ info!("{step}-Commands finished");
+ }
+ }
+ Ok(())
+}
+
+fn run_cmd(cmds: &Vec<String>) -> Result<()> {
+ for cmd in cmds {
+ info!("Command '{cmd}':");
+ let mut child = match Command::new("/bin/bash")
+ .arg("-c")
+ .arg(cmd.clone())
+ .stdout(Stdio::inherit())
+ .stderr(Stdio::inherit())
+ .spawn()
+ {
+ Ok(child) => child,
+ Err(err) => bail!("error running command {cmd}: {err}"),
+ };
+ if let Err(err) = child.wait() {
+ bail!("{err}");
+ }
+ }
+
+ Ok(())
+}
+
+pub fn parse_answer(
+ answer: &Answer,
+ udev_info: &UdevInfo,
+ runtime_info: &RuntimeInfo,
+ locales: &LocaleInfo,
+ setup_info: &SetupInfo,
+) -> Result<InstallConfig> {
+ info!("Parsing answer file");
+ info!("Setting File system");
+ let filesystem = match &answer.disks.filesystem {
+ Some(answer::Filesystem::Ext4) => FsType::Ext4,
+ Some(answer::Filesystem::Xfs) => FsType::Xfs,
+ Some(answer::Filesystem::ZfsRaid0) => FsType::Zfs(ZfsRaidLevel::Raid0),
+ Some(answer::Filesystem::ZfsRaid1) => FsType::Zfs(ZfsRaidLevel::Raid1),
+ Some(answer::Filesystem::ZfsRaid10) => FsType::Zfs(ZfsRaidLevel::Raid10),
+ Some(answer::Filesystem::ZfsRaidZ1) => FsType::Zfs(ZfsRaidLevel::RaidZ),
+ Some(answer::Filesystem::ZfsRaidZ2) => FsType::Zfs(ZfsRaidLevel::RaidZ2),
+ Some(answer::Filesystem::ZfsRaidZ3) => FsType::Zfs(ZfsRaidLevel::RaidZ3),
+ Some(answer::Filesystem::BtrfsRaid0) => FsType::Btrfs(BtrfsRaidLevel::Raid0),
+ Some(answer::Filesystem::BtrfsRaid1) => FsType::Btrfs(BtrfsRaidLevel::Raid1),
+ Some(answer::Filesystem::BtrfsRaid10) => FsType::Btrfs(BtrfsRaidLevel::Raid10),
+ None => FsType::Ext4,
+ };
+ info!("File system selected: {}", filesystem);
+
+ let network_settings = get_network_settings(answer, udev_info, runtime_info, setup_info)?;
+
+ verify_locale_settings(answer, locales)?;
+
+ let mut config = InstallConfig {
+ autoreboot: 1_usize,
+ filesys: filesystem,
+ hdsize: 0.,
+ swapsize: None,
+ maxroot: None,
+ minfree: None,
+ maxvz: None,
+ zfs_opts: None,
+ target_hd: None,
+ disk_selection: BTreeMap::new(),
+
+ country: answer.global.country.clone(),
+ timezone: answer.global.timezone.clone(),
+ keymap: answer.global.keyboard.clone(),
+
+ password: answer.global.password.clone(),
+ mailto: answer.global.mailto.clone(),
+
+ mngmt_nic: network_settings.ifname,
+
+ hostname: network_settings.fqdn.host().unwrap().to_string(),
+ domain: network_settings.fqdn.domain(),
+ cidr: network_settings.address,
+ gateway: network_settings.gateway,
+ dns: network_settings.dns_server,
+ };
+
+ set_disks(answer, udev_info, runtime_info, &mut config)?;
+ match &config.filesys {
+ FsType::Xfs | FsType::Ext4 => {
+ let lvm = match &answer.disks.lvm {
+ Some(lvm) => lvm.clone(),
+ None => answer::LvmOptions::new(),
+ };
+ config.hdsize = lvm.hdsize.unwrap_or(config.target_hd.clone().unwrap().size);
+ config.swapsize = lvm.swapsize;
+ config.maxroot = lvm.maxroot;
+ config.maxvz = lvm.maxvz;
+ config.minfree = lvm.minfree;
+ }
+ FsType::Zfs(_) => {
+ let zfs = match &answer.disks.zfs {
+ Some(zfs) => zfs.clone(),
+ None => answer::ZfsOptions::new(),
+ };
+ let first_selected_disk = get_first_selected_disk(&config);
+
+ config.hdsize = zfs
+ .hdsize
+ .unwrap_or(runtime_info.disks[first_selected_disk].size);
+ config.zfs_opts = Some(InstallZfsOption {
+ ashift: zfs.ashift.unwrap_or(12),
+ arc_max: zfs.arc_max.unwrap_or(2048),
+ compress: match zfs.compress {
+ Some(answer::ZfsCompressOption::On) => ZfsCompressOption::On,
+ Some(answer::ZfsCompressOption::Off) => ZfsCompressOption::Off,
+ Some(answer::ZfsCompressOption::Lzjb) => ZfsCompressOption::Lzjb,
+ Some(answer::ZfsCompressOption::Lz4) => ZfsCompressOption::Lz4,
+ Some(answer::ZfsCompressOption::Zle) => ZfsCompressOption::Zle,
+ Some(answer::ZfsCompressOption::Gzip) => ZfsCompressOption::Gzip,
+ Some(answer::ZfsCompressOption::Zstd) => ZfsCompressOption::Zstd,
+ None => ZfsCompressOption::On,
+ },
+ checksum: match zfs.checksum {
+ Some(answer::ZfsChecksumOption::On) => ZfsChecksumOption::On,
+ Some(answer::ZfsChecksumOption::Off) => ZfsChecksumOption::Off,
+ Some(answer::ZfsChecksumOption::Fletcher2) => ZfsChecksumOption::Fletcher2,
+ Some(answer::ZfsChecksumOption::Fletcher4) => ZfsChecksumOption::Fletcher4,
+ Some(answer::ZfsChecksumOption::Sha256) => ZfsChecksumOption::Sha256,
+ None => ZfsChecksumOption::On,
+ },
+ copies: zfs.copies.unwrap_or(1),
+ });
+ }
+ FsType::Btrfs(_) => {
+ let btrfs = match &answer.disks.btrfs {
+ Some(btrfs) => btrfs.clone(),
+ None => answer::BtrfsOptions::new(),
+ };
+ let first_selected_disk = get_first_selected_disk(&config);
+
+ config.hdsize = btrfs
+ .hdsize
+ .unwrap_or(runtime_info.disks[first_selected_disk].size);
+ }
+ }
+ Ok(config)
+}
+
+#[derive(Clone, Debug, Deserialize, PartialEq)]
+#[serde(tag = "type", rename_all = "lowercase")]
+pub enum LowLevelMessage {
+ #[serde(rename = "message")]
+ Info {
+ message: String,
+ },
+ Error {
+ message: String,
+ },
+ Prompt {
+ query: String,
+ },
+ Finished {
+ state: String,
+ message: String,
+ },
+ Progress {
+ ratio: f32,
+ text: String,
+ },
+}
+
+#[cfg(test)]
+mod tests {
+ use super::*;
+ #[test]
+ fn test_glob_patterns() {
+ let test_value = "foobar";
+ assert_eq!(find_with_glob("*bar", test_value), true);
+ assert_eq!(find_with_glob("foo*", test_value), true);
+ assert_eq!(find_with_glob("foobar", test_value), true);
+ assert_eq!(find_with_glob("oobar", test_value), false);
+ }
+}
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 11/18] auto-installer: add simple logging
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (9 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 10/18] auto-installer: add utils Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 12/18] auto-installer: add tests for answer file parsing Aaron Lauterer
` (7 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Log to stdout and the file the binary needs to set up.
This is a first variant. By using the log crate macros we can change
that in the future without too much effort.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/Cargo.toml | 2 ++
proxmox-auto-installer/src/lib.rs | 1 +
proxmox-auto-installer/src/log.rs | 38 +++++++++++++++++++++++++++++++
3 files changed, 41 insertions(+)
create mode 100644 proxmox-auto-installer/src/log.rs
diff --git a/proxmox-auto-installer/Cargo.toml b/proxmox-auto-installer/Cargo.toml
index 211c605..078a333 100644
--- a/proxmox-auto-installer/Cargo.toml
+++ b/proxmox-auto-installer/Cargo.toml
@@ -8,7 +8,9 @@ exclude = [ "build", "debian" ]
homepage = "https://www.proxmox.com"
[dependencies]
+anyhow = "1.0"
proxmox-installer-common = { path = "../proxmox-installer-common" }
serde = { version = "1.0", features = ["derive"] }
serde_json = "1.0"
toml = "0.5.11"
+log = "0.4.20"
diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
index 72884c1..6636cc7 100644
--- a/proxmox-auto-installer/src/lib.rs
+++ b/proxmox-auto-installer/src/lib.rs
@@ -1,3 +1,4 @@
pub mod answer;
+pub mod log;
pub mod udevinfo;
pub mod utils;
diff --git a/proxmox-auto-installer/src/log.rs b/proxmox-auto-installer/src/log.rs
new file mode 100644
index 0000000..d52912a
--- /dev/null
+++ b/proxmox-auto-installer/src/log.rs
@@ -0,0 +1,38 @@
+use anyhow::{bail, Result};
+use log::{Level, Metadata, Record};
+use std::{fs::File, io::Write, sync::Mutex, sync::OnceLock};
+
+pub struct AutoInstLogger;
+static LOGFILE: OnceLock<Mutex<File>> = OnceLock::new();
+
+impl AutoInstLogger {
+ pub fn init(path: &str) -> Result<()> {
+ let f = File::create(path)?;
+ if LOGFILE.set(Mutex::new(f)).is_err() {
+ bail!("Cannot set LOGFILE")
+ }
+ Ok(())
+ }
+}
+
+impl log::Log for AutoInstLogger {
+ fn enabled(&self, metadata: &Metadata) -> bool {
+ metadata.level() <= Level::Info
+ }
+
+ /// Logs to stdout without log level and into log file including log level
+ fn log(&self, record: &Record) {
+ if self.enabled(record.metadata()) {
+ println!("{}", record.args());
+ let mut file = LOGFILE
+ .get()
+ .expect("could not get LOGFILE")
+ .lock()
+ .expect("could not get mutex for LOGFILE");
+ file.write_all(format!("{} - {}\n", record.level(), record.args()).as_bytes())
+ .expect("could not write to LOGFILE");
+ }
+ }
+
+ fn flush(&self) {}
+}
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 12/18] auto-installer: add tests for answer file parsing
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (10 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 11/18] auto-installer: add simple logging Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 13/18] auto-installer: add auto-installer binary Aaron Lauterer
` (6 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
By matching the resulting json to be passed to the low level installer
against known good ones.
The environment info was gathered from one of our AMD Epyc Rome test
servers to have a realistic starting point.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/tests/parse-answer.rs | 102 ++++++++++++++++++
.../tests/resources/iso-info.json | 1 +
.../tests/resources/locales.json | 1 +
.../resources/parse_answer/disk_match.json | 29 +++++
.../resources/parse_answer/disk_match.toml | 14 +++
.../parse_answer/disk_match_all.json | 26 +++++
.../parse_answer/disk_match_all.toml | 16 +++
.../parse_answer/disk_match_any.json | 33 ++++++
.../parse_answer/disk_match_any.toml | 16 +++
.../tests/resources/parse_answer/minimal.json | 17 +++
.../tests/resources/parse_answer/minimal.toml | 14 +++
.../resources/parse_answer/nic_matching.json | 17 +++
.../resources/parse_answer/nic_matching.toml | 19 ++++
.../tests/resources/parse_answer/readme | 4 +
.../resources/parse_answer/specific_nic.json | 17 +++
.../resources/parse_answer/specific_nic.toml | 19 ++++
.../tests/resources/parse_answer/zfs.json | 27 +++++
.../tests/resources/parse_answer/zfs.toml | 19 ++++
.../tests/resources/run-env-info.json | 1 +
.../tests/resources/run-env-udev.json | 1 +
20 files changed, 393 insertions(+)
create mode 100644 proxmox-auto-installer/tests/parse-answer.rs
create mode 100644 proxmox-auto-installer/tests/resources/iso-info.json
create mode 100644 proxmox-auto-installer/tests/resources/locales.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/minimal.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/minimal.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/nic_matching.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/nic_matching.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/readme
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/specific_nic.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/specific_nic.toml
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/zfs.json
create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/zfs.toml
create mode 100644 proxmox-auto-installer/tests/resources/run-env-info.json
create mode 100644 proxmox-auto-installer/tests/resources/run-env-udev.json
diff --git a/proxmox-auto-installer/tests/parse-answer.rs b/proxmox-auto-installer/tests/parse-answer.rs
new file mode 100644
index 0000000..7dabe55
--- /dev/null
+++ b/proxmox-auto-installer/tests/parse-answer.rs
@@ -0,0 +1,102 @@
+use std::path::PathBuf;
+
+use serde_json::Value;
+use std::fs;
+
+use proxmox_auto_installer::answer;
+use proxmox_auto_installer::answer::Answer;
+use proxmox_auto_installer::udevinfo::UdevInfo;
+use proxmox_auto_installer::utils::parse_answer;
+
+use proxmox_installer_common::setup::{
+ read_json, RuntimeInfo, LocaleInfo, SetupInfo,
+};
+
+fn get_test_resource_path() -> Result<PathBuf, String> {
+ Ok(std::env::current_dir()
+ .expect("current dir failed")
+ .join("tests/resources"))
+}
+fn get_answer(path: PathBuf) -> Result<Answer, String> {
+ let answer_raw = std::fs::read_to_string(&path).unwrap();
+ let answer: answer::Answer = toml::from_str(&answer_raw)
+ .map_err(|err| format!("error parsing answer.toml: {err}"))
+ .unwrap();
+
+ Ok(answer)
+}
+
+fn setup_test_basic(path: &PathBuf) -> (SetupInfo, LocaleInfo, RuntimeInfo, UdevInfo) {
+ let installer_info: SetupInfo = {
+ let mut path = path.clone();
+ path.push("iso-info.json");
+
+ read_json(&path).map_err(|err| format!("Failed to retrieve setup info: {err}")).unwrap()
+ };
+
+ let locale_info = {
+ let mut path = path.clone();
+ path.push("locales.json");
+
+ read_json(&path).map_err(|err| format!("Failed to retrieve locale info: {err}")).unwrap()
+ };
+
+ let mut runtime_info: RuntimeInfo = {
+ let mut path = path.clone();
+ path.push("run-env-info.json");
+
+ read_json(&path)
+ .map_err(|err| format!("Failed to retrieve runtime environment info: {err}")).unwrap()
+ };
+
+ let udev_info: UdevInfo = {
+ let mut path = path.clone();
+ path.push("run-env-udev.json");
+
+ read_json(&path)
+ .map_err(|err| format!("Failed to retrieve udev info details: {err}"))
+ .unwrap()
+ };
+ runtime_info.disks.sort();
+ if runtime_info.disks.is_empty() {
+ panic!("disk list is empty!");
+ }
+ (installer_info, locale_info, runtime_info, udev_info)
+}
+
+#[test]
+fn test_parse_answers() {
+ let path = get_test_resource_path().unwrap();
+ let (setup_info, locales, runtime_info, udev_info) = setup_test_basic(&path);
+ let mut tests_path = path.clone();
+ tests_path.push("parse_answer");
+ let test_dir = fs::read_dir(tests_path.clone()).unwrap();
+
+ for file_entry in test_dir {
+ let file = file_entry.unwrap();
+ if !file.file_type().unwrap().is_file() || file.file_name() == "readme" {
+ continue;
+ }
+ let p = file.path();
+ let name = p.file_stem().unwrap().to_str().unwrap();
+ let extension = p.extension().unwrap().to_str().unwrap();
+ if extension == "toml" {
+ println!("Test: {name}");
+ let answer = get_answer(p.clone()).unwrap();
+ let config = &parse_answer(&answer, &udev_info, &runtime_info, &locales, &setup_info).unwrap();
+ println!("Selected disks: {:#?}", &config.disk_selection);
+ let config_json = serde_json::to_string(config);
+ let config: Value = serde_json::from_str(config_json.unwrap().as_str()).unwrap();
+ let mut path = tests_path.clone();
+ path.push(format!("{name}.json"));
+ let compare_raw = std::fs::read_to_string(&path).unwrap();
+ let compare: Value = serde_json::from_str(&compare_raw).unwrap();
+ if config != compare {
+ panic!(
+ "Test {} failed:\nleft: {:#?}\nright: {:#?}\n",
+ name, config, compare
+ );
+ }
+ }
+ }
+}
diff --git a/proxmox-auto-installer/tests/resources/iso-info.json b/proxmox-auto-installer/tests/resources/iso-info.json
new file mode 100644
index 0000000..33cb79b
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/iso-info.json
@@ -0,0 +1 @@
+{"iso-info":{"isoname":"proxmox-ve","isorelease":"2","product":"pve","productlong":"Proxmox VE","release":"8.0"},"locations":{"iso":"/cdrom","lib":"/var/lib/proxmox-installer","pkg":"/cdrom/proxmox/packages/","run":"/run/proxmox-installer"},"product":"pve","product-cfg":{"bridged_network":1,"enable_btrfs":1,"fullname":"Proxmox VE","port":"8006","product":"pve"},"run-env-cache-file":"/run/proxmox-installer/run-env-info.json"}
diff --git a/proxmox-auto-installer/tests/resources/locales.json b/proxmox-auto-installer/tests/resources/locales.json
new file mode 100644
index 0000000..220a18c
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/locales.json
@@ -0,0 +1 @@
+{"cczones":{"ad":{"Europe/Andorra":1},"ae":{"Asia/Dubai":1},"af":{"Asia/Kabul":1},"ag":{"America/Antigua":1},"ai":{"America/Anguilla":1},"al":{"Europe/Tirane":1},"am":{"Asia/Yerevan":1},"ao":{"Africa/Luanda":1},"aq":{"Antarctica/Casey":1,"Antarctica/Davis":1,"Antarctica/DumontDUrville":1,"Antarctica/Mawson":1,"Antarctica/McMurdo":1,"Antarctica/Palmer":1,"Antarctica/Rothera":1,"Antarctica/Syowa":1,"Antarctica/Troll":1,"Antarctica/Vostok":1},"ar":{"America/Argentina/Buenos_Aires":1,"America/Argentina/Catamarca":1,"America/Argentina/Cordoba":1,"America/Argentina/Jujuy":1,"America/Argentina/La_Rioja":1,"America/Argentina/Mendoza":1,"America/Argentina/Rio_Gallegos":1,"America/Argentina/Salta":1,"America/Argentina/San_Juan":1,"America/Argentina/San_Luis":1,"America/Argentina/Tucuman":1,"America/Argentina/Ushuaia":1},"as":{"Pacific/Pago_Pago":1},"at":{"Europe/Vienna":1},"au":{"Antarctica/Macquarie":1,"Australia/Adelaide":1,"Australia/Brisbane":1,"Australia/Broken_Hill":1,"Australia/Darwin":1,"Australia/Eucla":1,"Australia/Hobart":1,"Australia/Lindeman":1,"Australia/Lord_Howe":1,"Australia/Melbourne":1,"Australia/Perth":1,"Australia/Sydney":1},"aw":{"America/Aruba":1},"ax":{"Europe/Mariehamn":1},"az":{"Asia/Baku":1},"ba":{"Europe/Sarajevo":1},"bb":{"America/Barbados":1},"bd":{"Asia/Dhaka":1},"be":{"Europe/Brussels":1},"bf":{"Africa/Ouagadougou":1},"bg":{"Europe/Sofia":1},"bh":{"Asia/Bahrain":1},"bi":{"Africa/Bujumbura":1},"bj":{"Africa/Porto-Novo":1},"bl":{"America/St_Barthelemy":1},"bm":{"Atlantic/Bermuda":1},"bn":{"Asia/Brunei":1},"bo":{"America/La_Paz":1},"bq":{"America/Kralendijk":1},"br":{"America/Araguaina":1,"America/Bahia":1,"America/Belem":1,"America/Boa_Vista":1,"America/Campo_Grande":1,"America/Cuiaba":1,"America/Eirunepe":1,"America/Fortaleza":1,"America/Maceio":1,"America/Manaus":1,"America/Noronha":1,"America/Porto_Velho":1,"America/Recife":1,"America/Rio_Branco":1,"America/Santarem":1,"America/Sao_Paulo":1},"bs":{"America/Nassau":1},"bt":{"Asia/Thimphu":1},"bw":{"Africa/Gaborone":1},"by":{"Europe/Minsk":1},"bz":{"America/Belize":1},"ca":{"America/Atikokan":1,"America/Blanc-Sablon":1,"America/Cambridge_Bay":1,"America/Creston":1,"America/Dawson":1,"America/Dawson_Creek":1,"America/Edmonton":1,"America/Fort_Nelson":1,"America/Glace_Bay":1,"America/Goose_Bay":1,"America/Halifax":1,"America/Inuvik":1,"America/Iqaluit":1,"America/Moncton":1,"America/Rankin_Inlet":1,"America/Regina":1,"America/Resolute":1,"America/St_Johns":1,"America/Swift_Current":1,"America/Toronto":1,"America/Vancouver":1,"America/Whitehorse":1,"America/Winnipeg":1},"cc":{"Indian/Cocos":1},"cd":{"Africa/Kinshasa":1,"Africa/Lubumbashi":1},"cf":{"Africa/Bangui":1},"cg":{"Africa/Brazzaville":1},"ch":{"Europe/Zurich":1},"ci":{"Africa/Abidjan":1},"ck":{"Pacific/Rarotonga":1},"cl":{"America/Punta_Arenas":1,"America/Santiago":1,"Pacific/Easter":1},"cm":{"Africa/Douala":1},"cn":{"Asia/Shanghai":1,"Asia/Urumqi":1},"co":{"America/Bogota":1},"cr":{"America/Costa_Rica":1},"cu":{"America/Havana":1},"cv":{"Atlantic/Cape_Verde":1},"cw":{"America/Curacao":1},"cx":{"Indian/Christmas":1},"cy":{"Asia/Famagusta":1,"Asia/Nicosia":1},"cz":{"Europe/Prague":1},"de":{"Europe/Berlin":1,"Europe/Busingen":1},"dj":{"Africa/Djibouti":1},"dk":{"Europe/Copenhagen":1},"dm":{"America/Dominica":1},"do":{"America/Santo_Domingo":1},"dz":{"Africa/Algiers":1},"ec":{"America/Guayaquil":1,"Pacific/Galapagos":1},"ee":{"Europe/Tallinn":1},"eg":{"Africa/Cairo":1},"eh":{"Africa/El_Aaiun":1},"er":{"Africa/Asmara":1},"es":{"Africa/Ceuta":1,"Atlantic/Canary":1,"Europe/Madrid":1},"et":{"Africa/Addis_Ababa":1},"fi":{"Europe/Helsinki":1},"fj":{"Pacific/Fiji":1},"fk":{"Atlantic/Stanley":1},"fm":{"Pacific/Chuuk":1,"Pacific/Kosrae":1,"Pacific/Pohnpei":1},"fo":{"Atlantic/Faroe":1},"fr":{"Europe/Paris":1},"ga":{"Africa/Libreville":1},"gb":{"Europe/London":1},"gd":{"America/Grenada":1},"ge":{"Asia/Tbilisi":1},"gf":{"America/Cayenne":1},"gg":{"Europe/Guernsey":1},"gh":{"Africa/Accra":1},"gi":{"Europe/Gibraltar":1},"gl":{"America/Danmarkshavn":1,"America/Nuuk":1,"America/Scoresbysund":1,"America/Thule":1},"gm":{"Africa/Banjul":1},"gn":{"Africa/Conakry":1},"gp":{"America/Guadeloupe":1},"gq":{"Africa/Malabo":1},"gr":{"Europe/Athens":1},"gs":{"Atlantic/South_Georgia":1},"gt":{"America/Guatemala":1},"gu":{"Pacific/Guam":1},"gw":{"Africa/Bissau":1},"gy":{"America/Guyana":1},"hk":{"Asia/Hong_Kong":1},"hn":{"America/Tegucigalpa":1},"hr":{"Europe/Zagreb":1},"ht":{"America/Port-au-Prince":1},"hu":{"Europe/Budapest":1},"id":{"Asia/Jakarta":1,"Asia/Jayapura":1,"Asia/Makassar":1,"Asia/Pontianak":1},"ie":{"Europe/Dublin":1},"il":{"Asia/Jerusalem":1},"im":{"Europe/Isle_of_Man":1},"in":{"Asia/Kolkata":1},"io":{"Indian/Chagos":1},"iq":{"Asia/Baghdad":1},"ir":{"Asia/Tehran":1},"is":{"Atlantic/Reykjavik":1},"it":{"Europe/Rome":1},"je":{"Europe/Jersey":1},"jm":{"America/Jamaica":1},"jo":{"Asia/Amman":1},"jp":{"Asia/Tokyo":1},"ke":{"Africa/Nairobi":1},"kg":{"Asia/Bishkek":1},"kh":{"Asia/Phnom_Penh":1},"ki":{"Pacific/Kanton":1,"Pacific/Kiritimati":1,"Pacific/Tarawa":1},"km":{"Indian/Comoro":1},"kn":{"America/St_Kitts":1},"kp":{"Asia/Pyongyang":1},"kr":{"Asia/Seoul":1},"kw":{"Asia/Kuwait":1},"ky":{"America/Cayman":1},"kz":{"Asia/Almaty":1,"Asia/Aqtau":1,"Asia/Aqtobe":1,"Asia/Atyrau":1,"Asia/Oral":1,"Asia/Qostanay":1,"Asia/Qyzylorda":1},"la":{"Asia/Vientiane":1},"lb":{"Asia/Beirut":1},"lc":{"America/St_Lucia":1},"li":{"Europe/Vaduz":1},"lk":{"Asia/Colombo":1},"lr":{"Africa/Monrovia":1},"ls":{"Africa/Maseru":1},"lt":{"Europe/Vilnius":1},"lu":{"Europe/Luxembourg":1},"lv":{"Europe/Riga":1},"ly":{"Africa/Tripoli":1},"ma":{"Africa/Casablanca":1},"mc":{"Europe/Monaco":1},"md":{"Europe/Chisinau":1},"me":{"Europe/Podgorica":1},"mf":{"America/Marigot":1},"mg":{"Indian/Antananarivo":1},"mh":{"Pacific/Kwajalein":1,"Pacific/Majuro":1},"mk":{"Europe/Skopje":1},"ml":{"Africa/Bamako":1},"mm":{"Asia/Yangon":1},"mn":{"Asia/Choibalsan":1,"Asia/Hovd":1,"Asia/Ulaanbaatar":1},"mo":{"Asia/Macau":1},"mp":{"Pacific/Saipan":1},"mq":{"America/Martinique":1},"mr":{"Africa/Nouakchott":1},"ms":{"America/Montserrat":1},"mt":{"Europe/Malta":1},"mu":{"Indian/Mauritius":1},"mv":{"Indian/Maldives":1},"mw":{"Africa/Blantyre":1},"mx":{"America/Bahia_Banderas":1,"America/Cancun":1,"America/Chihuahua":1,"America/Ciudad_Juarez":1,"America/Hermosillo":1,"America/Matamoros":1,"America/Mazatlan":1,"America/Merida":1,"America/Mexico_City":1,"America/Monterrey":1,"America/Ojinaga":1,"America/Tijuana":1},"my":{"Asia/Kuala_Lumpur":1,"Asia/Kuching":1},"mz":{"Africa/Maputo":1},"na":{"Africa/Windhoek":1},"nc":{"Pacific/Noumea":1},"ne":{"Africa/Niamey":1},"nf":{"Pacific/Norfolk":1},"ng":{"Africa/Lagos":1},"ni":{"America/Managua":1},"nl":{"Europe/Amsterdam":1},"no":{"Europe/Oslo":1},"np":{"Asia/Kathmandu":1},"nr":{"Pacific/Nauru":1},"nu":{"Pacific/Niue":1},"nz":{"Pacific/Auckland":1,"Pacific/Chatham":1},"om":{"Asia/Muscat":1},"pa":{"America/Panama":1},"pe":{"America/Lima":1},"pf":{"Pacific/Gambier":1,"Pacific/Marquesas":1,"Pacific/Tahiti":1},"pg":{"Pacific/Bougainville":1,"Pacific/Port_Moresby":1},"ph":{"Asia/Manila":1},"pk":{"Asia/Karachi":1},"pl":{"Europe/Warsaw":1},"pm":{"America/Miquelon":1},"pn":{"Pacific/Pitcairn":1},"pr":{"America/Puerto_Rico":1},"ps":{"Asia/Gaza":1,"Asia/Hebron":1},"pt":{"Atlantic/Azores":1,"Atlantic/Madeira":1,"Europe/Lisbon":1},"pw":{"Pacific/Palau":1},"py":{"America/Asuncion":1},"qa":{"Asia/Qatar":1},"re":{"Indian/Reunion":1},"ro":{"Europe/Bucharest":1},"rs":{"Europe/Belgrade":1},"ru":{"Asia/Anadyr":1,"Asia/Barnaul":1,"Asia/Chita":1,"Asia/Irkutsk":1,"Asia/Kamchatka":1,"Asia/Khandyga":1,"Asia/Krasnoyarsk":1,"Asia/Magadan":1,"Asia/Novokuznetsk":1,"Asia/Novosibirsk":1,"Asia/Omsk":1,"Asia/Sakhalin":1,"Asia/Srednekolymsk":1,"Asia/Tomsk":1,"Asia/Ust-Nera":1,"Asia/Vladivostok":1,"Asia/Yakutsk":1,"Asia/Yekaterinburg":1,"Europe/Astrakhan":1,"Europe/Kaliningrad":1,"Europe/Kirov":1,"Europe/Moscow":1,"Europe/Samara":1,"Europe/Saratov":1,"Europe/Ulyanovsk":1,"Europe/Volgograd":1},"rw":{"Africa/Kigali":1},"sa":{"Asia/Riyadh":1},"sb":{"Pacific/Guadalcanal":1},"sc":{"Indian/Mahe":1},"sd":{"Africa/Khartoum":1},"se":{"Europe/Stockholm":1},"sg":{"Asia/Singapore":1},"sh":{"Atlantic/St_Helena":1},"si":{"Europe/Ljubljana":1},"sj":{"Arctic/Longyearbyen":1},"sk":{"Europe/Bratislava":1},"sl":{"Africa/Freetown":1},"sm":{"Europe/San_Marino":1},"sn":{"Africa/Dakar":1},"so":{"Africa/Mogadishu":1},"sr":{"America/Paramaribo":1},"ss":{"Africa/Juba":1},"st":{"Africa/Sao_Tome":1},"sv":{"America/El_Salvador":1},"sx":{"America/Lower_Princes":1},"sy":{"Asia/Damascus":1},"sz":{"Africa/Mbabane":1},"tc":{"America/Grand_Turk":1},"td":{"Africa/Ndjamena":1},"tf":{"Indian/Kerguelen":1},"tg":{"Africa/Lome":1},"th":{"Asia/Bangkok":1},"tj":{"Asia/Dushanbe":1},"tk":{"Pacific/Fakaofo":1},"tl":{"Asia/Dili":1},"tm":{"Asia/Ashgabat":1},"tn":{"Africa/Tunis":1},"to":{"Pacific/Tongatapu":1},"tr":{"Europe/Istanbul":1},"tt":{"America/Port_of_Spain":1},"tv":{"Pacific/Funafuti":1},"tw":{"Asia/Taipei":1},"tz":{"Africa/Dar_es_Salaam":1},"ua":{"Europe/Kyiv":1,"Europe/Simferopol":1},"ug":{"Africa/Kampala":1},"um":{"Pacific/Midway":1,"Pacific/Wake":1},"us":{"America/Adak":1,"America/Anchorage":1,"America/Boise":1,"America/Chicago":1,"America/Denver":1,"America/Detroit":1,"America/Indiana/Indianapolis":1,"America/Indiana/Knox":1,"America/Indiana/Marengo":1,"America/Indiana/Petersburg":1,"America/Indiana/Tell_City":1,"America/Indiana/Vevay":1,"America/Indiana/Vincennes":1,"America/Indiana/Winamac":1,"America/Juneau":1,"America/Kentucky/Louisville":1,"America/Kentucky/Monticello":1,"America/Los_Angeles":1,"America/Menominee":1,"America/Metlakatla":1,"America/New_York":1,"America/Nome":1,"America/North_Dakota/Beulah":1,"America/North_Dakota/Center":1,"America/North_Dakota/New_Salem":1,"America/Phoenix":1,"America/Sitka":1,"America/Yakutat":1,"Pacific/Honolulu":1},"uy":{"America/Montevideo":1},"uz":{"Asia/Samarkand":1,"Asia/Tashkent":1},"va":{"Europe/Vatican":1},"vc":{"America/St_Vincent":1},"ve":{"America/Caracas":1},"vg":{"America/Tortola":1},"vi":{"America/St_Thomas":1},"vn":{"Asia/Ho_Chi_Minh":1},"vu":{"Pacific/Efate":1},"wf":{"Pacific/Wallis":1},"ws":{"Pacific/Apia":1},"ye":{"Asia/Aden":1},"yt":{"Indian/Mayotte":1},"za":{"Africa/Johannesburg":1},"zm":{"Africa/Lusaka":1},"zw":{"Africa/Harare":1}},"country":{"ad":{"kmap":"","mirror":"","name":"Andorra","zone":"Europe/Andorra"},"ae":{"kmap":"","mirror":"","name":"United Arab Emirates","zone":"Asia/Dubai"},"af":{"kmap":"","mirror":"","name":"Afghanistan","zone":"Asia/Kabul"},"ag":{"kmap":"","mirror":"","name":"Antigua and Barbuda","zone":"America/Antigua"},"ai":{"kmap":"","mirror":"","name":"Anguilla","zone":"America/Anguilla"},"al":{"kmap":"","mirror":"","name":"Albania","zone":"Europe/Tirane"},"am":{"kmap":"","mirror":"","name":"Armenia","zone":"Asia/Yerevan"},"ao":{"kmap":"","mirror":"","name":"Angola","zone":"Africa/Luanda"},"aq":{"kmap":"","mirror":"","name":"Antarctica","zone":"Antarctica/McMurdo"},"ar":{"kmap":"","mirror":"","name":"Argentina","zone":"America/Argentina/Buenos_Aires"},"as":{"kmap":"","mirror":"","name":"American Samoa","zone":"Pacific/Pago_Pago"},"at":{"kmap":"de","mirror":"ftp.at.debian.org","name":"Austria","zone":"Europe/Vienna"},"au":{"kmap":"","mirror":"ftp.au.debian.org","name":"Australia","zone":"Australia/Lord_Howe"},"aw":{"kmap":"","mirror":"","name":"Aruba","zone":"America/Aruba"},"ax":{"kmap":"","mirror":"","name":"Åland Islands","zone":"Europe/Mariehamn"},"az":{"kmap":"","mirror":"","name":"Azerbaijan","zone":"Asia/Baku"},"ba":{"kmap":"","mirror":"","name":"Bosnia and Herzegovina","zone":"Europe/Sarajevo"},"bb":{"kmap":"","mirror":"","name":"Barbados","zone":"America/Barbados"},"bd":{"kmap":"","mirror":"","name":"Bangladesh","zone":"Asia/Dhaka"},"be":{"kmap":"fr-be","mirror":"ftp.be.debian.org","name":"Belgium","zone":"Europe/Brussels"},"bf":{"kmap":"","mirror":"","name":"Burkina Faso","zone":"Africa/Ouagadougou"},"bg":{"kmap":"","mirror":"ftp.bg.debian.org","name":"Bulgaria","zone":"Europe/Sofia"},"bh":{"kmap":"","mirror":"","name":"Bahrain","zone":"Asia/Bahrain"},"bi":{"kmap":"","mirror":"","name":"Burundi","zone":"Africa/Bujumbura"},"bj":{"kmap":"","mirror":"","name":"Benin","zone":"Africa/Porto-Novo"},"bl":{"kmap":"","mirror":"","name":"Saint Barthélemy","zone":"America/St_Barthelemy"},"bm":{"kmap":"","mirror":"","name":"Bermuda","zone":"Atlantic/Bermuda"},"bn":{"kmap":"","mirror":"","name":"Brunei Darussalam","zone":"Asia/Brunei"},"bo":{"kmap":"","mirror":"","name":"Bolivia","zone":"America/La_Paz"},"bq":{"kmap":"","mirror":"","name":"Bonaire, Sint Eustatius and Saba","zone":"America/Kralendijk"},"br":{"kmap":"pt-br","mirror":"ftp.br.debian.org","name":"Brazil","zone":"America/Noronha"},"bs":{"kmap":"","mirror":"","name":"Bahamas","zone":"America/Nassau"},"bt":{"kmap":"","mirror":"","name":"Bhutan","zone":"Asia/Thimphu"},"bv":{"kmap":"","mirror":"","name":"Bouvet Island"},"bw":{"kmap":"","mirror":"","name":"Botswana","zone":"Africa/Gaborone"},"by":{"kmap":"","mirror":"","name":"Belarus","zone":"Europe/Minsk"},"bz":{"kmap":"","mirror":"","name":"Belize","zone":"America/Belize"},"ca":{"kmap":"en-us","mirror":"ftp.ca.debian.org","name":"Canada","zone":"America/St_Johns"},"cc":{"kmap":"","mirror":"","name":"Cocos (Keeling) Islands","zone":"Indian/Cocos"},"cd":{"kmap":"","mirror":"","name":"Congo, The Democratic Republic of the","zone":"Africa/Kinshasa"},"cf":{"kmap":"","mirror":"","name":"Central African Republic","zone":"Africa/Bangui"},"cg":{"kmap":"","mirror":"","name":"Congo","zone":"Africa/Brazzaville"},"ch":{"kmap":"de-ch","mirror":"ftp.ch.debian.org","name":"Switzerland","zone":"Europe/Zurich"},"ci":{"kmap":"","mirror":"","name":"Côte d'Ivoire","zone":"Africa/Abidjan"},"ck":{"kmap":"","mirror":"","name":"Cook Islands","zone":"Pacific/Rarotonga"},"cl":{"kmap":"","mirror":"ftp.cl.debian.org","name":"Chile","zone":"America/Santiago"},"cm":{"kmap":"","mirror":"","name":"Cameroon","zone":"Africa/Douala"},"cn":{"kmap":"","mirror":"","name":"China","zone":"Asia/Shanghai"},"co":{"kmap":"","mirror":"","name":"Colombia","zone":"America/Bogota"},"cr":{"kmap":"","mirror":"","name":"Costa Rica","zone":"America/Costa_Rica"},"cu":{"kmap":"","mirror":"","name":"Cuba","zone":"America/Havana"},"cv":{"kmap":"","mirror":"","name":"Cabo Verde","zone":"Atlantic/Cape_Verde"},"cw":{"kmap":"","mirror":"","name":"Curaçao","zone":"America/Curacao"},"cx":{"kmap":"","mirror":"","name":"Christmas Island","zone":"Indian/Christmas"},"cy":{"kmap":"","mirror":"","name":"Cyprus","zone":"Asia/Nicosia"},"cz":{"kmap":"","mirror":"ftp.cz.debian.org","name":"Czechia","zone":"Europe/Prague"},"de":{"kmap":"de","mirror":"ftp.de.debian.org","name":"Germany","zone":"Europe/Berlin"},"dj":{"kmap":"","mirror":"","name":"Djibouti","zone":"Africa/Djibouti"},"dk":{"kmap":"dk","mirror":"ftp.dk.debian.org","name":"Denmark","zone":"Europe/Copenhagen"},"dm":{"kmap":"","mirror":"","name":"Dominica","zone":"America/Dominica"},"do":{"kmap":"","mirror":"","name":"Dominican Republic","zone":"America/Santo_Domingo"},"dz":{"kmap":"","mirror":"","name":"Algeria","zone":"Africa/Algiers"},"ec":{"kmap":"","mirror":"","name":"Ecuador","zone":"America/Guayaquil"},"ee":{"kmap":"","mirror":"ftp.ee.debian.org","name":"Estonia","zone":"Europe/Tallinn"},"eg":{"kmap":"","mirror":"","name":"Egypt","zone":"Africa/Cairo"},"eh":{"kmap":"","mirror":"","name":"Western Sahara","zone":"Africa/El_Aaiun"},"er":{"kmap":"","mirror":"","name":"Eritrea","zone":"Africa/Asmara"},"es":{"kmap":"es","mirror":"ftp.es.debian.org","name":"Spain","zone":"Europe/Madrid"},"et":{"kmap":"","mirror":"","name":"Ethiopia","zone":"Africa/Addis_Ababa"},"fi":{"kmap":"fi","mirror":"ftp.fi.debian.org","name":"Finland","zone":"Europe/Helsinki"},"fj":{"kmap":"","mirror":"","name":"Fiji","zone":"Pacific/Fiji"},"fk":{"kmap":"","mirror":"","name":"Falkland Islands (Malvinas)","zone":"Atlantic/Stanley"},"fm":{"kmap":"","mirror":"","name":"Micronesia, Federated States of","zone":"Pacific/Chuuk"},"fo":{"kmap":"","mirror":"","name":"Faroe Islands","zone":"Atlantic/Faroe"},"fr":{"kmap":"fr","mirror":"ftp.fr.debian.org","name":"France","zone":"Europe/Paris"},"ga":{"kmap":"","mirror":"","name":"Gabon","zone":"Africa/Libreville"},"gb":{"kmap":"en-gb","mirror":"ftp.uk.debian.org","name":"United Kingdom","zone":"Europe/London"},"gd":{"kmap":"","mirror":"","name":"Grenada","zone":"America/Grenada"},"ge":{"kmap":"","mirror":"","name":"Georgia","zone":"Asia/Tbilisi"},"gf":{"kmap":"","mirror":"","name":"French Guiana","zone":"America/Cayenne"},"gg":{"kmap":"","mirror":"","name":"Guernsey","zone":"Europe/Guernsey"},"gh":{"kmap":"","mirror":"","name":"Ghana","zone":"Africa/Accra"},"gi":{"kmap":"es","mirror":"","name":"Gibraltar","zone":"Europe/Gibraltar"},"gl":{"kmap":"","mirror":"","name":"Greenland","zone":"America/Nuuk"},"gm":{"kmap":"","mirror":"","name":"Gambia","zone":"Africa/Banjul"},"gn":{"kmap":"","mirror":"","name":"Guinea","zone":"Africa/Conakry"},"gp":{"kmap":"","mirror":"","name":"Guadeloupe","zone":"America/Guadeloupe"},"gq":{"kmap":"","mirror":"","name":"Equatorial Guinea","zone":"Africa/Malabo"},"gr":{"kmap":"","mirror":"ftp.gr.debian.org","name":"Greece","zone":"Europe/Athens"},"gs":{"kmap":"","mirror":"","name":"South Georgia and the South Sandwich Islands","zone":"Atlantic/South_Georgia"},"gt":{"kmap":"","mirror":"","name":"Guatemala","zone":"America/Guatemala"},"gu":{"kmap":"","mirror":"","name":"Guam","zone":"Pacific/Guam"},"gw":{"kmap":"","mirror":"","name":"Guinea-Bissau","zone":"Africa/Bissau"},"gy":{"kmap":"","mirror":"","name":"Guyana","zone":"America/Guyana"},"hk":{"kmap":"","mirror":"ftp.hk.debian.org","name":"Hong Kong","zone":"Asia/Hong_Kong"},"hm":{"kmap":"","mirror":"","name":"Heard Island and McDonald Islands"},"hn":{"kmap":"","mirror":"","name":"Honduras","zone":"America/Tegucigalpa"},"hr":{"kmap":"","mirror":"ftp.hr.debian.org","name":"Croatia","zone":"Europe/Zagreb"},"ht":{"kmap":"","mirror":"","name":"Haiti","zone":"America/Port-au-Prince"},"hu":{"kmap":"hu","mirror":"ftp.hu.debian.org","name":"Hungary","zone":"Europe/Budapest"},"id":{"kmap":"","mirror":"","name":"Indonesia","zone":"Asia/Jakarta"},"ie":{"kmap":"","mirror":"ftp.ie.debian.org","name":"Ireland","zone":"Europe/Dublin"},"il":{"kmap":"","mirror":"","name":"Israel","zone":"Asia/Jerusalem"},"im":{"kmap":"","mirror":"","name":"Isle of Man","zone":"Europe/Isle_of_Man"},"in":{"kmap":"","mirror":"","name":"India","zone":"Asia/Kolkata"},"io":{"kmap":"","mirror":"","name":"British Indian Ocean Territory","zone":"Indian/Chagos"},"iq":{"kmap":"","mirror":"","name":"Iraq","zone":"Asia/Baghdad"},"ir":{"kmap":"","mirror":"","name":"Iran","zone":"Asia/Tehran"},"is":{"kmap":"is","mirror":"ftp.is.debian.org","name":"Iceland","zone":"Atlantic/Reykjavik"},"it":{"kmap":"it","mirror":"ftp.it.debian.org","name":"Italy","zone":"Europe/Rome"},"je":{"kmap":"","mirror":"","name":"Jersey","zone":"Europe/Jersey"},"jm":{"kmap":"","mirror":"","name":"Jamaica","zone":"America/Jamaica"},"jo":{"kmap":"","mirror":"","name":"Jordan","zone":"Asia/Amman"},"jp":{"kmap":"jp","mirror":"ftp.jp.debian.org","name":"Japan","zone":"Asia/Tokyo"},"ke":{"kmap":"","mirror":"","name":"Kenya","zone":"Africa/Nairobi"},"kg":{"kmap":"","mirror":"","name":"Kyrgyzstan","zone":"Asia/Bishkek"},"kh":{"kmap":"","mirror":"","name":"Cambodia","zone":"Asia/Phnom_Penh"},"ki":{"kmap":"","mirror":"","name":"Kiribati","zone":"Pacific/Tarawa"},"km":{"kmap":"","mirror":"","name":"Comoros","zone":"Indian/Comoro"},"kn":{"kmap":"","mirror":"","name":"Saint Kitts and Nevis","zone":"America/St_Kitts"},"kp":{"kmap":"","mirror":"","name":"North Korea","zone":"Asia/Pyongyang"},"kr":{"kmap":"","mirror":"ftp.kr.debian.org","name":"South Korea","zone":"Asia/Seoul"},"kw":{"kmap":"","mirror":"","name":"Kuwait","zone":"Asia/Kuwait"},"ky":{"kmap":"","mirror":"","name":"Cayman Islands","zone":"America/Cayman"},"kz":{"kmap":"","mirror":"","name":"Kazakhstan","zone":"Asia/Almaty"},"la":{"kmap":"","mirror":"","name":"Laos","zone":"Asia/Vientiane"},"lb":{"kmap":"","mirror":"","name":"Lebanon","zone":"Asia/Beirut"},"lc":{"kmap":"","mirror":"","name":"Saint Lucia","zone":"America/St_Lucia"},"li":{"kmap":"de-ch","mirror":"","name":"Liechtenstein","zone":"Europe/Vaduz"},"lk":{"kmap":"","mirror":"","name":"Sri Lanka","zone":"Asia/Colombo"},"lr":{"kmap":"","mirror":"","name":"Liberia","zone":"Africa/Monrovia"},"ls":{"kmap":"","mirror":"","name":"Lesotho","zone":"Africa/Maseru"},"lt":{"kmap":"lt","mirror":"","name":"Lithuania","zone":"Europe/Vilnius"},"lu":{"kmap":"fr-ch","mirror":"","name":"Luxembourg","zone":"Europe/Luxembourg"},"lv":{"kmap":"","mirror":"","name":"Latvia","zone":"Europe/Riga"},"ly":{"kmap":"","mirror":"","name":"Libya","zone":"Africa/Tripoli"},"ma":{"kmap":"","mirror":"","name":"Morocco","zone":"Africa/Casablanca"},"mc":{"kmap":"","mirror":"","name":"Monaco","zone":"Europe/Monaco"},"md":{"kmap":"","mirror":"","name":"Moldova","zone":"Europe/Chisinau"},"me":{"kmap":"","mirror":"","name":"Montenegro","zone":"Europe/Podgorica"},"mf":{"kmap":"","mirror":"","name":"Saint Martin (French part)","zone":"America/Marigot"},"mg":{"kmap":"","mirror":"","name":"Madagascar","zone":"Indian/Antananarivo"},"mh":{"kmap":"","mirror":"","name":"Marshall Islands","zone":"Pacific/Majuro"},"mk":{"kmap":"mk","mirror":"","name":"North Macedonia","zone":"Europe/Skopje"},"ml":{"kmap":"","mirror":"","name":"Mali","zone":"Africa/Bamako"},"mm":{"kmap":"","mirror":"","name":"Myanmar","zone":"Asia/Yangon"},"mn":{"kmap":"","mirror":"","name":"Mongolia","zone":"Asia/Ulaanbaatar"},"mo":{"kmap":"","mirror":"","name":"Macao","zone":"Asia/Macau"},"mp":{"kmap":"","mirror":"","name":"Northern Mariana Islands","zone":"Pacific/Saipan"},"mq":{"kmap":"","mirror":"","name":"Martinique","zone":"America/Martinique"},"mr":{"kmap":"","mirror":"","name":"Mauritania","zone":"Africa/Nouakchott"},"ms":{"kmap":"","mirror":"","name":"Montserrat","zone":"America/Montserrat"},"mt":{"kmap":"","mirror":"","name":"Malta","zone":"Europe/Malta"},"mu":{"kmap":"","mirror":"","name":"Mauritius","zone":"Indian/Mauritius"},"mv":{"kmap":"","mirror":"","name":"Maldives","zone":"Indian/Maldives"},"mw":{"kmap":"","mirror":"","name":"Malawi","zone":"Africa/Blantyre"},"mx":{"kmap":"","mirror":"ftp.mx.debian.org","name":"Mexico","zone":"America/Mexico_City"},"my":{"kmap":"","mirror":"","name":"Malaysia","zone":"Asia/Kuala_Lumpur"},"mz":{"kmap":"","mirror":"","name":"Mozambique","zone":"Africa/Maputo"},"na":{"kmap":"","mirror":"","name":"Namibia","zone":"Africa/Windhoek"},"nc":{"kmap":"","mirror":"","name":"New Caledonia","zone":"Pacific/Noumea"},"ne":{"kmap":"","mirror":"","name":"Niger","zone":"Africa/Niamey"},"nf":{"kmap":"","mirror":"","name":"Norfolk Island","zone":"Pacific/Norfolk"},"ng":{"kmap":"","mirror":"","name":"Nigeria","zone":"Africa/Lagos"},"ni":{"kmap":"","mirror":"","name":"Nicaragua","zone":"America/Managua"},"nl":{"kmap":"en-us","mirror":"ftp.nl.debian.org","name":"Netherlands","zone":"Europe/Amsterdam"},"no":{"kmap":"no","mirror":"ftp.no.debian.org","name":"Norway","zone":"Europe/Oslo"},"np":{"kmap":"","mirror":"","name":"Nepal","zone":"Asia/Kathmandu"},"nr":{"kmap":"","mirror":"","name":"Nauru","zone":"Pacific/Nauru"},"nu":{"kmap":"","mirror":"","name":"Niue","zone":"Pacific/Niue"},"nz":{"kmap":"","mirror":"ftp.nz.debian.org","name":"New Zealand","zone":"Pacific/Auckland"},"om":{"kmap":"","mirror":"","name":"Oman","zone":"Asia/Muscat"},"pa":{"kmap":"","mirror":"","name":"Panama","zone":"America/Panama"},"pe":{"kmap":"","mirror":"","name":"Peru","zone":"America/Lima"},"pf":{"kmap":"","mirror":"","name":"French Polynesia","zone":"Pacific/Tahiti"},"pg":{"kmap":"","mirror":"","name":"Papua New Guinea","zone":"Pacific/Port_Moresby"},"ph":{"kmap":"","mirror":"","name":"Philippines","zone":"Asia/Manila"},"pk":{"kmap":"","mirror":"","name":"Pakistan","zone":"Asia/Karachi"},"pl":{"kmap":"pl","mirror":"ftp.pl.debian.org","name":"Poland","zone":"Europe/Warsaw"},"pm":{"kmap":"","mirror":"","name":"Saint Pierre and Miquelon","zone":"America/Miquelon"},"pn":{"kmap":"","mirror":"","name":"Pitcairn","zone":"Pacific/Pitcairn"},"pr":{"kmap":"","mirror":"","name":"Puerto Rico","zone":"America/Puerto_Rico"},"ps":{"kmap":"","mirror":"","name":"Palestine, State of","zone":"Asia/Gaza"},"pt":{"kmap":"pt","mirror":"ftp.pt.debian.org","name":"Portugal","zone":"Europe/Lisbon"},"pw":{"kmap":"","mirror":"","name":"Palau","zone":"Pacific/Palau"},"py":{"kmap":"","mirror":"","name":"Paraguay","zone":"America/Asuncion"},"qa":{"kmap":"","mirror":"","name":"Qatar","zone":"Asia/Qatar"},"re":{"kmap":"","mirror":"","name":"Réunion","zone":"Indian/Reunion"},"ro":{"kmap":"","mirror":"ftp.ro.debian.org","name":"Romania","zone":"Europe/Bucharest"},"rs":{"kmap":"","mirror":"","name":"Serbia","zone":"Europe/Belgrade"},"ru":{"kmap":"","mirror":"ftp.ru.debian.org","name":"Russian Federation","zone":"Europe/Kaliningrad"},"rw":{"kmap":"","mirror":"","name":"Rwanda","zone":"Africa/Kigali"},"sa":{"kmap":"","mirror":"","name":"Saudi Arabia","zone":"Asia/Riyadh"},"sb":{"kmap":"","mirror":"","name":"Solomon Islands","zone":"Pacific/Guadalcanal"},"sc":{"kmap":"","mirror":"","name":"Seychelles","zone":"Indian/Mahe"},"sd":{"kmap":"","mirror":"","name":"Sudan","zone":"Africa/Khartoum"},"se":{"kmap":"","mirror":"ftp.se.debian.org","name":"Sweden","zone":"Europe/Stockholm"},"sg":{"kmap":"","mirror":"","name":"Singapore","zone":"Asia/Singapore"},"sh":{"kmap":"","mirror":"","name":"Saint Helena, Ascension and Tristan da Cunha","zone":"Atlantic/St_Helena"},"si":{"kmap":"si","mirror":"ftp.si.debian.org","name":"Slovenia","zone":"Europe/Ljubljana"},"sj":{"kmap":"","mirror":"","name":"Svalbard and Jan Mayen","zone":"Arctic/Longyearbyen"},"sk":{"kmap":"","mirror":"ftp.sk.debian.org","name":"Slovakia","zone":"Europe/Bratislava"},"sl":{"kmap":"","mirror":"","name":"Sierra Leone","zone":"Africa/Freetown"},"sm":{"kmap":"","mirror":"","name":"San Marino","zone":"Europe/San_Marino"},"sn":{"kmap":"","mirror":"","name":"Senegal","zone":"Africa/Dakar"},"so":{"kmap":"","mirror":"","name":"Somalia","zone":"Africa/Mogadishu"},"sr":{"kmap":"","mirror":"","name":"Suriname","zone":"America/Paramaribo"},"ss":{"kmap":"","mirror":"","name":"South Sudan","zone":"Africa/Juba"},"st":{"kmap":"","mirror":"","name":"Sao Tome and Principe","zone":"Africa/Sao_Tome"},"sv":{"kmap":"","mirror":"","name":"El Salvador","zone":"America/El_Salvador"},"sx":{"kmap":"","mirror":"","name":"Sint Maarten (Dutch part)","zone":"America/Lower_Princes"},"sy":{"kmap":"","mirror":"","name":"Syria","zone":"Asia/Damascus"},"sz":{"kmap":"","mirror":"","name":"Eswatini","zone":"Africa/Mbabane"},"tc":{"kmap":"","mirror":"","name":"Turks and Caicos Islands","zone":"America/Grand_Turk"},"td":{"kmap":"","mirror":"","name":"Chad","zone":"Africa/Ndjamena"},"tf":{"kmap":"","mirror":"","name":"French Southern Territories","zone":"Indian/Kerguelen"},"tg":{"kmap":"","mirror":"","name":"Togo","zone":"Africa/Lome"},"th":{"kmap":"","mirror":"","name":"Thailand","zone":"Asia/Bangkok"},"tj":{"kmap":"","mirror":"","name":"Tajikistan","zone":"Asia/Dushanbe"},"tk":{"kmap":"","mirror":"","name":"Tokelau","zone":"Pacific/Fakaofo"},"tl":{"kmap":"","mirror":"","name":"Timor-Leste","zone":"Asia/Dili"},"tm":{"kmap":"","mirror":"","name":"Turkmenistan","zone":"Asia/Ashgabat"},"tn":{"kmap":"","mirror":"","name":"Tunisia","zone":"Africa/Tunis"},"to":{"kmap":"","mirror":"","name":"Tonga","zone":"Pacific/Tongatapu"},"tr":{"kmap":"","mirror":"ftp.tr.debian.org","name":"Türkiye","zone":"Europe/Istanbul"},"tt":{"kmap":"","mirror":"","name":"Trinidad and Tobago","zone":"America/Port_of_Spain"},"tv":{"kmap":"","mirror":"","name":"Tuvalu","zone":"Pacific/Funafuti"},"tw":{"kmap":"","mirror":"ftp.tw.debian.org","name":"Taiwan","zone":"Asia/Taipei"},"tz":{"kmap":"","mirror":"","name":"Tanzania","zone":"Africa/Dar_es_Salaam"},"ua":{"kmap":"","mirror":"","name":"Ukraine","zone":"Europe/Simferopol"},"ug":{"kmap":"","mirror":"","name":"Uganda","zone":"Africa/Kampala"},"um":{"kmap":"","mirror":"","name":"United States Minor Outlying Islands","zone":"Pacific/Midway"},"us":{"kmap":"en-us","mirror":"ftp.us.debian.org","name":"United States","zone":"America/New_York"},"uy":{"kmap":"","mirror":"","name":"Uruguay","zone":"America/Montevideo"},"uz":{"kmap":"","mirror":"","name":"Uzbekistan","zone":"Asia/Samarkand"},"va":{"kmap":"it","mirror":"","name":"Holy See (Vatican City State)","zone":"Europe/Vatican"},"vc":{"kmap":"","mirror":"","name":"Saint Vincent and the Grenadines","zone":"America/St_Vincent"},"ve":{"kmap":"","mirror":"","name":"Venezuela","zone":"America/Caracas"},"vg":{"kmap":"","mirror":"","name":"Virgin Islands, British","zone":"America/Tortola"},"vi":{"kmap":"","mirror":"","name":"Virgin Islands, U.S.","zone":"America/St_Thomas"},"vn":{"kmap":"","mirror":"","name":"Vietnam","zone":"Asia/Ho_Chi_Minh"},"vu":{"kmap":"","mirror":"","name":"Vanuatu","zone":"Pacific/Efate"},"wf":{"kmap":"","mirror":"","name":"Wallis and Futuna","zone":"Pacific/Wallis"},"ws":{"kmap":"","mirror":"","name":"Samoa","zone":"Pacific/Apia"},"ye":{"kmap":"","mirror":"","name":"Yemen","zone":"Asia/Aden"},"yt":{"kmap":"","mirror":"","name":"Mayotte","zone":"Indian/Mayotte"},"za":{"kmap":"","mirror":"","name":"South Africa","zone":"Africa/Johannesburg"},"zm":{"kmap":"","mirror":"","name":"Zambia","zone":"Africa/Lusaka"},"zw":{"kmap":"","mirror":"","name":"Zimbabwe","zone":"Africa/Harare"}},"countryhash":{"afghanistan":"af","albania":"al","algeria":"dz","american samoa":"as","andorra":"ad","angola":"ao","anguilla":"ai","antarctica":"aq","antigua and barbuda":"ag","argentina":"ar","armenia":"am","aruba":"aw","australia":"au","austria":"at","azerbaijan":"az","bahamas":"bs","bahrain":"bh","bangladesh":"bd","barbados":"bb","belarus":"by","belgium":"be","belize":"bz","benin":"bj","bermuda":"bm","bhutan":"bt","bolivia":"bo","bonaire, sint eustatius and saba":"bq","bosnia and herzegovina":"ba","botswana":"bw","bouvet island":"bv","brazil":"br","british indian ocean territory":"io","brunei darussalam":"bn","bulgaria":"bg","burkina faso":"bf","burundi":"bi","cabo verde":"cv","cambodia":"kh","cameroon":"cm","canada":"ca","cayman islands":"ky","central african republic":"cf","chad":"td","chile":"cl","china":"cn","christmas island":"cx","cocos (keeling) islands":"cc","colombia":"co","comoros":"km","congo":"cg","congo, the democratic republic of the":"cd","cook islands":"ck","costa rica":"cr","croatia":"hr","cuba":"cu","curaçao":"cw","cyprus":"cy","czechia":"cz","côte d'ivoire":"ci","denmark":"dk","djibouti":"dj","dominica":"dm","dominican republic":"do","ecuador":"ec","egypt":"eg","el salvador":"sv","equatorial guinea":"gq","eritrea":"er","estonia":"ee","eswatini":"sz","ethiopia":"et","falkland islands (malvinas)":"fk","faroe islands":"fo","fiji":"fj","finland":"fi","france":"fr","french guiana":"gf","french polynesia":"pf","french southern territories":"tf","gabon":"ga","gambia":"gm","georgia":"ge","germany":"de","ghana":"gh","gibraltar":"gi","greece":"gr","greenland":"gl","grenada":"gd","guadeloupe":"gp","guam":"gu","guatemala":"gt","guernsey":"gg","guinea":"gn","guinea-bissau":"gw","guyana":"gy","haiti":"ht","heard island and mcdonald islands":"hm","holy see (vatican city state)":"va","honduras":"hn","hong kong":"hk","hungary":"hu","iceland":"is","india":"in","indonesia":"id","iran":"ir","iraq":"iq","ireland":"ie","isle of man":"im","israel":"il","italy":"it","jamaica":"jm","japan":"jp","jersey":"je","jordan":"jo","kazakhstan":"kz","kenya":"ke","kiribati":"ki","kuwait":"kw","kyrgyzstan":"kg","laos":"la","latvia":"lv","lebanon":"lb","lesotho":"ls","liberia":"lr","libya":"ly","liechtenstein":"li","lithuania":"lt","luxembourg":"lu","macao":"mo","madagascar":"mg","malawi":"mw","malaysia":"my","maldives":"mv","mali":"ml","malta":"mt","marshall islands":"mh","martinique":"mq","mauritania":"mr","mauritius":"mu","mayotte":"yt","mexico":"mx","micronesia, federated states of":"fm","moldova":"md","monaco":"mc","mongolia":"mn","montenegro":"me","montserrat":"ms","morocco":"ma","mozambique":"mz","myanmar":"mm","namibia":"na","nauru":"nr","nepal":"np","netherlands":"nl","new caledonia":"nc","new zealand":"nz","nicaragua":"ni","niger":"ne","nigeria":"ng","niue":"nu","norfolk island":"nf","north korea":"kp","north macedonia":"mk","northern mariana islands":"mp","norway":"no","oman":"om","pakistan":"pk","palau":"pw","palestine, state of":"ps","panama":"pa","papua new guinea":"pg","paraguay":"py","peru":"pe","philippines":"ph","pitcairn":"pn","poland":"pl","portugal":"pt","puerto rico":"pr","qatar":"qa","romania":"ro","russian federation":"ru","rwanda":"rw","réunion":"re","saint barthélemy":"bl","saint helena, ascension and tristan da cunha":"sh","saint kitts and nevis":"kn","saint lucia":"lc","saint martin (french part)":"mf","saint pierre and miquelon":"pm","saint vincent and the grenadines":"vc","samoa":"ws","san marino":"sm","sao tome and principe":"st","saudi arabia":"sa","senegal":"sn","serbia":"rs","seychelles":"sc","sierra leone":"sl","singapore":"sg","sint maarten (dutch part)":"sx","slovakia":"sk","slovenia":"si","solomon islands":"sb","somalia":"so","south africa":"za","south georgia and the south sandwich islands":"gs","south korea":"kr","south sudan":"ss","spain":"es","sri lanka":"lk","sudan":"sd","suriname":"sr","svalbard and jan mayen":"sj","sweden":"se","switzerland":"ch","syria":"sy","taiwan":"tw","tajikistan":"tj","tanzania":"tz","thailand":"th","timor-leste":"tl","togo":"tg","tokelau":"tk","tonga":"to","trinidad and tobago":"tt","tunisia":"tn","turkmenistan":"tm","turks and caicos islands":"tc","tuvalu":"tv","türkiye":"tr","uganda":"ug","ukraine":"ua","united arab emirates":"ae","united kingdom":"gb","united states":"us","united states minor outlying islands":"um","uruguay":"uy","uzbekistan":"uz","vanuatu":"vu","venezuela":"ve","vietnam":"vn","virgin islands, british":"vg","virgin islands, u.s.":"vi","wallis and futuna":"wf","western sahara":"eh","yemen":"ye","zambia":"zm","zimbabwe":"zw","åland islands":"ax"},"kmap":{"de":{"console":"qwertz/de-latin1-nodeadkeys.kmap.gz","kvm":"de","name":"German","x11":"de","x11var":"nodeadkeys"},"de-ch":{"console":"qwertz/sg-latin1.kmap.gz","kvm":"de-ch","name":"Swiss-German","x11":"ch","x11var":"de_nodeadkeys"},"dk":{"console":"qwerty/dk-latin1.kmap.gz","kvm":"da","name":"Danish","x11":"dk","x11var":"nodeadkeys"},"en-gb":{"console":"qwerty/uk.kmap.gz","kvm":"en-gb","name":"United Kingdom","x11":"gb","x11var":""},"en-us":{"console":"qwerty/us-latin1.kmap.gz","kvm":"en-us","name":"U.S. English","x11":"us","x11var":""},"es":{"console":"qwerty/es.kmap.gz","kvm":"es","name":"Spanish","x11":"es","x11var":"nodeadkeys"},"fi":{"console":"qwerty/fi-latin1.kmap.gz","kvm":"fi","name":"Finnish","x11":"fi","x11var":"nodeadkeys"},"fr":{"console":"azerty/fr-latin1.kmap.gz","kvm":"fr","name":"French","x11":"fr","x11var":"nodeadkeys"},"fr-be":{"console":"azerty/be2-latin1.kmap.gz","kvm":"fr-be","name":"Belgium-French","x11":"be","x11var":"nodeadkeys"},"fr-ca":{"console":"qwerty/cf.kmap.gz","kvm":"fr-ca","name":"Canada-French","x11":"ca","x11var":"fr-legacy"},"fr-ch":{"console":"qwertz/fr_CH-latin1.kmap.gz","kvm":"fr-ch","name":"Swiss-French","x11":"ch","x11var":"fr_nodeadkeys"},"hu":{"console":"qwertz/hu.kmap.gz","kvm":"hu","name":"Hungarian","x11":"hu","x11var":""},"is":{"console":"qwerty/is-latin1.kmap.gz","kvm":"is","name":"Icelandic","x11":"is","x11var":"nodeadkeys"},"it":{"console":"qwerty/it2.kmap.gz","kvm":"it","name":"Italian","x11":"it","x11var":"nodeadkeys"},"jp":{"console":"qwerty/jp106.kmap.gz","kvm":"ja","name":"Japanese","x11":"jp","x11var":""},"lt":{"console":"qwerty/lt.kmap.gz","kvm":"lt","name":"Lithuanian","x11":"lt","x11var":"std"},"mk":{"console":"qwerty/mk.kmap.gz","kvm":"mk","name":"Macedonian","x11":"mk","x11var":"nodeadkeys"},"nl":{"console":"qwerty/nl.kmap.gz","kvm":"nl","name":"Dutch","x11":"nl","x11var":""},"no":{"console":"qwerty/no-latin1.kmap.gz","kvm":"no","name":"Norwegian","x11":"no","x11var":"nodeadkeys"},"pl":{"console":"qwerty/pl.kmap.gz","kvm":"pl","name":"Polish","x11":"pl","x11var":""},"pt":{"console":"qwerty/pt-latin1.kmap.gz","kvm":"pt","name":"Portuguese","x11":"pt","x11var":"nodeadkeys"},"pt-br":{"console":"qwerty/br-latin1.kmap.gz","kvm":"pt-br","name":"Brazil-Portuguese","x11":"br","x11var":"nodeadkeys"},"se":{"console":"qwerty/se-latin1.kmap.gz","kvm":"sv","name":"Swedish","x11":"se","x11var":"nodeadkeys"},"si":{"console":"qwertz/slovene.kmap.gz","kvm":"sl","name":"Slovenian","x11":"si","x11var":""},"tr":{"console":"qwerty/trq.kmap.gz","kvm":"tr","name":"Turkish","x11":"tr","x11var":""}},"kmaphash":{"Belgium-French":"fr-be","Brazil-Portuguese":"pt-br","Canada-French":"fr-ca","Danish":"dk","Dutch":"nl","Finnish":"fi","French":"fr","German":"de","Hungarian":"hu","Icelandic":"is","Italian":"it","Japanese":"jp","Lithuanian":"lt","Macedonian":"mk","Norwegian":"no","Polish":"pl","Portuguese":"pt","Slovenian":"si","Spanish":"es","Swedish":"se","Swiss-French":"fr-ch","Swiss-German":"de-ch","Turkish":"tr","U.S. English":"en-us","United Kingdom":"en-gb"},"zones":{"Africa/Abidjan":1,"Africa/Accra":1,"Africa/Addis_Ababa":1,"Africa/Algiers":1,"Africa/Asmara":1,"Africa/Bamako":1,"Africa/Bangui":1,"Africa/Banjul":1,"Africa/Bissau":1,"Africa/Blantyre":1,"Africa/Brazzaville":1,"Africa/Bujumbura":1,"Africa/Cairo":1,"Africa/Casablanca":1,"Africa/Ceuta":1,"Africa/Conakry":1,"Africa/Dakar":1,"Africa/Dar_es_Salaam":1,"Africa/Djibouti":1,"Africa/Douala":1,"Africa/El_Aaiun":1,"Africa/Freetown":1,"Africa/Gaborone":1,"Africa/Harare":1,"Africa/Johannesburg":1,"Africa/Juba":1,"Africa/Kampala":1,"Africa/Khartoum":1,"Africa/Kigali":1,"Africa/Kinshasa":1,"Africa/Lagos":1,"Africa/Libreville":1,"Africa/Lome":1,"Africa/Luanda":1,"Africa/Lubumbashi":1,"Africa/Lusaka":1,"Africa/Malabo":1,"Africa/Maputo":1,"Africa/Maseru":1,"Africa/Mbabane":1,"Africa/Mogadishu":1,"Africa/Monrovia":1,"Africa/Nairobi":1,"Africa/Ndjamena":1,"Africa/Niamey":1,"Africa/Nouakchott":1,"Africa/Ouagadougou":1,"Africa/Porto-Novo":1,"Africa/Sao_Tome":1,"Africa/Tripoli":1,"Africa/Tunis":1,"Africa/Windhoek":1,"America/Adak":1,"America/Anchorage":1,"America/Anguilla":1,"America/Antigua":1,"America/Araguaina":1,"America/Argentina/Buenos_Aires":1,"America/Argentina/Catamarca":1,"America/Argentina/Cordoba":1,"America/Argentina/Jujuy":1,"America/Argentina/La_Rioja":1,"America/Argentina/Mendoza":1,"America/Argentina/Rio_Gallegos":1,"America/Argentina/Salta":1,"America/Argentina/San_Juan":1,"America/Argentina/San_Luis":1,"America/Argentina/Tucuman":1,"America/Argentina/Ushuaia":1,"America/Aruba":1,"America/Asuncion":1,"America/Atikokan":1,"America/Bahia":1,"America/Bahia_Banderas":1,"America/Barbados":1,"America/Belem":1,"America/Belize":1,"America/Blanc-Sablon":1,"America/Boa_Vista":1,"America/Bogota":1,"America/Boise":1,"America/Cambridge_Bay":1,"America/Campo_Grande":1,"America/Cancun":1,"America/Caracas":1,"America/Cayenne":1,"America/Cayman":1,"America/Chicago":1,"America/Chihuahua":1,"America/Ciudad_Juarez":1,"America/Costa_Rica":1,"America/Creston":1,"America/Cuiaba":1,"America/Curacao":1,"America/Danmarkshavn":1,"America/Dawson":1,"America/Dawson_Creek":1,"America/Denver":1,"America/Detroit":1,"America/Dominica":1,"America/Edmonton":1,"America/Eirunepe":1,"America/El_Salvador":1,"America/Fort_Nelson":1,"America/Fortaleza":1,"America/Glace_Bay":1,"America/Goose_Bay":1,"America/Grand_Turk":1,"America/Grenada":1,"America/Guadeloupe":1,"America/Guatemala":1,"America/Guayaquil":1,"America/Guyana":1,"America/Halifax":1,"America/Havana":1,"America/Hermosillo":1,"America/Indiana/Indianapolis":1,"America/Indiana/Knox":1,"America/Indiana/Marengo":1,"America/Indiana/Petersburg":1,"America/Indiana/Tell_City":1,"America/Indiana/Vevay":1,"America/Indiana/Vincennes":1,"America/Indiana/Winamac":1,"America/Inuvik":1,"America/Iqaluit":1,"America/Jamaica":1,"America/Juneau":1,"America/Kentucky/Louisville":1,"America/Kentucky/Monticello":1,"America/Kralendijk":1,"America/La_Paz":1,"America/Lima":1,"America/Los_Angeles":1,"America/Lower_Princes":1,"America/Maceio":1,"America/Managua":1,"America/Manaus":1,"America/Marigot":1,"America/Martinique":1,"America/Matamoros":1,"America/Mazatlan":1,"America/Menominee":1,"America/Merida":1,"America/Metlakatla":1,"America/Mexico_City":1,"America/Miquelon":1,"America/Moncton":1,"America/Monterrey":1,"America/Montevideo":1,"America/Montserrat":1,"America/Nassau":1,"America/New_York":1,"America/Nome":1,"America/Noronha":1,"America/North_Dakota/Beulah":1,"America/North_Dakota/Center":1,"America/North_Dakota/New_Salem":1,"America/Nuuk":1,"America/Ojinaga":1,"America/Panama":1,"America/Paramaribo":1,"America/Phoenix":1,"America/Port-au-Prince":1,"America/Port_of_Spain":1,"America/Porto_Velho":1,"America/Puerto_Rico":1,"America/Punta_Arenas":1,"America/Rankin_Inlet":1,"America/Recife":1,"America/Regina":1,"America/Resolute":1,"America/Rio_Branco":1,"America/Santarem":1,"America/Santiago":1,"America/Santo_Domingo":1,"America/Sao_Paulo":1,"America/Scoresbysund":1,"America/Sitka":1,"America/St_Barthelemy":1,"America/St_Johns":1,"America/St_Kitts":1,"America/St_Lucia":1,"America/St_Thomas":1,"America/St_Vincent":1,"America/Swift_Current":1,"America/Tegucigalpa":1,"America/Thule":1,"America/Tijuana":1,"America/Toronto":1,"America/Tortola":1,"America/Vancouver":1,"America/Whitehorse":1,"America/Winnipeg":1,"America/Yakutat":1,"Antarctica/Casey":1,"Antarctica/Davis":1,"Antarctica/DumontDUrville":1,"Antarctica/Macquarie":1,"Antarctica/Mawson":1,"Antarctica/McMurdo":1,"Antarctica/Palmer":1,"Antarctica/Rothera":1,"Antarctica/Syowa":1,"Antarctica/Troll":1,"Antarctica/Vostok":1,"Arctic/Longyearbyen":1,"Asia/Aden":1,"Asia/Almaty":1,"Asia/Amman":1,"Asia/Anadyr":1,"Asia/Aqtau":1,"Asia/Aqtobe":1,"Asia/Ashgabat":1,"Asia/Atyrau":1,"Asia/Baghdad":1,"Asia/Bahrain":1,"Asia/Baku":1,"Asia/Bangkok":1,"Asia/Barnaul":1,"Asia/Beirut":1,"Asia/Bishkek":1,"Asia/Brunei":1,"Asia/Chita":1,"Asia/Choibalsan":1,"Asia/Colombo":1,"Asia/Damascus":1,"Asia/Dhaka":1,"Asia/Dili":1,"Asia/Dubai":1,"Asia/Dushanbe":1,"Asia/Famagusta":1,"Asia/Gaza":1,"Asia/Hebron":1,"Asia/Ho_Chi_Minh":1,"Asia/Hong_Kong":1,"Asia/Hovd":1,"Asia/Irkutsk":1,"Asia/Jakarta":1,"Asia/Jayapura":1,"Asia/Jerusalem":1,"Asia/Kabul":1,"Asia/Kamchatka":1,"Asia/Karachi":1,"Asia/Kathmandu":1,"Asia/Khandyga":1,"Asia/Kolkata":1,"Asia/Krasnoyarsk":1,"Asia/Kuala_Lumpur":1,"Asia/Kuching":1,"Asia/Kuwait":1,"Asia/Macau":1,"Asia/Magadan":1,"Asia/Makassar":1,"Asia/Manila":1,"Asia/Muscat":1,"Asia/Nicosia":1,"Asia/Novokuznetsk":1,"Asia/Novosibirsk":1,"Asia/Omsk":1,"Asia/Oral":1,"Asia/Phnom_Penh":1,"Asia/Pontianak":1,"Asia/Pyongyang":1,"Asia/Qatar":1,"Asia/Qostanay":1,"Asia/Qyzylorda":1,"Asia/Riyadh":1,"Asia/Sakhalin":1,"Asia/Samarkand":1,"Asia/Seoul":1,"Asia/Shanghai":1,"Asia/Singapore":1,"Asia/Srednekolymsk":1,"Asia/Taipei":1,"Asia/Tashkent":1,"Asia/Tbilisi":1,"Asia/Tehran":1,"Asia/Thimphu":1,"Asia/Tokyo":1,"Asia/Tomsk":1,"Asia/Ulaanbaatar":1,"Asia/Urumqi":1,"Asia/Ust-Nera":1,"Asia/Vientiane":1,"Asia/Vladivostok":1,"Asia/Yakutsk":1,"Asia/Yangon":1,"Asia/Yekaterinburg":1,"Asia/Yerevan":1,"Atlantic/Azores":1,"Atlantic/Bermuda":1,"Atlantic/Canary":1,"Atlantic/Cape_Verde":1,"Atlantic/Faroe":1,"Atlantic/Madeira":1,"Atlantic/Reykjavik":1,"Atlantic/South_Georgia":1,"Atlantic/St_Helena":1,"Atlantic/Stanley":1,"Australia/Adelaide":1,"Australia/Brisbane":1,"Australia/Broken_Hill":1,"Australia/Darwin":1,"Australia/Eucla":1,"Australia/Hobart":1,"Australia/Lindeman":1,"Australia/Lord_Howe":1,"Australia/Melbourne":1,"Australia/Perth":1,"Australia/Sydney":1,"Europe/Amsterdam":1,"Europe/Andorra":1,"Europe/Astrakhan":1,"Europe/Athens":1,"Europe/Belgrade":1,"Europe/Berlin":1,"Europe/Bratislava":1,"Europe/Brussels":1,"Europe/Bucharest":1,"Europe/Budapest":1,"Europe/Busingen":1,"Europe/Chisinau":1,"Europe/Copenhagen":1,"Europe/Dublin":1,"Europe/Gibraltar":1,"Europe/Guernsey":1,"Europe/Helsinki":1,"Europe/Isle_of_Man":1,"Europe/Istanbul":1,"Europe/Jersey":1,"Europe/Kaliningrad":1,"Europe/Kirov":1,"Europe/Kyiv":1,"Europe/Lisbon":1,"Europe/Ljubljana":1,"Europe/London":1,"Europe/Luxembourg":1,"Europe/Madrid":1,"Europe/Malta":1,"Europe/Mariehamn":1,"Europe/Minsk":1,"Europe/Monaco":1,"Europe/Moscow":1,"Europe/Oslo":1,"Europe/Paris":1,"Europe/Podgorica":1,"Europe/Prague":1,"Europe/Riga":1,"Europe/Rome":1,"Europe/Samara":1,"Europe/San_Marino":1,"Europe/Sarajevo":1,"Europe/Saratov":1,"Europe/Simferopol":1,"Europe/Skopje":1,"Europe/Sofia":1,"Europe/Stockholm":1,"Europe/Tallinn":1,"Europe/Tirane":1,"Europe/Ulyanovsk":1,"Europe/Vaduz":1,"Europe/Vatican":1,"Europe/Vienna":1,"Europe/Vilnius":1,"Europe/Volgograd":1,"Europe/Warsaw":1,"Europe/Zagreb":1,"Europe/Zurich":1,"Indian/Antananarivo":1,"Indian/Chagos":1,"Indian/Christmas":1,"Indian/Cocos":1,"Indian/Comoro":1,"Indian/Kerguelen":1,"Indian/Mahe":1,"Indian/Maldives":1,"Indian/Mauritius":1,"Indian/Mayotte":1,"Indian/Reunion":1,"Pacific/Apia":1,"Pacific/Auckland":1,"Pacific/Bougainville":1,"Pacific/Chatham":1,"Pacific/Chuuk":1,"Pacific/Easter":1,"Pacific/Efate":1,"Pacific/Fakaofo":1,"Pacific/Fiji":1,"Pacific/Funafuti":1,"Pacific/Galapagos":1,"Pacific/Gambier":1,"Pacific/Guadalcanal":1,"Pacific/Guam":1,"Pacific/Honolulu":1,"Pacific/Kanton":1,"Pacific/Kiritimati":1,"Pacific/Kosrae":1,"Pacific/Kwajalein":1,"Pacific/Majuro":1,"Pacific/Marquesas":1,"Pacific/Midway":1,"Pacific/Nauru":1,"Pacific/Niue":1,"Pacific/Norfolk":1,"Pacific/Noumea":1,"Pacific/Pago_Pago":1,"Pacific/Palau":1,"Pacific/Pitcairn":1,"Pacific/Pohnpei":1,"Pacific/Port_Moresby":1,"Pacific/Rarotonga":1,"Pacific/Saipan":1,"Pacific/Tahiti":1,"Pacific/Tarawa":1,"Pacific/Tongatapu":1,"Pacific/Wake":1,"Pacific/Wallis":1}}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/disk_match.json b/proxmox-auto-installer/tests/resources/parse_answer/disk_match.json
new file mode 100644
index 0000000..f228b1e
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/disk_match.json
@@ -0,0 +1,29 @@
+{
+ "autoreboot": 1,
+ "cidr": "192.168.1.114/24",
+ "country": "at",
+ "dns": "192.168.1.254",
+ "domain": "testinstall",
+ "disk_selection": {
+ "6": "6",
+ "7": "7",
+ "8": "8",
+ "9": "9"
+ },
+ "filesys": "zfs (RAID10)",
+ "gateway": "192.168.1.1",
+ "hdsize": 223.57088470458984,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "eno1",
+ "password": "123456",
+ "timezone": "Europe/Vienna",
+ "zfs_opts": {
+ "arc_max": 2048,
+ "ashift": 12,
+ "checksum": "on",
+ "compress": "on",
+ "copies": 1
+ }
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/disk_match.toml b/proxmox-auto-installer/tests/resources/parse_answer/disk_match.toml
new file mode 100644
index 0000000..796ccc6
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/disk_match.toml
@@ -0,0 +1,14 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = true
+
+[disks]
+filesystem = "zfs-raid10"
+filter.ID_SERIAL = "*MZ7KM240HAGR*"
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.json b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.json
new file mode 100644
index 0000000..2990922
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.json
@@ -0,0 +1,26 @@
+{
+ "autoreboot": 1,
+ "cidr": "192.168.1.114/24",
+ "country": "at",
+ "dns": "192.168.1.254",
+ "domain": "testinstall",
+ "disk_selection": {
+ "9": "9"
+ },
+ "filesys": "zfs (RAID0)",
+ "gateway": "192.168.1.1",
+ "hdsize": 223.57088470458984,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "eno1",
+ "password": "123456",
+ "timezone": "Europe/Vienna",
+ "zfs_opts": {
+ "arc_max": 2048,
+ "ashift": 12,
+ "checksum": "on",
+ "compress": "on",
+ "copies": 1
+ }
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.toml b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.toml
new file mode 100644
index 0000000..5171153
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.toml
@@ -0,0 +1,16 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = true
+
+[disks]
+filesystem = "zfs-raid0"
+filter_match = "all"
+filter.ID_SERIAL = "*MZ7KM240HAGR*"
+filter.ID_SERIAL_SHORT = "S2HRNX0J403419"
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.json b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.json
new file mode 100644
index 0000000..8c22300
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.json
@@ -0,0 +1,33 @@
+{
+ "autoreboot": 1,
+ "cidr": "192.168.1.114/24",
+ "country": "at",
+ "dns": "192.168.1.254",
+ "domain": "testinstall",
+ "disk_selection": {
+ "0": "0",
+ "1": "1",
+ "2": "2",
+ "3": "3",
+ "6": "6",
+ "7": "7",
+ "8": "8",
+ "9": "9"
+ },
+ "filesys": "zfs (RAID10)",
+ "gateway": "192.168.1.1",
+ "hdsize": 2980.820640563965,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "eno1",
+ "password": "123456",
+ "timezone": "Europe/Vienna",
+ "zfs_opts": {
+ "arc_max": 2048,
+ "ashift": 12,
+ "checksum": "on",
+ "compress": "on",
+ "copies": 1
+ }
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.toml b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.toml
new file mode 100644
index 0000000..df6c88c
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.toml
@@ -0,0 +1,16 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = true
+
+[disks]
+filesystem = "zfs-raid10"
+filter_match = "any"
+filter.ID_SERIAL = "*MZ7KM240HAGR*"
+filter.ID_MODEL = "Micron_9300*"
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/minimal.json b/proxmox-auto-installer/tests/resources/parse_answer/minimal.json
new file mode 100644
index 0000000..9021377
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/minimal.json
@@ -0,0 +1,17 @@
+{
+ "autoreboot": 1,
+ "cidr": "192.168.1.114/24",
+ "country": "at",
+ "dns": "192.168.1.254",
+ "domain": "testinstall",
+ "filesys": "ext4",
+ "gateway": "192.168.1.1",
+ "hdsize": 223.57088470458984,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "eno1",
+ "password": "123456",
+ "target_hd": "/dev/sda",
+ "timezone": "Europe/Vienna"
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/minimal.toml b/proxmox-auto-installer/tests/resources/parse_answer/minimal.toml
new file mode 100644
index 0000000..a417c00
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/minimal.toml
@@ -0,0 +1,14 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = true
+
+[disks]
+filesystem = "ext4"
+disk_selection = ["sda"]
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/nic_matching.json b/proxmox-auto-installer/tests/resources/parse_answer/nic_matching.json
new file mode 100644
index 0000000..6f31079
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/nic_matching.json
@@ -0,0 +1,17 @@
+{
+ "autoreboot": 1,
+ "cidr": "10.10.10.10/24",
+ "country": "at",
+ "dns": "10.10.10.1",
+ "domain": "testinstall",
+ "filesys": "ext4",
+ "gateway": "10.10.10.1",
+ "hdsize": 223.57088470458984,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "enp65s0f0",
+ "password": "123456",
+ "target_hd": "/dev/sda",
+ "timezone": "Europe/Vienna"
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/nic_matching.toml b/proxmox-auto-installer/tests/resources/parse_answer/nic_matching.toml
new file mode 100644
index 0000000..10e21d2
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/nic_matching.toml
@@ -0,0 +1,19 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = false
+cidr = "10.10.10.10/24"
+dns = "10.10.10.1"
+gateway = "10.10.10.1"
+filter.ID_NET_NAME_MAC = "*a0369f0ab382"
+
+
+[disks]
+filesystem = "ext4"
+disk_selection = ["sda"]
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/readme b/proxmox-auto-installer/tests/resources/parse_answer/readme
new file mode 100644
index 0000000..6ce77ae
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/readme
@@ -0,0 +1,4 @@
+the size parameter from /sys/block/{disk}/size is the number of blocks.
+
+to calculate the size as the low level installer needs it:
+size * 512 / 1024 / 1024 / 1024 with 14 digits after the comma
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/specific_nic.json b/proxmox-auto-installer/tests/resources/parse_answer/specific_nic.json
new file mode 100644
index 0000000..515cc89
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/specific_nic.json
@@ -0,0 +1,17 @@
+{
+ "autoreboot": 1,
+ "cidr": "10.10.10.10/24",
+ "country": "at",
+ "dns": "10.10.10.1",
+ "domain": "testinstall",
+ "filesys": "ext4",
+ "gateway": "10.10.10.1",
+ "hdsize": 223.57088470458984,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "enp129s0f1np1",
+ "password": "123456",
+ "target_hd": "/dev/sda",
+ "timezone": "Europe/Vienna"
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/specific_nic.toml b/proxmox-auto-installer/tests/resources/parse_answer/specific_nic.toml
new file mode 100644
index 0000000..60c08b4
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/specific_nic.toml
@@ -0,0 +1,19 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = false
+cidr = "10.10.10.10/24"
+dns = "10.10.10.1"
+gateway = "10.10.10.1"
+filter.ID_NET_NAME = "enp129s0f1np1"
+
+
+[disks]
+filesystem = "ext4"
+disk_selection = ["sda"]
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/zfs.json b/proxmox-auto-installer/tests/resources/parse_answer/zfs.json
new file mode 100644
index 0000000..c29a303
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/zfs.json
@@ -0,0 +1,27 @@
+{
+ "autoreboot": 1,
+ "cidr": "192.168.1.114/24",
+ "country": "at",
+ "dns": "192.168.1.254",
+ "domain": "testinstall",
+ "disk_selection": {
+ "6": "6",
+ "7": "7"
+ },
+ "filesys": "zfs (RAID1)",
+ "gateway": "192.168.1.1",
+ "hdsize": 80.0,
+ "hostname": "pveauto",
+ "keymap": "de",
+ "mailto": "mail@no.invalid",
+ "mngmt_nic": "eno1",
+ "password": "123456",
+ "timezone": "Europe/Vienna",
+ "zfs_opts": {
+ "arc_max": 2048,
+ "ashift": 12,
+ "checksum": "on",
+ "compress": "lz4",
+ "copies": 2
+ }
+}
diff --git a/proxmox-auto-installer/tests/resources/parse_answer/zfs.toml b/proxmox-auto-installer/tests/resources/parse_answer/zfs.toml
new file mode 100644
index 0000000..2032c0a
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/parse_answer/zfs.toml
@@ -0,0 +1,19 @@
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pveauto.testinstall"
+mailto = "mail@no.invalid"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = true
+
+[disks]
+filesystem = "zfs-raid1"
+disk_selection = ["sda", "sdb"]
+zfs.ashift = 12
+zfs.checksum = "on"
+zfs.compress = "lz4"
+zfs.copies = 2
+zfs.hdsize = 80
diff --git a/proxmox-auto-installer/tests/resources/run-env-info.json b/proxmox-auto-installer/tests/resources/run-env-info.json
new file mode 100644
index 0000000..6762470
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/run-env-info.json
@@ -0,0 +1 @@
+{"boot_type":"efi","country":"at","disks":[[0,"/dev/nvme0n1",6251233968,"Micron_9300_MTFDHAL3T2TDR",4096,"/sys/block/nvme0n1"],[1,"/dev/nvme1n1",6251233968,"Micron_9300_MTFDHAL3T2TDR",4096,"/sys/block/nvme1n1"],[2,"/dev/nvme2n1",6251233968,"Micron_9300_MTFDHAL3T2TDR",4096,"/sys/block/nvme2n1"],[3,"/dev/nvme3n1",6251233968,"Micron_9300_MTFDHAL3T2TDR",4096,"/sys/block/nvme3n1"],[4,"/dev/nvme4n1",976773168,"Samsung SSD 970 EVO Plus 500GB",512,"/sys/block/nvme4n1"],[5,"/dev/nvme5n1",732585168,"INTEL SSDPED1K375GA",512,"/sys/block/nvme5n1"],[6,"/dev/sda",468862128,"SAMSUNG MZ7KM240",512,"/sys/block/sda"],[7,"/dev/sdb",468862128,"SAMSUNG MZ7KM240",512,"/sys/block/sdb"],[8,"/dev/sdc",468862128,"SAMSUNG MZ7KM240",512,"/sys/block/sdc"],[9,"/dev/sdd",468862128,"SAMSUNG MZ7KM240",512,"/sys/block/sdd"]],"hvm_supported":1,"ipconf":{"default":"4","dnsserver":"192.168.1.254","domain":null,"gateway":"192.168.1.1","ifaces":{"10":{"driver":"mlx5_core","flags":"NO-CARRIER,BROADCAST,MULTICAST,UP","mac":"24:8a:07:1e:05:bd","name":"enp193s0f1np1","state":"DOWN"},"2":{"driver":"igb","flags":"NO-CARRIER,BROADCAST,MULTICAST,UP","mac":"a0:36:9f:0a:b3:82","name":"enp65s0f0","state":"DOWN"},"3":{"driver":"igb","flags":"NO-CARRIER,BROADCAST,MULTICAST,UP","mac":"a0:36:9f:0a:b3:83","name":"enp65s0f1","state":"DOWN"},"4":{"driver":"igb","flags":"BROADCAST,MULTICAST,UP,LOWER_UP","inet":{"addr":"192.168.1.114","mask":"255.255.240.0","prefix":20},"mac":"b4:2e:99:ac:ad:b4","name":"eno1","state":"UP"},"5":{"driver":"cdc_ether","flags":"BROADCAST,MULTICAST,UP,LOWER_UP","mac":"5a:47:32:dd:c7:47","name":"enx5a4732ddc747","state":"UNKNOWN"},"6":{"driver":"igb","flags":"BROADCAST,MULTICAST,UP,LOWER_UP","mac":"b4:2e:99:ac:ad:b5","name":"eno2","state":"UP"},"7":{"driver":"mlx5_core","flags":"NO-CARRIER,BROADCAST,MULTICAST,UP","mac":"1c:34:da:5c:5e:24","name":"enp129s0f0np0","state":"DOWN"},"8":{"driver":"mlx5_core","flags":"NO-CARRIER,BROADCAST,MULTICAST,UP","mac":"1c:34:da:5c:5e:25","name":"enp129s0f1np1","state":"DOWN"},"9":{"driver":"mlx5_core","flags":"BROADCAST,MULTICAST,UP,LOWER_UP","mac":"24:8a:07:1e:05:bc","name":"enp193s0f0np0","state":"UP"}}},"kernel_cmdline":"BOOT_IMAGE=/boot/linux26 ro ramdisk_size=16777216 rw splash=verbose proxdebug vga=788","network":{"dns":{"dns":["192.168.1.254"],"domain":null},"interfaces":{"eno1":{"addresses":[{"address":"192.168.1.114","family":"inet","prefix":24}],"index":4,"mac":"b4:2e:99:ac:ad:b4","name":"eno1","state":"UP"},"eno2":{"index":6,"mac":"b4:2e:99:ac:ad:b5","name":"eno2","state":"UP"},"enp129s0f0np0":{"index":7,"mac":"1c:34:da:5c:5e:24","name":"enp129s0f0np0","state":"DOWN"},"enp129s0f1np1":{"index":8,"mac":"1c:34:da:5c:5e:25","name":"enp129s0f1np1","state":"DOWN"},"enp193s0f0np0":{"index":9,"mac":"24:8a:07:1e:05:bc","name":"enp193s0f0np0","state":"UP"},"enp193s0f1np1":{"index":10,"mac":"24:8a:07:1e:05:bd","name":"enp193s0f1np1","state":"DOWN"},"enp65s0f0":{"index":2,"mac":"a0:36:9f:0a:b3:82","name":"enp65s0f0","state":"DOWN"},"enp65s0f1":{"index":3,"mac":"a0:36:9f:0a:b3:83","name":"enp65s0f1","state":"DOWN"},"enx5a4732ddc747":{"index":5,"mac":"5a:47:32:dd:c7:47","name":"enx5a4732ddc747","state":"UNKNOWN"}},"routes":{"gateway4":{"dev":"eno1","gateway":"192.168.1.1"}}},"total_memory":257597}
diff --git a/proxmox-auto-installer/tests/resources/run-env-udev.json b/proxmox-auto-installer/tests/resources/run-env-udev.json
new file mode 100644
index 0000000..4fe1f30
--- /dev/null
+++ b/proxmox-auto-installer/tests/resources/run-env-udev.json
@@ -0,0 +1 @@
+{"disks":{"0":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-path/pci-0000:01:00.0-nvme-1 /dev/disk/by-id/nvme-Micron_9300_MTFDHAL3T2TDR_19502596FC74 /dev/disk/by-id/lvm-pv-uuid-hl5Cyv-dghE-CcX8-lDCV-6BSj-EbFU-cT4dIP /dev/disk/by-diskseq/16 /dev/disk/by-id/nvme-eui.000000000000001500a075012596fc74","DEVNAME":"/dev/nvme0n1","DEVPATH":"/devices/pci0000:00/0000:00:01.1/0000:01:00.0/nvme/nvme0/nvme0n1","DEVTYPE":"disk","DISKSEQ":"16","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"hl5Cyv-dghE-CcX8-lDCV-6BSj-EbFU-cT4dIP","ID_FS_UUID_ENC":"hl5Cyv-dghE-CcX8-lDCV-6BSj-EbFU-cT4dIP","ID_FS_VERSION":"LVM2 001","ID_MODEL":"Micron_9300_MTFDHAL3T2TDR","ID_PATH":"pci-0000:01:00.0-nvme-1","ID_PATH_TAG":"pci-0000_01_00_0-nvme-1","ID_REVISION":"11300DN0","ID_SERIAL":"Micron_9300_MTFDHAL3T2TDR_19502596FC74","ID_SERIAL_SHORT":"19502596FC74","ID_WWN":"eui.000000000000001500a075012596fc74","LVM_VG_NAME_COMPLETE":"ceph-67f6a633-8bac-4ba6-a54c-40f0d24a9701","MAJOR":"259","MINOR":"6","SUBSYSTEM":"block","SYSTEMD_READY":"1","TAGS":":systemd:","USEC_INITIALIZED":"45215609"},"1":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-path/pci-0000:02:00.0-nvme-1 /dev/disk/by-id/nvme-eui.000000000000001400a0750125de7a16 /dev/disk/by-diskseq/15 /dev/disk/by-id/nvme-Micron_9300_MTFDHAL3T2TDR_195225DE7A16","DEVNAME":"/dev/nvme1n1","DEVPATH":"/devices/pci0000:00/0000:00:01.2/0000:02:00.0/nvme/nvme1/nvme1n1","DEVTYPE":"disk","DISKSEQ":"15","ID_MODEL":"Micron_9300_MTFDHAL3T2TDR","ID_PATH":"pci-0000:02:00.0-nvme-1","ID_PATH_TAG":"pci-0000_02_00_0-nvme-1","ID_REVISION":"11300DN0","ID_SERIAL":"Micron_9300_MTFDHAL3T2TDR_195225DE7A16","ID_SERIAL_SHORT":"195225DE7A16","ID_WWN":"eui.000000000000001400a0750125de7a16","MAJOR":"259","MINOR":"5","SUBSYSTEM":"block","TAGS":":systemd:","USEC_INITIALIZED":"43271971"},"2":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-path/pci-0000:03:00.0-nvme-1 /dev/disk/by-diskseq/17 /dev/disk/by-id/lvm-pv-uuid-b92FQw-lExM-2EYR-5UyV-T6cl-yzsM-qRjCOU /dev/disk/by-id/nvme-Micron_9300_MTFDHAL3T2TDR_1945250F206E /dev/disk/by-id/nvme-eui.000000000000001400a07501250f206e","DEVNAME":"/dev/nvme2n1","DEVPATH":"/devices/pci0000:00/0000:00:01.3/0000:03:00.0/nvme/nvme2/nvme2n1","DEVTYPE":"disk","DISKSEQ":"17","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"b92FQw-lExM-2EYR-5UyV-T6cl-yzsM-qRjCOU","ID_FS_UUID_ENC":"b92FQw-lExM-2EYR-5UyV-T6cl-yzsM-qRjCOU","ID_FS_VERSION":"LVM2 001","ID_MODEL":"Micron_9300_MTFDHAL3T2TDR","ID_PATH":"pci-0000:03:00.0-nvme-1","ID_PATH_TAG":"pci-0000_03_00_0-nvme-1","ID_REVISION":"11300DN0","ID_SERIAL":"Micron_9300_MTFDHAL3T2TDR_1945250F206E","ID_SERIAL_SHORT":"1945250F206E","ID_WWN":"eui.000000000000001400a07501250f206e","LVM_VG_NAME_COMPLETE":"ceph-ee820014-6121-458b-a661-889f0901bff6","MAJOR":"259","MINOR":"7","SUBSYSTEM":"block","SYSTEMD_READY":"1","TAGS":":systemd:","USEC_INITIALIZED":"45218640"},"3":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-path/pci-0000:04:00.0-nvme-1 /dev/disk/by-id/lvm-pv-uuid-f56spY-IptZ-fH5e-AqQv-K1cI-3nnt-2UlO17 /dev/disk/by-id/nvme-Micron_9300_MTFDHAL3T2TDR_1945250F20AC /dev/disk/by-diskseq/18 /dev/disk/by-id/nvme-eui.000000000000001400a07501250f20ac","DEVNAME":"/dev/nvme3n1","DEVPATH":"/devices/pci0000:00/0000:00:01.4/0000:04:00.0/nvme/nvme3/nvme3n1","DEVTYPE":"disk","DISKSEQ":"18","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"f56spY-IptZ-fH5e-AqQv-K1cI-3nnt-2UlO17","ID_FS_UUID_ENC":"f56spY-IptZ-fH5e-AqQv-K1cI-3nnt-2UlO17","ID_FS_VERSION":"LVM2 001","ID_MODEL":"Micron_9300_MTFDHAL3T2TDR","ID_PATH":"pci-0000:04:00.0-nvme-1","ID_PATH_TAG":"pci-0000_04_00_0-nvme-1","ID_REVISION":"11300DN0","ID_SERIAL":"Micron_9300_MTFDHAL3T2TDR_1945250F20AC","ID_SERIAL_SHORT":"1945250F20AC","ID_WWN":"eui.000000000000001400a07501250f20ac","LVM_VG_NAME_COMPLETE":"ceph-2928aceb-9300-4175-8640-e227d897d45e","MAJOR":"259","MINOR":"8","SUBSYSTEM":"block","SYSTEMD_READY":"1","TAGS":":systemd:","USEC_INITIALIZED":"45215244"},"4":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-diskseq/13 /dev/disk/by-path/pci-0000:82:00.0-nvme-1 /dev/disk/by-id/lvm-pv-uuid-jFM6eE-KUmT-fTBO-9SWe-4VJG-W4rW-DUQPRd /dev/disk/by-id/nvme-INTEL_SSDPED1K375GA_PHKS746500DK375AGN /dev/disk/by-id/nvme-nvme.8086-50484b53373436353030444b33373541474e-494e54454c20535344504544314b3337354741-00000001","DEVNAME":"/dev/nvme4n1","DEVPATH":"/devices/pci0000:80/0000:80:03.1/0000:82:00.0/nvme/nvme4/nvme4n1","DEVTYPE":"disk","DISKSEQ":"13","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"jFM6eE-KUmT-fTBO-9SWe-4VJG-W4rW-DUQPRd","ID_FS_UUID_ENC":"jFM6eE-KUmT-fTBO-9SWe-4VJG-W4rW-DUQPRd","ID_FS_VERSION":"LVM2 001","ID_MODEL":"INTEL SSDPED1K375GA","ID_PATH":"pci-0000:82:00.0-nvme-1","ID_PATH_TAG":"pci-0000_82_00_0-nvme-1","ID_REVISION":"E2010435","ID_SERIAL":"INTEL_SSDPED1K375GA_PHKS746500DK375AGN","ID_SERIAL_SHORT":"PHKS746500DK375AGN","ID_WWN":"nvme.8086-50484b53373436353030444b33373541474e-494e54454c20535344504544314b3337354741-00000001","LVM_VG_NAME_COMPLETE":"ceph-b4af8112-88e7-4cd4-9cf9-0f4163ca77bd","MAJOR":"259","MINOR":"0","SUBSYSTEM":"block","SYSTEMD_READY":"1","TAGS":":systemd:","USEC_INITIALIZED":"45219471"},"5":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-id/nvme-eui.0025385791b04175 /dev/disk/by-id/nvme-Samsung_SSD_970_EVO_Plus_500GB_S4EVNF0M703256N /dev/disk/by-path/pci-0000:06:00.0-nvme-1 /dev/disk/by-diskseq/14","DEVNAME":"/dev/nvme5n1","DEVPATH":"/devices/pci0000:00/0000:00:03.3/0000:06:00.0/nvme/nvme5/nvme5n1","DEVTYPE":"disk","DISKSEQ":"14","ID_MODEL":"Samsung SSD 970 EVO Plus 500GB","ID_PART_TABLE_TYPE":"gpt","ID_PART_TABLE_UUID":"1c40cb4b-72d8-49ec-804b-e5933e09423d","ID_PATH":"pci-0000:06:00.0-nvme-1","ID_PATH_TAG":"pci-0000_06_00_0-nvme-1","ID_REVISION":"2B2QEXM7","ID_SERIAL":"Samsung_SSD_970_EVO_Plus_500GB_S4EVNF0M703256N","ID_SERIAL_SHORT":"S4EVNF0M703256N","ID_WWN":"eui.0025385791b04175","MAJOR":"259","MINOR":"1","SUBSYSTEM":"block","TAGS":":systemd:","USEC_INITIALIZED":"43271933"},"6":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-id/lvm-pv-uuid-tMMNAX-noqI-P0oS-9OEJ-7IR5-WoRL-N5K5Cv /dev/disk/by-id/ata-SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403550 /dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy0-lun-0 /dev/disk/by-diskseq/9 /dev/disk/by-id/wwn-0x5002538c405dbf10","DEVNAME":"/dev/sda","DEVPATH":"/devices/pci0000:00/0000:00:03.1/0000:05:00.0/host8/port-8:0/expander-8:0/port-8:0:0/end_device-8:0:0/target8:0:0/8:0:0:0/block/sda","DEVTYPE":"disk","DISKSEQ":"9","ID_ATA":"1","ID_ATA_DOWNLOAD_MICROCODE":"1","ID_ATA_FEATURE_SET_HPA":"1","ID_ATA_FEATURE_SET_HPA_ENABLED":"1","ID_ATA_FEATURE_SET_PM":"1","ID_ATA_FEATURE_SET_PM_ENABLED":"1","ID_ATA_FEATURE_SET_SECURITY":"1","ID_ATA_FEATURE_SET_SECURITY_ENABLED":"0","ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SMART":"1","ID_ATA_FEATURE_SET_SMART_ENABLED":"1","ID_ATA_ROTATION_RATE_RPM":"0","ID_ATA_SATA":"1","ID_ATA_WRITE_CACHE":"1","ID_ATA_WRITE_CACHE_ENABLED":"1","ID_BUS":"ata","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"tMMNAX-noqI-P0oS-9OEJ-7IR5-WoRL-N5K5Cv","ID_FS_UUID_ENC":"tMMNAX-noqI-P0oS-9OEJ-7IR5-WoRL-N5K5Cv","ID_FS_VERSION":"LVM2 001","ID_MODEL":"SAMSUNG_MZ7KM240HAGR-00005","ID_MODEL_ENC":"SAMSUNG\\x20MZ7KM240HAGR-00005\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20","ID_PATH":"pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy0-lun-0","ID_PATH_TAG":"pci-0000_05_00_0-sas-exp0x500304801f3f7f7f-phy0-lun-0","ID_REVISION":"GXM1103Q","ID_SERIAL":"SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403550","ID_SERIAL_SHORT":"S2HRNX0J403550","ID_TYPE":"disk","ID_WWN":"0x5002538c405dbf10","ID_WWN_WITH_EXTENSION":"0x5002538c405dbf10","MAJOR":"8","MINOR":"0","SUBSYSTEM":"block","TAGS":":systemd:","USEC_INITIALIZED":"45234812"},"7":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-id/wwn-0x5002538c405dbce5 /dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy1-lun-0 /dev/disk/by-id/lvm-pv-uuid-oPUG7c-CMh3-oHQy-YRZP-8cNJ-uMIv-ceVPZu /dev/disk/by-diskseq/10 /dev/disk/by-id/ata-SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403335","DEVNAME":"/dev/sdb","DEVPATH":"/devices/pci0000:00/0000:00:03.1/0000:05:00.0/host8/port-8:0/expander-8:0/port-8:0:1/end_device-8:0:1/target8:0:1/8:0:1:0/block/sdb","DEVTYPE":"disk","DISKSEQ":"10","ID_ATA":"1","ID_ATA_DOWNLOAD_MICROCODE":"1","ID_ATA_FEATURE_SET_HPA":"1","ID_ATA_FEATURE_SET_HPA_ENABLED":"1","ID_ATA_FEATURE_SET_PM":"1","ID_ATA_FEATURE_SET_PM_ENABLED":"1","ID_ATA_FEATURE_SET_SECURITY":"1","ID_ATA_FEATURE_SET_SECURITY_ENABLED":"0","ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SMART":"1","ID_ATA_FEATURE_SET_SMART_ENABLED":"1","ID_ATA_ROTATION_RATE_RPM":"0","ID_ATA_SATA":"1","ID_ATA_WRITE_CACHE":"1","ID_ATA_WRITE_CACHE_ENABLED":"1","ID_BUS":"ata","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"oPUG7c-CMh3-oHQy-YRZP-8cNJ-uMIv-ceVPZu","ID_FS_UUID_ENC":"oPUG7c-CMh3-oHQy-YRZP-8cNJ-uMIv-ceVPZu","ID_FS_VERSION":"LVM2 001","ID_MODEL":"SAMSUNG_MZ7KM240HAGR-00005","ID_MODEL_ENC":"SAMSUNG\\x20MZ7KM240HAGR-00005\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20","ID_PATH":"pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy1-lun-0","ID_PATH_TAG":"pci-0000_05_00_0-sas-exp0x500304801f3f7f7f-phy1-lun-0","ID_REVISION":"GXM1103Q","ID_SERIAL":"SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403335","ID_SERIAL_SHORT":"S2HRNX0J403335","ID_TYPE":"disk","ID_WWN":"0x5002538c405dbce5","ID_WWN_WITH_EXTENSION":"0x5002538c405dbce5","MAJOR":"8","MINOR":"16","SUBSYSTEM":"block","TAGS":":systemd:","USEC_INITIALIZED":"45215406"},"8":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-id/wwn-0x5002538c405dbcd9 /dev/disk/by-diskseq/11 /dev/disk/by-id/ata-SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403333 /dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy2-lun-0 /dev/disk/by-id/lvm-pv-uuid-tbguYd-sqom-3Okm-aJ0F-0F8N-2ALl-lo7ONW","DEVNAME":"/dev/sdc","DEVPATH":"/devices/pci0000:00/0000:00:03.1/0000:05:00.0/host8/port-8:0/expander-8:0/port-8:0:2/end_device-8:0:2/target8:0:2/8:0:2:0/block/sdc","DEVTYPE":"disk","DISKSEQ":"11","ID_ATA":"1","ID_ATA_DOWNLOAD_MICROCODE":"1","ID_ATA_FEATURE_SET_HPA":"1","ID_ATA_FEATURE_SET_HPA_ENABLED":"1","ID_ATA_FEATURE_SET_PM":"1","ID_ATA_FEATURE_SET_PM_ENABLED":"1","ID_ATA_FEATURE_SET_SECURITY":"1","ID_ATA_FEATURE_SET_SECURITY_ENABLED":"0","ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SMART":"1","ID_ATA_FEATURE_SET_SMART_ENABLED":"1","ID_ATA_ROTATION_RATE_RPM":"0","ID_ATA_SATA":"1","ID_ATA_WRITE_CACHE":"1","ID_ATA_WRITE_CACHE_ENABLED":"1","ID_BUS":"ata","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"tbguYd-sqom-3Okm-aJ0F-0F8N-2ALl-lo7ONW","ID_FS_UUID_ENC":"tbguYd-sqom-3Okm-aJ0F-0F8N-2ALl-lo7ONW","ID_FS_VERSION":"LVM2 001","ID_MODEL":"SAMSUNG_MZ7KM240HAGR-00005","ID_MODEL_ENC":"SAMSUNG\\x20MZ7KM240HAGR-00005\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20","ID_PATH":"pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy2-lun-0","ID_PATH_TAG":"pci-0000_05_00_0-sas-exp0x500304801f3f7f7f-phy2-lun-0","ID_REVISION":"GXM1103Q","ID_SERIAL":"SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403333","ID_SERIAL_SHORT":"S2HRNX0J403333","ID_TYPE":"disk","ID_WWN":"0x5002538c405dbcd9","ID_WWN_WITH_EXTENSION":"0x5002538c405dbcd9","MAJOR":"8","MINOR":"32","SUBSYSTEM":"block","TAGS":":systemd:","USEC_INITIALIZED":"45198824"},"9":{"CURRENT_TAGS":":systemd:","DEVLINKS":"/dev/disk/by-diskseq/12 /dev/disk/by-id/wwn-0x5002538c405dbdc5 /dev/disk/by-id/lvm-pv-uuid-Lpxa0X-i8MT-EYWV-J7yQ-r5x7-S99u-jLf8bz /dev/disk/by-path/pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy5-lun-0 /dev/disk/by-id/ata-SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403419","DEVNAME":"/dev/sdd","DEVPATH":"/devices/pci0000:00/0000:00:03.1/0000:05:00.0/host8/port-8:0/expander-8:0/port-8:0:3/end_device-8:0:3/target8:0:3/8:0:3:0/block/sdd","DEVTYPE":"disk","DISKSEQ":"12","ID_ATA":"1","ID_ATA_DOWNLOAD_MICROCODE":"1","ID_ATA_FEATURE_SET_HPA":"1","ID_ATA_FEATURE_SET_HPA_ENABLED":"1","ID_ATA_FEATURE_SET_PM":"1","ID_ATA_FEATURE_SET_PM_ENABLED":"1","ID_ATA_FEATURE_SET_SECURITY":"1","ID_ATA_FEATURE_SET_SECURITY_ENABLED":"0","ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN":"32","ID_ATA_FEATURE_SET_SMART":"1","ID_ATA_FEATURE_SET_SMART_ENABLED":"1","ID_ATA_ROTATION_RATE_RPM":"0","ID_ATA_SATA":"1","ID_ATA_WRITE_CACHE":"1","ID_ATA_WRITE_CACHE_ENABLED":"1","ID_BUS":"ata","ID_FS_TYPE":"LVM2_member","ID_FS_USAGE":"raid","ID_FS_UUID":"Lpxa0X-i8MT-EYWV-J7yQ-r5x7-S99u-jLf8bz","ID_FS_UUID_ENC":"Lpxa0X-i8MT-EYWV-J7yQ-r5x7-S99u-jLf8bz","ID_FS_VERSION":"LVM2 001","ID_MODEL":"SAMSUNG_MZ7KM240HAGR-00005","ID_MODEL_ENC":"SAMSUNG\\x20MZ7KM240HAGR-00005\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20\\x20","ID_PATH":"pci-0000:05:00.0-sas-exp0x500304801f3f7f7f-phy5-lun-0","ID_PATH_TAG":"pci-0000_05_00_0-sas-exp0x500304801f3f7f7f-phy5-lun-0","ID_REVISION":"GXM1103Q","ID_SERIAL":"SAMSUNG_MZ7KM240HAGR-00005_S2HRNX0J403419","ID_SERIAL_SHORT":"S2HRNX0J403419","ID_TYPE":"disk","ID_WWN":"0x5002538c405dbdc5","ID_WWN_WITH_EXTENSION":"0x5002538c405dbdc5","MAJOR":"8","MINOR":"48","SUBSYSTEM":"block","TAGS":":systemd:","USEC_INITIALIZED":"45215283"}},"nics":{"eno1":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:c0/0000:c0:03.5/0000:c2:00.0/net/eno1","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"I350 Gigabit Network Connection","ID_MODEL_ID":"0x1521","ID_NET_DRIVER":"igb","ID_NET_LABEL_ONBOARD":"Onboard LAN1","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"eno1","ID_NET_NAME_MAC":"enxb42e99acadb4","ID_NET_NAME_ONBOARD":"eno1","ID_NET_NAME_PATH":"enp194s0f0","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"GIGA-BYTE TECHNOLOGY CO.,LTD.","ID_PATH":"pci-0000:c2:00.0","ID_PATH_TAG":"pci-0000_c2_00_0","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Intel Corporation","ID_VENDOR_ID":"0x8086","IFINDEX":"5","INTERFACE":"eno1","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/eno1","TAGS":":systemd:","USEC_INITIALIZED":"45212091"},"eno2":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:c0/0000:c0:03.5/0000:c2:00.1/net/eno2","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"I350 Gigabit Network Connection","ID_MODEL_ID":"0x1521","ID_NET_DRIVER":"igb","ID_NET_LABEL_ONBOARD":"Onboard LAN2","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"eno2","ID_NET_NAME_MAC":"enxb42e99acadb5","ID_NET_NAME_ONBOARD":"eno2","ID_NET_NAME_PATH":"enp194s0f1","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"GIGA-BYTE TECHNOLOGY CO.,LTD.","ID_PATH":"pci-0000:c2:00.1","ID_PATH_TAG":"pci-0000_c2_00_1","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Intel Corporation","ID_VENDOR_ID":"0x8086","IFINDEX":"6","INTERFACE":"eno2","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/eno2","TAGS":":systemd:","USEC_INITIALIZED":"45128159"},"enp129s0f0np0":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:80/0000:80:01.1/0000:81:00.0/net/enp129s0f0np0","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"MT27710 Family [ConnectX-4 Lx] (MCX4421A-ACQN ConnectX-4 Lx EN OCP,2x25G)","ID_MODEL_ID":"0x1015","ID_NET_DRIVER":"mlx5_core","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"enp129s0f0np0","ID_NET_NAME_MAC":"enx1c34da5c5e24","ID_NET_NAME_PATH":"enp129s0f0np0","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"Mellanox Technologies, Inc.","ID_PATH":"pci-0000:81:00.0","ID_PATH_TAG":"pci-0000_81_00_0","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Mellanox Technologies","ID_VENDOR_ID":"0x15b3","IFINDEX":"7","INTERFACE":"enp129s0f0np0","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/enp129s0f0np0","TAGS":":systemd:","USEC_INITIALIZED":"47752091"},"enp129s0f1np1":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:80/0000:80:01.1/0000:81:00.1/net/enp129s0f1np1","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"MT27710 Family [ConnectX-4 Lx] (MCX4421A-ACQN ConnectX-4 Lx EN OCP,2x25G)","ID_MODEL_ID":"0x1015","ID_NET_DRIVER":"mlx5_core","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"enp129s0f1np1","ID_NET_NAME_MAC":"enx1c34da5c5e25","ID_NET_NAME_PATH":"enp129s0f1np1","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"Mellanox Technologies, Inc.","ID_PATH":"pci-0000:81:00.1","ID_PATH_TAG":"pci-0000_81_00_1","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Mellanox Technologies","ID_VENDOR_ID":"0x15b3","IFINDEX":"8","INTERFACE":"enp129s0f1np1","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/enp129s0f1np1","TAGS":":systemd:","USEC_INITIALIZED":"47716100"},"enp193s0f0np0":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:c0/0000:c0:01.1/0000:c1:00.0/net/enp193s0f0np0","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"MT27700 Family [ConnectX-4]","ID_MODEL_ID":"0x1013","ID_NET_DRIVER":"mlx5_core","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"enp193s0f0np0","ID_NET_NAME_MAC":"enx248a071e05bc","ID_NET_NAME_PATH":"enp193s0f0np0","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"Mellanox Technologies, Inc.","ID_PATH":"pci-0000:c1:00.0","ID_PATH_TAG":"pci-0000_c1_00_0","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Mellanox Technologies","ID_VENDOR_ID":"0x15b3","IFINDEX":"9","INTERFACE":"enp193s0f0np0","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/enp193s0f0np0","TAGS":":systemd:","USEC_INITIALIZED":"47784094"},"enp193s0f1np1":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:c0/0000:c0:01.1/0000:c1:00.1/net/enp193s0f1np1","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"MT27700 Family [ConnectX-4]","ID_MODEL_ID":"0x1013","ID_NET_DRIVER":"mlx5_core","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"enp193s0f1np1","ID_NET_NAME_MAC":"enx248a071e05bd","ID_NET_NAME_PATH":"enp193s0f1np1","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"Mellanox Technologies, Inc.","ID_PATH":"pci-0000:c1:00.1","ID_PATH_TAG":"pci-0000_c1_00_1","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Mellanox Technologies","ID_VENDOR_ID":"0x15b3","IFINDEX":"10","INTERFACE":"enp193s0f1np1","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/enp193s0f1np1","TAGS":":systemd:","USEC_INITIALIZED":"47820155"},"enp65s0f0":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:40/0000:40:03.1/0000:41:00.0/net/enp65s0f0","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"I350 Gigabit Network Connection (Ethernet Server Adapter I350-T2)","ID_MODEL_ID":"0x1521","ID_NET_DRIVER":"igb","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"enp65s0f0","ID_NET_NAME_MAC":"enxa0369f0ab382","ID_NET_NAME_PATH":"enp65s0f0","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"Intel Corporate","ID_PATH":"pci-0000:41:00.0","ID_PATH_TAG":"pci-0000_41_00_0","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Intel Corporation","ID_VENDOR_ID":"0x8086","IFINDEX":"3","INTERFACE":"enp65s0f0","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/enp65s0f0","TAGS":":systemd:","USEC_INITIALIZED":"45176103"},"enp65s0f1":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:40/0000:40:03.1/0000:41:00.1/net/enp65s0f1","ID_BUS":"pci","ID_MODEL_FROM_DATABASE":"I350 Gigabit Network Connection (Ethernet Server Adapter I350-T2)","ID_MODEL_ID":"0x1521","ID_NET_DRIVER":"igb","ID_NET_LINK_FILE":"/usr/lib/systemd/network/99-default.link","ID_NET_NAME":"enp65s0f1","ID_NET_NAME_MAC":"enxa0369f0ab383","ID_NET_NAME_PATH":"enp65s0f1","ID_NET_NAMING_SCHEME":"v252","ID_OUI_FROM_DATABASE":"Intel Corporate","ID_PATH":"pci-0000:41:00.1","ID_PATH_TAG":"pci-0000_41_00_1","ID_PCI_CLASS_FROM_DATABASE":"Network controller","ID_PCI_SUBCLASS_FROM_DATABASE":"Ethernet controller","ID_VENDOR_FROM_DATABASE":"Intel Corporation","ID_VENDOR_ID":"0x8086","IFINDEX":"4","INTERFACE":"enp65s0f1","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/enp65s0f1","TAGS":":systemd:","USEC_INITIALIZED":"45260218"},"enxaa0c304b6362":{"CURRENT_TAGS":":systemd:","DEVPATH":"/devices/pci0000:40/0000:40:08.1/0000:43:00.3/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:2.0/net/enxaa0c304b6362","ID_BUS":"usb","ID_MODEL":"Virtual_Ethernet","ID_MODEL_ENC":"Virtual\\x20Ethernet","ID_MODEL_ID":"ffb0","ID_NET_DRIVER":"cdc_ether","ID_NET_LINK_FILE":"/usr/lib/systemd/network/73-usb-net-by-mac.link","ID_NET_NAME":"enxaa0c304b6362","ID_NET_NAME_MAC":"enxaa0c304b6362","ID_NET_NAME_PATH":"enp67s0f3u2u4u3c2","ID_NET_NAMING_SCHEME":"v252","ID_PATH":"pci-0000:43:00.3-usb-0:2.4.3:2.0","ID_PATH_TAG":"pci-0000_43_00_3-usb-0_2_4_3_2_0","ID_REVISION":"0100","ID_SERIAL":"American_Megatrends_Inc._Virtual_Ethernet_1234567890","ID_SERIAL_SHORT":"1234567890","ID_TYPE":"generic","ID_USB_CLASS_FROM_DATABASE":"Communications","ID_USB_DRIVER":"cdc_ether","ID_USB_INTERFACES":":0202ff:0a0000:020600:","ID_USB_INTERFACE_NUM":"00","ID_USB_MODEL":"Virtual_Ethernet","ID_USB_MODEL_ENC":"Virtual\\x20Ethernet","ID_USB_MODEL_ID":"ffb0","ID_USB_REVISION":"0100","ID_USB_SERIAL":"American_Megatrends_Inc._Virtual_Ethernet_1234567890","ID_USB_SERIAL_SHORT":"1234567890","ID_USB_TYPE":"generic","ID_USB_VENDOR":"American_Megatrends_Inc.","ID_USB_VENDOR_ENC":"American\\x20Megatrends\\x20Inc.","ID_USB_VENDOR_ID":"046b","ID_VENDOR":"American_Megatrends_Inc.","ID_VENDOR_ENC":"American\\x20Megatrends\\x20Inc.","ID_VENDOR_FROM_DATABASE":"American Megatrends, Inc.","ID_VENDOR_ID":"046b","IFINDEX":"2","INTERFACE":"enxaa0c304b6362","SUBSYSTEM":"net","SYSTEMD_ALIAS":"/sys/subsystem/net/devices/enxaa0c304b6362","TAGS":":systemd:","USEC_INITIALIZED":"44748106"}}}
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 13/18] auto-installer: add auto-installer binary
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (11 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 12/18] auto-installer: add tests for answer file parsing Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary Aaron Lauterer
` (5 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
It expects the contents of an answer file via stdin. It will then be
parsed and the JSON for the low level installer is generated.
It then calls the low level installer directly.
The output of the installaton progress is kept rather simple for now.
If configured in the answer file, commands will be run pre and post the
low level installer.
It also logs everything to the logfile, currently
'/tmp/auto_installer.log'.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
Makefile | 4 +-
.../src/bin/proxmox-auto-installer.rs | 192 ++++++++++++++++++
2 files changed, 195 insertions(+), 1 deletion(-)
create mode 100644 proxmox-auto-installer/src/bin/proxmox-auto-installer.rs
diff --git a/Makefile b/Makefile
index 57bd7ae..9c933d9 100644
--- a/Makefile
+++ b/Makefile
@@ -18,7 +18,9 @@ INSTALLER_SOURCES=$(shell git ls-files) country.dat
PREFIX = /usr
BINDIR = $(PREFIX)/bin
-USR_BIN := proxmox-tui-installer
+USR_BIN := \
+ proxmox-tui-installer\
+ proxmox-auto-installer
COMPILED_BINS := \
$(addprefix $(CARGO_COMPILEDIR)/,$(USR_BIN))
diff --git a/proxmox-auto-installer/src/bin/proxmox-auto-installer.rs b/proxmox-auto-installer/src/bin/proxmox-auto-installer.rs
new file mode 100644
index 0000000..8ede670
--- /dev/null
+++ b/proxmox-auto-installer/src/bin/proxmox-auto-installer.rs
@@ -0,0 +1,192 @@
+use anyhow::{anyhow, bail, Result};
+use log::{error, info, LevelFilter};
+use std::{
+ env,
+ io::{BufRead, BufReader, Write},
+ path::PathBuf,
+ process::ExitCode,
+};
+
+use proxmox_installer_common::setup::{
+ installer_setup, read_json, spawn_low_level_installer, LocaleInfo, RuntimeInfo, SetupInfo,
+};
+
+use proxmox_auto_installer::{
+ answer::Answer,
+ log::AutoInstLogger,
+ udevinfo::UdevInfo,
+ utils,
+ utils::{parse_answer, LowLevelMessage},
+};
+
+static LOGGER: AutoInstLogger = AutoInstLogger;
+
+pub fn init_log() -> Result<()> {
+ AutoInstLogger::init("/tmp/auto_installer.log")?;
+ log::set_logger(&LOGGER)
+ .map(|()| log::set_max_level(LevelFilter::Info))
+ .map_err(|err| anyhow!(err))
+}
+
+fn auto_installer_setup(in_test_mode: bool) -> Result<(Answer, UdevInfo)> {
+ let base_path = if in_test_mode { "./testdir" } else { "/" };
+ let mut path = PathBuf::from(base_path);
+
+ path.push("run");
+ path.push("proxmox-installer");
+
+ let udev_info: UdevInfo = {
+ let mut path = path.clone();
+ path.push("run-env-udev.json");
+
+ read_json(&path).map_err(|err| anyhow!("Failed to retrieve udev info details: {err}"))?
+ };
+
+ let mut buffer = String::new();
+ let lines = std::io::stdin().lock().lines();
+ for line in lines {
+ buffer.push_str(&line.unwrap());
+ buffer.push('\n');
+ }
+
+ let answer: Answer =
+ toml::from_str(&buffer).map_err(|err| anyhow!("Failed parsing answer file: {err}"))?;
+
+ Ok((answer, udev_info))
+}
+
+fn main() -> ExitCode {
+ if let Err(err) = init_log() {
+ panic!("could not initilize logging: {}", err);
+ }
+
+ let in_test_mode = match env::args().nth(1).as_deref() {
+ Some("-t") => true,
+ // Always force the test directory in debug builds
+ _ => cfg!(debug_assertions),
+ };
+ info!("Starting auto installer");
+
+ let (setup_info, locales, runtime_info) = match installer_setup(in_test_mode) {
+ Ok(result) => result,
+ Err(err) => {
+ error!("Installer setup error: {err}");
+ return ExitCode::FAILURE;
+ }
+ };
+
+ let (answer, udevadm_info) = match auto_installer_setup(in_test_mode) {
+ Ok(result) => result,
+ Err(err) => {
+ error!("Autoinstaller setup error: {err}");
+ return ExitCode::FAILURE;
+ }
+ };
+
+ match utils::run_cmds("Pre", &answer.global.pre_command) {
+ Ok(_) => (),
+ Err(err) => {
+ error!("Error when running Pre-Commands: {}", err);
+ return exit_failure(answer.global.reboot_on_error);
+ }
+ };
+ match run_installation(&answer, &locales, &runtime_info, &udevadm_info, &setup_info) {
+ Ok(_) => info!("Installation done."),
+ Err(err) => {
+ error!("Installation failed: {err}");
+ return exit_failure(answer.global.reboot_on_error);
+ }
+ }
+ match utils::run_cmds("Post", &answer.global.post_command) {
+ Ok(_) => (),
+ Err(err) => {
+ error!("Error when running Post-Commands: {}", err);
+ return exit_failure(answer.global.reboot_on_error);
+ }
+ };
+ ExitCode::SUCCESS
+}
+
+/// When we exit with a failure, the installer will not automatically reboot.
+/// Default value for reboot_on_error is false
+fn exit_failure(reboot_on_error: Option<bool>) -> ExitCode {
+ if let Some(true) = reboot_on_error {
+ ExitCode::SUCCESS
+ } else {
+ ExitCode::FAILURE
+ }
+}
+
+fn run_installation(
+ answer: &Answer,
+ locales: &LocaleInfo,
+ runtime_info: &RuntimeInfo,
+ udevadm_info: &UdevInfo,
+ setup_info: &SetupInfo,
+) -> Result<()> {
+ let config = parse_answer(answer, udevadm_info, runtime_info, locales, setup_info)?;
+ info!("Calling low-level installer");
+
+ let mut child = match spawn_low_level_installer(false) {
+ Ok(child) => child,
+ Err(err) => {
+ bail!("Low level installer could not be started: {}", err);
+ }
+ };
+
+ let mut cur_counter = 111;
+ let mut inner = || -> Result<()> {
+ let reader = child
+ .stdout
+ .take()
+ .map(BufReader::new)
+ .ok_or(anyhow!("failed to get stdout reader"))?;
+ let mut writer = child
+ .stdin
+ .take()
+ .ok_or(anyhow!("failed to get stdin writer"))?;
+
+ serde_json::to_writer(&mut writer, &config)
+ .map_err(|err| anyhow!("failed to serialize install config: {err}"))?;
+ writeln!(writer).map_err(|err| anyhow!("failed to write install config: {err}"))?;
+
+ for line in reader.lines() {
+ let line = match line {
+ Ok(line) => line,
+ Err(_) => break,
+ };
+ let msg = match serde_json::from_str::<LowLevelMessage>(&line) {
+ Ok(msg) => msg,
+ Err(_) => {
+ // Not a fatal error, so don't abort the installation by returning
+ continue;
+ }
+ };
+
+ match msg.clone() {
+ LowLevelMessage::Info { message } => info!("{message}"),
+ LowLevelMessage::Error { message } => error!("{message}"),
+ LowLevelMessage::Prompt { query } => info!("Got Query: {query}"),
+ LowLevelMessage::Progress { ratio, text: _ } => {
+ let counter = (ratio * 100.).floor() as usize;
+ if counter != cur_counter {
+ cur_counter = counter;
+ info!("Progress: {counter:>3}%");
+ }
+ }
+ LowLevelMessage::Finished { state, message } => {
+ if state == "err" {
+ bail!("{message}");
+ } else {
+ info!("Finished: '{state}' {message}");
+ }
+ }
+ };
+ }
+ Ok(())
+ };
+ match inner() {
+ Err(err) => bail!("low level installer returned early: {err}"),
+ _ => Ok(()),
+ }
+}
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (12 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 13/18] auto-installer: add auto-installer binary Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-02-06 11:33 ` Christoph Heiss
2024-02-08 14:18 ` Christoph Heiss
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 15/18] auto-installer: use glob crate for pattern matching Aaron Lauterer
` (4 subsequent siblings)
18 siblings, 2 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
it is supposed to be run first and fetch an answer file.
The initial implementation searches for a partition/filesystem called
'proxmoxinst' or 'PROXMOXINST' with an 'answer.toml' file in the root
directory.
Once it has an answer file, it will call the 'proxmox-auto-installer'
and pipe in the contents via stdin.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
Makefile | 1 +
.../src/bin/proxmox-fetch-answer.rs | 73 +++++++++++++
.../src/fetch_plugins/mod.rs | 1 +
.../src/fetch_plugins/partition.rs | 102 ++++++++++++++++++
proxmox-auto-installer/src/lib.rs | 1 +
5 files changed, 178 insertions(+)
create mode 100644 proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs
create mode 100644 proxmox-auto-installer/src/fetch_plugins/mod.rs
create mode 100644 proxmox-auto-installer/src/fetch_plugins/partition.rs
diff --git a/Makefile b/Makefile
index 9c933d9..b724789 100644
--- a/Makefile
+++ b/Makefile
@@ -20,6 +20,7 @@ PREFIX = /usr
BINDIR = $(PREFIX)/bin
USR_BIN := \
proxmox-tui-installer\
+ proxmox-fetch-answer\
proxmox-auto-installer
COMPILED_BINS := \
diff --git a/proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs b/proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs
new file mode 100644
index 0000000..baf2bd2
--- /dev/null
+++ b/proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs
@@ -0,0 +1,73 @@
+use anyhow::{anyhow, bail, Result};
+use log::{error, info, LevelFilter};
+use proxmox_auto_installer::fetch_plugins::partition::FetchFromPartition;
+use proxmox_auto_installer::log::AutoInstLogger;
+use std::io::Write;
+use std::process::{Command, ExitCode, Stdio};
+
+static LOGGER: AutoInstLogger = AutoInstLogger;
+
+pub fn init_log() -> Result<()> {
+ AutoInstLogger::init("/tmp/fetch_answer.log")?;
+ log::set_logger(&LOGGER)
+ .map(|()| log::set_max_level(LevelFilter::Info))
+ .map_err(|err| anyhow!(err))
+}
+
+fn fetch_answer() -> Result<String> {
+ info!("Checking for partition");
+ match FetchFromPartition::get_answer() {
+ Ok(answer) => return Ok(answer),
+ Err(err) => info!("Fetching answer file from partition failed: {}", err),
+ }
+ // TODO: add more options to get an answer file, e.g. download from url where url could be
+ // fetched via txt records on predefined subdomain, kernel param, dhcp option, ...
+
+ bail!("Could not find any answer file!")
+}
+
+fn main() -> ExitCode {
+ if let Err(err) = init_log() {
+ panic!("could not initilize logging: {err}");
+ }
+
+ info!("Fetching answer file");
+ let answer = match fetch_answer() {
+ Ok(answer) => answer,
+ Err(err) => {
+ error!("Aborting: {}", err);
+ return ExitCode::FAILURE;
+ }
+ };
+
+ let mut child = match Command::new("/usr/bin/proxmox-auto-installer")
+ .stdout(Stdio::inherit())
+ .stdin(Stdio::piped())
+ .stderr(Stdio::null())
+ .spawn()
+ {
+ Ok(child) => child,
+ Err(err) => panic!("Failed to start automatic installation: {}", err),
+ };
+
+ let mut stdin = child.stdin.take().expect("Failed to open stdin");
+ std::thread::spawn(move || {
+ stdin
+ .write_all(answer.as_bytes())
+ .expect("Failed to write to stdin");
+ });
+
+ match child.wait() {
+ Ok(status) => {
+ if status.success() {
+ ExitCode::SUCCESS
+ } else {
+ ExitCode::FAILURE // Will be trapped
+ }
+ }
+ Err(err) => {
+ error!("Auto installer exited: {err}");
+ ExitCode::FAILURE
+ }
+ }
+}
diff --git a/proxmox-auto-installer/src/fetch_plugins/mod.rs b/proxmox-auto-installer/src/fetch_plugins/mod.rs
new file mode 100644
index 0000000..44399e6
--- /dev/null
+++ b/proxmox-auto-installer/src/fetch_plugins/mod.rs
@@ -0,0 +1 @@
+pub mod partition;
diff --git a/proxmox-auto-installer/src/fetch_plugins/partition.rs b/proxmox-auto-installer/src/fetch_plugins/partition.rs
new file mode 100644
index 0000000..0552ddd
--- /dev/null
+++ b/proxmox-auto-installer/src/fetch_plugins/partition.rs
@@ -0,0 +1,102 @@
+use anyhow::{bail, Result};
+use log::{info, warn};
+use std::fs::read_to_string;
+use std::path::{Path, PathBuf};
+use std::process::Command;
+
+static ANSWER_FILE: &str = "answer.toml";
+static ANSWER_MP: &str = "/mnt/answer";
+static PARTLABEL: &str = "proxmoxinst";
+static SEARCH_PATH: &str = "/dev/disk/by-label";
+
+pub struct FetchFromPartition;
+
+impl FetchFromPartition {
+ /// Returns the contents of the answer file
+ pub fn get_answer() -> Result<String> {
+ let part_path = Self::scan_partlabels()?;
+ Self::mount_part(part_path)?;
+ Self::get_answer_file()
+ }
+
+ /// Searches for upper and lower case existence of the PARTLABEL in the SEARCH_PATH
+ fn scan_partlabels() -> Result<PathBuf> {
+ let partlabel = PARTLABEL.to_uppercase();
+ let path = Path::new(SEARCH_PATH).join(partlabel.clone());
+ match path.try_exists() {
+ Ok(true) => {
+ info!("Found partition with label '{}'", partlabel);
+ return Ok(path);
+ }
+ Ok(false) => info!("Did not detect partition with label '{}'", partlabel),
+ Err(err) => info!("Encountered issue, accessing '{}': {}", path.display(), err),
+ }
+
+ let partlabel = PARTLABEL.to_lowercase();
+ let path = Path::new(SEARCH_PATH).join(partlabel.clone());
+ match path.try_exists() {
+ Ok(true) => {
+ info!("Found partition with label '{}'", partlabel);
+ return Ok(path);
+ }
+ Ok(false) => info!("Did not detect partition with label '{}'", partlabel),
+ Err(err) => info!("Encountered issue, accessing '{}': {}", path.display(), err),
+ }
+ bail!(
+ "Could not detect upper or lower case labels for '{}'",
+ PARTLABEL
+ );
+ }
+
+ /// Will mount source path to ANSWER_MP
+ ///
+ /// # Arguments
+ ///
+ /// * `source` - `PathBuf` of the source location
+ fn mount_part(source: PathBuf) -> Result<()> {
+ info!("Mounting partition at {ANSWER_MP}");
+ // create dir for mountpoint
+ match Command::new("/usr/bin/mkdir")
+ .arg(ANSWER_MP)
+ .arg("-p")
+ .output()
+ {
+ Ok(output) => {
+ if !output.status.success() {
+ warn!(
+ "Error creating mount path: {}",
+ String::from_utf8(output.stderr)?
+ )
+ }
+ }
+ Err(err) => bail!("Error creating mount path: {}", err),
+ }
+ match Command::new("/usr/bin/mount")
+ .arg(source)
+ .arg(ANSWER_MP)
+ .output()
+ {
+ Ok(output) => {
+ if output.status.success() {
+ Ok(())
+ } else {
+ warn!("Error mounting: {}", String::from_utf8(output.stderr)?);
+ Ok(())
+ }
+ }
+ Err(err) => bail!("Error mounting: {}", err),
+ }
+ }
+
+ /// Searches for answer file and returns contents if found
+ fn get_answer_file() -> Result<String> {
+ let answer_path = Path::new(ANSWER_MP).join(ANSWER_FILE);
+ match answer_path.try_exists() {
+ Ok(true) => Ok(read_to_string(answer_path)?),
+ _ => bail!(
+ "could not find answer file expected at: {}",
+ answer_path.display()
+ ),
+ }
+ }
+}
diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
index 6636cc7..0a153b2 100644
--- a/proxmox-auto-installer/src/lib.rs
+++ b/proxmox-auto-installer/src/lib.rs
@@ -1,4 +1,5 @@
pub mod answer;
+pub mod fetch_plugins;
pub mod log;
pub mod udevinfo;
pub mod utils;
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 15/18] auto-installer: use glob crate for pattern matching
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (13 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-02-08 9:01 ` Christoph Heiss
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 16/18] auto-installer: utils: make get_udev_index functions public Aaron Lauterer
` (3 subsequent siblings)
18 siblings, 1 reply; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/Cargo.toml | 1 +
proxmox-auto-installer/src/utils.rs | 48 +++++++++++------------------
2 files changed, 19 insertions(+), 30 deletions(-)
diff --git a/proxmox-auto-installer/Cargo.toml b/proxmox-auto-installer/Cargo.toml
index 078a333..158a0a8 100644
--- a/proxmox-auto-installer/Cargo.toml
+++ b/proxmox-auto-installer/Cargo.toml
@@ -9,6 +9,7 @@ homepage = "https://www.proxmox.com"
[dependencies]
anyhow = "1.0"
+glob = "0.3"
proxmox-installer-common = { path = "../proxmox-installer-common" }
serde = { version = "1.0", features = ["derive"] }
serde_json = "1.0"
diff --git a/proxmox-auto-installer/src/utils.rs b/proxmox-auto-installer/src/utils.rs
index 6e650c5..5990e93 100644
--- a/proxmox-auto-installer/src/utils.rs
+++ b/proxmox-auto-installer/src/utils.rs
@@ -1,4 +1,5 @@
use anyhow::{anyhow, bail, Context, Result};
+use glob::Pattern;
use log::info;
use std::{
collections::BTreeMap,
@@ -21,30 +22,12 @@ use proxmox_installer_common::{
};
use serde::Deserialize;
-/// Supports the globbing character '*' at the beginning, end or both of the pattern.
-/// Globbing within the pattern is not supported
-fn find_with_glob(pattern: &str, value: &str) -> bool {
- let globbing_symbol = '*';
- let mut start_glob = false;
- let mut end_glob = false;
- let mut pattern = pattern;
-
- if pattern.starts_with(globbing_symbol) {
- start_glob = true;
- pattern = &pattern[1..];
- }
-
- if pattern.ends_with(globbing_symbol) {
- end_glob = true;
- pattern = &pattern[..pattern.len() - 1]
- }
-
- match (start_glob, end_glob) {
- (true, true) => value.contains(pattern),
- (true, false) => value.ends_with(pattern),
- (false, true) => value.starts_with(pattern),
- _ => value == pattern,
- }
+fn find_with_glob(pattern: &str, value: &str) -> Result<bool> {
+ let p = Pattern::new(pattern)?;
+ match p.matches(value) {
+ true => Ok(true),
+ false => Ok(false),
+ }
}
pub fn get_network_settings(
@@ -107,7 +90,7 @@ fn get_single_udev_index(
'outer: for (dev, dev_values) in udev_list {
for (filter_key, filter_value) in &filter {
for (udev_key, udev_value) in dev_values {
- if udev_key == filter_key && find_with_glob(filter_value, udev_value) {
+ if udev_key == filter_key && find_with_glob(filter_value, udev_value)? {
dev_index = Some(dev.clone());
break 'outer; // take first match
}
@@ -132,7 +115,7 @@ fn get_matched_udev_indexes(
let mut did_match_all = true;
for (filter_key, filter_value) in &filter {
for (udev_key, udev_value) in dev_values {
- if udev_key == filter_key && find_with_glob(filter_value, udev_value) {
+ if udev_key == filter_key && find_with_glob(filter_value, udev_value)? {
did_match_once = true;
} else if udev_key == filter_key {
did_match_all = false;
@@ -465,9 +448,14 @@ mod tests {
#[test]
fn test_glob_patterns() {
let test_value = "foobar";
- assert_eq!(find_with_glob("*bar", test_value), true);
- assert_eq!(find_with_glob("foo*", test_value), true);
- assert_eq!(find_with_glob("foobar", test_value), true);
- assert_eq!(find_with_glob("oobar", test_value), false);
+ assert_eq!(find_with_glob("*bar", test_value).unwrap(), true);
+ assert_eq!(find_with_glob("foo*", test_value).unwrap(), true);
+ assert_eq!(find_with_glob("foobar", test_value).unwrap(), true);
+ assert_eq!(find_with_glob("oobar", test_value).unwrap(), false);
+ assert_eq!(find_with_glob("f*bar", test_value).unwrap(), true);
+ assert_eq!(find_with_glob("f?bar", test_value).unwrap(), false);
+ assert_eq!(find_with_glob("fo?bar", test_value).unwrap(), true);
+ assert_eq!(find_with_glob("f[!a]obar", test_value).unwrap(), true);
+ assert_eq!(find_with_glob("f[oa]obar", test_value).unwrap(), true);
}
}
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 16/18] auto-installer: utils: make get_udev_index functions public
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (14 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 15/18] auto-installer: use glob crate for pattern matching Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 17/18] auto-installer: add proxmox-installer-filter helper tool Aaron Lauterer
` (2 subsequent siblings)
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
because we will need to access them directly in the future from a
separate binary
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
proxmox-auto-installer/src/utils.rs | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/proxmox-auto-installer/src/utils.rs b/proxmox-auto-installer/src/utils.rs
index 5990e93..283dbdc 100644
--- a/proxmox-auto-installer/src/utils.rs
+++ b/proxmox-auto-installer/src/utils.rs
@@ -79,7 +79,7 @@ pub fn get_network_settings(
Ok(network_options)
}
-fn get_single_udev_index(
+pub fn get_single_udev_index(
filter: BTreeMap<String, String>,
udev_list: &BTreeMap<String, BTreeMap<String, String>>,
) -> Result<String> {
@@ -104,7 +104,7 @@ fn get_single_udev_index(
Ok(dev_index.unwrap())
}
-fn get_matched_udev_indexes(
+pub fn get_matched_udev_indexes(
filter: BTreeMap<String, String>,
udev_list: &BTreeMap<String, BTreeMap<String, String>>,
match_all: bool,
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 installer 17/18] auto-installer: add proxmox-installer-filter helper tool
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (15 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 16/18] auto-installer: utils: make get_udev_index functions public Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 docs 18/18] installation: add unattended documentation Aaron Lauterer
2024-02-08 10:26 ` [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Christoph Heiss
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
The proxmox-installer-filter tool is a helper utility to fetch UDEV
properties quickly and show them to the user.
Additionally it allows the user to test out filters for the auto
installer answer file to see which devices would be selected.
Since this tool should be able to run outside of the installer
environment, it does not rely on the device information provided by the
low-level installer. It instead fetches the list of disks and NICs by
itself.
The rules when a device is ignored, should match how the low-level
installer handles it.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
Makefile | 1 +
proxmox-auto-installer/Cargo.toml | 2 +
proxmox-auto-installer/src/answer.rs | 3 +-
.../src/bin/proxmox-installer-filter.rs | 298 ++++++++++++++++++
4 files changed, 303 insertions(+), 1 deletion(-)
create mode 100644 proxmox-auto-installer/src/bin/proxmox-installer-filter.rs
diff --git a/Makefile b/Makefile
index b724789..2861f9e 100644
--- a/Makefile
+++ b/Makefile
@@ -20,6 +20,7 @@ PREFIX = /usr
BINDIR = $(PREFIX)/bin
USR_BIN := \
proxmox-tui-installer\
+ proxmox-installer-filter\
proxmox-fetch-answer\
proxmox-auto-installer
diff --git a/proxmox-auto-installer/Cargo.toml b/proxmox-auto-installer/Cargo.toml
index 158a0a8..570c34c 100644
--- a/proxmox-auto-installer/Cargo.toml
+++ b/proxmox-auto-installer/Cargo.toml
@@ -9,9 +9,11 @@ homepage = "https://www.proxmox.com"
[dependencies]
anyhow = "1.0"
+clap = { version = "4.0", features = ["derive"] }
glob = "0.3"
proxmox-installer-common = { path = "../proxmox-installer-common" }
serde = { version = "1.0", features = ["derive"] }
serde_json = "1.0"
toml = "0.5.11"
log = "0.4.20"
+regex = "1.7"
diff --git a/proxmox-auto-installer/src/answer.rs b/proxmox-auto-installer/src/answer.rs
index 0f6c593..de88d7d 100644
--- a/proxmox-auto-installer/src/answer.rs
+++ b/proxmox-auto-installer/src/answer.rs
@@ -1,3 +1,4 @@
+use clap::ValueEnum;
use serde::{Deserialize, Serialize};
use std::collections::BTreeMap;
@@ -44,7 +45,7 @@ pub struct Disks {
pub btrfs: Option<BtrfsOptions>,
}
-#[derive(Clone, Deserialize, Debug, PartialEq)]
+#[derive(Clone, Deserialize, Debug, PartialEq, ValueEnum)]
#[serde(rename_all = "lowercase")]
pub enum FilterMatch {
Any,
diff --git a/proxmox-auto-installer/src/bin/proxmox-installer-filter.rs b/proxmox-auto-installer/src/bin/proxmox-installer-filter.rs
new file mode 100644
index 0000000..315f414
--- /dev/null
+++ b/proxmox-auto-installer/src/bin/proxmox-installer-filter.rs
@@ -0,0 +1,298 @@
+use anyhow::{bail, Result};
+use clap::{Args, Parser, Subcommand, ValueEnum};
+use glob::Pattern;
+use regex::Regex;
+use serde::{Deserialize, Serialize};
+use std::{collections::BTreeMap, fs, path::PathBuf, process::Command};
+
+use proxmox_auto_installer::{
+ answer::FilterMatch,
+ utils::{get_matched_udev_indexes, get_single_udev_index},
+};
+
+/// Tool to get info for devices and test filter matches
+#[derive(Parser, Debug)]
+#[command(author, version, about, long_about = None)]
+struct Cli {
+ #[command(subcommand)]
+ command: Commands,
+}
+
+#[derive(Subcommand, Debug)]
+enum Commands {
+ Info(CommandInfo),
+ Match(CommandMatch),
+}
+
+/// Helper utility to show device information and test filters for the Proxmox auto installer
+#[derive(Args, Debug)]
+struct CommandInfo {
+ /// For which device type information should be shown
+ #[arg(name="type", short, long, value_enum, default_value_t=AllDeviceTypes::All)]
+ device: AllDeviceTypes,
+}
+
+/// Test which devices the given filter match against
+///
+/// Filters support the following syntax:
+/// ? Match a single character
+/// * Match any number of characters
+/// [a], [0-9] Specifc character or range of characters
+/// [!a] Negate a specific character of range
+///
+/// To avoid globbing characters being interpreted by the shell, use single quotes.
+/// Multiple filters can be defined.
+///
+/// Examples:
+/// Match disks against the serial number and device name, both must match:
+///
+/// proxmox-installer-filter match --filter-match all disk 'ID_SERIAL_SHORT=*2222*' 'DEVNAME=*nvme*'
+#[derive(Args, Debug)]
+#[command(verbatim_doc_comment)]
+struct CommandMatch {
+ /// Device type to match the filter against
+ //#[arg(name = "type", long, short, value_enum, required = true)]
+ r#type: Devicetype,
+
+ /// Filter in the format KEY=VALUE where the key is the UDEV key and VALUE the filter string.
+ //#[arg(long, num_args = 1.., verbatim_doc_comment, required = true)]
+ filter: Vec<String>,
+
+ /// Defines if any filter or all filters must match.
+ #[arg(long, value_enum, default_value_t=FilterMatch::Any)]
+ filter_match: FilterMatch,
+}
+
+#[derive(Args, Debug)]
+struct GlobalOpts {
+ /// Output format
+ #[arg(long, short, value_enum)]
+ format: OutputFormat,
+}
+
+#[derive(Clone, Debug, ValueEnum, PartialEq)]
+enum AllDeviceTypes {
+ All,
+ Network,
+ Disk,
+}
+
+#[derive(Clone, Debug, ValueEnum)]
+enum Devicetype {
+ Network,
+ Disk,
+}
+
+#[derive(Clone, Debug, ValueEnum)]
+enum OutputFormat {
+ Pretty,
+ Json,
+}
+
+#[derive(Serialize)]
+struct Devs {
+ disks: Option<BTreeMap<String, BTreeMap<String, String>>>,
+ nics: Option<BTreeMap<String, BTreeMap<String, String>>>,
+}
+
+fn main() {
+ let args = Cli::parse();
+ match &args.command {
+ Commands::Info(args) => info(args),
+ Commands::Match(args) => match_filter(args),
+ }
+}
+
+fn info(args: &CommandInfo) {
+ let mut devs = Devs {
+ disks: None,
+ nics: None,
+ };
+
+ if args.device == AllDeviceTypes::Network || args.device == AllDeviceTypes::All {
+ match get_nics() {
+ Ok(res) => devs.nics = Some(res),
+ Err(err) => panic!("Error getting NIC data: {err}"),
+ }
+ }
+ if args.device == AllDeviceTypes::Disk || args.device == AllDeviceTypes::All {
+ match get_disks() {
+ Ok(res) => devs.disks = Some(res),
+ Err(err) => panic!("Error getting disk data: {err}"),
+ }
+ }
+ println!("{}", serde_json::to_string_pretty(&devs).unwrap());
+}
+
+fn match_filter(args: &CommandMatch) {
+ let devs: BTreeMap<String, BTreeMap<String, String>> = match args.r#type {
+ Devicetype::Disk => get_disks().unwrap(),
+ Devicetype::Network => get_nics().unwrap(),
+ };
+ // parse filters
+
+ let mut filters: BTreeMap<String, String> = BTreeMap::new();
+
+ for f in &args.filter {
+ match f.split_once('=') {
+ Some((key, value)) => {
+ if key.is_empty() || value.is_empty() {
+ eprintln!("Filter key or value is empty in filter: '{f}'");
+ std::process::exit(1);
+ }
+ filters.insert(String::from(key), String::from(value));
+ }
+ None => {
+ eprintln!("Could not find separator '=' in filter: '{f}'");
+ std::process::exit(1);
+ }
+ }
+ }
+
+ // align return values
+ let result = match args.r#type {
+ Devicetype::Disk => {
+ get_matched_udev_indexes(filters, &devs, args.filter_match == FilterMatch::All)
+ }
+ Devicetype::Network => get_single_udev_index(filters, &devs).map(|r| vec![r]),
+ };
+
+ match result {
+ Ok(result) => println!("{}", serde_json::to_string_pretty(&result).unwrap()),
+ Err(err) => eprintln!("Error matching filters: {err}"),
+ }
+}
+
+fn get_disks() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
+ let unwantend_block_devs = vec![
+ "ram[0-9]*",
+ "loop[0-9]*",
+ "md[0-9]*",
+ "dm-*",
+ "fd[0-9]*",
+ "sr[0-9]*",
+ ];
+
+ // compile Regex here once and not inside the loop
+ let re_disk = Regex::new(r"(?m)^E: DEVTYPE=disk")?;
+ let re_cdrom = Regex::new(r"(?m)^E: ID_CDROM")?;
+ let re_iso9660 = Regex::new(r"(?m)^E: ID_FS_TYPE=iso9660")?;
+
+ let re_name = Regex::new(r"(?m)^N: (.*)$")?;
+ let re_props = Regex::new(r"(?m)^E: (.*)=(.*)$")?;
+
+ let mut disks: BTreeMap<String, BTreeMap<String, String>> = BTreeMap::new();
+
+ 'outer: for entry in fs::read_dir("/sys/block")? {
+ let entry = entry.unwrap();
+ let filename = entry.file_name().into_string().unwrap();
+
+ for p in &unwantend_block_devs {
+ if Pattern::new(p)?.matches(&filename) {
+ continue 'outer;
+ }
+ }
+
+ let output = match get_udev_properties(&entry.path()) {
+ Ok(output) => output,
+ Err(err) => {
+ eprint!("{err}");
+ continue 'outer;
+ }
+ };
+
+ if !re_disk.is_match(&output) {
+ continue 'outer;
+ };
+ if re_cdrom.is_match(&output) {
+ continue 'outer;
+ };
+ if re_iso9660.is_match(&output) {
+ continue 'outer;
+ };
+
+ let mut name = filename;
+ if let Some(cap) = re_name.captures(&output) {
+ if let Some(res) = cap.get(1) {
+ name = String::from(res.as_str());
+ }
+ }
+
+ let mut udev_props: BTreeMap<String, String> = BTreeMap::new();
+
+ for line in output.lines() {
+ if let Some(caps) = re_props.captures(line) {
+ let key = String::from(caps.get(1).unwrap().as_str());
+ let value = String::from(caps.get(2).unwrap().as_str());
+ udev_props.insert(key, value);
+ }
+ }
+
+ disks.insert(name, udev_props);
+ }
+ Ok(disks)
+}
+
+#[derive(Deserialize, Debug)]
+struct IpLinksInfo {
+ ifname: String,
+}
+
+fn get_nics() -> Result<BTreeMap<String, BTreeMap<String, String>>> {
+ let re_props = Regex::new(r"(?m)^E: (.*)=(.*)$")?;
+ let mut nics: BTreeMap<String, BTreeMap<String, String>> = BTreeMap::new();
+
+ let ip_output = Command::new("/usr/sbin/ip")
+ .arg("-j")
+ .arg("link")
+ .output()?;
+ let parsed_links: Vec<IpLinksInfo> =
+ serde_json::from_str(String::from_utf8(ip_output.stdout)?.as_str())?;
+ let mut links: Vec<String> = Vec::new();
+
+ for link in parsed_links {
+ if link.ifname == *"lo" {
+ continue;
+ }
+ links.push(link.ifname);
+ }
+
+ for link in links {
+ let path = format!("/sys/class/net/{link}");
+
+ let output = match get_udev_properties(&PathBuf::from(path)) {
+ Ok(output) => output,
+ Err(err) => {
+ eprint!("{err}");
+ continue;
+ }
+ };
+
+ let mut udev_props: BTreeMap<String, String> = BTreeMap::new();
+
+ for line in output.lines() {
+ if let Some(caps) = re_props.captures(line) {
+ let key = String::from(caps.get(1).unwrap().as_str());
+ let value = String::from(caps.get(2).unwrap().as_str());
+ udev_props.insert(key, value);
+ }
+ }
+
+ nics.insert(link, udev_props);
+ }
+ Ok(nics)
+}
+
+fn get_udev_properties(path: &PathBuf) -> Result<String> {
+ let udev_output = Command::new("udevadm")
+ .arg("info")
+ .arg("--path")
+ .arg(path)
+ .arg("--query")
+ .arg("all")
+ .output()?;
+ if !udev_output.status.success() {
+ bail!("could not run udevadm successfully for {}", path.display());
+ }
+ Ok(String::from_utf8(udev_output.stdout)?)
+}
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] [PATCH v1 docs 18/18] installation: add unattended documentation
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (16 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 17/18] auto-installer: add proxmox-installer-filter helper tool Aaron Lauterer
@ 2024-01-23 17:00 ` Aaron Lauterer
2024-02-08 10:26 ` [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Christoph Heiss
18 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-01-23 17:00 UTC (permalink / raw)
To: pve-devel
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
---
Once we have defined the process on how it can be started, what the ISO
is called and so forth, we can include that in the documentation.
We should also add an example section to showcase the possibilities
better.
Maybe also explain how the post/pre commands can be used. Maybe even how
to chroot into the installation to add further customizations. For the
latter, a helper chroot tool, like the arch-chroot might be useful to
have.
pve-installation.adoc | 267 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 267 insertions(+)
diff --git a/pve-installation.adoc b/pve-installation.adoc
index 1e909e2..5d6d887 100644
--- a/pve-installation.adoc
+++ b/pve-installation.adoc
@@ -300,6 +300,273 @@ following command:
# zpool add <pool-name> log </dev/path_to_fast_ssd>
----
+[[installation_auto]]
+Unattended Installation
+-----------------------
+
+// TODO: rework once it is clearer how the process actually works
+
+The unattended installation can help to automate the installation process from
+the very beginning. It needs the dedicated ISO image for unattended
+installations.
+
+
+For the automatic installation, the options that the regular installer would
+ask for, need to be provided in an answer file. The answer file can be placed
+on a USB flash drive. The volume needs to be labeled 'PROXMOXINST' and needs to
+contain the answer file named 'answer.toml'.
+
+The answer file allows to match to select the network card and disks used for
+the installation by certain properties of the devices.
+
+[[installation_auto_answer_file]]
+Answer file
+~~~~~~~~~~~
+
+The answer file is expected in `TOML` format. The following example shows an
+answer file that uses the DHCP provided network settings. It will use a ZFS
+Raid 10 with an 'ashift' of '12' and will use all Micron disks it can find.
+
+----
+[global]
+keyboard = "de"
+country = "at"
+fqdn = "pve-1.example.com"
+mailto = "mail@example.com"
+timezone = "Europe/Vienna"
+password = "123456"
+
+[network]
+use_dhcp = true
+
+[disks]
+filesystem = "zfs-raid10"
+zfs.ashift = 12
+filter.ID_SERIAL = "Micron_*"
+----
+
+Global Section
+^^^^^^^^^^^^^^
+
+This section contains the following keys:
+
+`keyboard`:: The keyboard layout. The following options are possible:
+----
+de de-ch dk en-gb en-us es fi fr fr-be fr-ca fr-ch hu is it jp lt mk nl no pl pt pt-br se si tr
+----
+
+`country`:: The country code in the two letter variant. For example `at`, `us`,
+ or `fr`.
+
+`fqdn`:: The fully qualified domain of the host. The domain part will be used
+as the search domain.
+
+`mailto`:: The default email address. Used for notifications.
+
+`timezone`:: The timezone in `tzdata` format. For example `Europe/Vienna` or
+`America/New_York`.
+
+`password`:: The password for the `root` user.
+
+`pre_command`:: A list of commands to run prior to the installation.
+
+`post_command`:: A list of commands run after the installation.
+// TODO: explain commands and list of available useful CLI tools in the iso
+
+`reboot_on_error`:: Set to `true` is the installer should automatically reboot
+if erros are encountered. The default behavior is to wait to give the
+administrator a chance to investigate why the unattended installation failed.
+
+
+Network Section
+^^^^^^^^^^^^^^^
+
+`use_dhcp`:: Set to `true` if the IP configuration received by DHCP should be
+used.
+
+`cidr`:: IP address in CIDR notation. For example `192.168.1.10/24`.
+
+`dns`:: IP address of the DNS server.
+
+`gateway`:: IP address of the default gateway.
+
+`filter`:: Filter against `UDEV` properties to select the network card. See
+xref:installation_auto_filter[Filters].
+
+
+Disks Section
+^^^^^^^^^^^^^
+
+`filesystem`:: The file system used for the installation. The options are:
+* `ext4`
+* `xfs`
+* `zfs-raid0`
+* `zfs-raid1`
+* `zfs-raid10`
+* `zfs-raidz1`
+* `zfs-raidz2`
+* `zfs-raidz3`
+* `btrfs-raid0`
+* `btrfs-raid1`
+* `btrfs-raid10`
+
+`disk_selection`:: List of disks to use. Useful if you are sure about the disk
+names. For example:
+
+----
+disk_selection = ["sda", "sdb"]
+----
+
+`filter_match`:: Can be `any` or `all`. Decides if a match of any filter is
+enough or if all filters need to match for a disk to be selected. Default is `any`.
+
+`filter`:: Filter against `UDEV` properties to select disks to install to. See
+xref:installation_auto_filter[Filters]. Filters won't be used if
+`disk_selection` is configured.
+
+`zfs`:: ZFS specific properties. See xref:advanced_zfs_options[Advanced ZFS Configuration Options]
+for more details. The properties are:
+ * `ashift`
+ * `checksum`
+ * `compress`
+ * `copies`
+ * `hdsize`
+
+`lvm`:: Advanced properties that can be used when `ext4` or `xfs` is used as `filesystem`.
+See xref:advanced_lvm_options[Advanced LVM Configuration Options] for more details. The properties are:
+ * `hdsize`
+ * `swapsize`
+ * `maxroot`
+ * `maxvz`
+ * `minfree`
+
+`btrfs`:: BTRFS specific settings. Currently there is only `hdsize`.
+
+[[installation_auto_filter]]
+Filters
+~~~~~~~
+
+Filters allow you to match against device properties exposed by `udevadm`. The
+`proxmox-installer-filter` utility can show the properties and let you test
+filters in advance. It is available in the installer environment (debug mode)
+and on {pve}.
+
+For example, to fetch information for disks, the output will be a list of all
+the information for the disks present:
+
+----
+# proxmox-installer-filter info -t disk
+[…]
+ "nvme3n1": {
+ "CURRENT_TAGS": ":systemd:",
+ "DEVLINKS": "/dev/disk/by-id/nvme-Micron_9300_MTFDHAL3T2TDR_194525XXXXXX_1 /dev/disk/by-diskseq/16 /dev/disk/by-id/nvme-Micron_9300_MTFDHAL3T2TDR_194525XXXXXX /dev/disk/by-path/pci-0000:04:00.0-nvme-1 /dev/disk/by-id/nvme-eui.000000000000001500a0750125xxxxxx",
+ "DEVNAME": "/dev/nvme3n1",
+ "DEVPATH": "/devices/pci0000:00/0000:00:01.4/0000:04:00.0/nvme/nvme3/nvme3n1",
+ "DEVTYPE": "disk",
+ "DISKSEQ": "16",
+ "ID_MODEL": "Micron_9300_MTFDHAL3T2TDR",
+ "ID_NSID": "1",
+ "ID_PATH": "pci-0000:04:00.0-nvme-1",
+ "ID_PATH_TAG": "pci-0000_04_00_0-nvme-1",
+ "ID_REVISION": "11300DN0",
+ "ID_SERIAL": "Micron_9300_MTFDHAL3T2TDR_194525XXXXXX_1",
+ "ID_SERIAL_SHORT": "1945250F1E8C",
+ "ID_WWN": "eui.000000000000001500a07501250f1e8c",
+ "MAJOR": "259",
+ "MINOR": "3",
+ "SUBSYSTEM": "block",
+ "SYSTEMD_READY": "1",
+ "TAGS": ":systemd:",
+ "USEC_INITIALIZED": "6371432"
+ }
+[…]
+----
+
+The key of the filter decides on which property it should be applied to. For
+example, to match against the vendor and model number of the disk, the filter
+in the answer file could look like this:
+
+----
+filter.ID_SERIAL = "Micron_9300*"
+----
+
+This will match for all Micron 9300 disks in the server. By running the
+following command we can verify which disks will be found:
+
+----
+# proxmox-installer-filter match disk 'ID_MODEL=Micron_9300*'
+[
+ "nvme0n1",
+ "nvme1n1",
+ "nvme2n1",
+ "nvme3n1"
+]
+----
+
+This filter would be enough if these four disks should be used for the {pve} installation.
+
+The `filter_match` parameter controls if all filters must apply, or if it is
+enough if any of the filters apply. This makes it possible to use different
+disk models for the installation.
+
+For example, if you want to use disks from different vendors, you could specify
+the following two filters to match against any Micron and Samsung disk:
+
+----
+filter.ID_SERIAL = "Micron*"
+filter.ID_MODEL = "Samsung*"
+----
+
+Two different keys are used as each key can only be used once. To test this
+with the `proxmox-install-filter` tool, the command would look like this:
+
+----
+proxmox-install-filter match disk 'ID_SERIAL=Micron*' 'ID_MODEL=Samsung*'
+----
+Since the CLI shell will most likely interpret the `*` globbing character
+itself, it is a good idea to put the filters inside single quotes `'`.
+
+NOTE: For network cards, only the first match will be used. The installer
+requires only one network card. More complex network setups can be configured
+after the installation. Using properties with unique identifiers will result in
+the most predictable behavior. For example, the MAC address.
+
+Filter Syntax
+^^^^^^^^^^^^^
+
+The following special characters can be used in filters:
+
+`?`:: matches any single character
+
+`*`:: matches any number of characters, can be none
+
+`[a]`, `[abc]`, `[0-9]`:: matches any single character inside the brackets, ranges are possible
+
+`[!a]`:: negate the filter, any single character but the ones specified
+
+
+Useful Properties
+^^^^^^^^^^^^^^^^^
+
+For network cards, the following properties can be useful:
+
+* `ID_NET_NAME`
+* `ID_NET_NAME_MAC`
+* `ID_VENDOR_FROM_DATABASE`
+* `ID_MODEL_FROM_DATABASE`
+
+For disks, these properties can be useful:
+
+* `DEVNAME`
+* `ID_SERIAL_SHORT`
+* `ID_WWN`
+* `ID_MODEL`
+* `ID_SERIAL`
+
+
+// TODO: showcase a more complicated answer file
+
+
ifndef::wiki[]
Install {pve} on Debian
--
2.39.2
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition Aaron Lauterer
@ 2024-01-31 13:50 ` Christoph Heiss
2024-02-23 14:27 ` Stefan Lendl
1 sibling, 0 replies; 32+ messages in thread
From: Christoph Heiss @ 2024-01-31 13:50 UTC (permalink / raw)
To: Aaron Lauterer; +Cc: Proxmox VE development discussion
Some comments inline, more-or-less just a (clippy) nit.
On Tue, Jan 23, 2024 at 06:00:43PM +0100, Aaron Lauterer wrote:
> Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
> ---
> proxmox-auto-installer/src/answer.rs | 147 +++++++++++++++++++++++++++
> proxmox-auto-installer/src/lib.rs | 1 +
> 2 files changed, 148 insertions(+)
> create mode 100644 proxmox-auto-installer/src/answer.rs
>
> diff --git a/proxmox-auto-installer/src/answer.rs b/proxmox-auto-installer/src/answer.rs
> new file mode 100644
> index 0000000..0f6c593
> --- /dev/null
> +++ b/proxmox-auto-installer/src/answer.rs
> @@ -0,0 +1,147 @@
[..]
> +
> +impl ZfsOptions {
> + pub fn new() -> ZfsOptions {
> + ZfsOptions {
> + ashift: None,
> + arc_max: None,
> + checksum: None,
> + compress: None,
> + copies: None,
> + hdsize: None,
> + }
> + }
> +}
Can be replaced by auto-deriving `Default` and then using `::default()`.
Would also save a quite a few lines.
Clippy screams a bit about it anyway:
warning: you should consider adding a `Default` implementation for `ZfsOptions`
--> proxmox-auto-installer/src/answer.rs:82:5
...
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#new_without_default
= note: `#[warn(clippy::new_without_default)]` on by default
[..]
> +
> +impl LvmOptions {
> + pub fn new() -> LvmOptions {
> + LvmOptions {
> + hdsize: None,
> + swapsize: None,
> + maxroot: None,
> + maxvz: None,
> + minfree: None,
> + }
> + }
> +}
^ Same here about auto-deriving `Default`.
> +
> +#[derive(Clone, Deserialize, Serialize, Debug)]
> +pub struct BtrfsOptions {
> + pub hdsize: Option<f64>,
> +}
> +
> +impl BtrfsOptions {
> + pub fn new() -> BtrfsOptions {
> + BtrfsOptions { hdsize: None }
> + }
> +}
^ Same here about auto-deriving `Default`.
> diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
> index e69de29..7813b98 100644
> --- a/proxmox-auto-installer/src/lib.rs
> +++ b/proxmox-auto-installer/src/lib.rs
> @@ -0,0 +1 @@
> +pub mod answer;
> --
> 2.39.2
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 07/18] auto-installer: add dependencies
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 07/18] auto-installer: add dependencies Aaron Lauterer
@ 2024-01-31 13:52 ` Christoph Heiss
0 siblings, 0 replies; 32+ messages in thread
From: Christoph Heiss @ 2024-01-31 13:52 UTC (permalink / raw)
To: Aaron Lauterer; +Cc: Proxmox VE development discussion
On Tue, Jan 23, 2024 at 06:00:42PM +0100, Aaron Lauterer wrote:
> Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
> ---
> proxmox-auto-installer/Cargo.toml | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/proxmox-auto-installer/Cargo.toml b/proxmox-auto-installer/Cargo.toml
> index 75cfb2c..211c605 100644
> --- a/proxmox-auto-installer/Cargo.toml
> +++ b/proxmox-auto-installer/Cargo.toml
> @@ -8,3 +8,7 @@ exclude = [ "build", "debian" ]
> homepage = "https://www.proxmox.com"
>
> [dependencies]
> +proxmox-installer-common = { path = "../proxmox-installer-common" }
> +serde = { version = "1.0", features = ["derive"] }
> +serde_json = "1.0"
> +toml = "0.5.11"
This should get an appropriate `Build-Depends` entry in debian/control
too, IMO. Currently, `librust-toml-0.5-dev` is pulled in transitively
anyway.
Same for the `clap` crate later in the series.
> --
> 2.39.2
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary Aaron Lauterer
@ 2024-02-06 11:33 ` Christoph Heiss
2024-02-08 14:18 ` Christoph Heiss
1 sibling, 0 replies; 32+ messages in thread
From: Christoph Heiss @ 2024-02-06 11:33 UTC (permalink / raw)
To: Proxmox VE development discussion
On Tue, Jan 23, 2024 at 06:00:49PM +0100, Aaron Lauterer wrote:
>
[..]
> diff --git a/proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs b/proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs
> new file mode 100644
> index 0000000..baf2bd2
> --- /dev/null
> +++ b/proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs
> @@ -0,0 +1,73 @@
[..]
> +fn main() -> ExitCode {
> + if let Err(err) = init_log() {
> + panic!("could not initilize logging: {err}");
> + }
> +
> + info!("Fetching answer file");
> + let answer = match fetch_answer() {
> + Ok(answer) => answer,
> + Err(err) => {
> + error!("Aborting: {}", err);
> + return ExitCode::FAILURE;
> + }
> + };
> +
> + let mut child = match Command::new("/usr/bin/proxmox-auto-installer")
Is relaying on hard-coded paths necessary here? Just using
"proxmox-auto-installer" should work fine too, as `Command` searches in
$PATH anyway for relative paths.
[..]
> diff --git a/proxmox-auto-installer/src/fetch_plugins/partition.rs b/proxmox-auto-installer/src/fetch_plugins/partition.rs
> new file mode 100644
> index 0000000..0552ddd
> --- /dev/null
> +++ b/proxmox-auto-installer/src/fetch_plugins/partition.rs
> @@ -0,0 +1,102 @@
[..]
> + /// Will mount source path to ANSWER_MP
> + ///
> + /// # Arguments
> + ///
> + /// * `source` - `PathBuf` of the source location
> + fn mount_part(source: PathBuf) -> Result<()> {
> + info!("Mounting partition at {ANSWER_MP}");
> + // create dir for mountpoint
> + match Command::new("/usr/bin/mkdir")
> + .arg(ANSWER_MP)
> + .arg("-p")
> + .output()
> + {
> + Ok(output) => {
> + if !output.status.success() {
> + warn!(
> + "Error creating mount path: {}",
> + String::from_utf8(output.stderr)?
> + )
> + }
> + }
> + Err(err) => bail!("Error creating mount path: {}", err),
> + }
This can replaced with a `std::fs::create_dir_all(ANSWER_MP)?`.
But if nothing else major turns up, cleaning it (both) up as a follow-up
patch is fine too I'd say - since it is a rather big series.
> + match Command::new("/usr/bin/mount")
^ Same as proxmox-auto-installer
[..]
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [pve-devel] applied: [PATCH v1 installer 04/18] Makefile: fix handling of multiple usr_bin files
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 04/18] Makefile: fix handling of multiple usr_bin files Aaron Lauterer
@ 2024-02-06 14:28 ` Thomas Lamprecht
0 siblings, 0 replies; 32+ messages in thread
From: Thomas Lamprecht @ 2024-02-06 14:28 UTC (permalink / raw)
To: Proxmox VE development discussion, Aaron Lauterer
Am 23/01/2024 um 18:00 schrieb Aaron Lauterer:
> Otherwise the build will fail once we define more than one USR_BIN
> file.
>
> Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
> ---
> Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>
applied this one already, thanks!
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 15/18] auto-installer: use glob crate for pattern matching
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 15/18] auto-installer: use glob crate for pattern matching Aaron Lauterer
@ 2024-02-08 9:01 ` Christoph Heiss
0 siblings, 0 replies; 32+ messages in thread
From: Christoph Heiss @ 2024-02-08 9:01 UTC (permalink / raw)
To: Aaron Lauterer; +Cc: Proxmox VE development discussion
On Tue, Jan 23, 2024 at 06:00:50PM +0100, Aaron Lauterer wrote:
> Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
> ---
> proxmox-auto-installer/Cargo.toml | 1 +
> proxmox-auto-installer/src/utils.rs | 48 +++++++++++------------------
> 2 files changed, 19 insertions(+), 30 deletions(-)
>
> diff --git a/proxmox-auto-installer/Cargo.toml b/proxmox-auto-installer/Cargo.toml
> index 078a333..158a0a8 100644
> --- a/proxmox-auto-installer/Cargo.toml
> +++ b/proxmox-auto-installer/Cargo.toml
> @@ -9,6 +9,7 @@ homepage = "https://www.proxmox.com"
>
> [dependencies]
> anyhow = "1.0"
> +glob = "0.3"
^ Same here again with a debian/control Build-Depends entry.
Rest LGTM.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
` (17 preceding siblings ...)
2024-01-23 17:00 ` [pve-devel] [PATCH v1 docs 18/18] installation: add unattended documentation Aaron Lauterer
@ 2024-02-08 10:26 ` Christoph Heiss
2024-02-08 10:34 ` Christoph Heiss
18 siblings, 1 reply; 32+ messages in thread
From: Christoph Heiss @ 2024-02-08 10:26 UTC (permalink / raw)
To: Aaron Lauterer; +Cc: Proxmox VE development discussion
Did some testing, doing various installs using
* different filesystems
* pre/post hooks
* simple udev matching for disks and network interfaces
I did not exercise the udev-matching exhaustively, but as it is pretty
generic, that should cover it.
The `proxmox-installer-filter` is a nice tooling addition as well!
Maybe we could also provide some tool in the future which would do some
(basic) sanity checking/validating on the `answer.toml`, to avoid people
having to do test cycles on a real machine.
As for the global `{pre,post}_commands` hooks - ,
So please consider this:
Tested-by: Christoph Heiss <c.heiss@proxmox.com>
Also, already left some review comments on the individual patches, but
nothing too major.
On Tue, Jan 23, 2024 at 06:00:35PM +0100, Aaron Lauterer wrote:
> This patch series adds the possibility to do an automated / unattended
> installation of Proxmox VE.
>
> It assumes that the patch series to use JSON output on the
> low-level-installer is already applied [1].
>
> The overall idea is that we will have a dedicated ISO for the unattended
> installation. It should be configured in such a way that it will start
> the installation without any user interaction.
> Though the integration in the installation environmend isn't part of
> this patch series.
>
> The information for the installer that is usually gathered interactively
> from the user is provided via an `answer.toml` file.
>
> The answer file allows to select disks and the network card via filters.
>
> The installer also allows to run custom commands pre and post
> installation. This should give users plenty of possibilities to either
> further customize/prepare the installation or integrate it into a larger
> automated installation setup.
> For example, one could issue HTTP requests to signal the status and
> progress of the installation.
>
>
> The install environment needs to call the 'proxmox-fetch-answer' binary.
> It tries to find the answer file and once found, will start the
> 'proxmox-auto-installer' binary and pass the contents to it via stdin.
>
> The auto-installer then parses the answer file and determines what
> parameters need to be passed to the low-level installer. For example,
> which disks and NIC to use, network IP settings and so forth.
>
> The current status reporting of the actual installation is kept rather
> simple.
>
> Both binaries log into the /tmp/ directory.
>
> There is a third binary, the 'proxmox-installer-filter'. It is meant as
> a pure utility for users to make it easier to see what properties they
> can write filters against and to test the filters.
>
>
> The fetch-answer binary is currently searching for a
> partition/file-system labeled 'proxmoxinst' in lower or uppercase. It
> can be located on an additioan USB flash drive, or maybe on the install
> medium itself if it is possible to write to it.
>
>
> We do have some ideas for additional steps to fetch an answer file. The
> main one is that we could download the answer file from a URL. Ideally
> we would send unique properties along with the request (MAC addresses,
> serial numbers, ...) so that it is possible to have a script on the
> receiving side that can then generate the answer file dynamically.
>
> The big question is, where the URL comes from, for which we have also
> some ideas:
> * custom DHCP options
> * kernel cmdline (might be an option with PXE boot)
> * TXT DNS record in a predefined subdomain of the search domain received
> via DHCP, basically a 'dig TXT proxmoxinst.{search domain}'.
> * We should also make it possible to provide an SSL fingerprint in a
> similar manner in case the listening server is not trusted out of the
> box.
>
> Other plans / ideas for the future:
>
> * add option to define remote SSH access (password and,or public key).
> This could make remote debugging in case of problems easier
>
>
> Regarding the patch series itself:
> The first patches are needed to move some code into the common crate and
> make structs/functions already in the common crate accessible.
>
> I did split up the individual parts of the auto installer into their own
> patches as much as possible, and (hopefully) in the order they depend on
> each other.
>
> Areas that can be improved/extended:
> * Testing possibility integrated in the Makefile
> * Documentation: explain process, additional examples for answer.toml
>
> [0] https://lists.proxmox.com/pipermail/pve-devel/2023-September/059020.html
> [1] https://lists.proxmox.com/pipermail/pve-devel/2023-December/060961.html
>
> installer: Aaron Lauterer (17):
> tui: common: move InstallConfig struct to common crate
> common: make InstallZfsOption members public
> common: tui: use BTreeMap for predictable ordering
> Makefile: fix handling of multiple usr_bin files
> low-level: add dump-udev command
> add auto-installer crate
> auto-installer: add dependencies
> auto-installer: add answer file definition
> auto-installer: add struct to hold udev info
> auto-installer: add utils
> auto-installer: add simple logging
> auto-installer: add tests for answer file parsing
> auto-installer: add auto-installer binary
> auto-installer: add fetch answer binary
> auto-installer: use glob crate for pattern matching
> auto-installer: utils: make get_udev_index functions public
> auto-installer: add proxmox-installer-filter helper tool
>
>
> docs: Aaron Lauterer (1):
> installation: add unattended documentation
>
> pve-installation.adoc | 267 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 267 insertions(+)
>
> Cargo.toml | 1 +
> Makefile | 9 +-
> Proxmox/Makefile | 1 +
> Proxmox/Sys/Udev.pm | 54 ++
> proxmox-auto-installer/Cargo.toml | 19 +
> proxmox-auto-installer/src/answer.rs | 148 ++++++
> .../src/bin/proxmox-auto-installer.rs | 192 ++++++++
> .../src/bin/proxmox-fetch-answer.rs | 73 +++
> .../src/bin/proxmox-installer-filter.rs | 298 +++++++++++
> .../src/fetch_plugins/mod.rs | 1 +
> .../src/fetch_plugins/partition.rs | 102 ++++
> proxmox-auto-installer/src/lib.rs | 5 +
> proxmox-auto-installer/src/log.rs | 38 ++
> proxmox-auto-installer/src/udevinfo.rs | 9 +
> proxmox-auto-installer/src/utils.rs | 461 ++++++++++++++++++
> proxmox-auto-installer/tests/parse-answer.rs | 102 ++++
> .../tests/resources/iso-info.json | 1 +
> .../tests/resources/locales.json | 1 +
> .../resources/parse_answer/disk_match.json | 29 ++
> .../resources/parse_answer/disk_match.toml | 14 +
> .../parse_answer/disk_match_all.json | 26 +
> .../parse_answer/disk_match_all.toml | 16 +
> .../parse_answer/disk_match_any.json | 33 ++
> .../parse_answer/disk_match_any.toml | 16 +
> .../tests/resources/parse_answer/minimal.json | 17 +
> .../tests/resources/parse_answer/minimal.toml | 14 +
> .../resources/parse_answer/nic_matching.json | 17 +
> .../resources/parse_answer/nic_matching.toml | 19 +
> .../tests/resources/parse_answer/readme | 4 +
> .../resources/parse_answer/specific_nic.json | 17 +
> .../resources/parse_answer/specific_nic.toml | 19 +
> .../tests/resources/parse_answer/zfs.json | 27 +
> .../tests/resources/parse_answer/zfs.toml | 19 +
> .../tests/resources/run-env-info.json | 1 +
> .../tests/resources/run-env-udev.json | 1 +
> proxmox-installer-common/src/setup.rs | 100 +++-
> proxmox-low-level-installer | 13 +
> proxmox-tui-installer/src/options.rs | 4 +-
> proxmox-tui-installer/src/setup.rs | 100 +---
> .../src/views/install_progress.rs | 4 +-
> 40 files changed, 1915 insertions(+), 110 deletions(-)
> create mode 100644 Proxmox/Sys/Udev.pm
> create mode 100644 proxmox-auto-installer/Cargo.toml
> create mode 100644 proxmox-auto-installer/src/answer.rs
> create mode 100644 proxmox-auto-installer/src/bin/proxmox-auto-installer.rs
> create mode 100644 proxmox-auto-installer/src/bin/proxmox-fetch-answer.rs
> create mode 100644 proxmox-auto-installer/src/bin/proxmox-installer-filter.rs
> create mode 100644 proxmox-auto-installer/src/fetch_plugins/mod.rs
> create mode 100644 proxmox-auto-installer/src/fetch_plugins/partition.rs
> create mode 100644 proxmox-auto-installer/src/lib.rs
> create mode 100644 proxmox-auto-installer/src/log.rs
> create mode 100644 proxmox-auto-installer/src/udevinfo.rs
> create mode 100644 proxmox-auto-installer/src/utils.rs
> create mode 100644 proxmox-auto-installer/tests/parse-answer.rs
> create mode 100644 proxmox-auto-installer/tests/resources/iso-info.json
> create mode 100644 proxmox-auto-installer/tests/resources/locales.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match.toml
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_all.toml
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/disk_match_any.toml
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/minimal.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/minimal.toml
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/nic_matching.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/nic_matching.toml
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/readme
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/specific_nic.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/specific_nic.toml
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/zfs.json
> create mode 100644 proxmox-auto-installer/tests/resources/parse_answer/zfs.toml
> create mode 100644 proxmox-auto-installer/tests/resources/run-env-info.json
> create mode 100644 proxmox-auto-installer/tests/resources/run-env-udev.json
>
> --
> 2.39.2
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation
2024-02-08 10:26 ` [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Christoph Heiss
@ 2024-02-08 10:34 ` Christoph Heiss
2024-02-08 11:32 ` Aaron Lauterer
0 siblings, 1 reply; 32+ messages in thread
From: Christoph Heiss @ 2024-02-08 10:34 UTC (permalink / raw)
To: Aaron Lauterer; +Cc: Proxmox VE development discussion
On Thu, Feb 08, 2024 at 11:26:01AM +0100, Christoph Heiss wrote:
> Did some testing, doing various installs using
> * different filesystems
> * pre/post hooks
> * simple udev matching for disks and network interfaces
>
> I did not exercise the udev-matching exhaustively, but as it is pretty
> generic, that should cover it.
>
> The `proxmox-installer-filter` is a nice tooling addition as well!
> Maybe we could also provide some tool in the future which would do some
> (basic) sanity checking/validating on the `answer.toml`, to avoid people
> having to do test cycles on a real machine.
>
> As for the global `{pre,post}_commands` hooks - ,
Whoops, got a bit cut of here. In any case; a though of mine:
For the post-hook (at least), these run after the installation has
completely finished. So changing anything inside the new installation -
for which this hook could be pretty useful - can only be done in a
rather hacky way.
This probably should be some future addition on its own, but maybe
provide the user also with some hook to modify the newly installed
system, possibly running the commands inside a chroot? Or simply passing
the (mount) path via environment variable or such.
But this will need some deeper hooking into to the installation code -
just spilling my thoughts here.
>
> So please consider this:
>
> Tested-by: Christoph Heiss <c.heiss@proxmox.com>
>
> Also, already left some review comments on the individual patches, but
> nothing too major.
>
> On Tue, Jan 23, 2024 at 06:00:35PM +0100, Aaron Lauterer wrote:
[..]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation
2024-02-08 10:34 ` Christoph Heiss
@ 2024-02-08 11:32 ` Aaron Lauterer
0 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-02-08 11:32 UTC (permalink / raw)
To: Christoph Heiss; +Cc: Proxmox VE development discussion
On 2/8/24 11:34, Christoph Heiss wrote:
> On Thu, Feb 08, 2024 at 11:26:01AM +0100, Christoph Heiss wrote:
>> Did some testing, doing various installs using
>> * different filesystems
>> * pre/post hooks
>> * simple udev matching for disks and network interfaces
>>
>> I did not exercise the udev-matching exhaustively, but as it is pretty
>> generic, that should cover it.
>>
>> The `proxmox-installer-filter` is a nice tooling addition as well!
>> Maybe we could also provide some tool in the future which would do some
>> (basic) sanity checking/validating on the `answer.toml`, to avoid people
>> having to do test cycles on a real machine.
good point. I guess just checking if it parses without errors is okay for a first version. Will work on something for v3.
>>
>> As for the global `{pre,post}_commands` hooks - ,
> Whoops, got a bit cut of here. In any case; a though of mine:
> For the post-hook (at least), these run after the installation has
> completely finished. So changing anything inside the new installation -
> for which this hook could be pretty useful - can only be done in a
> rather hacky way.
>
> This probably should be some future addition on its own, but maybe
> provide the user also with some hook to modify the newly installed
> system, possibly running the commands inside a chroot? Or simply passing
> the (mount) path via environment variable or such.
>
> But this will need some deeper hooking into to the installation code -
> just spilling my thoughts here.
yeah, we had the idea floating around of providing a small tool similar to "arch-chroot" to easily chroot into the installation.
>
>>
>> So please consider this:
>>
>> Tested-by: Christoph Heiss <c.heiss@proxmox.com>
>>
>> Also, already left some review comments on the individual patches, but
>> nothing too major.
>>
>> On Tue, Jan 23, 2024 at 06:00:35PM +0100, Aaron Lauterer wrote:
> [..]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary Aaron Lauterer
2024-02-06 11:33 ` Christoph Heiss
@ 2024-02-08 14:18 ` Christoph Heiss
2024-02-08 16:46 ` Aaron Lauterer
1 sibling, 1 reply; 32+ messages in thread
From: Christoph Heiss @ 2024-02-08 14:18 UTC (permalink / raw)
To: Aaron Lauterer; +Cc: Proxmox VE development discussion
Sorry for not including this in the first email.
On Tue, Jan 23, 2024 at 06:00:49PM +0100, Aaron Lauterer wrote:
[..]
> diff --git a/proxmox-auto-installer/src/fetch_plugins/partition.rs b/proxmox-auto-installer/src/fetch_plugins/partition.rs
> new file mode 100644
> index 0000000..0552ddd
> --- /dev/null
> +++ b/proxmox-auto-installer/src/fetch_plugins/partition.rs
> @@ -0,0 +1,102 @@
> +use anyhow::{bail, Result};
> +use log::{info, warn};
> +use std::fs::read_to_string;
> +use std::path::{Path, PathBuf};
> +use std::process::Command;
> +
> +static ANSWER_FILE: &str = "answer.toml";
> +static ANSWER_MP: &str = "/mnt/answer";
> +static PARTLABEL: &str = "proxmoxinst";
> +static SEARCH_PATH: &str = "/dev/disk/by-label";
> +
> +pub struct FetchFromPartition;
> +
> +impl FetchFromPartition {
> + /// Returns the contents of the answer file
> + pub fn get_answer() -> Result<String> {
> + let part_path = Self::scan_partlabels()?;
> + Self::mount_part(part_path)?;
> + Self::get_answer_file()
Before returning, the partition should be unmounted, as it is not needed
anymore after this point.
This also prevents some funny error that occurs if the installation
fails due to some error. The next time `proxmox-fetch-answer` is run, it
cannot mount the answer partition anymore, due to being already mounted.
> +
[..]
> +
> + /// Will mount source path to ANSWER_MP
> + ///
> + /// # Arguments
> + ///
> + /// * `source` - `PathBuf` of the source location
> + fn mount_part(source: PathBuf) -> Result<()> {
> + info!("Mounting partition at {ANSWER_MP}");
> + // create dir for mountpoint
> + match Command::new("/usr/bin/mkdir")
> + .arg(ANSWER_MP)
> + .arg("-p")
> + .output()
> + {
> + Ok(output) => {
> + if !output.status.success() {
> + warn!(
> + "Error creating mount path: {}",
> + String::from_utf8(output.stderr)?
> + )
> + }
> + }
> + Err(err) => bail!("Error creating mount path: {}", err),
> + }
> + match Command::new("/usr/bin/mount")
> + .arg(source)
> + .arg(ANSWER_MP)
I'd argue the partition should be mounted with `-o ro` and thus
readonly, just for the sake of it. We never write to it anyway and this
would prevent any (accidental) attempt to do so in the future.
> + .output()
> + {
> + Ok(output) => {
> + if output.status.success() {
> + Ok(())
> + } else {
> + warn!("Error mounting: {}", String::from_utf8(output.stderr)?);
> + Ok(())
> + }
> + }
> + Err(err) => bail!("Error mounting: {}", err),
> + }
> + }
> +
[..]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary
2024-02-08 14:18 ` Christoph Heiss
@ 2024-02-08 16:46 ` Aaron Lauterer
2024-02-16 16:34 ` Aaron Lauterer
0 siblings, 1 reply; 32+ messages in thread
From: Aaron Lauterer @ 2024-02-08 16:46 UTC (permalink / raw)
To: Christoph Heiss; +Cc: Proxmox VE development discussion
On 2/8/24 15:18, Christoph Heiss wrote:
> Sorry for not including this in the first email.
>
> On Tue, Jan 23, 2024 at 06:00:49PM +0100, Aaron Lauterer wrote:
> [..]
>> diff --git a/proxmox-auto-installer/src/fetch_plugins/partition.rs b/proxmox-auto-installer/src/fetch_plugins/partition.rs
>> new file mode 100644
>> index 0000000..0552ddd
>> --- /dev/null
>> +++ b/proxmox-auto-installer/src/fetch_plugins/partition.rs
>> @@ -0,0 +1,102 @@
>> +use anyhow::{bail, Result};
>> +use log::{info, warn};
>> +use std::fs::read_to_string;
>> +use std::path::{Path, PathBuf};
>> +use std::process::Command;
>> +
>> +static ANSWER_FILE: &str = "answer.toml";
>> +static ANSWER_MP: &str = "/mnt/answer";
>> +static PARTLABEL: &str = "proxmoxinst";
>> +static SEARCH_PATH: &str = "/dev/disk/by-label";
>> +
>> +pub struct FetchFromPartition;
>> +
>> +impl FetchFromPartition {
>> + /// Returns the contents of the answer file
>> + pub fn get_answer() -> Result<String> {
>> + let part_path = Self::scan_partlabels()?;
>> + Self::mount_part(part_path)?;
>> + Self::get_answer_file()
>
> Before returning, the partition should be unmounted, as it is not needed
> anymore after this point.
>
> This also prevents some funny error that occurs if the installation
> fails due to some error. The next time `proxmox-fetch-answer` is run, it
> cannot mount the answer partition anymore, due to being already mounted.
For now sure. If we add additional plugins to fetch the answer file via a URL, we might want to place the ssl fingerprint on the same partition. Then we would have to either mount it again, or wait with the unmount until we have reached the end of going through the plugins, as a cleanup measure.
>
>> +
> [..]
>> +
>> + /// Will mount source path to ANSWER_MP
>> + ///
>> + /// # Arguments
>> + ///
>> + /// * `source` - `PathBuf` of the source location
>> + fn mount_part(source: PathBuf) -> Result<()> {
>> + info!("Mounting partition at {ANSWER_MP}");
>> + // create dir for mountpoint
>> + match Command::new("/usr/bin/mkdir")
>> + .arg(ANSWER_MP)
>> + .arg("-p")
>> + .output()
>> + {
>> + Ok(output) => {
>> + if !output.status.success() {
>> + warn!(
>> + "Error creating mount path: {}",
>> + String::from_utf8(output.stderr)?
>> + )
>> + }
>> + }
>> + Err(err) => bail!("Error creating mount path: {}", err),
>> + }
>> + match Command::new("/usr/bin/mount")
>> + .arg(source)
>> + .arg(ANSWER_MP)
>
> I'd argue the partition should be mounted with `-o ro` and thus
> readonly, just for the sake of it. We never write to it anyway and this
> would prevent any (accidental) attempt to do so in the future.
Good point!
>
>> + .output()
>> + {
>> + Ok(output) => {
>> + if output.status.success() {
>> + Ok(())
>> + } else {
>> + warn!("Error mounting: {}", String::from_utf8(output.stderr)?);
>> + Ok(())
>> + }
>> + }
>> + Err(err) => bail!("Error mounting: {}", err),
>> + }
>> + }
>> +
> [..]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary
2024-02-08 16:46 ` Aaron Lauterer
@ 2024-02-16 16:34 ` Aaron Lauterer
0 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-02-16 16:34 UTC (permalink / raw)
To: pve-devel
On 2/8/24 17:46, Aaron Lauterer wrote:
>
>
> On 2/8/24 15:18, Christoph Heiss wrote:
>> Sorry for not including this in the first email.
>>
>> On Tue, Jan 23, 2024 at 06:00:49PM +0100, Aaron Lauterer wrote:
>> [..]
>>> diff --git a/proxmox-auto-installer/src/fetch_plugins/partition.rs b/proxmox-auto-installer/src/fetch_plugins/partition.rs
>>> new file mode 100644
>>> index 0000000..0552ddd
>>> --- /dev/null
>>> +++ b/proxmox-auto-installer/src/fetch_plugins/partition.rs
>>> @@ -0,0 +1,102 @@
>>> +use anyhow::{bail, Result};
>>> +use log::{info, warn};
>>> +use std::fs::read_to_string;
>>> +use std::path::{Path, PathBuf};
>>> +use std::process::Command;
>>> +
>>> +static ANSWER_FILE: &str = "answer.toml";
>>> +static ANSWER_MP: &str = "/mnt/answer";
>>> +static PARTLABEL: &str = "proxmoxinst";
>>> +static SEARCH_PATH: &str = "/dev/disk/by-label";
>>> +
>>> +pub struct FetchFromPartition;
>>> +
>>> +impl FetchFromPartition {
>>> + /// Returns the contents of the answer file
>>> + pub fn get_answer() -> Result<String> {
>>> + let part_path = Self::scan_partlabels()?;
>>> + Self::mount_part(part_path)?;
>>> + Self::get_answer_file()
>>
>> Before returning, the partition should be unmounted, as it is not needed
>> anymore after this point.
>>
>> This also prevents some funny error that occurs if the installation
>> fails due to some error. The next time `proxmox-fetch-answer` is run, it
>> cannot mount the answer partition anymore, due to being already mounted.
>
> For now sure. If we add additional plugins to fetch the answer file via a URL, we might want to place the ssl fingerprint on the same partition. Then we would have to either mount it again, or wait with the unmount until we have reached the end of going through the plugins, as a cleanup measure.
Actually, I think we want to keep it mounted. A warning when running the `proxmox-fetch-answer` once more, should be okay and will mainly happen during testing but not in a real-life scenario. It also makes it easy to place additional data on the partition and use it in a pre- or post-command. For example, scripts, config files, deb packages and so forth.
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition Aaron Lauterer
2024-01-31 13:50 ` Christoph Heiss
@ 2024-02-23 14:27 ` Stefan Lendl
2024-02-27 13:45 ` Aaron Lauterer
1 sibling, 1 reply; 32+ messages in thread
From: Stefan Lendl @ 2024-02-23 14:27 UTC (permalink / raw)
To: pve-devel
Aaron Lauterer <a.lauterer@proxmox.com> writes:
> Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
> ---
> proxmox-auto-installer/src/answer.rs | 147 +++++++++++++++++++++++++++
> proxmox-auto-installer/src/lib.rs | 1 +
> 2 files changed, 148 insertions(+)
> create mode 100644 proxmox-auto-installer/src/answer.rs
>
> diff --git a/proxmox-auto-installer/src/answer.rs b/proxmox-auto-installer/src/answer.rs
> new file mode 100644
> index 0000000..0f6c593
> --- /dev/null
> +++ b/proxmox-auto-installer/src/answer.rs
> @@ -0,0 +1,147 @@
> +use serde::{Deserialize, Serialize};
> +use std::collections::BTreeMap;
> +
> +#[derive(Clone, Deserialize, Debug)]
> +#[serde(rename_all = "lowercase")]
> +pub struct Answer {
> + pub global: Global,
> + pub network: Network,
> + pub disks: Disks,
> +}
> +
> +#[derive(Clone, Deserialize, Debug)]
> +pub struct Global {
> + pub country: String,
> + pub fqdn: String,
> + pub keyboard: String,
> + pub mailto: String,
> + pub timezone: String,
> + pub password: String,
> + pub pre_command: Option<Vec<String>>,
> + pub post_command: Option<Vec<String>>,
> + pub reboot_on_error: Option<bool>,
> +}
> +
> +#[derive(Clone, Deserialize, Debug)]
> +pub struct Network {
> + pub use_dhcp: Option<bool>,
> + pub cidr: Option<String>,
> + pub dns: Option<String>,
> + pub gateway: Option<String>,
> + // use BTreeMap to have keys sorted
> + pub filter: Option<BTreeMap<String, String>>,
> +}
> +
> +#[derive(Clone, Deserialize, Debug)]
> +pub struct Disks {
> + pub filesystem: Option<Filesystem>,
> + pub disk_selection: Option<Vec<String>>,
> + pub filter_match: Option<FilterMatch>,
> + // use BTreeMap to have keys sorted
> + pub filter: Option<BTreeMap<String, String>>,
> + pub zfs: Option<ZfsOptions>,
> + pub lvm: Option<LvmOptions>,
> + pub btrfs: Option<BtrfsOptions>,
> +}
instead of individual zfs, lvm and btrfs options you could have an enum
like this.
enum FsOptions{
Zfs(ZfsOptions),
Lvm(LvmOptions),
Btrfs(BtrfsOptions),
None,
}
This would also serve the purpose of the Filesystem prop.
> +
> +#[derive(Clone, Deserialize, Debug, PartialEq)]
> +#[serde(rename_all = "lowercase")]
> +pub enum FilterMatch {
> + Any,
> + All,
> +}
> +
> +#[derive(Clone, Deserialize, Serialize, Debug)]
> +#[serde(rename_all = "kebab-case")]
> +pub enum Filesystem {
> + Ext4,
> + Xfs,
> + ZfsRaid0,
> + ZfsRaid1,
> + ZfsRaid10,
> + ZfsRaidZ1,
> + ZfsRaidZ2,
> + ZfsRaidZ3,
> + BtrfsRaid0,
> + BtrfsRaid1,
> + BtrfsRaid10,
> +}
This could also be sth like:
Zfs { toplogy: ZfsTopolgy, options: ZfsOptions },
Btrfs { toplogy: BtrfsTopology, options: BtrfsOptions },
...
> +
> +#[derive(Clone, Deserialize, Debug)]
> +pub struct ZfsOptions {
> + pub ashift: Option<usize>,
> + pub arc_max: Option<usize>,
> + pub checksum: Option<ZfsChecksumOption>,
> + pub compress: Option<ZfsCompressOption>,
> + pub copies: Option<usize>,
> + pub hdsize: Option<f64>,
> +}
> +
> +impl ZfsOptions {
> + pub fn new() -> ZfsOptions {
> + ZfsOptions {
> + ashift: None,
> + arc_max: None,
> + checksum: None,
> + compress: None,
> + copies: None,
> + hdsize: None,
> + }
> + }
> +}
> +
> +#[derive(Copy, Clone, Debug, Default, Eq, PartialEq, Deserialize)]
> +#[serde(rename_all(deserialize = "lowercase"))]
> +pub enum ZfsCompressOption {
> + #[default]
> + On,
> + Off,
> + Lzjb,
> + Lz4,
> + Zle,
> + Gzip,
> + Zstd,
> +}
> +
> +#[derive(Copy, Clone, Debug, Default, Eq, PartialEq, Deserialize)]
> +#[serde(rename_all = "kebab-case")]
> +pub enum ZfsChecksumOption {
> + #[default]
> + On,
> + Off,
> + Fletcher2,
> + Fletcher4,
> + Sha256,
> +}
> +
> +#[derive(Clone, Deserialize, Serialize, Debug)]
> +pub struct LvmOptions {
> + pub hdsize: Option<f64>,
> + pub swapsize: Option<f64>,
> + pub maxroot: Option<f64>,
> + pub maxvz: Option<f64>,
> + pub minfree: Option<f64>,
> +}
> +
> +impl LvmOptions {
> + pub fn new() -> LvmOptions {
> + LvmOptions {
> + hdsize: None,
> + swapsize: None,
> + maxroot: None,
> + maxvz: None,
> + minfree: None,
> + }
> + }
> +}
> +
> +#[derive(Clone, Deserialize, Serialize, Debug)]
> +pub struct BtrfsOptions {
> + pub hdsize: Option<f64>,
> +}
> +
> +impl BtrfsOptions {
> + pub fn new() -> BtrfsOptions {
> + BtrfsOptions { hdsize: None }
> + }
> +}
> diff --git a/proxmox-auto-installer/src/lib.rs b/proxmox-auto-installer/src/lib.rs
> index e69de29..7813b98 100644
> --- a/proxmox-auto-installer/src/lib.rs
> +++ b/proxmox-auto-installer/src/lib.rs
> @@ -0,0 +1 @@
> +pub mod answer;
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition
2024-02-23 14:27 ` Stefan Lendl
@ 2024-02-27 13:45 ` Aaron Lauterer
0 siblings, 0 replies; 32+ messages in thread
From: Aaron Lauterer @ 2024-02-27 13:45 UTC (permalink / raw)
To: Proxmox VE development discussion, Stefan Lendl
On 2/23/24 15:27, Stefan Lendl wrote:
> Aaron Lauterer <a.lauterer@proxmox.com> writes:
>> +#[derive(Clone, Deserialize, Debug)]
>> +pub struct Disks {
>> + pub filesystem: Option<Filesystem>,
>> + pub disk_selection: Option<Vec<String>>,
>> + pub filter_match: Option<FilterMatch>,
>> + // use BTreeMap to have keys sorted
>> + pub filter: Option<BTreeMap<String, String>>,
>> + pub zfs: Option<ZfsOptions>,
>> + pub lvm: Option<LvmOptions>,
>> + pub btrfs: Option<BtrfsOptions>,
>> +}
>
> instead of individual zfs, lvm and btrfs options you could have an enum
> like this.
>
> enum FsOptions{
> Zfs(ZfsOptions),
> Lvm(LvmOptions),
> Btrfs(BtrfsOptions),
> None,
> }
>
> This would also serve the purpose of the Filesystem prop.
Thanks for the feedback! The main purpose here is to define the layout of the answer.toml file. While these would result in nicer data structures, I don't see how we could keep the current layout of the answer file we parse. I'll keep it in mind and see if it is possible to massage the current format into nicer structures.
>
>> +
>> +#[derive(Clone, Deserialize, Debug, PartialEq)]
>> +#[serde(rename_all = "lowercase")]
>> +pub enum FilterMatch {
>> + Any,
>> + All,
>> +}
>> +
>> +#[derive(Clone, Deserialize, Serialize, Debug)]
>> +#[serde(rename_all = "kebab-case")]
>> +pub enum Filesystem {
>> + Ext4,
>> + Xfs,
>> + ZfsRaid0,
>> + ZfsRaid1,
>> + ZfsRaid10,
>> + ZfsRaidZ1,
>> + ZfsRaidZ2,
>> + ZfsRaidZ3,
>> + BtrfsRaid0,
>> + BtrfsRaid1,
>> + BtrfsRaid10,
>> +}
>
> This could also be sth like:
> Zfs { toplogy: ZfsTopolgy, options: ZfsOptions },
> Btrfs { toplogy: BtrfsTopology, options: BtrfsOptions },
> ...
>
>
>> +
>> +#[derive(Clone, Deserialize, Debug)]
>> +pub struct ZfsOptions {
>> + pub ashift: Option<usize>,
>> + pub arc_max: Option<usize>,
>> + pub checksum: Option<ZfsChecksumOption>,
>> + pub compress: Option<ZfsCompressOption>,
>> + pub copies: Option<usize>,
>> + pub hdsize: Option<f64>,
>> +}
>> +
>> +impl ZfsOptions {
>> + pub fn new() -> ZfsOptions {
>> + ZfsOptions {
>> + ashift: None,
>> + arc_max: None,
>> + checksum: None,
>> + compress: None,
>> + copies: None,
>> + hdsize: None,
>> + }
>> + }
>> +}
>> +
>> +#[derive(Copy, Clone, Debug, Default, Eq, PartialEq, Deserialize)]
>> +#[serde(rename_all(deserialize = "lowercase"))]
>> +pub enum ZfsCompressOption {
>> + #[default]
>> + On,
>> + Off,
>> + Lzjb,
>> + Lz4,
>> + Zle,
>> + Gzip,
>> + Zstd,
>> +}
>> +
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2024-02-27 13:46 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-01-23 17:00 [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 01/18] tui: common: move InstallConfig struct to common crate Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 02/18] common: make InstallZfsOption members public Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 03/18] common: tui: use BTreeMap for predictable ordering Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 04/18] Makefile: fix handling of multiple usr_bin files Aaron Lauterer
2024-02-06 14:28 ` [pve-devel] applied: " Thomas Lamprecht
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 05/18] low-level: add dump-udev command Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 06/18] add auto-installer crate Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 07/18] auto-installer: add dependencies Aaron Lauterer
2024-01-31 13:52 ` Christoph Heiss
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 08/18] auto-installer: add answer file definition Aaron Lauterer
2024-01-31 13:50 ` Christoph Heiss
2024-02-23 14:27 ` Stefan Lendl
2024-02-27 13:45 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 09/18] auto-installer: add struct to hold udev info Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 10/18] auto-installer: add utils Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 11/18] auto-installer: add simple logging Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 12/18] auto-installer: add tests for answer file parsing Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 13/18] auto-installer: add auto-installer binary Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 14/18] auto-installer: add fetch answer binary Aaron Lauterer
2024-02-06 11:33 ` Christoph Heiss
2024-02-08 14:18 ` Christoph Heiss
2024-02-08 16:46 ` Aaron Lauterer
2024-02-16 16:34 ` Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 15/18] auto-installer: use glob crate for pattern matching Aaron Lauterer
2024-02-08 9:01 ` Christoph Heiss
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 16/18] auto-installer: utils: make get_udev_index functions public Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 installer 17/18] auto-installer: add proxmox-installer-filter helper tool Aaron Lauterer
2024-01-23 17:00 ` [pve-devel] [PATCH v1 docs 18/18] installation: add unattended documentation Aaron Lauterer
2024-02-08 10:26 ` [pve-devel] [PATCH v1 installer/docs 00/18] add automated/unattended installation Christoph Heiss
2024-02-08 10:34 ` Christoph Heiss
2024-02-08 11:32 ` Aaron Lauterer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox