* [pve-devel] applied-series: [PATCH docs 1/2] fix #2526: network config: change underscore to dash
[not found] <20200513144654.31184-1-a.lauterer@proxmox.com>
@ 2020-08-11 13:33 ` Fabian Grünbichler
0 siblings, 0 replies; only message in thread
From: Fabian Grünbichler @ 2020-08-11 13:33 UTC (permalink / raw)
To: PVE development discussion
On May 13, 2020 4:46 pm, Aaron Lauterer wrote:
> The network config examples use the underscore but our tooling
> generates the configs with dashes.
>
> Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
> ---
>
> pve-network.adoc | 80 ++++++++++++++++++++++++------------------------
> pvecm.adoc | 6 ++--
> 2 files changed, 43 insertions(+), 43 deletions(-)
>
> diff --git a/pve-network.adoc b/pve-network.adoc
> index 8f3af0d..1c5ae17 100644
> --- a/pve-network.adoc
> +++ b/pve-network.adoc
> @@ -161,9 +161,9 @@ iface vmbr0 inet static
> address 192.168.10.2
> netmask 255.255.255.0
> gateway 192.168.10.1
> - bridge_ports eno1
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports eno1
> + bridge-stp off
> + bridge-fd 0
> ----
>
> Virtual machines behave as if they were directly connected to the
> @@ -209,9 +209,9 @@ auto vmbr0
> iface vmbr0 inet static
> address 203.0.113.17
> netmask 255.255.255.248
> - bridge_ports none
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports none
> + bridge-stp off
> + bridge-fd 0
> ----
>
>
> @@ -239,9 +239,9 @@ auto vmbr0
> iface vmbr0 inet static
> address 10.10.10.1
> netmask 255.255.255.0
> - bridge_ports none
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports none
> + bridge-stp off
> + bridge-fd 0
>
> post-up echo 1 > /proc/sys/net/ipv4/ip_forward
> post-up iptables -t nat -A POSTROUTING -s '10.10.10.0/24' -o eno1 -j MASQUERADE
> @@ -357,18 +357,18 @@ iface bond0 inet static
> slaves eno1 eno2
> address 192.168.1.2
> netmask 255.255.255.0
> - bond_miimon 100
> - bond_mode 802.3ad
> - bond_xmit_hash_policy layer2+3
> + bond-miimon 100
> + bond-mode 802.3ad
> + bond-xmit-hash-policy layer2+3
>
> auto vmbr0
> iface vmbr0 inet static
> address 10.10.10.2
> netmask 255.255.255.0
> gateway 10.10.10.1
> - bridge_ports eno1
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports eno1
> + bridge-stp off
> + bridge-fd 0
>
> ----
>
> @@ -389,18 +389,18 @@ iface eno2 inet manual
> auto bond0
> iface bond0 inet manual
> slaves eno1 eno2
> - bond_miimon 100
> - bond_mode 802.3ad
> - bond_xmit_hash_policy layer2+3
> + bond-miimon 100
> + bond-mode 802.3ad
> + bond-xmit-hash-policy layer2+3
>
> auto vmbr0
> iface vmbr0 inet static
> address 10.10.10.2
> netmask 255.255.255.0
> gateway 10.10.10.1
> - bridge_ports bond0
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports bond0
> + bridge-stp off
> + bridge-fd 0
>
> ----
>
> @@ -474,15 +474,15 @@ iface vmbr0v5 inet static
> address 10.10.10.2
> netmask 255.255.255.0
> gateway 10.10.10.1
> - bridge_ports eno1.5
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports eno1.5
> + bridge-stp off
> + bridge-fd 0
>
> auto vmbr0
> iface vmbr0 inet manual
> - bridge_ports eno1
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports eno1
> + bridge-stp off
> + bridge-fd 0
>
> ----
>
> @@ -502,10 +502,10 @@ iface vmbr0.5 inet static
>
> auto vmbr0
> iface vmbr0 inet manual
> - bridge_ports eno1
> - bridge_stp off
> - bridge_fd 0
> - bridge_vlan_aware yes
> + bridge-ports eno1
> + bridge-stp off
> + bridge-fd 0
> + bridge-vlan-aware yes
> ----
>
> The next example is the same setup but a bond is used to
> @@ -523,9 +523,9 @@ iface eno2 inet manual
> auto bond0
> iface bond0 inet manual
> slaves eno1 eno2
> - bond_miimon 100
> - bond_mode 802.3ad
> - bond_xmit_hash_policy layer2+3
> + bond-miimon 100
> + bond-mode 802.3ad
> + bond-xmit-hash-policy layer2+3
>
> iface bond0.5 inet manual
>
> @@ -534,15 +534,15 @@ iface vmbr0v5 inet static
> address 10.10.10.2
> netmask 255.255.255.0
> gateway 10.10.10.1
> - bridge_ports bond0.5
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports bond0.5
> + bridge-stp off
> + bridge-fd 0
>
> auto vmbr0
> iface vmbr0 inet manual
> - bridge_ports bond0
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports bond0
> + bridge-stp off
> + bridge-fd 0
>
> ----
>
> diff --git a/pvecm.adoc b/pvecm.adoc
> index 4bf2f59..2866582 100644
> --- a/pvecm.adoc
> +++ b/pvecm.adoc
> @@ -1256,9 +1256,9 @@ iface vmbr0 inet static
> address 192.X.Y.57
> netmask 255.255.250.0
> gateway 192.X.Y.1
> - bridge_ports eno1
> - bridge_stp off
> - bridge_fd 0
> + bridge-ports eno1
> + bridge-stp off
> + bridge-fd 0
>
> # cluster network
> auto eno2
> --
> 2.20.1
>
>
> _______________________________________________
> pve-devel mailing list
> pve-devel@pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
>
>
^ permalink raw reply [flat|nested] only message in thread