[pve-devel] [PATCH v5 qemu-server 03/12] add memory parser

[Alexandre Derumier <aderumier@odiso.com>]

Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
---
 PVE/API2/Qemu.pm          |  7 ++--
 PVE/QemuConfig.pm         |  4 +--
 PVE/QemuMigrate.pm        |  6 ++--
 PVE/QemuServer.pm         | 27 ++++++++--------
 PVE/QemuServer/Helpers.pm |  3 +-
 PVE/QemuServer/Memory.pm  | 67 ++++++++++++++++++++++++++++++++-------
 6 files changed, 79 insertions(+), 35 deletions(-)

diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
index 587bb22..9b80da1 100644
--- a/PVE/API2/Qemu.pm
+++ b/PVE/API2/Qemu.pm
@@ -32,6 +32,7 @@ use PVE::QemuServer::Drive;
 use PVE::QemuServer::ImportDisk;
 use PVE::QemuServer::Monitor qw(mon_cmd);
 use PVE::QemuServer::Machine;
+use PVE::QemuServer::Memory qw(get_current_memory);
 use PVE::QemuMigrate;
 use PVE::RPCEnvironment;
 use PVE::AccessControl;
@@ -1489,8 +1490,6 @@ my $update_vm_api  = sub {
 
     my $storecfg = PVE::Storage::config();
 
-    my $defaults = PVE::QemuServer::load_defaults();
-
     &$resolve_cdrom_alias($param);
 
     # now try to verify all parameters
@@ -1608,7 +1607,9 @@ my $update_vm_api  = sub {
 	}
 
 	if ($param->{memory} || defined($param->{balloon})) {
-	    my $maxmem = $param->{memory} || $conf->{pending}->{memory} || $conf->{memory} || $defaults->{memory};
+
+	    my $memory = $param->{memory} || $conf->{pending}->{memory} || $conf->{memory};
+	    my $maxmem = get_current_memory($memory);
 	    my $balloon = defined($param->{balloon}) ? $param->{balloon} : $conf->{pending}->{balloon} || $conf->{balloon};
 
 	    die "balloon value too large (must be smaller than assigned memory)\n"
diff --git a/PVE/QemuConfig.pm b/PVE/QemuConfig.pm
index 051382c..999e658 100644
--- a/PVE/QemuConfig.pm
+++ b/PVE/QemuConfig.pm
@@ -12,6 +12,7 @@ use PVE::QemuServer::Helpers;
 use PVE::QemuServer::Monitor qw(mon_cmd);
 use PVE::QemuServer;
 use PVE::QemuServer::Machine;
+use PVE::QemuServer::Memory qw(get_current_memory);
 use PVE::Storage;
 use PVE::Tools;
 use PVE::Format qw(render_bytes render_duration);
@@ -208,8 +209,7 @@ sub __snapshot_save_vmstate {
 	$target = PVE::QemuServer::find_vmstate_storage($conf, $storecfg);
     }
 
-    my $defaults = PVE::QemuServer::load_defaults();
-    my $mem_size = $conf->{memory} // $defaults->{memory};
+    my $mem_size = get_current_memory($conf->{memory});
     my $driver_state_size = 500; # assume 500MB is enough to safe all driver state;
     # our savevm-start does live-save of the memory until the space left in the
     # volume is just enough for the remaining memory content + internal state
diff --git a/PVE/QemuMigrate.pm b/PVE/QemuMigrate.pm
index 09cc1d8..f86fdbe 100644
--- a/PVE/QemuMigrate.pm
+++ b/PVE/QemuMigrate.pm
@@ -26,6 +26,7 @@ use PVE::QemuServer::Drive;
 use PVE::QemuServer::Helpers qw(min_version);
 use PVE::QemuServer::Machine;
 use PVE::QemuServer::Monitor qw(mon_cmd);
+use PVE::QemuServer::Memory qw(get_current_memory);
 use PVE::QemuServer;
 
 use PVE::AbstractMigrate;
@@ -1026,7 +1027,8 @@ sub phase2_start_remote_cluster {
     my $remote_vmid = $self->{opts}->{remote}->{vmid};
 
     # like regular start but with some overhead accounted for
-    my $timeout = PVE::QemuServer::Helpers::config_aware_timeout($self->{vmconf}) + 10;
+    my $memory = get_current_memory($self->{vmconf}->{memory});
+    my $timeout = PVE::QemuServer::Helpers::config_aware_timeout($self->{vmconf}, $memory) + 10;
 
     my $res = PVE::Tunnel::write_tunnel($self->{tunnel}, $timeout, "start", $params);
 
@@ -1181,7 +1183,7 @@ sub phase2 {
     $qemu_migrate_params->{'downtime-limit'} = int($migrate_downtime);
 
     # set cachesize to 10% of the total memory
-    my $memory =  $conf->{memory} || $defaults->{memory};
+    my $memory = get_current_memory($conf->{memory});
     my $cachesize = int($memory * 1048576 / 10);
     $cachesize = round_powerof2($cachesize);
 
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index a1a8b93..64ae722 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -53,7 +53,7 @@ use PVE::QemuServer::CGroup;
 use PVE::QemuServer::CPUConfig qw(print_cpu_device get_cpu_options);
 use PVE::QemuServer::Drive qw(is_valid_drivename drive_is_cloudinit drive_is_cdrom drive_is_read_only parse_drive print_drive);
 use PVE::QemuServer::Machine;
-use PVE::QemuServer::Memory;
+use PVE::QemuServer::Memory qw(get_current_memory);
 use PVE::QemuServer::Monitor qw(mon_cmd);
 use PVE::QemuServer::PCI qw(print_pci_addr print_pcie_addr print_pcie_root_port parse_hostpci);
 use PVE::QemuServer::USB qw(parse_usb_device);
@@ -341,11 +341,9 @@ my $confdesc = {
     },
     memory => {
 	optional => 1,
-	type => 'integer',
-	description => "Amount of RAM for the VM in MiB. This is the maximum available memory when"
-	    ." you use the balloon device.",
-	minimum => 16,
-	default => 512,
+	type => 'string',
+	description => "Memory properties.",
+	format => $PVE::QemuServer::Memory::memory_fmt
     },
     balloon => {
 	optional => 1,
@@ -2948,8 +2946,7 @@ sub vmstatus {
 	$d->{cpus} = $conf->{vcpus} if $conf->{vcpus};
 
 	$d->{name} = $conf->{name} || "VM $vmid";
-	$d->{maxmem} = $conf->{memory} ? $conf->{memory}*(1024*1024)
-	    : $defaults->{memory}*(1024*1024);
+	$d->{maxmem} = get_current_memory($conf->{memory})*(1024*1024);
 
 	if ($conf->{balloon}) {
 	    $d->{balloon_min} = $conf->{balloon}*(1024*1024);
@@ -3885,7 +3882,7 @@ sub config_to_command {
     }
 
     PVE::QemuServer::Memory::config(
-	$conf, $vmid, $sockets, $cores, $defaults, $hotplug_features->{memory}, $cmd);
+	$conf, $vmid, $sockets, $cores, $hotplug_features->{memory}, $cmd);
 
     push @$cmd, '-S' if $conf->{freeze};
 
@@ -5049,7 +5046,7 @@ sub vmconfig_hotplug_pending {
 		# enable balloon device is not hotpluggable
 		die "skip\n" if defined($conf->{balloon}) && $conf->{balloon} == 0;
 		# here we reset the ballooning value to memory
-		my $balloon = $conf->{memory} || $defaults->{memory};
+		my $balloon = get_current_memory($conf->{memory});
 		mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
 	    } elsif ($fast_plug_option->{$opt}) {
 		# do nothing
@@ -5062,7 +5059,7 @@ sub vmconfig_hotplug_pending {
 		vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
 	    } elsif ($opt =~ m/^memory$/) {
 		die "skip\n" if !$hotplug_features->{memory};
-		PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults);
+		PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf);
 	    } elsif ($opt eq 'cpuunits') {
 		$cgroup->change_cpu_shares(undef);
 	    } elsif ($opt eq 'cpulimit') {
@@ -5117,7 +5114,8 @@ sub vmconfig_hotplug_pending {
 
 		# allow manual ballooning if shares is set to zero
 		if ((defined($conf->{shares}) && ($conf->{shares} == 0))) {
-		    my $balloon = $conf->{pending}->{balloon} || $conf->{memory} || $defaults->{memory};
+		    my $memory = get_current_memory($conf->{memory});
+		    my $balloon = $conf->{pending}->{balloon} || $memory;
 		    mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
 		}
 	    } elsif ($opt =~ m/^net(\d+)$/) {
@@ -5137,7 +5135,7 @@ sub vmconfig_hotplug_pending {
 				     $vmid, $opt, $value, $arch, $machine_type);
 	    } elsif ($opt =~ m/^memory$/) { #dimms
 		die "skip\n" if !$hotplug_features->{memory};
-		$value = PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $value);
+		$value = PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $value);
 	    } elsif ($opt eq 'cpuunits') {
 		my $new_cpuunits = PVE::CGroup::clamp_cpu_shares($conf->{pending}->{$opt}); #clamp
 		$cgroup->change_cpu_shares($new_cpuunits);
@@ -5815,7 +5813,8 @@ sub vm_start_nolock {
 	push @$cmd, '-S';
     }
 
-    my $start_timeout = $params->{timeout} // config_aware_timeout($conf, $resume);
+    my $memory = get_current_memory($conf->{memory});
+    my $start_timeout = $params->{timeout} // config_aware_timeout($conf, $memory, $resume);
 
     my $pci_devices = {}; # host pci devices
     for (my $i = 0; $i < $PVE::QemuServer::PCI::MAX_HOSTPCI_DEVICES; $i++)  {
diff --git a/PVE/QemuServer/Helpers.pm b/PVE/QemuServer/Helpers.pm
index e91f906..9115d50 100644
--- a/PVE/QemuServer/Helpers.pm
+++ b/PVE/QemuServer/Helpers.pm
@@ -143,8 +143,7 @@ sub version_cmp {
 }
 
 sub config_aware_timeout {
-    my ($config, $is_suspended) = @_;
-    my $memory = $config->{memory};
+    my ($config, $memory, $is_suspended) = @_;
     my $timeout = 30;
 
     # Based on user reported startup time for vm with 512GiB @ 4-5 minutes
diff --git a/PVE/QemuServer/Memory.pm b/PVE/QemuServer/Memory.pm
index 0f4229c..e1b811f 100644
--- a/PVE/QemuServer/Memory.pm
+++ b/PVE/QemuServer/Memory.pm
@@ -8,10 +8,42 @@ use PVE::Exception qw(raise raise_param_exc);
 
 use PVE::QemuServer;
 use PVE::QemuServer::Monitor qw(mon_cmd);
+use base qw(Exporter);
+
+our @EXPORT_OK = qw(
+get_current_memory
+);
 
 my $MAX_NUMA = 8;
 my $STATICMEM = 1024;
 
+our $memory_fmt = {
+    current => {
+	description => "Current amount of online RAM for the VM in MiB. This is the maximum available memory when"
+	    ." you use the balloon device.",
+	type => 'integer',
+	default_key => 1,
+	minimum => 16,
+	default => 512,
+    },
+};
+
+sub print_memory {
+    my $memory = shift;
+
+    return PVE::JSONSchema::print_property_string($memory, $memory_fmt);
+}
+
+sub parse_memory {
+    my ($value) = @_;
+
+    return { current => $memory_fmt->{current}->{default} } if !defined($value);
+
+    my $res = PVE::JSONSchema::parse_property_string($memory_fmt, $value);
+
+    return $res;
+}
+
 my $_host_bits;
 sub get_host_phys_address_bits {
     return $_host_bits if defined($_host_bits);
@@ -63,6 +95,13 @@ my sub get_max_mem {
     return $bits_to_max_mem > 4*1024*1024 ? 4*1024*1024 : $bits_to_max_mem;
 }
 
+sub get_current_memory {
+    my ($value) = @_;
+
+    my $memory = parse_memory($value);
+    return $memory->{current};
+}
+
 sub get_numa_node_list {
     my ($conf) = @_;
     my @numa_map;
@@ -129,16 +168,19 @@ sub foreach_dimm{
 }
 
 sub qemu_memory_hotplug {
-    my ($vmid, $conf, $defaults, $value) = @_;
+    my ($vmid, $conf, $value) = @_;
 
     return $value if !PVE::QemuServer::check_running($vmid);
 
-    my $sockets = $conf->{sockets} || 1;
+    my $oldmem = parse_memory($conf->{memory});
+    my $newmem = parse_memory($value);
+
+    return $value if $newmem->{current} == $oldmem->{current};
 
-    my $memory = $conf->{memory} || $defaults->{memory};
-    $value = $defaults->{memory} if !$value;
-    return $value if $value == $memory;
+    my $memory = $oldmem->{current};
+    $value = $newmem->{current};
 
+    my $sockets = $conf->{sockets} || 1;
     my $static_memory = $STATICMEM;
     $static_memory = $static_memory * $sockets if ($conf->{hugepages} && $conf->{hugepages} == 1024);
 
@@ -153,7 +195,7 @@ sub qemu_memory_hotplug {
 	foreach_dimm($conf, $vmid, $value, $sockets, sub {
 	    my ($conf, $vmid, $name, $dimm_size, $numanode, $current_size, $memory) = @_;
 
-		return if $current_size <= $conf->{memory};
+		return if $current_size <= get_current_memory($conf->{memory});
 
 		if ($conf->{hugepages}) {
 		    $numa_hostmap = get_numa_guest_to_host_map($conf) if !$numa_hostmap;
@@ -192,7 +234,8 @@ sub qemu_memory_hotplug {
 		    die $err;
 		}
 		#update conf after each succesful module hotplug
-		$conf->{memory} = $current_size;
+		$newmem->{current} = $current_size;
+		$conf->{memory} = print_memory($newmem);
 		PVE::QemuConfig->write_config($vmid, $conf);
 	});
 
@@ -220,7 +263,8 @@ sub qemu_memory_hotplug {
 	    }
 	    $current_size -= $dimm_size;
 	    #update conf after each succesful module unplug
-	    $conf->{memory} = $current_size;
+            $newmem->{current} = $current_size;
+            $conf->{memory} = print_memory($newmem);
 
 	    eval { PVE::QemuServer::qemu_objectdel($vmid, "mem-$name"); };
 	    PVE::QemuConfig->write_config($vmid, $conf);
@@ -247,9 +291,9 @@ sub qemu_memdevices_list {
 }
 
 sub config {
-    my ($conf, $vmid, $sockets, $cores, $defaults, $hotplug, $cmd) = @_;
+    my ($conf, $vmid, $sockets, $cores, $hotplug, $cmd) = @_;
 
-    my $memory = $conf->{memory} || $defaults->{memory};
+    my $memory = get_current_memory($conf->{memory});
     my $static_memory = 0;
 
     if ($hotplug) {
@@ -470,8 +514,7 @@ sub hugepages_topology {
 
     return if !$conf->{numa};
 
-    my $defaults = PVE::QemuServer::load_defaults();
-    my $memory = $conf->{memory} || $defaults->{memory};
+    my $memory = get_current_memory($conf->{memory});
     my $static_memory = 0;
     my $sockets = $conf->{sockets} || 1;
     my $numa_custom_topology = undef;
-- 
2.30.2