From: "Fabian Grünbichler" <f.gruenbichler@proxmox.com>
To: Proxmox VE development discussion <pve-devel@lists.proxmox.com>
Subject: Re: [pve-devel] [PATCH pve-kernel-meta/proxmox-ve v2] proxmox-boot: add kernel pinning functionality (#3761)
Date: Thu, 10 Feb 2022 11:57:58 +0100 [thread overview]
Message-ID: <1644490514.p27tcbmg79.astroid@nora.none> (raw)
In-Reply-To: <<20220204184538.3139247-1-s.ivanov@proxmox.com>
On February 4, 2022 7:45 pm, Stoiko Ivanov wrote:
> changes v1->v2:
> * incorporated the feedback on the v1 (by Aaron and Fabian - huge thx!):
> ** a next-boot pin is now handled independently from a pin - i.e. if you
> both pin a kernel and set one for the next-boot - the system afterwards
> keeps the pinned version (instead of the latest)
> ** change from modifying /etc/default/grub to creating a snippet in
> /etc/default/grub.d/proxmox-boot-pin.cfg - I did not see a need for having
> two pinning files there (since they get written both at each relevant
> invocation anyways - thus also no need for prefixing with y_ and z_
> ** the semantics of unpin changed (it now takes an optional argument to
> remove the next-boot-pin only (made the cleanup-service cleaner)
> ** added a check to the apthook in proxmox-ve as Fabian suggested
> * changed the semantics of get_first_line - to check for file existence
> itself, since it makes using it shorter at almost all call-sites
> * fixed two perlcritic warnings in the pve apthook (which is quite
> independent of the series)
>
> again tested on 3 VMs (ext4, zfs+uefi, zfs+legacy) - but would be grateful
> if you find some use-case apart from - pin permanent, pin next-boot, reboot,
> reboot.
some small things noted as replies to patches (might warrant a v3 - so
I'll wait for your replies ;)), and the following proxmox-ve followups
as discussed off-list:
diff --git a/debian/apthook/pve-apt-hook b/debian/apthook/pve-apt-hook
index 6de56c4..ff9877e 100755
--- a/debian/apthook/pve-apt-hook
+++ b/debian/apthook/pve-apt-hook
@@ -15,12 +15,12 @@ my $log = sub {
print "W: ($hook_name) $line";
};
-if (!defined $fd || $fd == 0) {
+if (!defined $fd || $fd == 0 || $fd !~ /^\d+$/) {
$log->("APT_HOOK_INFO_FD not correctly defined, skipping apt-pve-hook checks\n");
exit 0;
}
-open(my $fh, q{<&=}, "${fd}") or die "E: could not open APT_HOOK_INFO_FD (${fd}) - $!\n";
+open(my $fh, "<&=", $fd) or die "E: could not open APT_HOOK_INFO_FD (${fd}) - $!\n";
my $cleanup = sub {
my ($rc, $confirm) = @_;
@@ -99,8 +99,8 @@ while (my $line = <$fh>) {
if ($action eq '**REMOVE**') {
my $next_boot_ver = $file_read_firstline->("/etc/kernel/next-boot-pin");
my $pinned_ver = $file_read_firstline->("/etc/kernel/proxmox-boot-pin");
- my $remove_pinned_ver = ($next_boot_ver && $pkg =~ /$next_boot_ver/);
- $remove_pinned_ver ||= ($pinned_ver && $pkg =~ /$pinned_ver/);
+ my $remove_pinned_ver = ($next_boot_ver && $pkg =~ /${next_boot_ver}$/);
+ $remove_pinned_ver ||= ($pinned_ver && $pkg =~ /${pinned_ver}$/);
if ($remove_pinned_ver) {
$log->("!! WARNING !!\n");
$log->("You are attempting to remove the currently pinned kernel '${pkg}'!\n");
>
>
> original cover letter of v1:
> The following series adds:
> * proxmox-boot-tool kernel pin <kabi-version> (to permanently set the
> default entry of the respective bootloader)
> * proxmox-boot-tool kernel unpin (to undo a previous pin)
> * proxmox-boot-tool kernel next-boot (to do a pin+touch a file, which causes
> an unpin on next boot)
>
> This is the first functionality which is available for 'regular grub-setups'
> (i.e. systems setup with lvm-thin with our ISO or systems installed on top
> of plain debian) as well.
>
> The first two patches are cleanup+refactoring (and should not change any
> functionality)
>
> The choices (those I think might benefit from a bit of feedback) for this
> implementation were:
> * for grub - automaticially rewrite '/etc/default/grub' (as this is where
> I'd look to check whether some default is set)
> * for systemd - set the entry in the loader.conf and not in the efivars
> (`bootctl set-default/set-once`) - mostly from my bias towards config
> files instead of UEFI vars (depending on implementation quality of the
> UEFI) - another reason was to keep the implementation close for both
> boot-loaders
> * for p-b-t booted systems the need to run `p-b-t refresh` manually
> afterwards (following the behavior of `p-b-t kernel add/remove`) could
> be changed to invoking the refresh directly (as with non-p-b-t booted
> systems). Especially since it might make sense to 'add' multiple kernels
> and then do the mount+copy+configupdate only once, whereas you can only
> pin on version anyways
>
> Tested on three VMs installed from the 7.1 ISO (UEFI+ZFS, legacy+ZFS,
> UEFI+lvm-thin).
>
>
> proxmox-kernel-meta:
> Stoiko Ivanov (4):
> proxmox-boot: return empty if file does not exist in get_first_line
> proxmox-boot: fix #3671 add pin/unpin for kernel-version
> proxmox-boot: add kernel next-boot command
> proxmox-boot: add pin/unpin functionality for non-p-b-t systems
>
> bin/proxmox-boot-tool | 76 ++++++++++++++++++++++-
> debian/pve-kernel-helper.install | 1 +
> debian/rules | 3 +
> proxmox-boot/Makefile | 4 ++
> proxmox-boot/functions | 45 ++++++++++++++
> proxmox-boot/proxmox-boot-cleanup.service | 13 ++++
> proxmox-boot/zz-proxmox-boot | 8 +++
> 7 files changed, 147 insertions(+), 3 deletions(-)
> create mode 100644 proxmox-boot/proxmox-boot-cleanup.service
>
> proxmox-ve:
> Stoiko Ivanov (2):
> apt-hook: fix perlcritic warnings
> apt-hook: add check preventing the removal of pinned kernels
>
> debian/apthook/pve-apt-hook | 34 ++++++++++++++++++++++++++++++++--
> 1 file changed, 32 insertions(+), 2 deletions(-)
>
> --
> 2.30.2
>
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@lists.proxmox.com
> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
>
prev parent reply other threads:[~2022-02-10 10:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-04 18:45 Stoiko Ivanov
2022-02-04 18:45 ` [pve-devel] [PATCH pve-kernel-meta v2 1/4] proxmox-boot: return empty if file does not exist in get_first_line Stoiko Ivanov
2022-02-04 18:45 ` [pve-devel] [PATCH pve-kernel-meta v2 2/4] proxmox-boot: fix #3671 add pin/unpin for kernel-version Stoiko Ivanov
[not found] ` <<20220204184538.3139247-3-s.ivanov@proxmox.com>
2022-02-10 10:58 ` Fabian Grünbichler
2022-02-04 18:45 ` [pve-devel] [PATCH pve-kernel-meta v2 3/4] proxmox-boot: add kernel next-boot command Stoiko Ivanov
[not found] ` <<20220204184538.3139247-4-s.ivanov@proxmox.com>
2022-02-10 10:58 ` Fabian Grünbichler
2022-02-04 18:45 ` [pve-devel] [PATCH pve-kernel-meta v2 4/4] proxmox-boot: add pin/unpin functionality for non-p-b-t systems Stoiko Ivanov
2022-02-04 18:45 ` [pve-devel] [PATCH proxmox-ve v2 1/2] apt-hook: fix perlcritic warnings Stoiko Ivanov
2022-02-04 18:45 ` [pve-devel] [PATCH proxmox-ve v2 2/2] apt-hook: add check preventing the removal of pinned kernels Stoiko Ivanov
2022-02-09 17:22 ` Stoiko Ivanov
[not found] ` <<20220204184538.3139247-1-s.ivanov@proxmox.com>
2022-02-10 10:57 ` Fabian Grünbichler [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1644490514.p27tcbmg79.astroid@nora.none \
--to=f.gruenbichler@proxmox.com \
--cc=pve-devel@lists.proxmox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox